NRS5030T3R3MMGJ

Notice for TAIYO YUDEN Products [ For High Quality and/or Reliability Equipment (Automotive Electronic Equipment / Industrial Equipment) ] Please read this notice before using the TAIYO YUDEN products. REMINDERS ■ Product information in this catalog is as of October 2018. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or use of our products. Please note that TAIYO YUDEN shall not be in any way responsible for any damages and defects in products or equipment incorporating our products, which are caused under the conditions other than those specified in this catalog or individual product specification sheets. ■ Please contact TAIYO YUDEN for further details of product specifications as the individual product specification sheets are available. ■ Please conduct validation and verification of our products in actual condition of mounting and operating environment before using our products. ■ The products listed in this catalog are intended for use in general electronic equipment (e.g., AV equipment, OA equipment, home electric appliances, office equipment, information and communication equipment), medical equipment classified as Class I or II by IMDRF, industrial equipment, and automotive interior applications, etc. Please be sure to contact TAIYO YUDEN for further information before using the products for any equipment which may directly cause loss of human life or bodily injury (e.g., transportation equipment including, without limitation, automotive powertrain control system, train control system, and ship control system, traffic signal equipment, medical equipment classified as Class III by IMDRF). Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g., aerospace equipment, aviation equipment*, medical equipment classified as Class IV by IMDRF, nuclear control equipment, undersea equipment, military equipment). *Note: There is a possibility that our products can be used only for aviation equipment that does not directly affect the safe operation of aircraft (e.g., in-flight entertainment, cabin light, electric seat, cooking equipment) if such use meets requirements specified separately by TAIYO YUDEN. Please be sure to contact TAIYO YUDEN for further information before using our products for such aviation equipment. When our products are used even for high safety and/or reliability-required devices or circuits of general electronic equipment, it is strongly recommended to perform a thorough safety evaluation prior to use of our products and to install a protection circuit as necessary. Please note that unless you obtain prior written consent of TAIYO YUDEN, TAIYO YUDEN shall not be in any way responsible for any damages incurred by you or third parties arising from use of the products listed in this catalog for any equipment requiring inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN as described above. ■ Information contained in this catalog is intended to convey examples of typical performances and/or applications of our products and is not intended to make any warranty with respect to the intellectual property rights or any other related rights of TAIYO YUDEN or any third parties nor grant any license under such rights. ■ Please note that