Notice for TAIYO YUDEN products
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2009. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this catalog or individual
specification.
■ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is
available.
■ Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■ All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, submarine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliability evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distributors (so called“TAIYO YUDEN’
s official sales channel”
).
It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel.
■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of
products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to“Foreign Exchange and Foreign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
Should you have any question or inquiry on this matter, please contact our sales staff.
1
notice_e-01
HIGH VALUE MULTILAYER CERAMIC CAPACITORS
WAVE
■ FEATURES
■ APPLICATIONS
◦ T he use of nickel as electrode material and plating processing improve the solderability and heat resistance characteristics. It also
prevents migration and raises the level of reliability.
◦ General digital circuit
◦ Low equivalent series resistance(ESR) provides superior noise absorption characteristics.
◦ Compared to tantalum or aluminum electrolytic capacitors, multilayer
ceramic capacitors offer a number of superior features, including:
Higher permissible ripple current values
Smaller case sizes with high rated voltage
Improved reliability due to higher insulation resistance and breakdown
voltage.
REFLOW
◦ Power supply bypass capacitors
Liquid crystal modules
Liquid crystal drive voltage lines
LSI, IC, converters(both for input and output)
◦ Smoothing capacitors
DC-DC converters (for both input and output)
Switching power supplies (secondary side)
■ ORDERING CODE
J
M K
❶
❷
❶Rated
voltage
〔VDC〕
A
4
J 6.3
L 10
E 16
T 25
G 35
U 50
3
❸
❷Series name
Multilayer
M ceramic
capacitor
❸End
termination
K Plated
1
6
B
❹
J
❺
❹Dimensions（EIA）
L×W（mm）
107
（0603） 1.6×0.8
212
（0805） 2.0×1.25
316
（1206） 3.2×1.6
（1210） 3.2×2.5
325
1
0
6
M
L
-
T △
❼
❽
❾
❿
❻
❺Temperature
characteristics code
B
BJ
X5R
B7
X7R
F
△F
Y5V
△＝Blank space
❻Nominal
capacitance
〔pF〕
example
473
47,000
105 1,000,000
❼Capacitance
tolerance
K
±10％
M
±20％
Z
＋80
－20
❽
Thickness
〔mm〕
K 0.45
A
0.8
D 0.85
G 1.25
L
1.6
N
1.9
Y 2.0max
M
2.5
％
⓫Internal code
Standard
△
product
△＝Blank space
❾Special
code
Standard
－
product
T
P
⓫
❿Packaging
φ178mm Taping
（4mm pitch）
All types
φ178mm Taping
（4mm pitch,
1000pcs/reel）
1210Type
Thickness：M
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
Type
（EIA）
□MK107
（0603）
□MK212
（0805）
□MK316
（1206）
Note:
＊1. Inclulding dimension tolerance±
0.15mm（±0.006 inch）.
＊2. Inclulding dimension tolerance±
0.3mm（±0.012 inch）.
＊3. Inclulding dimension tolerance±
0.2mm（±0.008 inch）.
＊4. Inclulding dimension tolerance＋
0.15/－0.1mm（＋0.006/－0.004
inch）.
□MK325
（1210）
L
W
T
*3,*4
*3,*4
0.45±0.05
（0.018±0.002）
0.8±0.10
1.6±0.10
（0.063±0.004）（0.031±0.004） 0.8±0.10 *3,*4
（0.031±0.004）
0.45±0.05
（0.018±0.002）
*1,*3
*1,*3
2.0±0.10
1.25±0.10
0.85±0.10
（0.033±0.004）
（0.079±0.004）（0.049±0.004）
*1,*3
1.25±0.10 （0.049±0.004）
0.85±0.10
（0.033±0.004）
*3
*3
3.2±0.15
1.6±0.15
1.25±0.10
（0.049±0.004）
（0.126±0.006）（0.063±0.006）
1.6±0.20
（0.063±0.008）
0.85±0.10
（0.033±0.004）
*2
1.9±0.20
（0.075±0.008）
3.2±0.30
2.5±0.20
＋0.004
（0.126±0.012）（0.098±0.008）
1.9＋0.1
－0.2（0.075－0.008 ）
*2
2.5±0.20 （0.098±0.008）
e
K
0.35±0.25
A （0.014±0.010）
K
0.5±0.25
D
（0.020±0.010）
G
D
0.5＋0.35
－0.25
G
（0.020＋0.014
－0.010 ）
L
D
N
0.6±0.3
Y （0.024±0.012）
M
Standard quantity [pcs]
Paper tape Embossed tape
4000
—
4000
—
4000
3000
—
3000
2000
—
2000
—
500
（T）, 1000
（P）
Unit：mm
（inch）
■ AVAILABLE CAPACITANCE RANGE
Type
107
212
316
325
TC X7R
B/X5R
X5R
F/Y5V
X7R
B/X5R
X5R
F/Y5V
X7R
B/X5R
X5R
F/Y5V
X7R
B/X5R
X5R
F/Y5V
Cap VDC 16 10 6.3 35 25 16 10 6.3 50 10 6.3 4 50 25 16 10 50 35 25 16 10 6.3 50 25 16 10 6.3 50 25 16 10 6.3 50 16 10 6.3 50 25 16 10 6.3 50 25 16 10 6.3 50 25 10 6.3 4 35 25 16 10 25 16 10 35 25 16 10 6.3 50 35 16 10 6.3 16 10 6.3
［μF］3[digits]
0.1 104
A
G
G
0.15 154
0.22 224 A A A
A A A
A
G
G
L
0.33 334
0.47 474 A A A
A A A
A A
G
G
G
L
0.68 684
A
A A
GGGG
G
G
L L
L
1 105 A A A A A A A
2.2 225
A A A
A A
GG
GGG
G
L L L
L L
N
3.3 335
N
N
4.7 475
A A
GG
GGG
G
G
L
L L
L
N N
N N
MN
6.8 685
M
10 106
A A A
G
GGG
GG
L L L L
L L L
L
L L L
N N M.N N N
N N
22 226
A
GG
L L L
L
M M.Y Y
N
47 476
G
L L
M M M.N
100 107
L L
M M.Y
Note : Letters in the table indicate thickness.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
4
1
mlcc01_e-01
●Low Profile Multilayer Ceramic Capacitors
Type
107
X5R
TC B/X5R
Cap VDC 10 6.3 25 16 10 6.3
［μF］3[digits]
0.1 104
0.22 224
0.33 334
0.47 474
0.68 684
1 105 K K K K
2.2 225
K K
3.3 335
4.7 475
K K
6.8 685
10 106
22 226
47 476
212
316
325
X7R B/X5R
X5R
F/Y5V
B/X5R
X5R
F/Y5V
B/X5R
16 10 25 16 10 25 16 10 6.3 50 10 6.3 50 25 16 10 6.3 25 16 10 6.3 50 35 10 6.3 25 16 10
D
D
D
D D D D D
D D D D D
D D D
D D
D D D
D
K Ｄ・K
D
D D Ｄ・K
D
G
D
D D
D D
D
Capacitance
tolerance
〔％〕
±10（K）
±20（M）
＋80
（Z）
－20
D
D
G D
D D D D
Temperature characteristics
Temp.
char. Applicable Temperature Ref. Capacitance
Code standard range〔℃〕 Temp. change〔％〕
〔℃〕
±10
JIS B －25～＋85 20
BJ
EIA X5R －55～＋85 25
±15
±15
B7 EIA X7R －55～＋125 25
JIS F －25～＋85 20 ＋30/－80
F
EIA Y5V －30～＋85 25 ＋22/－82
D D D D
D
■ PART NUMBERS
●107TYPE
【Temp.char. BJ:B/X5R】
Rated
Voltage
50V
35V
25V
16V
10V
6.3V
4V
Ordering code
UMK107 BJ105□A*1
GMK107 BJ105□A*1
TMK107 BJ105□K *1
TMK107 BJ224□A
TMK107 BJ474□A*1
TMK107 BJ105□A*1
EMK107 BJ105□K *1
EMK107 BJ224□A
EMK107 BJ474□A
EMK107 BJ105□A*1
EMK107 BJ225□A*1
LMK107 BJ105□K *1
LMK107 BJ225□K *1
LMK107 BJ475MK *1,*4
LMK107 BJ224□A
LMK107 BJ474□A
LMK107 BJ105□A*1
LMK107 BJ225□A*1
LMK107 BJ475□A*1
LMK107 BJ106MA*1,*4
JMK107 BJ105□K *1
JMK107 BJ225□K *1
JMK107 BJ475MK *1
JMK107 BJ225□A*1
JMK107 BJ475□A*1
JMK107 BJ106MA*1
AMK107 BJ106MA*1
AMK107 BJ226MA*1,*3
EHS
（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Soldering
Capacitance Temperature Dissipation factor
method
Capacitance
Thickness
〔μF〕
characteristics
〔mm〕
〔%〕Max.
R:Reflow soldering tolerance
W:Wave soldering
1
X5R
10
0.8±0.1
1
B/X5R
5
0.8±0.1
R
1
X5R
10
0.45±0.05
0.22
B/X5R
3.5
R/W
0.8±0.1
0.47
B/X5R
3.5
0.8±0.1
1
B/X5R
5
0.8±0.1
R
±10%
1
X5R
10
0.45±0.05
±20%
2
3.5
R/W
0.8±0.1
0.22
B/X5R*
3.5
0.8±0.1
0.47
B/X5R*2
1
B/X5R*2
5
0.8±0.1
2.2
B/X5R
10
0.8±0.1
R
1
B/X5R
10
0.45±0.05
2.2
X5R
10
0.45±0.05
4.7
X5R
10
±20%
0.45±0.05
3.5
R/W
0.8±0.1
0.22
B/X5R*2
3.5
0.8±0.1
0.47
B/X5R*2
±10%
1
B/X5R*2
5
0.8±0.1
±20%
2.2
B/X5R
10
0.8±0.1
4.7
X5R
10
0.8±0.1
10
X5R
10
±20%
0.8±0.2
0.45±0.05
1
B/X5R
10
±10%
±20%
2.2
X5R
10
0.45±0.05
R
4.7
X5R
10
±20%
0.45±0.05
0.8±0.1
2.2
B/X5R
10
±10%
±20%
4.7
X5R
10
0.8±0.1
10
X5R
10
0.8＋0.15/－0.1
10
X5R
10
0.8±0.1
±20%
22
X5R
10
0.8±0.2
CAPACITORS
Note : Letters in the table indicate thickness.
【Temp.char. B7:X7R】
Rated
Voltage
16V
10V
6.3V
Ordering code
EMK107 B7 224□A*1
EMK107 B7 474□A*1
EMK107 B7 105□A*1
LMK107 B7 224□A
LMK107 B7 474□A
LMK107 B7 105□A*1
JMK107 B7 224□A
JMK107 B7 474□A
JMK107 B7 105□A*1
EHS
（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Soldering
Capacitance Temperature Dissipation factor
method
Capacitance
〔μF〕
characteristics
〔%〕Max.
R:Reflow soldering tolerance
W:Wave soldering
0.22
X7R
3.5
R/W
0.47
X7R
3.5
R
1
X7R
5
X7R
3.5
R/W
0.22
±10%
X7R
3.5
0.47
±20%
R
1
X7R
5
X7R
3.5
R/W
0.22
X7R
3.5
0.47
R
1
X7R
5
EHS
（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Soldering
Capacitance Temperature Dissipation factor
method
Capacitance
〔μF〕
characteristics
〔%〕Max.
R:Reflow soldering tolerance
W:Wave soldering
7
0.1
F/Y5V
F/Y5V
7
0.47
R/W
F/Y5V
7
0.22
F/Y5V
7
0.47
＋80％
ー20%
16
1
F/Y5V
16
2.2
F/Y5V
R
16
1
F/Y5V
16
2.2
F/Y5V
Thickness
〔mm〕
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
【Temp.char. F:F/Y5V】
Rated
Voltage
50V
25V
16V
10V
Ordering code
UMK107 F104ZA
TMK107 F474ZA
EMK107 F224ZA
EMK107 F474ZA
EMK107 F105ZA
EMK107 F225ZA
LMK107 F105ZA
LMK107 F225ZA
Thickness
〔mm〕
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
□ Please specify the capacitance tolerance code. *1
*1
*1 1.5 times the rated voltage is applied to the chip during the high temperature loading test. *2
*2
*2 We may provide X7R for some items according to the individual specification. *3 The exchange of individual specification is necessary depending on the application and circuit condition. Please contact Taiyo Yuden sales
channels. *4 "D" is used for the internal code.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc01_e-01
1
5
■ PART NUMBERS
●212TYPE
【Temp.char. BJ:B/X5R】
Rated
Voltage
50V
25V
16V
10V
6.3V
Ordering code
UMK212 BJ104□G
UMK212 BJ224□G*1
UMK212 BJ474□G*1
UMK212 BJ105□G*1
TMK212 BJ474□D
TMK212 BJ105□D
TMK212 BJ225□D*1
TMK212 BJ475□D*1*4
TMK212 BJ225□G*1
TMK212 BJ475□G*1
EMK212 BJ105□D
EMK212 BJ225□D
EMK212 BJ475□D*1
EMK212 BJ106□D*1,*4
EMK212 BJ225□G
EMK212 BJ475□G*1
EMK212 BJ106□G*1
LMK212 BJ475□K*1
LMK212 BJ105□D
LMK212 BJ225□D
LMK212 BJ475□D
LMK212 BJ106□D*1
LMK212 BJ225□G
LMK212 BJ475□G
LMK212 BJ106□G
LMK212 BJ226MG*1
EHS
（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
JMK212 BJ475□K*1
RoHS
JMK212 BJ106MK*1
JMK212 BJ475□D
JMK212 BJ106□D
JMK212 BJ226MD*1
JMK212 BJ475□G
JMK212 BJ106□G
JMK212 BJ226MG*1
JMK212 BJ476MG*1
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Soldering
Capacitance Temperature Dissipation factor
method
Capacitance
〔μF〕
characteristics
〔%〕Max.
R:Reflow soldering tolerance
W:Wave soldering
3.5
0.1
B/X5R*2
0.22
B/X5R*2
3.5
R/W
2
0.47
B/X5R*
3.5
1
X5R
5
B/X5R
3.5
0.47
5
1
B/X5R
2.2
B/X5R
5
4.7
X5R
10
2.2
B/X5R
5
4.7
X5R
10
5
1
B/X5R*2
5
2.2
B/X5R*2
±10%
4.7
B/X5R
10
±20%
10
X5R
10
2.2
B/X5R*2
5
4.7
B/X5R*2
5
10
X5R
10
4.7
X5R
10
3.5
1
B/X5R*2
5
2.2
B/X5R*2
R
10
4.7
B/X5R
10
X5R
10
5
2.2
B/X5R*2
5
4.7
B/X5R*2
10
10
X5R
22
X5R
10
±20%
±10%
4.7
X5R
10
±20%
10
X5R
10
±20%
10
4.7
X5R
±10%
±20%
10
10
X5R
22
X5R
10
±20%
5
4.7
B/X5R
±10%
±20%
10
10
X5R*2
22
47
X5R
X5R
10
10
±20%
Thickness
〔mm〕
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
1.25±0.1
1.25±0.15
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
1.25±0.1
1.25±0.15
1.25±0.15
0.45±0.05
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
1.25±0.1
1.25±0.15
1.25±0.15
1.25±0.2
0.45±0.05
0.45±0.05
0.85±0.1
0.85±0.1
0.85±0.1
1.25±0.15
1.25±0.15
1.25±0.15
1.25±0.2
【Temp.char. B7:X7R】
Rated
Voltage
50V
35V
25V
16V
10V
6.3V
Ordering code
UMK212 B7 104□G
UMK212 B7 224□G*1
UMK212 B7 474□G*1
GMK212 B7 105□G*1
TMK212 B7 105□G*1
EMK212 B7 474□D
EMK212 B7 105□D
EMK212 B7 225□D*1
EMK212 B7 105□G
EMK212 B7 225□G*1
EMK212 B7 475□G*1
LMK212 B7 105□D
LMK212 B7 225□D
LMK212 B7 105□G
LMK212 B7 225□G
LMK212 B7 475□G*1
JMK212 B7 106□G*1
EHS
（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Soldering
Capacitance Temperature Dissipation factor
method
Capacitance
〔μF〕
characteristics
〔%〕Max.
R:Reflow soldering tolerance
W:Wave soldering
0.1
X7R
3.5
0.22
X7R
3.5
R/W
0.47
X7R
3.5
1
X7R
3.5
1
X7R
5
R
0.47
X7R
3.5
R/W
1
X7R
5
R
2.2
X7R
5
±10%
1
X7R
3.5
R/W
±20%
2.2
X7R
10
4.7
X7R
10
R
1
X7R
3.5
2.2
X7R
5
1
X7R
3.5
R/W
2.2
X7R
5
R
4.7
X7R
10
R/W
10
X7R
10
R
EHS
（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Soldering
Capacitance Temperature Dissipation factor
method
Capacitance
〔μF〕
characteristics
〔%〕Max.