the scope of warranty for our products is limited to the delivered our products themselves and TAIYO YUDEN shall not be in any way responsible for any damages resulting from a fault or defect in our products. Notwithstanding the foregoing, if there is a written agreement (e.g., supply and purchase agreement, quality assurance agreement) signed by TAIYO YUDEN and your company, TAIYO YUDEN will warrant our products in accordance with such agreement. ■ The contents of this catalog are applicable to our products which are purchased from our sales offices or authorized distributors (hereinafter“TAIYO YUDEN’ s official sales channel”). Please note that the contents of this catalog are not applicable to our products purchased from any seller other than TAIYO YUDEN’ s official sales channel. ■ Caution for Export Some of our products listed in this catalog may require specific procedures for export according to“U.S. Export Administration Regulations” ,“Foreign Exchange and Foreign Trade Control Law”of Japan, and other applicable regulations. Should you have any questions on this matter, please contact our sales staff. 19 Automotive Application Guide We classify automotive electronic equipment into the following four application categories and set usable application categories for each of our products. When using our products for automotive electronic equipment, please be sure to check such application categories and use our products accordingly. Should you have any questions on this matter, please contact us. Category SAFETY ・ABS (Anti-Lock Brake System) ・ESC (Electronic Stability Control) ・Airbag ・ADAS (Equipment that directly controls running, turning and stopping), etc. BODY & CHASSIS ・Wiper ・Automatic Door ・Power Window ・Keyless Entry System ・Electric Door Mirror ・Interior Lighting ・LED Headlight ・TPMS (Tire Pressure Monitoring System) ・Anti-Theft Device (Immobilizer), etc. INFOTAINMENT ・Car Infotainment System ・ITS/Telematics System ・Instrument Cluster ・ADAS (Sensor, Equipment that is not interlocked with safety equipment or powertrain), etc. Automotive Application Guide POWERTRAIN Automotive Electronic Equipment (Typical Example) ・Engine ECU (Electronically Controlled Fuel Injector) ・Cruise Control Unit ・4WS (4 Wheel Steering) ・Automatic Transmission ・Power Steering ・HEV/PHV/EV Core Control (Battery, Inverter, DC-DC) ・Automotive Locator (Car location information providing device), etc. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 19 15 SMD POWER INDUCTORS(NR SERIES H TYPE/S TYPE/V TYPE) SMD POWER INDUCTORS (NR SERIES H TYPE/ S TYPE/ V TYPE) REFLOW AEC-Q200 REFLOW AEC-Q200 Grade 3 (we conduct the evaluation at the test condition of Grade 3.) *Operating environment Temp:-40～85℃ ■PART NUMBER N R S ① 4 AEC-Q200 *Operating Temp. : 0 1 ② ①Series name Code NRH NRS NRV ／ POWER INDUCTORS INDUCTORS ②Dimensions（L×W×H） Code 2010 2012 2410 2412 3010 3012 3015 4010 4012 4018 5010 5012 5014 5020 5024 5030 5040 6010 6012 6014 6020 6028 6045 8030 8040 8 T △ ③ 1 0 0 ④ Series name M ⑤ D G V ⑥ V ⑦ -40～125℃（Including self-generated heat） △＝Blank space ③Packaging Code T△ Packaging Taping Coating resin specification Dimensions（L×W×H）［mm］ 2.0×2.0×1.0 2.0×2.0×1.2 2.4×2.4×1.0 2.4×2.4×1.2 