R:Reflow soldering tolerance
W:Wave soldering
0.22
F/Y5V
7
0.47
F/Y5V
7
R/W
1
F/Y5V
7
2.2
F/Y5V
7
＋80%
2.2
F/Y5V
9
ー20%
4.7
F/Y5V
9
R
10
F/Y5V
16
4.7
F/Y5V
16
10
F/Y5V
16
Thickness
〔mm〕
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
0.85±0.1
0.85±0.1
0.85±0.1
1.25±0.1
1.25±0.1
1.25±0.1
0.85±0.1
0.85±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.15
【Temp.char. F:F/Y5V】
Rated
Voltage
50V
16V
10V
6.3V
Ordering code
UMK212 F224ZD
UMK212 F474ZG
UMK212 F105ZG
EMK212 F225ZG
LMK212 F225ZD
LMK212 F475ZG
LMK212 F106ZG
JMK212 F475ZD
JMK212 F106ZG
Thickness
〔mm〕
0.85±0.1
1.25±0.1
1.25±0.1
1.25±0.1
0.85±0.1
1.25±0.1
1.25±0.1
0.85±0.1
1.25±0.1
□ Please specify the capacitance tolerance code. *1
*1
*1 1.5 times the rated voltage is applied to the chip during the high temperature loading test. *2
*2
*2 We may provide X7R for some items according to the individual specification. *4 "D" is used for the internal code.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
6
1
mlcc01_e-01
■ PART NUMBERS
●316TYPE
【Temp.char. BJ:B/X5R】
Rated
Voltage
50V
25V
10V
UMK316 BJ105□D*1
UMK316 BJ225□D*1
UMK316 BJ105□L
UMK316 BJ475□L*1
TMK316 BJ105□D
TMK316 BJ225□D*1
TMK316 BJ475□D*1
TMK316 BJ106□D*1
TMK316 BJ225□L
TMK316 BJ475□L*1
TMK316 BJ106□L*1
EMK316 BJ225□D
EMK316 BJ475□D
EMK316 BJ106□D*1
EMK316 BJ225□L
EMK316 BJ475□L
EMK316 BJ106□L*1
EMK316 BJ226ML*1
LMK316 BJ475□D
LMK316 BJ106□D
LMK316 BJ226MD*1
LMK316 BJ106□L
RoHS
LMK316 BJ226ML*1
LMK316 BJ476ML*1
RoHS
RoHS
JMK316 BJ106□D
RoHS
1
6.3V
4V
EHS
（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
JMK316 BJ226MD*
JMK316 BJ476MD*1
JMK316 BJ106□L
JMK316 BJ226□L
JMK316 BJ476ML
JMK316 BJ107ML*1,*3
AMK316 BJ107ML*1
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Soldering
Capacitance Temperature Dissipation factor
method
Capacitance
〔μF〕
characteristics
〔%〕Max.
R:Reflow soldering tolerance
W:Wave soldering
1
B/X5R
3.5
2.2
B/X5R
3.5
2
3.5
1
B/X5R*
4.7
X5R
10
3.5
1
B/X5R
2.2
B/X5R
3.5
4.7
X5R
5
R
10
X5R
10
±10%
3.5
2.2
B/X5R*2
±20%
4.7
B/X5R
5
10
X5R*2
5
2.2
B/X5R
3.5
4.7
X5R
5
10
X5R
10
3.5
R/W
2.2
B/X5R*2
4.7
B/X5R
5
2
10
B/X5R*
5
22
B/X5R
10
±20%
5
4.7
B/X5R
±10%
±20%
10
10
B/X5R
22
X5R
10
±20%
±10%
5
10
B/X5R*2
±20%
22
B/X5R
10
±20%
47
X5R
10
R
±10%
10
10
B/X5R
±20%
22
X5R
10
±20%
47
X5R
10
2
5
10
B/X5R*
±10%
±20%
10
22
B/X5R
47
100
100
10
10
10
X5R
X5R
X5R
±20%
Thickness
〔mm〕
0.85±0.1
0.85±0.1
1.6±0.2
1.6±0.2
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
1.6±0.2
1.6±0.2
1.6±0.2
0.85±0.1
0.85±0.1
0.85±0.1
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
0.85±0.1
0.85±0.1
0.85±0.1
CAPACITORS
16V
Ordering code
1.6±0.2
1.6±0.2
1.6±0.2
0.85±0.1
0.85±0.1
0.85±0.1
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
□ Please specify the capacitance tolerance code.
*1 1.5 times the rated voltage is applied to the chip during the high temperature loading test.
*2 We may provide X7R for some items according to the individual specification.
*3 The exchange of individual specification is necessary depending on the application and circuit condtion. Please contact Taiyo Yuden sales channels.
【Temp.char. B7:X7R】
Rated
Voltage
50V
25V
16V
10V
6.3V
Ordering code
UMK316 B7 224□L
UMK316 B7 474□L
UMK316 B7 105□L
TMK316 B7 105□L
TMK316 B7 225□L
TMK316 B7 106□L*1,*4
EMK316 B7 225□L
EMK316 B7 106□L*4
LMK316 B7 225□L
LMK316 B7 475□L
LMK316 B7 106□L*1,*4
JMK316 B7 106□L
EHS
（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Soldering
Capacitance Temperature Dissipation factor
method
Capacitance
〔μF〕
characteristics
〔%〕Max.
R:Reflow soldering tolerance
W:Wave soldering
X7R
2.5
0.22
X7R
3.5
0.47
R/W
1
X7R
3.5
1
X7R
3.5
3.5
2.2
X7R
R
10
X7R
10
±10%
±20%
3.5
R/W
2.2
X7R
10
X7R
10
R
3.5
R/W
2.2
X7R
5
4.7
X7R
10
X7R
10
R
5
10
X7R
Thickness
〔mm〕
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
□ Please specify the capacitance tolerance code.
*1 1.5 times the rated voltage is applied to the chip during the high temperature loading test.
*4 "D" is used for the internal code.
【Temp.char. F:F/Y5V】
Rated
Voltage
50V
35V
25V
16V
10V
6.3V
Ordering code
UMK316 F225ZG
GMK316 F475ZG
GMK316 F106ZL
TMK316 F106ZL
EMK316 F106ZL
LMK316 F475ZD
LMK316 F226ZL
JMK316 F106ZD
EHS
（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Soldering
Capacitance Temperature Dissipation factor
method
Capacitance
〔μF〕
characteristics
〔%〕Max.
R:Reflow soldering tolerance
W:Wave soldering
7
R/W
2.2
F/Y5V
7
4.7
F/Y5V
9
10
F/Y5V
9
10
F/Y5V
＋80%
ー20%
9
R
10
F/Y5V
9
4.7
F/Y5V
16
22
F/Y5V
16
10
F/Y5V
Thickness
〔mm〕
1.25±0.1
1.25±0.1
1.6±0.2
1.6±0.2
1.6±0.2
0.85±0.1
1.6±0.2
0.85±0.1
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc01_e-01
1
7
■ PART NUMBERS
●325TYPE
【Temp.char. BJ:B/X5R】
Rated
Voltage
50V
35V
25V
16V
10V
6.3V
Ordering code
UMK325 BJ475MM*1
UMK325 BJ106MM*1
GMK325 BJ225MN
GMK325 BJ475MN*1
GMK325 BJ106MN*1
TMK325 BJ106MD*1
TMK325 BJ335MN
TMK325 BJ475MN
TMK325 BJ106MN
TMK325 BJ106MM*1
EMK325 BJ106MD*1
EMK325 BJ226MD*1
EMK325 BJ475MN
EMK325 BJ106MN
EMK325 BJ226MM*1
EMK325 BJ476MM*1
LMK325 BJ335MD
LMK325 BJ475MD
LMK325 BJ106MD*1
LMK325 BJ226MY*1
LMK325 BJ106MN
LMK325 BJ226MM
LMK325 BJ476MM*1
LMK325 BJ107MM*1
JMK325 BJ226MY
JMK325 BJ107MY*1
JMK325 BJ476MN*1
JMK325 BJ476MM*1
JMK325 BJ107MM*1
EHS
（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Capacitance
〔μF〕
4.7
10
2.2
4.7
10
10
3.3
4.7
10
10
10
22
4.7
10
22
47
3.3
4.7
10
22
10
22
47
100
22
100
47
47
100
Soldering
Temperature Dissipation factor
method
Capacitance
Thickness
characteristics
〔mm〕
〔%〕Max.
R:Reflow soldering tolerance
W:Wave soldering
X5R
5
2.5±0.2
X5R
5
2.5±0.2
3.5
1.9±0.2
B/X5R
X5R
10
1.9±0.2
B/X5R
5
1.9±0.2
B/X5R
5
0.85±0.1
3.5
1.9±0.2
B/X5R*2
3.5
1.9±0.2
B/X5R*2
5
1.9±0.2
B/X5R
B/X5R*2
3.5
2.5±0.2
B/X5R
5
0.85±0.1
B/X5R
10
0.85±0.1
2
3.5
1.9±0.2
B/X5R*
3.5
1.9±0.2
B/X5R
R
±20%
B/X5R
5
2.5±0.2
X5R
10
2.5±0.2
3.5
0.85±0.1
B/X5R
5
0.85±0.1
B/X5R
B/X5R
5
0.85±0.1
B/X5R
5
1.9＋0.1/ー0.2
3.5
1.9±0.2
B/X5R*2
5
2.5±0.2
B/X5R
X5R
10
2.5±0.2
X5R
10
2.5±0.3
5
1.9＋0.1/ー0.2
B/X5R
X5R
10
1.9＋0.1/ー0.2
X5R
10
1.9±0.2
X5R
10
2.5±0.2
X5R
10
2.5±0.3
□ Please specify the capacitance tolerance code.
*1 1.5 times the rated voltage is applied to the chip during the high temperature loading test.
*2 We may provide X7R for some items according to the individual specification.
【Temp.char. B7:X7R】
Rated
Voltage
25V
16V
10V
Ordering code
TMK325 B7 335MN
TMK325 B7 475MN*1
EMK325 B7 475MN
LMK325 B7 106MN
EHS
（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
Capacitance
〔μF〕
3.3
4.7
4.7
10
Soldering
Temperature Dissipation factor
method
Capacitance
characteristics
〔%〕Max.
R:Reflow soldering tolerance
W:Wave soldering
3.5
X7R
X7R
3.5
R
±20%
3.5
X7R
3.5
X7R
Thickness
〔mm〕
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
□ Please specify the capacitance tolerance code.
*1 1.5 times the rated voltage is applied to the chip during the high temperature loading test.
【Temp.char. F:F/Y5V】
Rated
Voltage
16V
10V
6.3V
Ordering code
EMK325 F226ZN
LMK325 F226ZN
JMK325 F476ZN
EHS
（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
Capacitance
〔μF〕
22
22
47
Soldering
Temperature Dissipation factor
method
Capacitance
characteristics
〔%〕Max.
R:Reflow soldering tolerance
W:Wave soldering
16
F/Y5V
＋80％
16
F/Y5V
R
ー20%
16
F/Y5V
Thickness
〔mm〕
1.9±0.2
1.9±0.2
1.9±0.2
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
8
1
mlcc01_e-01
■ ELECTRICAL CHARACTERISTICS
●Example of Impedance ESR vs. Frequency characteristics
■ Taiyo Yuden multilayer ceramic capacitor
JMK107BJ106MA
AMK107BJ226MA
EMK212BJ106KG
JMK212BJ226MG
TMK316BJ106KL
JMK316BJ476ML
JMK316BJ107ML
GMK325BJ106MN
EMK325BJ476MM
JMK325BJ107MY
UMK107F104ZA
LMK107F105ZA
LMK107F225ZA
UMK212F224ZD
UMK212F105ZG
LMK212F106ZG
UMK316F225ZG
GMK316F106ZL
LMK316F226ZL
CAPACITORS
TMK107BJ105KA
JMK325F476ZN
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc01_e-01
1
9
STANDARD MULTILAYER CERAMIC CAPACITORS
（CLASS1:TEMPERATURE COMPENSATING TYPE）
REFLOW
■ FEATURES
■ APPLICATIONS
◦ Improved higher density mounting.
◦ General electronic equipment
◦ Monolithic structure provides higher reliability.
◦ Communication equipment
（cellular phone, wireless applications, etc.）
◦A wide range of capacitance values available in standard case sizes.
■ ORDERING CODE
U M K
❶
❷
1
0
❸
❶Rated voltage〔VDC〕
E
16
T
25
U
50
❷Series name
Multilayer ceramic
M
capacitor
5
C
❹
K
H
1
0
❺
❻
❺Temperature characteristics〔ppm/℃〕
C□：0
CH、CJ、CK
Tolerance
R□：－220 RH
H：±60
S□：－330 SH、SJ、SK
J：±120
T□：－470 TJ、TK
K：±250
U□：－750 UJ、UK
SL：＋350～－1000
□＝Tolerance
❸End termination
Plated
❹Dimensions（EIA）
L×W
〔mm〕
042
（01005） 0.4×0.2
（0201）
0.6×0.3
063
（0402）
1.0×0.5
105
Type
（EIA）
L
W
□MK042
（01005）
□MK063
（0201）
□MK105
（0402）
0.4±0.02
（0.016±0.001）
0.6±0.03
（0.024±0.001）
1.0±0.05
（0.039±0.002）
0.2±0.02
（0.008±0.001）
0.3±0.03
（0.012±0.001）
0.5±0.05
（0.020±0.002）
V － F △
❼
❽
❼Capacitance
tolerance
C
±0.25pF
D
±0.5pF
F
±1pF
J
±5%
K
±10%
T
e
0.2±0.02
（0.008±0.001）
0.3±0.03
（0.012±0.001）
0.5±0.05
（0.020±0.002）
❾
C
P, T
W,V
0.1±0.03
（0.004±0.001）
0.15±0.05
（0.006±0.002）
0.25±0.10
（0.010±0.004）
❿
⓫
❾Special code
Standard
－
Product
F
❿Packaging
φ178mm Taping
（2mm pitch）
⓫Internal code
Standard
Product
△＝Blank space
❽Thickness〔mm〕
C
0.2
0.3
P, T
V
0.5
W
0.5
❻Nominal capacitance
〔pF〕
example
0R5
0.5
010
1
100
10
※R＝decimal point
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
J
1
△
Standard quantity [pcs]
Paper tape
Embossed tape
20000
－
15000
－
10000
－
Unit：mm
（inch）
■ AVAILABLE CAPACITANCE RANGE
Type
042
063
C□
C□
U□
Cap Temp.char.
［pF］
VDC
16V
50V
25V
［pF：3digits］
0.5
0R5
1
010
1.5
1R5
2
020
P
3
030
4
040
5
050
T
6
060
7
070
8
080
9
090
10
100
C
12
120
15
150
18
180
22
220
T
27
270
33
330
39
390
47
470
56
560
68
680
82
820
100
101
120
121
150
151
180
181
220
221
270
271
330
331
390
391
470
471
560
561
680
681
820
821
1000
102
Note: Letters in the table indicate thickness.
105
C□
U□
SL
R□
S□
T□
W
W
50V
W
W
W
V
V
V
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
10
1
mlcc02_e-01
■ PART NUMBERS
●042TYPE
Class 1
Rated
Voltage
EMK042 CK0R5CC
EMK042 CK010CC
EMK042 CK1R5CC
EMK042 CK020CC
EMK042 CJ030CC
EMK042 CH040CC
EMK042 CH050CC
EMK042 CH060DC
EMK042 CH070DC
EMK042 CH080DC
EMK042 CH090DC
EMK042 CH100DC
EMK042 CH120JC
EMK042 CH150JC
EMK042 CH180JC
EMK042 CH220JC
EMK042 CH270JC
EMK042 CH330JC
EMK042 CH390JC
EMK042 CH470JC
EMK042 CH560JC
EMK042 CH680JC
EMK042 CH820JC
EMK042 CH101JC
EHS
（Environmental Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Capacitance
〔pF〕
0.5
1
1.5
2
3
4
5
6
7
8
9
10
12
15
18
22
27
33
39
47
56
68
82
100
Temperature
characteristics
（EIA）
Q
410
420
430
440
460
480
500
520
540
560
580
600
640
700
760
840
940
1000
1000
1000
1000
1000
1000
1000
CK
CJ
CH
Soldering method
R:Reflow soldering
W:Wave soldering
Thickness
〔mm〕
（inch）
Capacitance
tolerance
±0.25pF
±0.5pF
0.2±0.02
（0.008±0.001）
R
CAPACITORS
16V
Ordering code
±5%
Note: "W" is used for the internal code.
Note: Please contact Taiyo Yuden sales channels about items (capacitance, tolerance, and temperature characteristics) other than listed above.
●063TYPE
Class1【C△ characteristic】
Rated
Voltage
50V
Ordering code
UMK063 CK0R5CP
UMK063 CK010CP
UMK063 CK1R5CP
UMK063 CK020CP
UMK063 CJ030CP
UMK063 CH040CP
UMK063 CH050CP
UMK063 CH060DP
UMK063 CH070DP
UMK063 CH080DT
UMK063 CH090DT
UMK063 CH100DT
UMK063 CH120JT
UMK063 CH150JT
UMK063 CH180JT
UMK063 CH220JT
UMK063 CH270JT
UMK063 CH330JT
UMK063 CH390JT
UMK063 CH470JT
UMK063 CH560JT
UMK063 CH680JT
UMK063 CH820JT
UMK063 CH101JT
EHS
（Environmental Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Capacitance
〔pF〕
0.5
1
1.5
2
3
4
5
6
7
8
9
10
12
15
18
22
27
33
39
47
56
68
82
100
Temperature
characteristics
（EIA）
Q
410
420
430
440
460
480
500
520
540
560
580
600
640
700
760
840
940
1000
1000
1000
1000
1000
1000
1000
CK
CJ
CH
Soldering method
R:Reflow soldering
W:Wave soldering
Thickness
〔mm〕
（inch）
Capacitance
tolerance
±0.25pF
±0.5pF
R
0.3±0.03
（0.012±0.001）
±5%
Note: "G" is used for the special code when the capacitance is less than 8pF.
Note: Please contact Taiyo Yuden sales channels about items (capacitance, tolerance, and temperature characteristics) other than listed above.
Class1【U△ characteristic】
Rated
Voltage
25V
Ordering code
TMK063
TMK063
TMK063
TMK063
TMK063
TMK063
TMK063
TMK063
TMK063
TMK063
TMK063
TMK063
TMK063
TMK063
UK0R5CT
UK010CT
UK1R5CT
UK020CT
UK030CT
UJ040CT
UJ050CT
UJ060DT
UJ070DT
UJ080DT
UJ090DT
UJ100DT
UJ120JT
UJ150JT
EHS
（Environmental Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Capacitance
〔pF〕
0.5
1
1.5
2
3
4
5
6
7
8
9
10
12
15
Temperature
characteristics
（EIA）
Q
410
420
430
440
460
480
500
520
540
560
580
600
640
700
UK
UJ
Soldering method
R:Reflow soldering
W:Wave soldering
Thickness
〔mm〕
（inch）
Capacitance
tolerance
±0.25pF
0.3±0.03
（0.012±0.001）
R
±0.5pF
±5%
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc02_e-01
1
11
■ PART NUMBERS
●105TYPE
Class1【C△ characteristic】
Rated
Voltage
50V
Ordering code
UMK105 CK0R5CW
UMK105 CK010CW
UMK105 CK1R5CW
UMK105 CK020CW
UMK105 CJ030CW
UMK105 CH040CW
UMK105 CH050CW
UMK105 CH060DW
UMK105 CH070DW
UMK105 CH080DV
UMK105 CH090DV
UMK105 CH100DV
UMK105 CH120JV
UMK105 CH150JV
UMK105 CH180JV
UMK105 CH220JV
UMK105 CH270JV
UMK105 CH330JV
UMK105 CH390JV
UMK105 CH470JV
UMK105 CH560JV
UMK105 CH680JV
UMK105 CH820JV
UMK105 CH101JV
UMK105 CH121JV
UMK105 CH151JV
UMK105 CH181JV
UMK105 CH221JV
UMK105 CH271JV
UMK105 CH331JV
EHS
（Environmental Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Capacitance
〔pF〕
0.5
1
1.5
2
3
4
5
6
7
8
9
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
Temperature
characteristics
（EIA）
Q
410
420
430
440
460
480
500
520
540
560
580
600
640
700
760
840
940
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
CK
CJ
CH
Soldering method
R:Reflow soldering
W:Wave soldering
Thickness
〔mm〕
（inch）
Capacitance
tolerance
±0.25pF
±0.5pF
0.5±0.05
（0.020±0.002）
R
±5%
Note: Please contact Taiyo Yuden sales channels about items (capacitance, tolerance, and characteristics) other than listed above.
Class1【U△ characteristic】
Rated
Voltage
Ordering code
EHS
（Environmental Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Capacitance
〔pF〕
Temperature
characteristics
（EIA）
UMK105 UK0R5CW
0.5
UMK105 UK010CW
1
UK
1.5
UMK105 UK1R5CW
2
UMK105 UK020CW
3
UMK105 UK030CW
4
UMK105 UJ040CW
5
UMK105 UJ050CW
6
UMK105 UJ060DW
UMK105 UJ070DW
7
8
UMK105 UJ080DW
9
UMK105 UJ090DW
10
UMK105 UJ100DW
12
UMK105 UJ120JW
15
UMK105 UJ150JW
18
UMK105 UJ180JW
50V
22
UMK105 UJ220JV
27
UMK105 UJ270JV
UJ
33
UMK105 UJ330JV
39
UMK105 UJ390JV
47
UMK105 UJ470JV
56
UMK105 UJ560JV
68
UMK105 UJ680JV
82
UMK105 UJ820JV
100
UMK105 UJ101JV
120
UMK105 UJ121JV
150
UMK105 UJ151JV
180
UMK105 UJ181JV
UMK105 UJ221JV
220
270
UMK105 UJ271JV
330
UMK105 UJ331JV
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
Q
410
420
430
440
460
480
500
520
540
560
580
600
640
700
760
840
940
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
Soldering method
R:Reflow soldering
W:Wave soldering
Thickness
〔mm〕
（inch）
Capacitance
tolerance
±0.25pF
±0.5pF
0.5±0.05
（0.020±0.002）
R
±5%
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
12
1
mlcc02_e-01
■ PART NUMBERS
Class1【SL characteristic】
Rated
Voltage
50V
Ordering code
UMK105 SL121JV
UMK105 SL151JV
UMK105 SL181JV
UMK105 SL221JV
UMK105 SL271JV
UMK105 SL331JV
EHS
（Environmental Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Capacitance
〔pF〕
120
150
180
220
270
330
Temperature
characteristics
（EIA）
Q
Soldering method
R:Reflow soldering
W:Wave soldering
Capacitance
tolerance
Thickness
〔mm〕
（inch）
SL
1000
1000
1000
1000
1000
1000
R
±5%
0.5±0.05
（0.020±0.002）
Temperature
characteristics
（EIA）
Q
Soldering method
R:Reflow soldering
W:Wave soldering
Capacitance
tolerance
Thickness
〔mm〕
（inch）
RH
512
536
564
600
640
700
760
800
R
±5%
0.5±0.05
（0.020±0.002）
Q
Soldering method
R:Reflow soldering
W:Wave soldering
Capacitance
tolerance
Thickness
〔mm〕
（inch）
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
Class1【RH characteristic】
50V
Ordering code
UMK105 RH5R6JW
UMK105 RH6R8JW
UMK105 RH8R2JW
UMK105 RH100JW
UMK105 RH120JW
UMK105 RH150JW
UMK105 RH180JW
UMK105 RH200JW
EHS
（Environmental Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Capacitance
〔pF〕
5.6
6.8
8.2
10
12
15
18
20
CAPACITORS
Rated
Voltage
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
Class1【S△ characteristic】
Rated
Voltage
50V
Ordering code
UMK105 SK0R5BW
UMK105 SK010BW
UMK105 SK1R2BW
UMK105 SK1R5BW
UMK105 SK1R8BW
UMK105 SK2R2JW
UMK105 SK2R7JW
UMK105 SJ3R3JW
UMK105 SJ3R9JW
UMK105 SH4R7JW
UMK105 SH5R6JW
UMK105 SH6R8JW
UMK105 SH8R2JW
UMK105 SH100JW
UMK105 SH120JW
UMK105 SH150JW
UMK105 SH180JW
UMK105 SH200JW
EHS
（Environmental Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Capacitance
〔pF〕
0.5
1
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
20
Temperature
characteristics
（EIA）
SK
SJ
SH
410
420
424
430
436
444
454
466
478
494
512
536
564
600
640
700
760
800
R
Q
Soldering method
R:Reflow soldering
W:Wave soldering
±0.1pF
0.5±0.05
（0.020±0.002）
±5%
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
Class1【T△ characteristic】
Rated
Voltage
50V
Ordering code
UMK105 TK0R5BW
UMK105 TK010BW
UMK105 TK1R2BW
UMK105 TK1R5BW
UMK105 TK1R8BW
UMK105 TK2R2JW
UMK105 TK2R7JW
UMK105 TK3R3JW
UMK105 TK3R9JW
UMK105 TJ4R7JW
UMK105 TJ5R6JW
UMK105 TJ6R8JW
UMK105 TJ8R2JW
UMK105 TJ100JW
UMK105 TJ120JW
UMK105 TJ150JW
UMK105 TJ180JW
UMK105 TJ200JW
EHS
（Environmental Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Capacitance
〔pF〕
0.5
1
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
20
Temperature
characteristics
（EIA）
410
420
424
430
436
444
454
466
478
494
512
536
564
600
640
700
760
800
TK
TJ
Thickness
〔mm〕
（inch）
Capacitance
tolerance
±0.1pF
0.5±0.05
（0.020±0.002）
R
±5%
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc02_e-01
1
13
STANDARD MULTILAYER CERAMIC CAPACITORS
（CLASS2 :HIGH DIELECTRIC CONSTANT TYPE）
REFLOW
■ FEATURES
■ APPLICATIONS
◦ Improved higher density mounting.
◦ General electronic equipment
◦ Monolithic structure provides higher reliability.
◦ Communication equipment
（cellular phone, wireless applications, etc.）
◦A wide range of capacitance values available in standard case sizes.
■ ORDERING CODE
L
M K
❶
❷
1
❸
❶Rated voltage〔VDC〕
A
4
J
6.3
L
10
E
16
T
25
G
35
U
50
0
5
B
❹
K
J
1
0
❺
❸End termination
Plated
❻
❺Temperature
characteristics code
❹Dimensions（EIA）
L×W
〔mm〕
042
（01005） 0.4×0.2
（0201）
0.6×0.3
063
（0402）
1.0×0.5
105
BJ
B
X5R
B7
X7R
△F
F
Y5V
4
❻Nominal capacitance
〔pF〕
example
102
1000
223
22000
K
V － F △
❼
❽
❾
＋80
－20 %
F
❿Packaging
φ178mm Taping
（2mm pitch）
❽Thickness〔mm〕
C
0.2
P
0.3
V
0.5
△＝Blank space
❷Series name
Multilayer ceramic
M
capacitor
⓫
❾Special code
Standard
－
Product
❼Capacitance
tolerance
K
±10%
M
±20%
Z
❿
⓫Internal code
Standard
Product
△＝Blank space
△
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
Type（EIA）
L
W
□MK042
0.4±0.02
0.2±0.02
（01005）
（0.016±0.001）
（0.008±0.001）
□MK063
0.6±0.03
0.3±0.03
（0201）
（0.024±0.001）
（0.012±0.001）
□MK105
1.0±0.05＊1
0.5±0.05＊1
（0402）
（0.039±0.002）
（0.020±0.002）
Note:＊1. Inclulding dimension tolerance±0.1mm
T
Standard quantity [pcs]
Embossed tape
Paper tape
e
0.2±0.02
（0.008±0.001）
0.3±0.03
（0.012±0.001）
0.5±0.05＊1
（0.020±0.002）
C
P
V
0.1±0.03
（0.004±0.001）
0.15±0.05
（0.006±0.002）
0.25±0.10
（0.010±0.004）
20000
－
15000
－
－
10000
（inch）
Unit：mm
■ AVAILABLE CAPACITANCE RANGE
Type
042
063
Temp.char. X7R B/X5R X5R X7R
B/X5R
X5R
VDC
10V 10V 6.3V 10V 25V 16V 25V 16V 10V 6.3V 10V 6.3V 4V 50V 25V
［pF：3digits］
100
101
150
151
220
221
P
C
C
330
331
470
471
680
681
P
1000
102
V
1500
152
2200
222
3300
332
C
C
P
P
V
4700
472
6800
682
10000
103
15000
153
P
P
22000
223
33000
333
47000
473
P
P
68000
683
100000
104
220000
224
P
330000
334
470000
474
1000000
105
2200000
225
3300000
335
4700000
475
Note : Letters in the table indicate thickness.
Cap
［pF］
Temp.char.Code
B/BJ
B7
F
Applicable standard
JIS
EIA
EIA
JIS
EIA
B
X5R
X7R
F
Y5V
105
X7R
B/X5R
X5R
F/Y5V
16V 10V 6.3V 50V 35V 25V 16V 10V 6.3V 16V 10V 6.3V 4V 50V 25V 16V 10V 6.3V
V
V
V
V
V
V
V
V
Temperature characteristics
Temperature range
〔℃〕
－25～＋85
－55～＋85
－55～＋125
－25～＋85
－30～＋85
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
Ref. Temp.
〔℃〕
20
25
25
20
25
Capacitance change
〔％〕
±10
±15
±15
＋30/－80
＋22/－82
Capacitance tolerance
〔％〕
±10（K）
±20（M）
＋80（Z）
－20
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
14
1
mlcc03_e-01
■ PART NUMBERS
●042TYPE
（01005 case size）
【Temp.char. BJ:B/X5R】
Rated
Voltage
Ordering code
Capacitance Temperature Dissipation factor
〔pF〕
〔%〕Max.
characteristics
100
LMK042 BJ101□C
LMK042 BJ151□C
150
LMK042 BJ221□C
220
B/X5R*2
LMK042 BJ331□C
330
LMK042 BJ471□C
470
LMK042 BJ681□C
680
10V
LMK042 BJ102□C
1000
1500
LMK042 BJ152□C* 1
LMK042 BJ222□C* 1
2200
1
3300
LMK042 BJ332□C*
X5R
4700
LMK042 BJ472□C* 1
6800
LMK042 BJ682□C* 1
10000
LMK042 BJ103□C* 1
1500
JMK042 BJ152□C* 1
1
JMK042 BJ222□C*
2200
3300
JMK042 BJ332□C* 1
B/X5R*2
6.3V
4700
JMK042 BJ472□C* 1
1
6800
JMK042 BJ682□C*
10000
JMK042 BJ103□C* 1
□ Please specify the capacitance tolerance code.
*1 1.5 times the rated voltage is applied to the chip during the high temperature loading test.
*2 We may provide X7R/X7S for some items according to the individual specification.
Note: "W" is used for the internal code.
Soldering method
R:Reflow soldering
W:Wave soldering
Capacitance
tolerance
R
±10%
±20%
Soldering method
R:Reflow soldering
W:Wave soldering
Capacitance
tolerance
R
±10%
±20%
Soldering method
R:Reflow soldering
W:Wave soldering
Capacitance
tolerance
Thickness
〔mm〕
（inch）
5
0.2±0.02
（0.008±0.001）
10
CAPACITORS
EHS
（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
【Temp.char. B7：X7R】
Rated
Voltage
Ordering code
LMK042 B7 101 □ C
LMK042 B7 151 □ C
LMK042 B7 221 □ C
10V
LMK042 B7 331 □ C
LMK042 B7 471 □ C
LMK042 B7 681 □ C
LMK042 B7 102 □ C
□ Please specify the capacitance tolerance code.
Note: "W" is used for the internal code.
EHS
（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Capacitance Temperature Dissipation factor
〔pF〕
〔%〕Max.
characteristics
100
150
220
330
470
680
1000
X7R
5
Thickness
〔mm〕
（inch）
0.2±0.02
（0.008±0.001）
●063TYPE
（0201 case size）
【Temp.char. BJ:B/X5R】
Rated
Voltage
25V
16V
10V
6.3V
Ordering code
TMK063 BJ101□P
TMK063 BJ151□P
TMK063 BJ221□P
TMK063 BJ331□P
TMK063 BJ471□P
TMK063 BJ681□P
TMK063 BJ102□P
TMK063 BJ152□P
TMK063 BJ222□P
TMK063 BJ332□P
TMK063 BJ472□P
TMK063 BJ682□P
TMK063 BJ103□P
EMK063 BJ152□P
EMK063 BJ222□P
EMK063 BJ332□P
EMK063 BJ472□P
EMK063 BJ682□P
EMK063 BJ103□P
LMK063 BJ223□P* 1
LMK063 BJ333□P* 1
LMK063 BJ473□P* 1
LMK063 BJ683□P* 1
LMK063 BJ104□P* 1
LMK063 BJ224MP* 1
JMK063 BJ223□P* 1
JMK063 BJ333□P* 1
JMK063 BJ473□P* 1
JMK063 BJ683□P* 1
JMK063 BJ104□P* 1
JMK063 BJ224MP* 1
EHS
（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Capacitance Temperature Dissipation factor
〔pF〕
〔%〕Max.
characteristics
100
150
220
330
470
680
1000
1500
2200
3300
4700
6800
10000
1500
2200
3300
4700
6800
10000
22000
33000
47000
68000
100000
220000
22000
33000
47000
68000
100000
220000
B/X5R*2
Thickness
〔mm〕
（inch）
3.5
B/X5R
±10%
±20%
5
0.3±0.03
R
B/X5R*2
（0.012±0.001）
B/X5R
7.5
X5R
10
±20%
B/X5R
7.5
X5R
±10%
±20%
10
±20%
To next page
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc03_e-01
1
15
■ PART NUMBERS
Rated
Voltage
Ordering code
EHS
（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
Capacitance Temperature Dissipation factor
〔pF〕
〔%〕Max.
characteristics
Soldering method
R:Reflow soldering
W:Wave soldering
Capacitance
tolerance
AMK063 BJ224MP* 1
220000
AMK063 BJ334MP*1,*3
330000
X5R
10
R
1, 3
470000
AMK063 BJ474MP* *
□ Please specify the capacitance tolerance code.