3.0×3.0×1.0 3.0×3.0×1.2 3.0×3.0×1.5 4.0×4.0×1.0 4.0×4.0×1.2 4.0×4.0×1.8 4.9×4.9×1.0 4.9×4.9×1.2 4.9×4.9×1.4 4.9×4.9×2.0 4.9×4.9×2.4 4.9×4.9×3.0 4.9×4.9×4.0 6.0×6.0×1.0 6.0×6.0×1.2 6.0×6.0×1.4 6.0×6.0×2.0 6.0×6.0×2.8 6.0×6.0×4.5 8.0×8.0×3.0 8.0×8.0×4.0 ④Nominal inductance Code （example） 2R2 100 101 ※R＝Decimal point ⑤Inductance tolerance Code M N Nominal inductance［μH］ 2.2 10 100 Inductance tolerance ±20％ ±30％ ⑥Special code ⑦Internal code Code V Internal code Inductor for Industrial and Automotive ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 44 19 hq_i_smd_NR_e-E07R01 ■STANDARD EXTERNAL DIMENSIONS / STANDARD QUANTITY L H e W f e Recommended Land Patterns B Type NRV2010 NRV2012, NRS2012 NRH2410 C NRH2412 NRH3010 NRH3012, NRV3012 A A NRS3015 NRS4010 NRS4012 NRS4018 NRS8030 NRS8040 A B C 0.65 1.35 2.0 0.7 1.45 2.0 0.8 2.2 2.7 1.2 2.8 3.7 1.8 5.6 7.5 Unit：mm Type NRV2012 NRS2012 NRH2410 NRH2412 NRH3010 NRH3012 NRV3012 NRS3015 NRS4010 NRS4012 NRS4018 NRS8030 NRS8040 W 2.0±0.1 (0.079±0.004) 2.0±0.1 (0.079±0.004) 2.4±0.1 (0.095±0.00) 2.4±0.1 (0.095±0.004) 3.0±0.1 （0.118±0.004） 3.0±0.1 （0.118±0.004） 3.0±0.1 （0.118±0.004） 4.0±0.2 （0.158±0.008） 4.0±0.2 （0.158±0.008） 4.0±0.2 （0.158±0.008） 8.0±0.2 （0.315±0.008） 2.0±0.1 (0.079±0.004) 2.0±0.1 (0.079±0.004) 2.4±0.1 (0.095±0.004) 2.4±0.1 (0.095±0.004) 3.0±0.1 （0.118±0.004） 3.0±0.1 （0.118±0.004） 3.0±0.1 （0.118±0.004） 4.0±0.2 （0.158±0.008） 4.0±0.2 （0.158±0.008） 4.0±0.2 （0.158±0.008） 8.0±0.2 （0.315±0.008） 8.0±0.2 （0.315±0.008） 8.0±0.2 （0.315±0.008） *1） 0R9～6R8 type, H 1.0 max （0.039 max） 1.2 max （0.047 max） 1.0 max （0.039 max） 1.2 max （0.047 max） 1.0 max （0.039 max） 1.2 max （0.047 max） 1.5 max （0.059 max） 1.0 max （0.039 max） 1.2 max （0.047 max） 1.8 max （0.071 max） 3.0 max （0.118 max） *1） 4.2 max （0.165 max） *2） 4.0 max （0.158 max） e f 0.5±0.2 （0.020±0.008） 0.5±0.2 （0.020±0.008） 0.6±0.2 （0.024±0.008） 0.6±0.2 （0.024±0.008） 0.9±0.2 （0.035±0.008） 0.9±0.2 （0.035±0.008） 0.9±0.2 （0.035±0.008） 1.1±0.2 （0.043±0.008） 1.1±0.2 （0.043±0.008） 1.1±0.2 （0.043±0.008） 1.60±0.3 （0.063±0.012） 1.25±0.2 （0.050±0.008） 1.25±0.2 （0.050±0.008） 1.45±0.2 （0.057±0.008） 1.45±0.2 （0.057±0.008） 1.9±0.2 （0.075±0.008） 1.9±0.2 （0.075±0.008） 1.9±0.2 （0.075±0.008） 2.5±0.2 （0.098±0.008） 2.5±0.2 （0.098±0.008） 2.5±0.2 （0.098±0.008） 5.6±0.3 （0.22±0.012） 1.60±0.3 （0.063±0.012） 5.6±0.3 （0.22±0.012） *2） 100～101type Standard quantity [pcs] Taping ／ POWER INDUCTORS INDUCTORS NRV2010 L 2500 2500 2500 2500 2000 2000 2000 5000 4500 3500 1000 1000 Unit：mm（inch） hq_i_smd_NR_e-E07R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 19 45 L ΔI H e W f e Recommended Land Patterns B Type NRS5010 NRS5012 NRS5014 C NRS5020 NRS5024 NRS5030 A A NRS5040 NRS6010 NRS6012 NRS6014 NRS6020 NRS6028 NRS6045 A B C 1.5 3.6 4.0 1.6 4.7 5.7 Unit：mm Type ／ POWER INDUCTORS INDUCTORS L W 4.9±0.2 （0.193±0.008） 4.9±0.2 （0.193±0.008） 4.9±0.2 （0.193±0.008） 4.9±0.2 （0.193±0.008） 4.9±0.2 （0.193±0.008） 4.9±0.2 （0.193±0.008） 4.9±0.2 （0.193±0.008） 4.9±0.2 （0.193±0.008） NRS5024 4.9±0.2 （0.193±0.008） 4.9±0.2 （0.193±0.008） NRS5030 4.9±0.2 （0.193±0.008） 4.9±0.2 （0.193±0.008） NRS5040 4.9±0.2 （0.193±0.008） 4.9±0.2 （0.193±0.008） NRS5010 NRS5012 NRS5014 NRS5020 6.0±0.2 6.0±0.2 （0.236±0.008） （0.236±0.008） 6.0±0.2 6.0±0.2 