*1 1.5 times the rated voltage is applied to the chip during the high temperature loading test.
*2 We may provide X7R for some items according to the individual specification.
*3 The exchange of individual specification is necessary depending on the application and circuit condition. Please contact Taiyo Yuden sales channels.
4V
Thickness
〔mm〕
（inch）
0.3±0.03
±20%
（0.012±0.001）
【Temp.char. B7：X7R】
Rated
Voltage
Ordering code
TMK063 B7 101□P
TMK063 B7 151□P
TMK063 B7 221□P
25V
TMK063 B7 331□P
TMK063 B7 471□P
TMK063 B7 681□P
TMK063 B7 102□P
EMK063 B7 152□P
EMK063 B7 222□P
EMK063 B7 332□P
16V
EMK063 B7 472□P
EMK063 B7 682□P
EMK063 B7 103□P
□ Please specify the capacitance tolerance code.
EHS
（EnvironmenEnvironmen- Capacitance Temperature Dissipation factor
〔pF〕
〔%〕Max.
characteristics
tal Hazardous
Substances）
RoHS
100
RoHS
150
RoHS
220
3.5
RoHS
330
RoHS
470
RoHS
680
X7R
RoHS
1000
RoHS
1500
RoHS
2200
RoHS
3300
5
RoHS
4700
RoHS
6800
RoHS
10000
Soldering method
R:Reflow soldering
W:Wave soldering
Capacitance
tolerance
Thickness
〔mm〕
（inch）
R
±10%
±20%
0.3±0.03
（0.012±0.001）
●105TYPE
（0402 case size）
【Temp.char. BJ:B/X5R】
Rated
Voltage
50V
35V
25V
16V
10V
6.3V
4V
Ordering code
UMK105 BJ 221□V
UMK105 BJ 331□V
UMK105 BJ 471□V
UMK105 BJ 681□V
UMK105 BJ 102□V
UMK105 BJ 152□V
UMK105 BJ 222□V
UMK105 BJ 332□V
UMK105 BJ 472□V
UMK105 BJ 682□V* 1
UMK105 BJ 103□V
GMK105 BJ 104□V* 1
TMK105 BJ 153□V
TMK105 BJ 223□V
TMK105 BJ 333□V* 1
TMK105 BJ 473□V* 1
TMK105 BJ 104□V* 1
EMK105 BJ 153□V
EMK105 BJ 223□V
EMK105 BJ 333□V
EMK105 BJ 473□V
EMK105 BJ 683□V
EMK105 BJ 104□V* 1
EMK105 BJ 224□V* 1
EMK105 BJ 105□V* 1
LMK105 BJ 104□V
LMK105 BJ 224□V* 1
LMK105 BJ 474□V* 1
LMK105 BJ 105□V* 1
JMK105 BJ 224□V* 1
JMK105 BJ 474□V* 1
JMK105 BJ 105□V* 1
JMK105 BJ 225MV* 1
AMK105 BJ 335MV* 1,* 3
AMK105 BJ 475MV* 1
EHS
（EnvironmenEnvironmen- Capacitance Temperature Dissipation factor
〔pF〕
〔%〕Max.
characteristics
tal Hazardous
Substances）
RoHS
220
RoHS
330
RoHS
470
RoHS
680
RoHS
1000
2.5
B/X5R*2
RoHS
1500
RoHS
2200
RoHS
3300
RoHS
4700
RoHS
6800
RoHS
10000
3.5
RoHS
100000
B/X5R
5
RoHS
15000
RoHS
22000
3.5
B/X5R*2
RoHS
33000
RoHS
47000
RoHS
100000
B/X5R
5
RoHS
15000
RoHS
22000
3.5
B/X5R*2
RoHS
33000
RoHS
47000
RoHS
68000
B/X5R
RoHS
100000
B/X5R*2
5
RoHS
220000
B/X5R
RoHS
1000000
X5R
10
RoHS
100000
B/X5R
5
RoHS
220000
RoHS
470000
X5R
10
RoHS
1000000
RoHS
220000
B/X5R
5
RoHS
470000
RoHS
1000000
RoHS
2200000
X5R
10
RoHS
3300000
RoHS
Soldering method
R:Reflow soldering
W:Wave soldering
Capacitance
tolerance
±10%
±20%
R
±20%
4700000
Thickness
〔mm〕
（inch）
0.5±0.05
（0.02±0.002）
0.5±0.1
（0.02±0.004）
□ Please specify the capacitance tolerance code.
*1 1.5 times the rated voltage is applied to the chip during the high temperature loading test.
*2 We may provide X7R for some items according to the individual specification.
*3 The exchange of individual specification is necessary depending on the application and circuit condition. Please contact Taiyo Yuden sales channels.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
16
1
mlcc03_e-01
■ PART NUMBERS
【Temp.char. B7:X7R】
Rated
Voltage
Ordering code
Capacitance Temperature Dissipation factor
〔pF〕
〔%〕Max.
characteristics
UMK105 B7 221□V
220
UMK105 B7 331□V
330
470
UMK105 B7 471□V
680
UMK105 B7 681□V
1000
UMK105 B7 102□V
50V
UMK105 B7 152□V
1500
UMK105 B7 222□V
2200
UMK105 B7 332□V
3300
4700
UMK105 B7 472□V* 1
6800
UMK105 B7 682□V* 1
10000
UMK105 B7 103□V* 1
TMK105 B7 152□V
1500
TMK105 B7 222□V
2200
TMK105 B7 332□V
3300
25V
TMK105 B7 472□V
4700
TMK105 B7 682□V
6800
TMK105 B7 103□V
10000
EMK105 B7 223□V
22000
16V
EMK105 B7 473□V
47000
100000
EMK105 B7 104□V* 1
LMK105 B7 223□V
22000
LMK105 B7 473□V
47000
10V
LMK105 B7 104□V* 1
100000
6.3V
JMK105 B7 224□V* 1
220000
□ Please specify the capacitance tolerance code.
*1 1.5 times the rated voltage is applied to the chip during the high temperature loading test.
Soldering method
R:Reflow soldering
W:Wave soldering
Capacitance
tolerance
Thickness
〔mm〕
（inch）
R
±10%
±20%
0.5±0.05
（0.02±0.002）
Soldering method
R:Reflow soldering
W:Wave soldering
Capacitance
tolerance
Thickness
〔mm〕
（inch）
R
＋80％
ー20%
0.5±0.05
（0.02±0.002）
2.5
3.5
X7R
2.5
3.5
CAPACITORS
EHS
（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
5
3.5
5
【Temp.char. F:Y5V】
EHS
（Environmental Capacitance Temperature Dissipation factor
〔pF〕
〔%〕Max.
Hazardous
characteristics
Substances）
50V
UMK105 F103ZV
RoHS
10000
5
25V
TMK105 F223ZV
RoHS
22000
EMK105 F473ZV
RoHS
47000
7
16V
F/Y5V
EMK105 F104ZV
RoHS
100000
9
10V
LMK105 F224ZV
RoHS
220000
11
JMK105 F474ZV
RoHS
470000
12.5
6.3V
RoHS
1000000
20
JMK105 F105ZV*1
*1 1.5 times the rated voltage is applied to the chip during the high temperature loading test.
Rated
Voltage
Ordering code
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc03_e-01
1
17
MULTILAYER CERAMIC CAPACITORS
FOR HIGH FREQUENCY APPLICATIONS（1GHz+）
REFLOW
■ FEATURES
■ APPLICATIONS
◦ Q value in the high frequency range (1 GHz+) is superior compared to
other types of multilayer capacitors.
◦ Suitable for those high frequency applications in which a capacitor
with both a high Q-value and small size is required such as portable
communications and other wireless applications.
VCO, TCXO etc.
◦ The 1005(0402) case size is designed for high density mounting and
weight reduction in various applications.
◦ Adjustment of characteristics in high frequency circuit
■ ORDERING CODE
U
V
K
❶
❷
❸
❶Rated voltage〔VDC〕
E
16
U
50
V
❷Series name
Multilayer ceramic
capacitor for high
frequency
1
0
5
R
❹
❸End termination
K
Plated
❹Dimensions (EIA)
（L×W）
〔mm〕
105
（0402）
1.0×0.5
H
4
R
❺
3
❻
❺Temperature
❻Nominal capacitance
characteristics〔ppm/℃〕
〔pF〕
0±60
CH
example
－220±60
RH
020
2
4R3
4.3
※R＝Decimal point
J
W － F
❼
❽
❼Capacitance
tolerance
B
±0.1pF
J
±5％
❽Thickness〔mm〕
W
0.5
❾
❿
❾Special code
Standard
－
Product
F
❿Packaging
φ178mm Taping
（2mm pitch）
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
Type
（EIA）
L
W
T
e
□VK105
（0402）
1.0±0.05
（0.039±0.002）
0.5±0.05
（0.020±0.002）
0.5±0.05
（0.020±0.002）
0.25±0.1
（0.010±0.004）
Standard quantity [pcs]
Embossed tape
Paper tape
10000
－
Unit：mm
（inch）
■ SPECIFICATIONS
Temperature
Characteristics
Operating
Temperature range
CH
RH
－55～＋125℃
Temperature
Coefficient range
[ppm/℃]
0±60
－220±60
Capacitance
Tolerance
●Capacitance vs Q value（Typical for CH characteristic）
±0.1pF
（～2.0pF）
±5％（2.2pF～）
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
18
1
mlcc04_e-01
■ PART NUMBERS
Rated Voltage
（DC）
Ordering code
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Capacitance
〔pF〕
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
Capacitance
tolerance
±0.1pF
±5％
±0.1pF
±5％
Q
（at 1GHz）
（min.）
300
300
300
300
300
300
300
300
280
270
260
240
230
210
190
180
170
150
130
120
110
99
84
84
84
300
300
300
300
300
300
280
270
260
240
230
210
190
180
170
150
130
120
110
99
84
84
84
Thickness
[mm]
Typical Q
0.5±0.05
1200
1200
1200
1100
1100
1000
950
950
930
850
740
710
670
650
610
530
510
460
390
370
360
360
360
340
320
1100
1000
1000
970
950
900
900
740
700
680
640
620
570
480
470
420
360
350
340
340
340
320
310
CAPACITORS
□VK105 CH0R3BW
□VK105 CH0R4BW
□VK105 CH0R5BW
□VK105 CH0R6BW
□VK105 CH0R7BW
□VK105 CH0R8BW
□VK105 CH0R9BW
□VK105 CH010BW
□VK105 CH1R1BW
□VK105 CH1R2BW
□VK105 CH1R3BW
□VK105 CH1R5BW
□VK105 CH1R6BW
□VK105 CH1R8BW
□VK105 CH020BW
□VK105 CH2R2JW
□VK105 CH2R4JW
□VK105 CH2R7JW
□VK105 CH030JW
□VK105 CH3R3JW
□VK105 CH3R6JW
□VK105 CH3R9JW
□VK105 CH4R3JW
□VK105 CH4R7JW
E: 16V
U: 50V
□VK105 CH5R1JW
□VK105 RH0R5BW
□VK105 RH0R6BW
□VK105 RH0R7BW
□VK105 RH0R8BW
□VK105 RH0R9BW
□VK105 RH010BW
□VK105 RH1R1BW
□VK105 RH1R2BW
□VK105 RH1R3BW
□VK105 RH1R5BW
□VK105 RH1R6BW
□VK105 RH1R8BW
□VK105 RH020BW
□VK105 RH2R2JW
□VK105 RH2R4JW
□VK105 RH2R7JW
□VK105 RH030JW
□VK105 RH3R3JW
□VK105 RH3R6JW
□VK105 RH3R9JW
□VK105 RH4R3JW
□VK105 RH4R7JW
□VK105 RH5R1JW
□Please specify the Rated Voltage code.
Temperature
EHS
(Environmental characteristics
Hazardous
CH
RH
Substances)
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc04_e-01
1
19
SUPER LOW DISTORTION MULTILAYER
CERAMIC CAPACITORS（CFCAPTM）
REFLOW
■ FEATURES
■ APPLICATIONS
◦ Newly developed dielectric material and the use of nickel for internal
electrodes provide superior temperature characteristics with high capacitance, small case size and low cost.
◦ Signal line for AV products
◦ Low distortion and low shock noise make these capacitors appropriate for use in analog or digital mobile devices.
◦ Superior heat-resistance, high breakdown voltage, and mechanical
strength make these capacitors appropriate for replacing film capacitors.
◦ Analog signal coupling applications
◦ PLL circuit of mobile phones
◦ Good temperature characteristics for time constant circuits, oscillation circuits and filters
■ ORDERING CODE
T
M K
❶
❷
3
1
❸
6
S
❹
❶Rated
❸End
voltage〔VDC〕
termination
U
50
K
Plated
G
35
T
25
E
16
❷Series name
L
10
Multilayer ceramic
M
capacitor
J
6.3
D
1
0
❺
❹Dimensions (EIA)
（L×W）
〔mm〕
105
（0402）
1.0×0.5
（0603）
1.6×0.8
107
（0805）
2.0×1.25
212
316
（1206）
3.2×1.6
4
❻
❼Capacitance
tolerance
K
±10%
❺Series symbol
SD Standard
❻Nominal capacitance
〔μF〕
example
223
0.022
104
0.1
K
L － T △
❼
❽
❽Thickness
〔mm〕
P
0.3
V
0.5
A
0.8
D
0.85
F
1.15
G
1.25
L
1.6
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
Type（EIA）
L
□MK105
（0402）
1.0±0.05
（0.039±0.002）
□MK107
（0603）
1.6±0.10
（0.063±0.004）
□MK212
（0805）
2.0±0.10
（0.079±0.004）
□MK316
（1206）
3.2±0.15
（0.126±0.006）
W
T
❿
0.00039
0.00047
0.00056
0.00068
0.00082
0.001
0.0012
0.0015
0.0018
0.0022
0.0027
0.0033
0.0039
0.0047
0.0056
0.0068
0.0082
0.01
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.1
Type
Temp.Char
VDC
[pF:3digits]
391
471
561
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
50V
25V
△＝Blank space
❿Packaging
φ178mm Taping
（4mm pitch）
107, 212, 316 Type
φ178mm Taping
（2mm pitch）
105 Type
T
F
Standard quantity [pcs]
Embossed tape
Paper tape
0.25±0.10
（0.010±0.004）
10000
－
0.35±0.25
（0.014±0.010）
4000
－
4000
－
－
3000
0.5±0.25
（0.020±0.010）
＋0.35
0.5 ー0.25
3000
－
（0.020＋0.014
－0.010 ）
2000
Unit：mm
（inch）
■ AVAILABLE CAPACITANCE RANGE
Cap
[μF]
⓫
⓫Internal code
Standard
△
Product
❾Special code
Standard
－
Product
e
0.3±0.03
P
（0.012±0.001）
0.5±0.05
（0.020±0.002）
0.5±0.05
V
（0.020±0.002）
0.8±0.10
0.8±0.10
A
（0.031±0.004） （0.031±0.004）
0.85±0.10
D
（0.033±0.004）
1.25±0.10
（0.049±0.004）
1.25±0.10
G
（0.049±0.004）
1.15±0.10
F
（0.045±0.004）
1.6±0.15
（0.063±0.006）
1.6±0.20
L
（0.063±0.008）
❾
105
SD
16V
107
SD
10V
6.3V
50V
25V
212
SD
16V
10V
50V
35V
316
SD
16V
10V
35V
25V
V
V
V
V
V
V
V
V
V
V
V
P
P
V
V
V
A
A
A
A
A
A
A
A
A
D
D
D
D
D
D
A
A
A
A
A
A
A
A
D
D
G
G
G
D
F
F
D
G
G
G
※Letters in the table indicate thickness.
F
F
F
L
L
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
20
1
mlcc05_e-01
■ PART NUMBERS
●105TYPE（0402 case size）
Rated Voltage
50V
25V
16V
Ordering code
Capacitance
〔μF〕
0.00039
0.00047
0.00056
0.00068
0.00082
0.0010
0.0012
0.0015
0.0018
0.0022
0.0027
Temperature
characteristics
Thickness
〔mm〕
（inch）
Dissipation factor Soldering method Capacitance
R:Reflow soldering
〔%〕Max.
tolerance
W:Wave soldering
0.5±0.05
（0.020±0.002）
Standard type
0.1
R
±10％*
LMK105 SD152KP
RoHS
0.0015
0.3±0.03
（0.012±0.001）
10V
LMK105 SD332K V
LMK105 SD392K V
LMK105 SD472K V
RoHS
RoHS
RoHS
0.0033
0.0039
0.0047
0.5±0.05
（0.020±0.002）
6.3V
JMK105 SD272KP
RoHS
0.0027
0.3±0.03
（0.012±0.001）
*：Capacitance tolerance J（±5％）is also available. Please contact Taiyo Yuden sales channels.
CAPACITORS
UMK105 SD391K V
UMK105 SD471K V
UMK105 SD561K V
TMK105 SD681K V
TMK105 SD821K V
TMK105 SD102K V
TMK105 SD122K V
EMK105 SD152K V
EMK105 SD182K V
EMK105 SD222K V
EMK105 SD272K V
EHS
（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
●107TYPE（0603 case size）
EHS
（Environmental Capacitance
Temperature
〔μF〕
characteristics
Hazardous
Substances）
UMK107 SD102KA
RoHS
0.0010
UMK107 SD122KA
RoHS
0.0012
UMK107 SD152KA
RoHS
0.0015
50V
UMK107 SD182KA
RoHS
0.0018
UMK107 SD222KA
RoHS
0.0022
UMK107 SD272KA
RoHS
0.0027
UMK107 SD332KA
RoHS
0.0033
TMK107 SD392KA
RoHS
0.0039
25V
Standard type
TMK107 SD472KA
RoHS
0.0047
EMK107 SD562KA
RoHS
0.0056
EMK107 SD682KA
RoHS
0.0068
16V
EMK107 SD822KA
RoHS
0.0082
EMK107 SD103KA
RoHS
0.010
LMK107 SD123KA
RoHS
0.012
LMK107 SD153KA
RoHS
0.015
10V
LMK107 SD183KA
RoHS
0.018
LMK107 SD223KA
RoHS
0.022
*：Capacitance tolerance J（±5％）is also available. Please contact Taiyo Yuden sales channels.
Rated Voltage
Ordering code
Thickness
〔mm〕
（inch）
Dissipation factor Soldering method Capacitance
R:Reflow soldering
〔%〕Max.
tolerance
W:Wave soldering
0.1
R
±10％*
0.8±0.1
（0.031±0.004）
●212TYPE（0805 case size）
EHS
（Environmental Capacitance
Temperature
〔μF〕
characteristics
Hazardous
Substances）
UMK212 SD392KD
RoHS
0.0039
UMK212 SD472KD
RoHS
0.0047
UMK212 SD562KD
RoHS
0.0056
50V
UMK212 SD682KD
RoHS
0.0068
UMK212 SD822KD
RoHS
0.0082
UMK212 SD103KD
RoHS
0.01
GMK212 SD123KD
RoHS
0.012
GMK212 SD153KD
RoHS
0.015
Standard type
35V
GMK212 SD183KG
RoHS
0.018
GMK212 SD223KG
RoHS
0.022
GMK212 SD273KG
RoHS
0.027
16V
EMK212 SD333KD
RoHS
0.033
LMK212 SD473KD
RoHS
0.047
LMK212 SD683KG
RoHS
0.068
10V
LMK212 SD823KG
RoHS
0.082
LMK212 SD104KG
RoHS
0.1
*：Capacitance tolerance J（±5％）is also available. Please contact Taiyo Yuden sales channels.
Rated Voltage
Ordering code
Thickness
〔mm〕
（inch）
Dissipation factor Soldering method Capacitance
R:Reflow soldering
〔%〕Max.
tolerance
W:Wave soldering
0.85±0.1
（0.033±0.004）
0.1
R
±10％*
1.25±0.1
（0.049±0.004）
0.85±0.1
（0.033±0.004）
1.25±0.1
（0.049±0.004）
●316TYPE（1206 case size）
EHS
Thickness
（Environmental Capacitance Temperature Dissipation factor Soldering method Capacitance
R:Reflow soldering
〔mm〕
〔μF〕
Hazardous
tolerance
characteristics
〔%〕Max.
W:Wave soldering
（inch）
Substances）
GMK316 SD333KF
RoHS
0.033
35V
GMK316 SD393KF
RoHS
0.039
1.15±0.1
TMK316 SD473KF
RoHS
0.047
（0.045±0.004）
type
0.1
R
±10％*
Standard
TMK316 SD563KF
RoHS
0.056
25V
TMK316 SD683KF
RoHS
0.068
TMK316 SD823KL
RoHS
0.082
1.6±0.2
（0.063±0.008）
TMK316 SD104KL
RoHS
0.1
*：Capacitance tolerance J（±5％）is also available. Please contact Taiyo Yuden sales channels.
Rated Voltage
Ordering code
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc05_e-01
1
21
■ ELECTRICAL CHARACTERISTICS
■ Capacitance-temperature characteristics
20
15
SD : Standard Type
10
5
0
-5
-10
-15
-20
-60
-40 -20
0
20
40
60
80
100
120
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
22
1
mlcc05_e-01
■ RELIABILITY DATA
Multilayer Ceramic Capacitors and Medium-High Voltage Multilayer Ceramic
Capacitors are noted separately.
Super Low Distortion Multilayer Ceramic Capacitors（CFCAP）
1. Operating Temperature Range
Specified Value
−55 to ＋125℃
2. Storage Temperature Range
Specified Value
−55 to ＋125℃
3. Rated Voltage
Specified Value
6.3VDC, 10VDC, 16VDC, 25VDC, 35VDC, 50VDC
（Between terminals）
4. Withstanding Voltage
Specified Value
【Test Methods and Remarks】
Applied voltage: Rated voltage×3
Duration: 1 to 5 sec.
Charge/discharge current: 50mA max.
５．Insulation Resistance
Specified Value
【Test Methods and Remarks】
Applied voltage: Rated voltage
Duration: 60±5 sec.
Charge/discharge current: 50mA max.
6．Capacitance（Tolerance）
Specified Value
【Test Methods and Remarks】
Measuring frequency：1ｋHz±10%
Measuring voltage：1±0.2Vrms
Bias application: None
７．Dissipation Factor
Specified Value
【Test Methods and Remarks】
Measuring frequency：1ｋHz±10%
Measuring voltage：1±0.2Vrms
Bias application: None
No breakdown or damage
10000 MΩ or 500MΩμF, whichever is smaller
±10％
0.1%max
8．Deflection
Appearance: No abnormality
Capacitance change: ±5%
Specified Value
【Test Methods and Remarks】
Warp: 1mm
Speed: 0.5mm/second
Duration:10 seconds
Test board: glass epoxy resin substrate
Thickness: 1.6mm
Capacitance measurement shall be conducted with the board bent.
R-230
9．Adhesive Strength of Terminal Electrodes
Specified Value
【Test Methods and Remarks】
Applied force: 5N
Duration: 30 ±5 seconds
10．Solderability
Specified Value
【Test Methods and Remarks】
Eutectic solder
Lead-free solder
Solder type
H60A or H63A
Snー3.0Agー0.5Cu
No terminal separation or its indication.
At least 95% of terminal electrode is covered by new solder.
Solder temperature
230±5℃
245±3℃
Duration
4±1 sec.
11．Resistance to Soldering
Specified Value
Appearance: No abnormality
Capacitance change: ±2.5% max.
Dissipation factor : Initial value
Insulation resistance: Initial value
Withstanding voltage（between terminals）
: No abnormality
【Test Methods and Remarks】
Solder temp.: 270 ±5℃
Duration: 3 ±0.5 sec.
Preheating conditions：80 to 100℃, 2 to 5 min. or 5 to 10 min.
150 to 200℃, 2 to 5 min. or 5 to 10 min.
Recovery : 24±2hrs under the standard condition
Note1
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc05_reli-R1
1
mlcc05_reli_e-01
■ RELIABILITY DATA
12．Temperature Cycle
（Thermal Shock）
Appearance: No abnormality
Capacitance change: ±2.5% max
Dissipation factor : Initial value
Insulation resistance: Initial value
Withstanding voltage（between terminals）
: No abnormality
Specified Value
【Test Methods and Remarks】
Conditions for 1 cycle／ Step 1: Minimum operating temperature
Step 2: Room temperature
Step 3: Maximum operating temperature
Step 4: Room temperature
Number of cycles: 5 times
Recovery : 24±2hrs under the standard condition
Note1
＋0
−3℃
＋0
−3℃
30±3 min.
2 to 3 min.
30±3 min.
2 to 3 min.
13．Humidity（Steady state）
Appearance: No abnormality
Capacitance change: ±5% max
Dissipation factor : 0.5% max
Insulation resistance 50MΩμF or 1000MΩ, whichever is smaller
Specified Value
【Test Methods and Remarks】
Temperature:40±2℃
Humidity:90 to 95% RH
＋24
Duration:500 −0 hrs
Recovery: 24 ±2hrs under the standard condition
Note1
14．Humidy Loading
Appearance: No abnormality
Capacitance change: ±7.5% max
Dissipation factor : 0.5% max
Insulation resistance: 25MΩμF or 500MΩ, whichever is smaller
Specified Value
【Test Methods and Remarks】
According to JIS C 5102 clause 9.9.
Temperature:40±2℃ Humidity:90 to 95% RH
＋24
Duration:500 −0 hrs
Applied voltage: Rated voltage
Charge/discharge current:50mA max
Recovery: 24 ±2hrs under the standard condition
Note1
15．High Temperature Loading
Appearance: No abnormality
Capacitance change: ±3% max
Dissipation factor : 0.35% max
Insulation resistance: 50MΩμF or 1000MΩ, whichever is smaller
Specified Value
【Test Methods and Remarks】
According to JIS C 5102 clause 9.10.
Temperature:125±3℃
＋48
Duration:1000 −0 hrs
Applied voltage: Rated voltage x 2
Charge/discharge current:50mA max
Recovery: 24 ±2hrs under the standard condition
Note1
Note1
Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa
When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted under the following condition.
Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa
Unless otherwise specified, all the tests are conducted under the "standard condition".
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc05_reli_e-01
1
mlcc05_reli-R2
MEDIUM-HIGH VOLTAGE MULTILAYER CERAMIC CAPACITORS
REFLOW
■ FEATURES
■ APPLICATIONS
◦ The use of nickel as electrode material prevents migration and provides high reliability.
◦ General telephone exchange
◦ Inverter
◦ Small case sizes with high rated voltage.
◦ Wireless and Telecommunication base
◦ For DC/DC Converter
■ ORDERING CODE
H M K
❶
❷
❶Rated
voltage〔VDC〕
H
100
Q
250
S
630
3
1
❸
6
B
J
❹
❸End
termination
K
Plated
❷Series name
Multilayer ceramic
M
capacitor
1
0
❺
❹Dimensions (EIA)
L×W
〔mm〕
107
（0603） 1.6×0.8
（0805） 2.0×1.25
212
316
（1206） 3.2×1.6
（1210） 3.2×2.5
325
（1812） 4.5×3.2
432
4
❻
❺Temperature
characteristics
code
B
BJ
X5R
B7
X7R
C7
X7S
K
L － T △
❼
❽
❻Nominal capacitance
〔pF〕
example
104
100,000
105
1,000,000
❿
⓫
⓫Internal code
Standard
△
Product
△＝Blank space
❾Special code
Standard
－
Product
❽Thickness
〔mm〕
A
0.8
D
0.85
G
1.25
F
1.15
L
1.6
N
1.9
M
2.5
❼Capacitance
tolerance
K
±10%
M
±20%
❾
❿Packaging
φ178mm Taping
（4mm pitch）
T
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
Type（EIA）
L
W
□MK107
（0603）
1.6±0.10
（0.063±0.004）
0.8±0.10
（0.031±0.004）
□MK212
（0805）
2.0±0.10
（0.079±0.004）
1.25±0.10
（0.049±0.004）
□MK316
（1206）
3.2±0.15
（0.126±0.006）
1.6±0.15
（0.063±0.006）
T
□MK325
（1210）
3.2±0.3
（0.126±0.012）
2.5±0.20
（0.098±0.008）
□MK432
（1812）
4.5±0.4
（0.177±0.016）
3.2±0.30
（0.126±0.012）
Standard quantity [pcs]
Embossed tape
Paper tape
e
0.8±0.10
（0.031±0.004）
0.85±0.10
（0.033±0.004）
1.25±0.10
（0.049±0.004）
1.15±0.10
（0.045±0.004）
1.6±0.20
（0.063±0.008）
1.15±0.10
（0.045±0.004）
1.9±0.20
（0.075±0.008）
2.5±0.20
（0.098±0.008）
0.35±0.25
（0.014±0.010）
A
D
0.5±0.25
（0.020±0.010）
G
F
＋0.35
N
M
－
4000
－
－
3000
0.5ー0.25
（0.020＋0.014
－0.010 ）
－
0.6±0.3
（0.024±0.012）
－
0.9±0.6
（0.035±0.024）
－
L
F
4000
3000
2000
2000
500
Unit：mm
（inch）
■ AVAILABLE CAPACITANCE RANGE
Type
107
212
Temp.
X7R X7S B/X5R
X7R
B/X5R
Char
VDC
100V 100V 100V 100V 250V 100V 250V
[pF:3digits]
0.001
102
A
A
D
D
0.0015
152
A
A
D
D
0.0022
222
A
A
D
D
0.0033
332
A
A
D
D
0.0047
472
A
A
G
G
0.0068
682
A
A
G
G
0.01
103
A
A
G
G
G
G
0.015
153
A
A
G
G
G
G
0.022
223
A
A
G
G
G
G
0.033
333
A
A
G
G
0.047
473
G
G
0.068
683
G
G
0.1
104
A
A
G
G
0.15
154
0.22
224
G
G
0.33
334
0.47
474
0.68
684
1.0
105
1.5
155
2.2
225
※Letters in the table indicate thickness.
Cap
[μF]
316
325
X7R
100V
250V
B/X5R
630V
100V
250V
F
F
F
F
F
F
F
L
L
L
L
L
L
L
L
L
L
L
L
L
L
630V
100V
L
L
L
L
L
L
L
L
F
N
N
N
N
N
N
N
B/X5R
250V
630V
N
N
N
N
F
F
F
F
F
F
F
L
L
L
L
L
L
432
X7R
N
N
N
100V
F
N
N
N
N
N
N
N
X7R
250V
630V
N
N
N
N
100V
N
N
N
M
B/X5R
250V
630V
M
M
M
M
100V
M
M
M
M
M
M
M
250V
630V
M
M
M
M
M
M
M
M
M
M
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
24
1
mlcc06_e-01
■ AVAILABLE CAPACITANCE RANGE
Temp.char.Code
Applicable standard
JIS
EIA
EIA
EIA
BJ
B7
C7
B
X5R
X7R
X7S
Temperature characteristics
Temperature range
〔℃〕
－25～＋85
－55～＋85
－55～＋125
－55～＋125
Ref. Temp.
〔℃〕
20
25
25
25
Capacitance change
〔％〕
±10
±15
±15
±22
Capacitance tolerance
〔％〕
±10（K）
±20（M）
■ PART NUMBERS
●107TYPE
（0603 case size）
【Temp.char. BJ:B/X5R】
Ordering code
EHS
（Environmental Capacitance Temperature
〔μF〕
Hazardous
characteristics
Substances）
RoHS
0.001
RoHS
0.0015
RoHS
0.0022
RoHS
0.0033
RoHS
0.0047
B/X5R*2
RoHS
0.0068
RoHS
0.01
RoHS
0.015
RoHS
0.022
RoHS
0.033
RoHS
0.1
Dissipation factor
〔%〕Max.
Soldering method
R:Reflow soldering
W:Wave soldering
Capacitance
tolerance
Thickness
〔mm〕
（inch）
3.5
R
±10%
±20%
0.8±0.1
（0.031±0.0041）
Dissipation factor
〔%〕Max.
Soldering method
R:Reflow soldering
W:Wave soldering
Capacitance
tolerance
Thickness
〔mm〕
（inch）
3.5
R
±10%
±20%
0.8±0.1
（0.031±0.0041）
Dissipation factor
〔%〕Max.
Soldering method
R:Reflow soldering
W:Wave soldering
Capacitance
tolerance
Thickness
〔mm〕
（inch）
HMK107 BJ102□A
HMK107 BJ152□A
HMK107 BJ222□A
HMK107 BJ332□A
HMK107 BJ472□A
100V
HMK107 BJ682□A
HMK107 BJ103□A
HMK107 BJ153□A
HMK107 BJ223□A
HMK107 BJ333□A
HMK107 BJ104□A
□ Please specify the capacitance tolerance code.
may
provide
X7R/X7S for some items according to the individual specification.
*2：We
CAPACITORS
Rated
Voltage
【Temp.char. B7:X7R C7:X7S】
Rated
Voltage
Ordering code
HMK107 B7 102□A
HMK107 B7 152□A
HMK107 B7 222□A
HMK107 B7 332□A
HMK107 B7 472□A
100V
HMK107 B7 682□A
HMK107 B7 103□A
HMK107 B7 153□A
HMK107 B7 223□A
HMK107 B7 333□A
HMK107 C7 104□A
□ Please specify the capacitance tolerance code.