NRS6012 （0.236±0.008） （0.236±0.008） 6.0±0.2 6.0±0.2 NRS6014 （0.236±0.008） （0.236±0.008） 6.0±0.2 6.0±0.2 NRS6020 （0.236±0.008） （0.236±0.008） 6.0±0.2 6.0±0.2 NRS6028 （0.236±0.008） （0.236±0.008） 6.0±0.2 6.0±0.2 NRS6045 （0.236±0.008） （0.236±0.008） *3) 1R0～1R5 type, *4) 2R2～330 type *5) R47～100 type, *6) 150～470 type *7） 1R5～100 type, *8） 150～470 type NRS6010 H 1.0 max （0.039 max） 1.2 max （0.047 max） 1.4 max （0.055 max） 2.0 max （0.079 max） *3) 2.5 max （0.098 max） *4) 2.4 max (0.095 max) *5) 3.1 max （0.122 max） *6) 3.0 max (0.118 max) *7） 4.1 max （0.161 max） *8） 4.0 max （0.158 max） 1.0 max （0.039 max） 1.2 max （0.047 max） 1.4 max （0.055 max） 2.0 max （0.079 max） 2.8 max （0.110 max） 4.5 max （0.177 max） Standard quantity [pcs] Taping e f ΔI 1.2±0.2 （0.047±0.008） 1.2±0.2 （0.047±0.008） 1.2±0.2 （0.047±0.008） 1.2±0.2 （0.047±0.008） 3.3±0.2 （0.130±0.008） 3.3±0.2 （0.130±0.008） 3.3±0.2 （0.130±0.008） 3.3±0.2 （0.130±0.008） 1.3typ （0.051typ） 1.3typ （0.051typ） 1.3typ （0.051typ） 1.3typ （0.051typ） 1.2±0.2 （0.047±0.008） 3.3±0.2 （0.130±0.008） 1.3typ （0.051typ） 1.2±0.2 （0.047±0.008） 3.3±0.2 （0.130±0.008） 1.3typ （0.051typ） 500 1.2±0.2 （0.047±0.008） 3.3±0.2 （0.130±0.008） 1.3typ （0.051typ） 1500 1.35±0.2 （0.053±0.008） 1.35±0.2 （0.053±0.008） 1.35±0.2 （0.053±0.008） 1.35±0.2 （0.053±0.008） 1.35±0.2 （0.053±0.008） 1.35±0.2 （0.053±0.008） 4.0±0.2 （0.158±0.008） 4.0±0.2 （0.158±0.008） 4.0±0.2 （0.158±0.008） 4.0±0.2 （0.158±0.008） 4.0±0.2 （0.158±0.008） 4.0±0.2 （0.158±0.008） 2.3typ （0.091typ） 2.3typ （0.091typ） 2.3typ （0.091typ） 2.3typ （0.091typ） 2.3typ （0.091typ） 2.3typ （0.091typ） 1000 1000 1000 800 2500 1000 1000 1000 2500 2000 1500 Unit：mm（inch） hq_i_smd_NR_e-E07R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 46 19 ■PART NUMBER ・ All the SMD Power Inductors of the catalog lineup are RoHS compliant. Note) 　・ The exchange of individual specifications is necessary depending on the application and circuit condition. Please contact Taiyo Yuden sales channels. 　・ *1: Automotive (AEC-Q200 Qualified) products for BODY & CHASSIS, and INFOTAINMENT. Please check ”Automotive Application Guide” for further details before using the products. AEC-Q200 　　＜　　　　　　　　　：AEC-Q200 qualified＞ 　　　　　All the SMD Power Inductors of　*1 marks are tested based on the test conditions and methods defined in AEC-Q200 by family item. 　 　Please consult with TAIYO YUDEN’s official sales channel for the details of the product specification and AEC-Q200 test results, etc., 　　 and please review and　approve TAIYO YUDEN's product specification before ordering. ・ *2: Industrial　products and Medical products ●NRV2010 type Part number R47N GFV R68N GFV 1R0N GFV 1R5M GFV 2R2M GFV 3R3M GFV 4R7M GFV Inductance tolerance Self-resonant frequency ［MHz］（min.） DC Resistance ［Ω］（±20％） 0.47 0.68 1.0 1.5 2.2 3.3 4.7 ±30％ ±30％ ±30％ ±20％ ±20％ ±20％ ±20％ - 0.052 0.060 0.080 0.100 0.175 0.250 0.320 Nominal inductance ［μH］ Inductance tolerance Self-resonant frequency ［MHz］（min.） DC Resistance ［Ω］（±20％） 1.0 1.5 2.2 3.3 4.7 ±30％ ±30％ ±20％ ±20％ ±20％ - 0.073 0.100 0.129 0.227 0.325 Nominal inductance ［μH］ Inductance tolerance Self-resonant frequency ［MHz］（min.） DC Resistance ［Ω］（±20％） 1.0 1.5 2.2 3.3 4.7 ±30％ ±30％ ±20％ ±20％ ±20％ - 0.070 0.090 0.107 0.190 0.241 Nominal