EHS
（Environmental Capacitance Temperature
〔μF〕
Hazardous
characteristics
Substances）
RoHS
0.001
RoHS
0.0015
RoHS
0.0022
RoHS
0.0033
RoHS
0.0047
X7R
RoHS
0.0068
RoHS
0.01
RoHS
0.015
RoHS
0.022
RoHS
0.033
RoHS
0.1
X7S
●212TYPE
（0805 case size）
【Temp.char. BJ:B/X5R】
Rated
Voltage
Ordering code
EHS
（Environmental Capacitance Temperature
〔μF〕
Hazardous
characteristics
Substances）
RoHS
0.01
RoHS
0.015
RoHS
0.022
RoHS
0.033
RoHS
0.047
RoHS
0.068
RoHS
0.1
RoHS
0.22
RoHS
0.001
B/X5R*2
RoHS
0.0015
RoHS
0.0022
RoHS
0.0033
RoHS
0.0047
RoHS
0.0068
RoHS
0.01
RoHS
0.015
RoHS
0.022
HMK212 BJ103□G
HMK212 BJ153□G
HMK212 BJ223□G
HMK212 BJ333□G
100V
HMK212 BJ473□G
HMK212 BJ683□G
HMK212 BJ104□G
HMK212 BJ224□G
QMK212 BJ102□D
QMK212 BJ152□D
QMK212 BJ222□D
QMK212 BJ332□D
QMK212 BJ472□G
250V
QMK212 BJ682□G
QMK212 BJ103□G
QMK212 BJ153□G
QMK212 BJ223□G
□ Please specify the capacitance tolerance code.
*2：We may provide X7R for some items according to the individual specification.
1.25±0.1
（0.049±0.004）
3.5
R
±10%
±20%
0.85±0.1
（0.033±0.004）
2.5
1.25±0.1
（0.049±0.004）
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc06_e-01
1
25
■ PART NUMBERS
【Temp.char. B7:X7R】
Rated
Voltage
Ordering code
HMK212 B7 103□G
HMK212 B7 153□G
HMK212 B7 223□G
HMK212 B7 333□G
100V
HMK212 B7 473□G
HMK212 B7 683□G
HMK212 B7 104□G
HMK212 B7 224□G
QMK212 B7 102□D
QMK212 B7 152□D
QMK212 B7 222□D
QMK212 B7 332□D
QMK212 B7 472□G
250V
QMK212 B7 682□G
QMK212 B7 103□G
QMK212 B7 153□G
QMK212 B7 223□G
□ Please specify the capacitance tolerance code.
EHS
（Environmental Capacitance Temperature
〔μF〕
Hazardous
characteristics
Substances）
RoHS
0.01
RoHS
0.015
RoHS
0.022
RoHS
0.033
RoHS
0.047
RoHS
0.068
RoHS
0.1
RoHS
0.22
RoHS
0.001
X7R
RoHS
0.0015
RoHS
0.0022
RoHS
0.0033
RoHS
0.0047
RoHS
0.0068
RoHS
0.01
RoHS
0.015
RoHS
0.022
Dissipation factor
〔%〕Max.
Soldering method
R:Reflow soldering
W:Wave soldering
Thickness
〔mm〕
（inch）
Capacitance
tolerance
1.25±0.1
（0.049±0.004）
3.5
R
±10%
±20%
0.85±0.1
（0.033±0.004）
2.5
1.25±0.1
（0.049±0.004）
●316TYPE
（1206 case size）
【Temp.char. BJ:B/X5R】
Rated
Voltage
100V
Ordering code
HMK316 BJ473□L
HMK316 BJ683□L
HMK316 BJ104□L
HMK316 BJ154□L
HMK316 BJ224□L
HMK316 BJ334□L
EHS
（Environmental Capacitance Temperature
〔μF〕
Hazardous
characteristics
Substances）
RoHS
0.047
RoHS
0.068
RoHS
0.1
RoHS
0.15
RoHS
0.22
RoHS
Dissipation factor
〔%〕Max.
Soldering method
R:Reflow soldering
W:Wave soldering
3.5
0.33
HMK316 BJ474□L
RoHS
0.47
HMK316 BJ105□L
RoHS
1
QMK316 BJ333□L
RoHS
0.033
QMK316 BJ473□L
RoHS
0.047
250V
QMK316 BJ683□L
RoHS
0.068
QMK316 BJ104□L
RoHS
0.1
SMK316 BJ102□F
RoHS
0.001
SMK316 BJ152□F
RoHS
0.0015
SMK316 BJ222□F
RoHS
0.0022
SMK316 BJ332□F
RoHS
0.0033
SMK316 BJ472□F
RoHS
0.0047
630V
SMK316 BJ682□F
RoHS
0.0068
SMK316 BJ103□F
RoHS
0.01
SMK316 BJ153□L
RoHS
0.015
SMK316 BJ223□L
RoHS
0.022
□ Please specify the capacitance tolerance code.
*2：We may provide X7R for some items according to the individual specification.
Thickness
〔mm〕
（inch）
Capacitance
tolerance
1.6±0.2
（0.063±0.008）
B/X5R*2
R
±10%
±20%
2.5
1.15±0.1
（0.045±0.004）
1.6±0.2
（0.063±0.008）
【Temp.char. B7:X7R】
Rated
Voltage
Ordering code
HMK316 B7 473□L
HMK316 B7 683□L
HMK316 B7 104□L
HMK316 B7 154□L
100V
HMK316 B7 224□L
HMK316 B7 334□L
HMK316 B7 474□L
HMK316 B7 105□L
QMK316 B7 333□L
QMK316 B7 473□L
250V
QMK316 B7 683□L
QMK316 B7 104□L
SMK316 B7 102□F
SMK316 B7 152□F
SMK316 B7 222□F
SMK316 B7 332□F
630V
SMK316 B7 472□F
SMK316 B7 682□F
SMK316 B7 103□F
SMK316 B7 153□L
SMK316 B7 223□L
□ Please specify the capacitance tolerance code.
EHS
（Environmental Capacitance Temperature
〔μF〕
Hazardous
characteristics
Substances）
RoHS
0.047
RoHS
0.068
RoHS
0.1
RoHS
0.15
RoHS
0.22
RoHS
0.33
RoHS
0.47
RoHS
1
RoHS
0.033
RoHS
0.047
RoHS
0.068
X7R
RoHS
0.1
RoHS
0.001
RoHS
0.0015
RoHS
0.0022
RoHS
0.0033
RoHS
0.0047
RoHS
0.0068
RoHS
0.01
RoHS
0.015
RoHS
0.022
Dissipation factor
〔%〕Max.
Soldering method
R:Reflow soldering
W:Wave soldering
Thickness
〔mm〕
（inch）
Capacitance
tolerance
3.5
1.6±0.2
（0.063±0.008）
R
2.5
±10%
±20%
1.15±0.1
（0.045±0.004）
1.6±0.2
（0.063±0.008）
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
26
1
mlcc06_e-01
■ PART NUMBERS
●325TYPE
（1210 case size）
【Temp.char. BJ:B/X5R】
Rated
Voltage
Ordering code
HMK325 BJ104□F
EHS
（Environmental Capacitance Temperature
〔μF〕
Hazardous
characteristics
Substances）
RoHS
Dissipation factor
〔%〕Max.
Soldering method
R:Reflow soldering
W:Wave soldering
Thickness
〔mm〕
（inch）
Capacitance
tolerance
1.15±0.1
0.1
3.5
B/X5R*2
R
±10%
±20%
1.9±0.2
（0.075±0.008）
2.5
CAPACITORS
HMK325 BJ154□N
RoHS
0.15
HMK325 BJ224□N
RoHS
0.22
HMK325 BJ334□N
RoHS
0.33
100V
HMK325 BJ474□N
RoHS
0.47
HMK325 BJ684□N
RoHS
0.68
HMK325 BJ105□N
RoHS
1
HMK325 BJ225□N
RoHS
2.2
QMK325 BJ473□N
RoHS
0.047
QMK325 BJ104□N
RoHS
0.1
250V
QMK325 BJ154□N
RoHS
0.15
QMK325 BJ224□N
RoHS
0.22
SMK325 BJ223□N
RoHS
0.022
630V
SMK325 BJ333□N
RoHS
0.033
SMK325 BJ473□N
RoHS
0.047
□ Please specify the capacitance tolerance code.
*2：We may provide X7R for some items according to the individual specification.
（0.045±0.004）
【Temp.char. B7:X7R】
Rated
Voltage
Ordering code
HMK325 B7 104□F
HMK325 B7 154□N
HMK325 B7 224□N
HMK325 B7 334□N
100V
HMK325 B7 474□N
HMK325 B7 684□N
HMK325 B7 105□N
HMK325 B7 225□N
QMK325 B7 473□N
QMK325 B7 104□N
250V
QMK325 B7 154□N
QMK325 B7 224□N
SMK325 B7 223□N
630V
SMK325 B7 333□N
SMK325 B7 473□N
□ Please specify the capacitance tolerance code.
EHS
（Environmental Capacitance Temperature
〔μF〕
Hazardous
characteristics
Substances）
RoHS
0.1
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.15
0.22
0.33
0.47
0.68
1
2.2
0.047
0.1
0.15
0.22
0.022
0.033
0.047
Dissipation factor
〔%〕Max.
Soldering method
R:Reflow soldering
W:Wave soldering
Thickness
〔mm〕
（inch）
Capacitance
tolerance
1.15±0.1
（0.045±0.004）
3.5
X7R
R
±10%
±20%
1.9±0.2
（0.075±0.008）
2.5
●432TYPE
（1812 case size）
【Temp.char. BJ:B/X5R】
Rated
Voltage
Ordering code
EHS
（Environmental Capacitance Temperature
〔μF〕
Hazardous
characteristics
Substances）
RoHS
0.47
RoHS
1
RoHS
1.5
RoHS
2.2
RoHS
0.1
B/X5R*2
RoHS
0.22
RoHS
0.33
RoHS
0.47
RoHS
0.047
RoHS
0.068
RoHS
0.1
tanδ
Dissipation factor
〔%〕Max.
HMK432 BJ474□M
HMK432 BJ105□M
HMK432 BJ155□M
HMK432 BJ225□M
QMK432 BJ104□M
QMK432 BJ224□M
250V
QMK432 BJ334□M
QMK432 BJ474□M
SMK432 BJ473□M
630V
SMK432 BJ683□M
SMK432 BJ104□M
□ Please specify the capacitance tolerance code.
*2：We may provide X7R for some items according to the individual specification.
100V
Soldering method
R:Reflow soldering
W:Wave soldering
Capacitance
tolerance
Thickness
〔mm〕
（inch）
R
±10%
±20%
2.5±0.2
（0.098±0.008）
Soldering method
R:Reflow soldering
W:Wave soldering
Capacitance
tolerance
Thickness
〔mm〕
（inch）
R
±10%
±20%
2.5±0.2
（0.098±0.008）
3.5
2.5
【Temp.char. B7:X7R】
Rated
Voltage
Ordering code
HMK432 B7 474□M
HMK432 B7 105□M
HMK432 B7 155□M
HMK432 B7 225□M
QMK432 B7 104□M
QMK432 B7 224□M
250V
QMK432 B7 334□M
QMK432 B7 474□M
SMK432 B7 473□M
630V
SMK432 B7 683□M
SMK432 B7 104□M
□ Please specify the capacitance tolerance code.
100V
EHS
（Environmental Capacitance Temperature
〔μF〕
Hazardous
characteristics
Substances）
RoHS
0.47
RoHS
1
RoHS
1.5
RoHS
2.2
RoHS
0.1
RoHS
0.22
X7R
RoHS
0.33
RoHS
0.47
RoHS
0.047
RoHS
0.068
RoHS
0.1
Dissipation factor
〔%〕Max.
3.5
2.5
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc06_e-01
1
27
■ ELECTRICAL CHARACTERISTICS
●Example of Impedance ESR vs. Frequency characteristics
■ Taiyo Yuden medium-high voltage ceramic capacitor
HMK212BJ104KG/HMK212B7104KG
SMK316BJ223KL/SMK316B7223KL
SMK432BJ104KM/SMK432B7104KM
QMK432BJ474KM/QMK432B7474KM
QMK325BJ224KN/QMK325B7224KN
HMK325BJ105KN/HMK325B7105KN
●Temperature characteristics
HMK325BJ105KN/HMK325B7105KN
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
28
1
mlcc06_e-01
■ RELIABILITY DATA
Multilayer Ceramic Capacitors and Super Low Distortion Multilayer Ceramic
Capacitors are noted separately.
MediumーHigh Voltage Multilayer Ceramic Capacitor
1. Operating Temperature Range
Specified Value
X7R, X7S：−55∼＋125℃ X5R：−55∼＋85℃ B：−25∼＋85℃
2. Storage Temperature Range
Specified Value
X7R, X7S：−55∼＋125℃ X5R：−55∼＋85℃ B：−25∼＋85℃
3. Rated Voltage
Specified Value
100VDC, 250VDC, 630VDC
（Between terminals）
4. Withstanding Voltage
Specified Value
No breakdown or damage
【Test Methods and Remarks】
Applied voltage:Rated voltage×2.5
（HMK）
, Rated voltage×2
（QMK）
, Rated voltage×1.2
（SMK）
Duration：1 to 5sec.
Charge/discharge current：50mA max.
５．Insulation Resistance
Specified Value
【Test Methods and Remarks】
Applied voltage:Rated voltage
（HMK, QMK）
, 500V
（SMK）
Duration：60±5sec.
Charge/discharge current：50mA max.
6．Capacitance
（Tolerance）
Specified Value
【Test Methods and Remarks】
Measuring frequency:1kHz±10%
Measuring voltage:1±0.2Vrms
Bias application:None
100MΩμF or 10GΩ, whichever is smaller.
±10％、±20％
７．Dissipation Factor
3.5%max
（HMK）
2.5%max
（QMK, SMK）
Specified Value
【Test Methods and Remarks】
Measuring frequency:1kHz±10%
Measuring voltage:1±0.2Vrms
Bias application:None
8．Temperature Characteristic of Capacitance
B： ±10％（−25∼＋85℃）
X5R：±15％（−55∼＋85℃）
X7R：±15％（−55∼＋125℃）
X7S：±22％（−55∼＋125℃）
Specified Value
【Test Methods and Remarks】
Capacitance value at each step shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the following equation.
Step
1
2
3
（C−C2）
×100
（％）
C2
B
X5R、X7R、X7S
Minimum operating temperature
20℃
25℃
Maximum operating temperature
C ：Capacitance value in Step 1 or Step 3
C2 ：Capacitance value in Step 2
9．Deflection
Appearance:No abnormality
Capacitance change:Within±10%
Specified Value
【Test Methods and Remarks】
Warp:1mm
Duration:10sec.
Test board:glass epoxy-resin substrate
Thickness:1.6mm
Capacitance measurement shall be conducted with the board bent.
10．Adhesive Strength of Terminal Electrodes
Specified Value
【Test Methods and Remarks】
Applied force:5N
Duration:30±5sec.
R-230
No terminal separation or its indication.
11．Solderability
Specified Value
【Test Methods and Remarks】
Eutectic solder
Lead-free solder
Solder type
H60A or H63A
Snー3.0Agー0.5Cu
At least 95% of terminal electrode is covered by new solder
Solder temperature
230±5℃
245±3℃
Duration
4±1 sec.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc06_reli-R1
1
mlcc06_reli_e-01
■ RELIABILITY DATA
12．Resistance to Soldering
Appearance:
No abnormality
Capacitance change:
Within±15%
（HMK）
, ±10%
（QMK, SMK）
Dissipation factor :
Initial value
Insulation resistance:
Initial value
Withstanding voltage
（between terminals）
: No abnormality
Specified Value
【Test Methods and Remarks】
Preconditioning:Thermal treatment
（at 150℃ for 1hr） Note1
Solder temperature:270±5℃
Duration:3±0.5sec.
Preheating conditions: 80 to 100℃, 2 to 5 min.
150 to 200℃, 2 to 5min.
Recovery : 24±2hrs under the standard condition Note3
（Thermal Shock）
13．Temperature Cycle
Appearance:
Capacitance change:
Dissipation factor:
Insulation resistance:
Specified Value
【Test Methods and Remarks】
Preconditioning:Thermal treatment
（at 150℃ for 1hr） Note1
Conditions for 1 cycle／ Step 1: Minimum operating temperature
Step 2: Room temperature
Step 3: Maximum operating temperature
Step 4: Room temperature
Number of cycles:5 times
Recovery : 24±2hrs under the standard condition Note3
＋0
−3℃
＋0
−3℃
No abnormality
Within±15%
（HMK）
, ±7.5%
（QMK, SMK）
Initial value
Initial value
30±3min.
2 to 3min.
30±3min.
2 to 3min.