inductance ［μH］ Inductance tolerance Self-resonant frequency ［MHz］（min.） DC Resistance ［Ω］（±20％） 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 ±30％ ±30％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ 120 106 94 77 56 50 43 32 27 22 0.060 0.070 0.110 0.150 0.220 0.290 0.410 0.690 1.02 1.47 Nominal inductance ［μH］ Inductance tolerance Self-resonant frequency ［MHz］（min.） DC Resistance ［Ω］（±20％） 0.47 1.0 1.5 2.2 3.3 4.7 6.8 10 ±30％ ±30％ ±30％ ±20％ ±20％ ±20％ ±20％ ±20％ 180 101 89 72 56 45 34 29 0.050 0.077 0.100 0.140 0.225 0.300 0.420 0.600 Rated current　※）　［mA］ Temperature rise current Saturation current Idc2 Idc1 2,100 2,000 1,850 1,850 1,550 1,600 1,350 1,450 1,100 1,100 880 1,000 760 820 Measuring frequency［kHz］ 100 100 100 100 100 100 100 Note *1, *1, *1, *1, *1, *1, *1, *2 *2 *2 *2 *2 *2 *2 ●NRV2012 type Part number NRV2012T NRV2012T NRV2012T NRV2012T NRV2012T 1R0N GFV 1R5N GFV 2R2M GFV 3R3M GFV 4R7M GFV Rated current　※）　［mA］ Saturation current Temperature rise current Idc1 Idc2 2,200 1,650 1,800 1,400 1,600 1,200 1,250 900 1,100 750 Measuring frequency［kHz］ 100 100 100 100 100 Note *1, *1, *1, *1, *1, *2 *2 *2 *2 *2 ●NRS2012 Shielded type Part number NRS2012T NRS2012T NRS2012T NRS2012T NRS2012T 1R0N GJV 1R5N GJV 2R2M GJV 3R3M GJV 4R7M GJV Rated current　※）　［mA］ Saturation current Temperature rise current Idc1 Idc2 1,900 1,700 1,650 1,500 1,350 1,370 1,000 1,020 900 910 Measuring frequency［kHz］ 100 100 100 100 100 Note *1, *1, *1, *1, *1, *2 *2 *2 *2 *2 ／ POWER INDUCTORS INDUCTORS NRV2010T NRV2010T NRV2010T NRV2010T NRV2010T NRV2010T NRV2010T Nominal inductance ［μH］ ●NRH2410 Shielded type Part number NRH2410T NRH2410T NRH2410T NRH2410T NRH2410T NRH2410T NRH2410T NRH2410T NRH2410T NRH2410T R68NN 4V 1R0NN 4V 1R5MN V 2R2MN V 3R3MN V 4R7MN V 6R8MN V 100MN V 150MN V 220MN V Rated current　※）　［mA］ Saturation current Temperature rise current Idc1 Idc2 2,200 1,570 1,800 1,410 1,550 1,160 1,290 970 1,000 770 880 670 750 570 550 450 470 370 390 300 Measuring frequency［kHz］ Note 100 100 100 100 100 100 100 100 100 100 *1, *2 *1, *2 *1, *2 *1, *2 *1, *2 *1, *2 *1, *2 *1, *2 *1, *2 *1, *2 Measuring frequency［kHz］ Note ●NRH2412 Shielded type Part number NRH2412T NRH2412T NRH2412T NRH2412T NRH2412T NRH2412T NRH2412T NRH2412T R47NNGJV 1R0NNGHV 1R5NNGHV 2R2MNGHV 3R3MNGHV 4R7MNGHV 6R8MNGHV 100MNGHV Rated current　※）　［mA］ Saturation current Temperature rise current Idc1 Idc2 2,900 2,100 2,350 1,300 2,100 1,150 1,700 1,000 1,400 750 1,150 650 950 550 810 450 100 100 100 100 100 100 100 100 *1, *1, *1, *1, *1, *1, *1, *1, *2 *2 *2 *2 *2 *2 *2 *2  ） The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃) ※ ※） The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃) ※） The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value. hq_i_smd_NR_e-E07R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 19 47 ■PART NUMBER ●NRH3010 Shielded type Part number NRH3010T 1R2NN NRH3010T 1R5NN NRH3010T 2R2MN NRH3010T 3R3MN NRH3010T 4R7MN NRH3010T 6R8MN NRH3010T 100MN NRH3010T 150MN NRH3010T 220MN NRH3010T 470MN V V V V V V V V V V Nominal inductance ［μH］ Inductance tolerance Self-resonant frequency ［MHz］（min.） DC Resistance ［Ω］（±20％） 1.2 1.5 2.2 3.3 4.7 6.8 10 15 22 47 ±30％ ±30％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ 120 99 86 64 50 44 34 25 22 17 0.065 0.075 0.083 0.130 0.170 0.250 0.350 0.550 0.770 2.05 Nominal inductance ［μH］ Inductance tolerance Self-resonant frequency ［MHz］（min.） DC Resistance ［Ω］（±20％） 0.47 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 ±30％ ±30％ ±30％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ 160 111 95 78 61 50 43 32 26 22 0.033 0.048 0.055 0.075 0.100 0.130 0.190 0.270 0.450 0.630 Nominal inductance ［μH］ Inductance tolerance Self-resonant frequency ［MHz］（min.） DC Resistance ［Ω］（±20％） 1.0 1.5 2.2 3.3 4.7 6.8 10 ±30％ ±30％ ±20％ ±20％ ±20％ ±20％ ±20％ 110 92 70 55 48 40 32 0.065 0.075 0.120 0.150 0.190 0.300 0.470 Nominal inductance ［μH］ Inductance tolerance Self-resonant frequency ［MHz］（min.） DC Resistance ［Ω］（±20％） 1.0 1.5 2.2 3.3 4.7 6.8 10 22 ±30％ ±30％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ 100 87 64 49 40 36 28 20 0.030 0.038 0.058 0.078 0.120 0.160 0.220 0.520 Nominal inductance ［μH］ Inductance tolerance Self-resonant frequency ［MHz］（min.） DC Resistance ［Ω］（±20％） 1.0 2.2 3.3 4.7 6.8 10 15 22 ±30％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ 116 73 58 47 38 31 24 19 0.056 0.085 0.100 0.140 0.200 0.300 0.430 0.570 Nominal inductance ［μH］ Inductance tolerance Self-resonant frequency ［MHz］（min.） DC Resistance ［Ω］（±20％） 1.0 2.2 3.3 4.7 6.8 10 15 22 ±30％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ 100 70 60 45 35 30 24 18 0.042 0.060 0.070 0.095 0.125 0.170 0.260 0.400 Rated current　※）　［mA］ Temperature rise current Saturation current Idc2 Idc1 1,700 1,480 1,440 1,370 1,300 1,300 1,000 1,030 850 900 700 745 600 620 450 480 380 410 250 285 Measuring frequency［kHz］ 100 100 100 100 100 100 100 100 100 100 Note *1, *1, *1, *1, *1, *1, *1, *1, *1, *1, *2 *2 *2 *2 *2 *2 *2 *2 *2 *2 ●NRH3012 Shielded type Part number ／ POWER INDUCTORS INDUCTORS NRH3012T NRH3012T NRH3012T NRH3012T NRH3012T NRH3012T NRH3012T NRH3012T NRH3012T NRH3012T R47NN 1R0NN 1R5NN 2R2MN 3R3MN 4R7MN 6R8MN 100MN 150MN 220MN V V V V V V V V V V Rated current　※）　［mA］ Saturation current Temperature rise current Idc1 Idc2 2,600 1,900 2,200 1,710 1,700 1,600 1,500 1,370 1,200 1,210 1,000 1,060 850 890 730 720 530 570 500 500 Measuring frequency［kHz］ 100 100 100 100 100 100 100 100 100 100 Note *1, *1, *1, *1, *1, *1, *1, *1, *1, *1, *2 *2 *2 *2 *2 *2 *2 *2 *2 *2 ●NRV3012 Shielded type Part number NRV3012T 1R0N NRV3012T 1R5N NRV3012T 2R2M NRV3012T 3R3M NRV3012T 4R7M NRV3012T 6R8M NRV3012T 100M V V V V V V V Rated current　※）　［mA］ Saturation current Temperature rise current Idc1 Idc2 2,500 1,600 2,100 1,400 1,800 1,100 1,600 1,000 1,250 850 950 650 800 550 Measuring frequency［kHz］ Note 100 100 100 100 100 100 100 *1, *2 *1, *2 *1, *2 *1, *2 *1, *2 *1, *2 *1, *2 Measuring frequency［kHz］ Note ●NRS3015 Shielded type Part number NRS3015T NRS3015T NRS3015T NRS3015T NRS3015T NRS3015T NRS3015T NRS3015T 1R0NNGHV 1R5NNGHV 2R2MNGHV 3R3MNGHV 4R7MNGHV 6R8MNGHV 100MNGHV 220MNGHV Rated current　※）　［mA］ Saturation current Temperature rise current Idc1 Idc2 2,100 2,100 1,800 1,820 1,480 1,500 1,210 1,230 1,020 1,040 870 880 700 710 470 470 100 100 100 100 100 100 100 100 *1, *1, *1, *1, *1, *1, *1, *1, *2 *2 *2 *2 *2 *2 *2 *2 ●NRS4010 