14．Humidity
（Steady state）
Specified Value
Appearance:
Capacitance change:
Dissipation factor :
Insulation resistance:
No abnormality
Within±15%
7%max
（HMK）
, 5%max
（QMK, SMK）
.
25MΩμF or 1000MΩ, whichever is smaller.
Appearance:
Capacitance change:
Dissipation factor:
Insulation resistance:
No abnormality
Within±15%
7%max
（HMK）
, 5%max
（QMK, SMK）
.
10MΩμF or 500MΩ, whichever is smaller.
Appearance:
Capacitance change:
Dissipation factor:
Insulation resistance:
No abnormality
Within±15%
7%max
（HMK）
, 5%max
（QMK, SMK）
.
50MΩμF or 1000MΩ, whichever is smaller.
【Test Methods and Remarks】
Preconditioning:Thermal treatment
（at 150℃ for 1hr） Note1
Temperature:40±2℃
Humidity：90 to 95%RH
＋24
Duration: 500 −0 hrs
Recovery : 24±2hrs under the standard condition Note3
15．Humidity Loading
Specified Value
【Test Methods and Remarks】
According to JIS 5102 clause 9.9.
Preconditioning:Voltage treatment Note2
Temperature:40±2℃
Humidity：90 to 95%RH
Applied voltage:Rated voltage
Charge/discharge current：50mA max.
＋24
Duration: 500 −0 hrs
Recovery : 24±2hrs under the standard condition
Note3
16．High Temperature Loading
Specified Value
【Test Methods and Remarks】
According to JIS 5102 clause 9.10.
Preconditioning:Voltage treatment Note2
Temperature:125±3℃（B7）
, 85±2℃
（BJ）
Applied voltage:Rated voltage×2
（HMK）
Rated voltage×1.5
（QMK）
Rated voltage×1.2
（SMK）
Charge/discharge current：50mA max.
＋24
Duration: 1000 −0 hrs
Recovery : 24±2hrs under the standard condition Note3
Note1 Thermal treatment : Initial value shall be measured after test sample is heat-treated at 150＋0/−10℃ for an hour and kept at room temperature for 24±2hours.
Note2 Voltage treatment : Initial value shall be measured after test sample is voltage-treated for an hour at both the temperature and voltage specified in the test conditions, and
kept at room temperature for 24±2hours.
Note3 Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa
When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted under the following condition.
Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa
Unless otherwise specified, all the tests are conducted under the "standard condition".
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc06_reli_e-01
1
mlcc06_reli-R2
LW REVERSAL DECOUPLING CAPACITORS（LWDCTM）
REFLOW
■ FEATURES
■ APPLICATIONS
◦ Low equivalent series resistance（ESR）.
◦ Decoupling capacitors
◦ Low equivalent series inductor（ESL）.
◦ Filtering capacitors
◦ The effect of noise removal in the high frequency.
◦ Decreased ripple voltage.
◦ Small size with high capacitance.
■ ORDERING CODE
J
W K
❶
❷
❶Rated
voltage〔VDC〕
A
4
J
6.3
L
10
E
16
T
25
2
❸
1
2
B
❹
1
0
❺
❹Dimensions (EIA)
L×W
〔mm〕
105
（0204） 0.52×1.0
107
（0306） 0.8×1.6
（0508） 1.25×2.0
212
❸End
termination
K
Plated
J
❻
❼
❼Capacitance
tolerance
K
±10%
M
±20%
❺Temperature
characteristics
code
B
BJ
X5R
B7
X7R
C6
X6S
C7
X7S
❷Series name
W LW Reverse Type
M D － T △
6
❻Nominal capacitance
〔μF〕
example
105
1.0
106
10.0
❽
❾
❿
⓫Internal code
Standard
△
Product
△＝Blank space
❾Special code
Standard
－
Product
❽Thickness
〔mm〕
P
0.3
V
0.5
A
0.8
D
0.85
⓫
❿Packaging
φ178mm Taping
F （2mm pitch）
0204 Type
φ178mm Taping
T （4mm pitch）
0306, 0508 Type
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
Type（EIA）
L
□WK105
（0204）
0.52±0.05
（0.020±0.002）
□WK107
（0306）
□WK212
（0508）
0.80±0.10
（0.031±0.004）
1.25±0.15
（0.049±0.006）
W
Standard quantity [pcs]
Embossed tape
Paper tape
T
0.30±0.05
（0.012±0.002）
1.00±0.05
（0.039±0.002）
0.50±0.05
（0.020±0.002）
1.60±0.10
0.50±0.05
（0.063±0.004） （0.020±0.002）
2.00±0.15
0.85±0.10
（0.079±0.006） （0.033±0.004）
P
10000
－
V
－
4000
D
4000
－
V
Unit：mm
（inch）
■ AVAILABLE CAPACITANCE RANGE
Type
105
Temp.Char
X7S
X6S
X5R
VDC
6.3
4
6.3
[pF:3digits]
0.10
104
P
P
0.22
224
P
0.47
474
P
P
1.0
105
V
V
2.2
225
4.7
475
10.0
106
※Letters in the table indicate thickness.
Cap
[μF]
Temp.char.Code
BJ
B7
C6
C7
X7R
4
16
6.3
4
V
P
212
X5R
25
10
6.3
V
V
V
V
X5R
10
D
D
D
D
V
V
V
V
B
X5R
X7R
X6S
X7S
16
X6S
6.3
V
V
V
V
Applicable standard
JIS
EIA
EIA
EIA
EIA
25
107
X6S
4
X7S
Temperature characteristics
Temperature range
〔℃〕
－25～＋85
－55～＋85
－55～＋125
－55～＋105
－55～＋125
Ref. Temp.
〔℃〕
20
25
25
25
25
Capacitance change
〔％〕
±10
±15
±15
±22
±22
Capacitance tolerance
〔％〕
±10（K）
±20（M）
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
30
1
mlcc07_e-01
■ PART NUMBERS
●105TYPE
（0204 case size）
【Temp.char. BJ:X5R】
Rated
Voltage
Ordering code
JWK105 BJ104MP* 1
JWK105 BJ474MP* 1
6.3V
4V
EHS
Capacitance Temperature Dissipation factor
（Environmental
〔μF〕
characteristics
〔%〕Max.
Hazardous Substances）
RoHS
0.1
5
RoHS
0.47
JWK105 BJ105MV* 1
RoHS
1
AWK105 BJ224MP* 1
RoHS
0.22
*1 1.5 times the rated voltage is applied to the chip during the high temperature loading test.
X5R*2
10
Soldering method
R:Reflow soldering
W:Wave soldering
Capacitance
tolerance
Thickness
〔mm〕
（inch）
0.3±0.05
（0.012±0.002）
R
±20%〔M〕
0.5±0.05
（0.020±0.002）
0.3±0.05
（0.012±0.002）
*2 We may provide X6S/X7S for some items according to the individual specification.
【Temp.char. C6:X6S C7:X7S】
Ordering code
JWK105 C7 104MP* 1
AWK105 C6 224MP* 1
AWK105 C6 474MP* 1
6.3V
4V
AWK105 C6 105MV* 1
EHS
Capacitance Temperature Dissipation factor
（Environmental
〔μF〕
characteristics
〔%〕Max.
Hazardous Substances）
RoHS
0.1
X7S
5
RoHS
0.22
RoHS
0.47
X6S
10
RoHS
1
Soldering method
R:Reflow soldering
W:Wave soldering
Capacitance
tolerance
R
±20% 〔M〕
Thickness
〔mm〕
（inch）
0.3±0.05
（0.012±0.002）
0.5±0.05
（0.020±0.002）
*1 1.5 times the rated voltage is applied to the chip during the high temperature loading test.
CAPACITORS
Rated
Voltage
●107TYPE
（0306 case size）
【Temp.char. BJ:X5R】
Soldering method
Thickness
EHS
Capacitance Temperature Dissipation factor
Capacitance
R:Reflow soldering
〔mm〕
（Environmental
〔μF〕
characteristics
〔%〕Max.
tolerance
W:Wave soldering
（inch）
Hazardous Substances）
RoHS
0.1
25V
T WK107 BJ 104MV
X5R
5
EWK107 BJ 224MV
RoHS
0.22
16V
EWK107 BJ 474MV
RoHS
0.47
0.5±0.05
1
R
±20%〔M〕
RoHS
1
X5R
10V
LWK107 BJ 105MV*
（0.020±0.002）
JWK107 BJ 105MV* 1
RoHS
1
X5R*2
10
6.3V
JWK107 BJ 225MV* 1
RoHS
2.2
X5R
1
JWK107 BJ 475MV*
RoHS
4.7
*1 1.5 times the rated voltage is applied to the chip during the high temperature loading test. *2 We may provide X7R/X7S for some items according to the individual specification.
Rated
Voltage
Ordering code
【Temp.char. B7:X7R C7:X7S C6:X6S】
EHS
Capacitance Temperature Dissipation factor
（Environmental
〔μF〕
characteristics
〔%〕Max.
Hazardous Substances）
1
25V
T WK107 B7 104MV*
RoHS
0.1
RoHS
0.22
EWK107 B7 224MV* 1
X7R
5
16V
1
RoHS
0.47
EWK107 B7 474MV*
1
RoHS
1
6.3
JWK107 C7 105MV*
X7S
AWK107 C7 225MV* 1
10
RoHS
2.2
4V
1
RoHS
4.7
X6S
AWK107 C6 475MV*
*1 1.5 times the rated voltage is applied to the chip during the high temperature loading test.
Rated
Voltage
Ordering code
Soldering method
R:Reflow soldering
W:Wave soldering
Capacitance
tolerance
R
±20%〔M〕
Soldering method
R:Reflow soldering
W:Wave soldering
Capacitance
tolerance
Thickness
〔mm〕
（inch）
0.5±0.05
（0.020±0.002）
●212TYPE
（0508 case size）
【Temp.char. BJ:X5R】
Rated
Voltage
EHS
Capacitance Temperature Dissipation factor
（Environmental
〔μF〕
characteristics
〔%〕Max.
Hazardous Substances）
Ordering code
LWK212 BJ475□D* 1
10V
1
LWK212 BJ106MD*
□ Please specify the capacitance tolerance code.
RoHS
4.7
X5R
10
R
RoHS
10
*1 1.5 times the rated voltage is applied to the chip during the high temperature loading test.
Thickness
〔mm〕
（inch）
±10%〔K〕
0.85±0.1
±20%〔M〕
（0.033±0.004）
±20%〔M〕
【Temp.char. C6:X6S】
Rated
Voltage
EHS
Capacitance Temperature Dissipation factor
（Environmental
〔μF〕
characteristics
〔%〕Max.
Hazardous Substances）
Ordering code
JWK212 C6 475□D* 1
6.3V
1
JWK212 C6 106MD*
□ Please specify the capacitance tolerance code.
RoHS
4.7
X6S
10
Soldering method
R:Reflow soldering
W:Wave soldering
R
RoHS
10
*1 1.5 times the rated voltage is applied to the chip during the high temperature loading test.
Capacitance
tolerance
Thickness
〔mm〕
（inch）
±10%〔K〕
0.85±0.1
±20%〔M〕
（0.033±0.004）
±20%〔M〕
■ ELECTRICAL CHARACTERISTICS
●Example of Impedance ESR vs. Frequency characteristics
■ Taiyo Yuden multilayer ceramic capacitor
ＪWK107BJ105MV/ＪWK107Ｃ7105MV
M
LWK212BJ106MD/JWK212C6106MD
M
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc07_e-01
1
31
ARRAY TYPE MULTILAYER CERAMIC CAPACITORS
REFLOW
■ FEATURES
■ APPLICATIONS
◦ High density and high efficiency mounting.
◦ General electronic equipment
◦ Internal electrodes are composed of nickel for improved cost performance and reliability.
◦ C ommunication equipment (cellular phone, wireless applications,
etc.)
■ ORDERING CODE
E
4
K
❶
❷
❸
❶Rated
voltage〔VDC〕
J
6.3
L
10
E
16
T
25
U
50
2
1
2
B
❹
❸End
termination
K
Plated
J
1
0
❺
❹Dimensions (EIA)
L×W
〔mm〕
096
（0302） 0.9×0.6
（0504） 1.4×1.0
110
（0805） 2.0×1.25
212
❻
❺Temperature
characteristics
code
B
BJ
X5R
B7
X7R
CH
CH
C0H
❷Series name
2 circuits
multilayer capacitor
4 circuits
4
multilayer capacitor
2
M D － T △
4
❼
❽
❻Nominal capacitance
〔pF〕
example
104
100,000
105
1,000,000
❿
T
F
⓫
⓫Internal code
Standard
△
Product
△＝Blank space
❾Special code
Standard
－
Product
❽Thickness
〔mm〕
P
0.3
K
0.45
V
0.5
B
0.6
A
0.8
D
0.85
❼Capacitance
tolerance
F
±1pF
K
±10%
M
±20%
❾
❿Packaging
φ178mm Taping
（4mm pitch）
0504, 0805 Type
φ178mm Taping
（2mm pitch）
0302 Type
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
E2
W
L
Type（EIA）
L
W
E1
E2
P
T
0.9±0.05
□2K096
0.125±0.075
0.45±0.05
0.6±0.05
0.23±0.10
（0302） （0.035±0.002）（0.024±0.002）（0.009±0.004）（0.005±0.003）（0.018±0.002）
E1
P
P
K
V
W
L
E2
T
□2K110
0.2±0.10
0.64±0.10
0.36±0.10
1.37±0.07
1.00±0.08
B
（0504） （0.054±0.003）（0.039±0.003）（0.014±0.004）（0.008±0.004）（0.025±0.004）
A
E1
P
Standard quantity [pcs]
Embossed
tape
T
□2K212
0.25±0.15
1.00±0.10
0.50±0.20
2.00±0.10
1.25±0.10
D
（0805） （0.079±0.004）（0.049±0.004）（0.020±0.008）（0.010±0.006）（0.039±0.004）
□4K212
2.00±0.10
0.25±0.15
0.50±0.10
1.25±0.10
0.25±0.10
D
（0805） （0.079±0.004）（0.049±0.004）（0.010±0.004）（0.010±0.006）（0.020±0.004）
Paper tape
0.30±0.03
（0.012±0.001）
0.45±0.05
（0.018±0.002）
0.5±0.05
（0.020±0.002）
0.60±0.06
（0.024±0.003）
0.80±0.08
（0.031±0.003）
0.85±0.10
（0.033±0.004）
0.85±0.10
（0.033±0.004）
10000
－
4000
－
4000
－
－
4000
Unit：mm
（inch）
■ AVAILABLE CAPACITANCE RANGE
CH
BJ/B7
Type
Cap
[μF]
110
2 circuits
□2K110
096
2 circuits
□2K096
Temp.
B/X5R X5R
X7R
Char
VDC 10V 6.3V 50V 25V 16V
[pF:3digits]
0.001 102
B
0.0022 222
B
0.0047 472
B
0.01 103
P
B
0.022 223
B
0.047 473
K
B
0.1 104
K
B
0.22 224
K
0.47 474
1.0 105
2.2 225
※Letters in the table indicate thickness.
Temp.char.Code
BJ
B7
CH
212
2 circuits
□2K212
B/X5R
50V
25V
16V
X5R
10V
16V
212
4 circuits
□4K212
B/X5R X5R X7R
10V 6.3V 25V
10V
Type
B/X5R
16V
25V
16V
D
D
D
X5R
10V
10V
B
B
B
Applicable standard
JIS
B
EIA
X5R
EIA
X7R
JIS
CH
EIA
C0H
B
B
B
B
B
B
A
D
D
A
A,V
V
A
D
D
D
Temperature characteristics
Temperature range
〔℃〕
Ref. Temp.
〔℃〕
20
－25～＋85
－55～＋85
25
－55～＋125
25
－55～＋125
20
－55～＋125
25
Cap
[pF]
096
2 circuits
□2K096
CH
25V
110
2 circuits
□2K110
CH
50V
Temp.Char
VDC
[pF:3digits]
10
100
P
B
12
120
P
B
15
150
P
B
18
180
P
B
22
220
P
B
27
270
P
B
33
330
P
B
39
390
P
B
47
470
P
B
56
560
P
B
68
680
P
B
82
820
P
B
100
101
P
B
※Letters in the table indicate thickness.
Capacitance change
±10［％］
±15［％］
±15［％］
±60［ppm/℃］
±60［ppm/℃］
Capacitance tolerance
〔％〕
±10（K）
±20（M）
±10（K）
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
32
1
mlcc08_e-01
■ PART NUMBERS
●096TYPE
（0302 case size）2 circuits type
【Temp.char. BJ:B/X5R】
Rated
Voltage
Ordering code
EHS
（Environmental
Hazardous
Substances）
10V
L2K096 BJ103□P
RoHS
Capacitance Temperature
〔μF〕
characteristics
0.01
J2K096 BJ473□K*1
RoHS
0.047
J2K096 BJ104□K*1
RoHS
0.1
RoHS
0.22
J2K096 BJ224MK*1
□ Please specify the capacitance tolerance code.
*1 1.5 times the rated voltage is applied to the chip during the high temperature loading test.
6.3V
Dissipation
factor
〔%〕
Max.
Soldering method
R:Reflow soldering
W:Wave soldering
B/X5R
5
R
X5R
10
Thickness
〔mm〕
（inch）
Capacitance
tolerance
0.3±0.03
±10%
〔K〕 （0.012±0.001）
±20%
〔M〕
0.45±0.05
（0.018±0.002）
±20%
〔M〕
EHS
（Environmental Capacitance Temperature
〔pF〕
Hazardous
characteristics
Substances）
T2K096 CH100FP
RoHS
10
T2K096 CH120KP
RoHS
12
T2K096 CH150KP
RoHS
15
T2K096 CH180KP
RoHS
18
T2K096 CH220KP
RoHS
22
T2K096 CH270KP
RoHS
27
25V
CH/C0H
T2K096 CH330KP
RoHS
33
T2K096 CH390KP
RoHS
39
T2K096 CH470KP
RoHS
47
T2K096 CH560KP
RoHS
56
T2K096 CH680KP
RoHS
68
T2K096 CH820KP
RoHS
82
T2K096 CH101KP
RoHS
100
Note: Please contact Taiyo Yuden sales channels about temperature characteristics other than listed above.
Rated
Voltage
Ordering code
Q
Soldering method
R:Reflow soldering
W:Wave soldering
Thickness
〔mm〕
（inch）
Capacitance
tolerance
±1ｐF
〔F〕
400+20・C
R
CAPACITORS
【Temp.char. CH:CH/C0H】
0.3±0.03
±10%
〔K〕 （0.012±0.001）
1000
●110TYPE
（0504 case size）2 circuits type
【Temp.char. BJ:B/X5R】
Rated
Voltage
50V
25V
16V
10V
6.3V
U2K110 BJ102□B
U2K110 BJ222□B
U2K110 BJ472□B
T2K110 BJ103□B
T2K110 BJ223□B
T2K110 BJ104□B
E2K110 BJ473□B
E2K110 BJ104□B
EHS
（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
E2K110 BJ105□A* 1
RoHS
1.0
L2K110 BJ224□B
RoHS
0.22
L2K110
L2K110
L2K110
J2K110
BJ474□A
BJ105□A* 1
BJ105MV* 1
BJ105□V* 1
RoHS
RoHS
RoHS
RoHS
0.47
1.0
1.0
1.0
J2K110 BJ225□A* 1
RoHS
2.2
Ordering code
Capacitance Temperature
〔μF〕
characteristics
0.001
0.0022
0.0047
0.01
0.022
0.1
0.047
0.1
B/X5R*2
Dissipation
factor
〔%〕
Max.
Soldering method
R:Reflow soldering
W:Wave soldering
Thickness
〔mm〕
（inch）
Capacitance
tolerance
3.5
0.6±0.06
（0.024±0.002）
B/X5R
B/X5R* 2
5
3.5
5
X5R
10
B/X5R
5
±10%〔K〕
±20%〔M〕
0.8±0.08
R
（0.031±0.003）
0.6±0.06
（0.024±0.002）
0.8±0.08
（0.031±0.003）
±20%〔M〕
X5R
10
±10%〔K〕
±20%〔M〕
0.5±0.05
（0.02±0.002）
0.8±0.08
（0.031±0.003）
□ Please specify the capacitance tolerance code.
*1 1.5 times the rated voltage is applied to the chip during the high temperature loading test.
*2 We may provide X7R for some items according to the individual specification.
【Temp.char. B7:X7R】
Rated
Voltage
Ordering code
U2K110 B7 102□B
U2K110 B7 222□B
U2K110 B7 472□B
T2K110 B7 103□B
25V
T2K110 B7 223□B
E2K110 B7 473□B
16V
E2K110 B7 104□B
□ Please specify the capacitance tolerance code.
50V
EHS
（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Capacitance Temperature
〔μF〕
characteristics
0.001
0.0022
0.0047
0.01
0.022
0.047
0.1
Dissipation
factor
〔%〕
Max.
3.5
X7R
Soldering method
R:Reflow soldering
W:Wave soldering
R
Capacitance
tolerance
Thickness
〔mm〕
（inch）
±10%
〔K〕
0.6±0.06
±20%
〔M〕 （0.024±0.002）
5
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc08_e-01
1
33
■ PART NUMBERS
【Temp.char. CH:CH/C0H】
EHS
（Environmental Capacitance Temperature
〔pF〕
Hazardous
characteristics
Substances）
U2K110 CH100FB
RoHS
10
U2K110 CH120KB
RoHS
12
U2K110 CH150KB
RoHS
15
U2K110 CH180KB
RoHS
18
U2K110 CH220KB
RoHS
22
U2K110 CH270KB
RoHS
27
50V
CH/C0H
U2K110 CH330KB
RoHS
33
U2K110 CH390KB
RoHS
39
U2K110 CH470KB
RoHS
47
U2K110 CH560KB
RoHS
56
U2K110 CH680KB
RoHS
68
U2K110 CH820KB
RoHS
82
U2K110 CH101KB
RoHS
100
Note: Please contact Taiyo Yuden sales channels about temperature characteristics other than listed above.
Rated
Voltage
Ordering code
Q
Soldering method
R:Reflow soldering
W:Wave soldering
Capacitance
tolerance
Thickness
〔mm〕
（inch）
±1ｐF
〔F〕
400+20・C
R
0.6±0.06
±10%
〔K〕 （0.024±0.002）
1000
●212TYPE
（0805 case size）2 circuits type
【Temp.char. BJ:B/X5R】
Rated
Voltage
Ordering code
25V
T2K212 BJ105□D
EHS
（Environmental
Hazardous
Substances）
RoHS
Capacitance Temperature
〔μF〕
characteristics
1.0
1
10V
L2K212 BJ225MD*
RoHS
2.2
□ Please specify the capacitance tolerance code.
*1 1.5 times the rated voltage is applied to the chip during the high temperature loading test.
Dissipation
factor
〔%〕
Max.
B/X5R
5
X5R
10
Soldering method
R:Reflow soldering
W:Wave soldering
R
Capacitance
tolerance
Thickness
〔mm〕
（inch）
±10%
〔K〕
0.85±0.1
±20%
〔M〕
（0.033±0.004）
±20%
〔M〕
●212TYPE
（0805 case size）4 circuits type
【Temp.char. BJ:B/X5R】
Rated
Voltage
Ordering code
25V
16V
EHS
（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
Capacitance Temperature
〔μF〕
characteristics
T4K212 BJ104□D
0.1
E4K212 BJ104□D
0.1
L4K212 BJ224□D
0.22
L4K212 BJ474□D
0.47
10V
L4K212 BJ105□D*1
1
□ Please specify the capacitance tolerance code.
*1 1.5 times the rated voltage is applied to the chip during the high temperature loading test.
*2 We may provide X7R for some items according to the individual specification.
B/X5R
B/X5R*2
Dissipation
factor
〔%〕
Max.
5
B/X5R
X5R
Soldering method
R:Reflow soldering
W:Wave soldering
R
Capacitance
tolerance
Thickness
〔mm〕
（inch）
±10%
〔K〕
0.85±0.1
±20%
〔M〕 （0.033±0.004）
10
【Temp.char. B7:X7R】
Rated
Voltage
Ordering code
EHS
（Environmental
Hazardous
Substances）
16V
E4K212 B7 104□D
RoHS
Capacitance Temperature
〔μF〕
characteristics
0.1
X7R
Dissipation
factor
〔%〕
Max.
Soldering method
R:Reflow soldering
W:Wave soldering
5
R
Capacitance
tolerance
Thickness
〔mm〕
（inch）
±10%
〔K〕
0.85±0.1
±20%
〔M〕 （0.033±0.004）
□ Please specify the capacitance tolerance code.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
34
1
mlcc08_e-01
■ ELECTRICAL CHARACTERISTICS
●Example of Impedance ESR vs. Frequency characteristics
■Taiyo Yuden multilayer ceramic capacitor
L2K096BJ103MP
100000
10000
1000
1000
100
100
10
10
1
1
0.1
0.1
0.01
0.1
1
10
100
1000 10000 100000
J2K096BJ104MK
100000
10000
0.01
0.1
T2K096CH100FP
1000000
1
10
100
1000 10000 100000
10000
1000
1000
100
100
10
10
1
1
0.1
0.1
10
100
1000
10000
ESR
Impedance
100000
10000
0.01
1
T2K096CH101KP
1000000
ESR
Impedance
100000
0.01
1
10
100
T2K110BJ103MB/T2K110B7103MB
100000
100000
E2K110BJ104MB/E2K110B7104MB
10000
10000
L2K110BJ105MA
1000
10
1
10
10
1
1
1
100
10
100
100
0.1
0.1
0.1
0.1
0.01
0.01
0.001
0.1
0.001
0.1
1
10
100
1000 10000 100000
J2K110BJ225MA
10000
1000
100
1000
1000
10000
1
10
100
1000 10000 100000
CAPACITORS
1000000
1000
〔MHz〕
〔MHz〕
0.01
0.01
0.001
0.1
0.001
0.1
1
10
100
1000 10000 100000
1
10
100
1000 10000 100000
L4K212BJ105KD
10000
1000
100
10
1
0.1
0.01
0.001
0.1
1
10
100
1000 10000 100000
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc08_e-01
1
35
■ PACKAGING
①Minimum Quantity
◦Taped packaging
Type
（EIA）
（01005）
□MK042
□MK063
（0201）
□2K096
（0302）
□WK105
（0204）
□MK105
（0402）
□VK105
（0402）
□MK107
（0603）
（0306）
□WK107
（0504）
□2K110
□MK212
（0805）
（0508）
□WK212
（0805）
□4K212
□2K212
（0805）
□MK316
（1206）
（1210）
□MK325
□MK432
（1812）
Thickness
mm
（inch）
code
0.2
（0.008）
0.3
（0.012）
0.3
（0.012）
（0.018）
0.45
0.3
（0.012）
0.5
（0.020）
0.5
（0.020）
0.5
（0.020）
0.45
（0.018）
0.5
（0.020）
（0.031）
0.8
0.5
（0.020）
0.6
（0.024）
0.8
（0.031）
0.45
（0.018）
0.85
（0.033）
1.25
（0.049）
0.85
（0.033）
0.85
（0.033）
0.85
（0.033）
1.15
（0.045）
（0.049）
1.25
1.6
（0.063）
（0.033）
0.85
1.15
（0.045）
1.9
（0.075）
（0.079）
2.0max
2.5
（0.098）
2.5
（0.098）
C
P,T
P
K
P
V
V, W
W
K
V
A
V
B
A
K
D
G
D
D
D
F
G
L
D
F
N
Y
M
M
②Taping material
※No bottom tape for pressed carrier tape
◦Paper tape
Standard quantity [pcs]
Embossed
tape
20000
15000
③Taping dimensions
◦Paper Tape（0.315 inches wide）
◦Pressed carrier tape（2mm pitch）
Paper tape
10000
—
T1
4000
—
4000
4000
—
—
3000
4000
—
—
Chip Cavity
Insertion Pitch
Tape Thickness
Ａ
Ｂ
Ｆ
Ｔ
T1
0.25
0.45
0.36max.
0.27max.
（01005）
□MK042
（0.010） （0.018）
（0.014）
（0.011）
0.37
2.0±0.05
0.67
0.45max.
0.42max.
□MK063
（0201）
（0.016） （0.027）（0.079±0.002） （0.018）
（0.017）
0.65
1.15
0.45max.
0.42max.
□WK105
（0204）
（0.026） （0.045）
（0.018max.） （0.017max.）
Type
（EIA）
Unit：mm（inch）
◦Punched carrier tape（2mm pitch）
3000
2000
—
—
500（T）, 1000（P）
500
Type
（EIA）
□2K096
（0302）
□MK105
（0402）
□VK105
（0402）
Chip Cavity
A
B
0.72
1.02
（0.028） （0.040）
0.655
1.155
（0.026） （0.045）
Insertion Pitch
F
52.0±0.05
（0.079±0.002）
Tape Thickness
T
0.45max.(0.018max.)
0.6max.(0.024max.)
0.8max.
（0.031max.）
Unit：mm（inch）
◦Punched carrier tape（4mm pitch）
◦Embossed tape
Type
（EIA）
□MK107
（0603）
□WK107
（0306）
□2K110
（0504）
Chip Cavity
A
B
1.0
1.8
（0.039） （0.071）
1.55
1.15
（0.045） （0.061）
□MK212
（0805）
（0508）
□WK212
1.65
□4K212
（0805） （0.065）
□2K212
（0805）
2.0
□MK316
（1206）
（0.079）
2.4
（0.094）
Insertion Pitch
F
Tape Thickness
T
1.1max.
（0.043max.）
1.0max.
（0.039max.）
4.0±0.1
（0.157±0.004）
1.1max.
（0.043max.）
3.6
（0.142）
Unit：mm（inch）
◦Chip filled
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_pack-P1
1
mlcc_pack_e-01
■ PACKAGING
◦Embossed tape（0.315 inches wide）
⑦Bulk Cassette
Chip Cavity
Insertion Pitch
Tape Thickness
A
B
F
K
T
1.3max.
0.25±0.1
1.0
1.8
□WK107
（0306）
（0.051max.）（0.01±0.004）
（0.039） （0.071）
1.65
2.4
□MK212
（0805）
（0.065） （0.094）
4.0±0.1
2.0
0.6max.
3.6 （0.157±0.004） 3.4max.
□MK316
（1206）
（0.079） （0.142）
（0.134max.）（0.024max.）
2.8
3.6
□MK325
（1210）
（0.110） （0.142）
Type
（EIA）
Unit：mm（inch）
Unit：mm（inch）
◦Embossed tape（0.472 inches wide）
Chip Cavity
Insertion Pitch
Tape Thickness
A
B
F
K
T
3.7
4.9
8.0±0.1
4.0max.
0.6max.
□MK432
（1812）
（0.146） （0.193）（0.315±0.004）（0.157max.）（0.024max.）
Type
（EIA）
Unit：mm（inch）
④Leader and Blank portion
50 or more
⑤Reel size
⑥Top Tape Strength
Unit
The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the arrow as illustrated below.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_pack_e-01
1
mlcc_pack-P2
■ RELIABILITY DATA
Super Low Distortion Multilayer Ceramic Capacitors and Medium-High
Voltage Multilayer Ceramic Capacitors are noted separately.
Multilayer Ceramic Capacitors
1.Operating Temperature Range
Temperature Compensating
（Class 1）
Specified
Value
Standard
High Frequency Type
−55 to ＋125℃
BJ
B7
C6
C7
High Permittivity（Class 2）
F
Specification
B
X5R
X7R
X6S
X7S
F
Y5V
Temperature Range
−25 to ＋85℃
−55 to ＋85℃
−55 to ＋125℃
−55 to ＋105℃
−55 to ＋125℃
−25 to ＋85℃
−30 to ＋85℃
2. Storage Temperature Range
Temperature Compensating
（Class 1）
Specified
Value
Standard
High Frequency Type
−55 to ＋125℃
BJ
B7
C6
C7
High Permittivity（Class 2）
F
Specification
B
X5R
X7R
X6S
X7S
F
Y5V
Temperature Range
−25 to ＋85℃
−55 to ＋85℃
−55 to ＋125℃
−55 to ＋105℃
−55 to ＋125℃
−25 to ＋85℃
−30 to ＋85℃
3. Rated Voltage
Temperature Compensating
Specified（Class 1）
Value
High Permittivity（Class 2）
Standard
High Frequency Type
4. Withstanding Voltage
（Between terminals）
Standard
Temperature Compensating
Specified（Class 1）
High Frequency Type
Value
High Permittivity
（Class 2）
【Test Methods and Remarks】
Applied voltage
Duration
Charge/discharge current
50VDC, 25VDC, 16VDC
50VDC, 16VDC
50VDC, 35VDC, 25VDC, 16VDC, 10VDC, 6.3VDC, 4VDC
No breakdown or damage
Class 1
Class 2
Rated voltage×3 Rated voltage×2.5
1 to 5 sec.
50mA max.
5. Insulation Resistance
Standard
Temperature Compensating
High Frequency Type
Specified（Class 1）
Value
High Permittivity（Class 2）Note 1
10000 MΩ min.
C≦0.047μF : 10000 MΩ min.
C＞0.047μF : 500MΩ・μF
【Test Methods and Remarks】
Applied voltage: Rated voltage
Duration: 60±5 sec.
Charge/discharge current: 50mA max.
6. Capacitance（Tolerance）
Standard
Temperature Compensating
Specified（Class 1）
Value
High Frequency Type
High Permittivity（Class 2）
【Test Methods and Remarks】
Standard
Preconditioning
Measuring frequency
Measuring voltage Note 1
Bias application
C△
U△
0.5pF≦C≦5pF：±0.25pF
0.5pF
工商网监
湘ICP备2023018690号