Shielded type Part number NRS4010T NRS4010T NRS4010T NRS4010T NRS4010T NRS4010T NRS4010T NRS4010T 1R0NDGGV 2R2MDGGV 3R3MDGGV 4R7MDGGV 6R8MDGGV 100MDGGV 150MDGGV 220MDGGV Rated current　※）　［mA］ Saturation current Temperature rise current Idc1 Idc2 2,000 1,900 1,200 1,500 1,100 1,400 950 1,200 800 1,000 620 750 540 600 450 500 Measuring frequency［kHz］ 100 100 100 100 100 100 100 100 Note *1, *1, *1, *1, *1, *1, *1, *1, *2 *2 *2 *2 *2 *2 *2 *2 ●NRS4012 Shielded type Part number NRS4012T NRS4012T NRS4012T NRS4012T NRS4012T NRS4012T NRS4012T NRS4012T 1R0NDGGV 2R2MDGJV 3R3MDGJV 4R7MDGJV 6R8MDGJV 100MDGJV 150MDGJV 220MDGJV Rated current　※）　［mA］ Saturation current Temperature rise current Idc1 Idc2 2,800 2,200 1,650 1,900 1,400 1,700 1,200 1,500 900 1,300 800 1,100 650 750 500 620 Measuring frequency［kHz］ 100 100 100 100 100 100 100 100 Note *1, *1, *1, *1, *1, *1, *1, *1, *2 *2 *2 *2 *2 *2 *2 *2  ） The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃) ※ ※） The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃) ※） The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value. hq_i_smd_NR_e-E07R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 48 19 ■PART NUMBER ●NRS4018 Shielded type Part number Nominal inductance ［μH］ Inductance tolerance Self-resonant frequency ［MHz］（min.） DC Resistance ［Ω］（±20％） NRS4018T 1R0NDGJV NRS4018T 1R5NDGJV NRS4018T 2R2MDGJV NRS4018T 3R3MDGJV NRS4018T 4R7MDGJV NRS4018T 6R8MDGJV NRS4018T 100MDGJV NRS4018T 150MDGJV NRS4018T 220MDGJV NRS4018T 330MDGJV NRS4018T 470MDGJV NRS4018T 680MDGJV NRS4018T 101MDGJV NRS4018T 151MDGJV NRS4018T 221MDGJV 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 ±30％ ±30％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ 90 75 60 45 35 30 25 18 15 12 10 8.3 6.5 5.5 4.0 0.027 0.037 0.042 0.055 0.070 0.098 0.150 0.210 0.290 0.460 0.650 1.00 1.45 2.30 3.80 Nominal inductance ［μH］ Inductance tolerance Self-resonant frequency ［MHz］（min.） DC Resistance ［Ω］（±20％） 1.0 2.2 3.3 4.7 6.8 10 15 22 ±30％ ±30％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ 95 65 42 37 33 23 19 15 0.070 0.105 0.125 0.145 0.185 0.250 0.400 0.600 Nominal inductance ［μH］ Inductance tolerance Self-resonant frequency ［MHz］（min.） DC Resistance ［Ω］（±20％） 1.0 1.5 2.2 3.3 4.7 6.8 10 15 ±30％ ±30％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ 100 86 70 48 40 36 26 22 0.053 0.070 0.085 0.160 0.180 0.260 0.420 0.670 Nominal inductance ［μH］ Inductance tolerance Self-resonant frequency ［MHz］（min.） DC Resistance ［Ω］（±20％） 0.47 1.2 2.2 3.3 4.7 6.8 10 15 22 ±30％ ±30％ ±30％ ±30％ ±30％ ±20％ ±20％ ±20％ ±20％ 185 86 56 48 41 33 27 20 16 0.025 0.045 0.065 0.080 0.100 0.150 0.200 0.320 0.450 Nominal inductance ［μH］ Inductance tolerance Self-resonant frequency ［MHz］（min.） DC Resistance ［Ω］（±20％） 0.47 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 47 100 ±30％ ±30％ ±30％ ±30％ ±30％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ 230 81 68 57 46 37 30 24 20 17 12 7 0.012 0.021 0.026 0.035 0.048 0.060 0.090 0.120 0.165 0.260 0.435 0.850 Rated current　※）　［mA］ Temperature rise current Saturation current Idc2 Idc1 4,000 3,200 3,300 2,400 3,000 2,200 2,300 2,000 2,000 1,700 1,600 1,450 1,300 1,200 1,100 850 900 720 700 550 600 440 520 320 420 280 340 220 275 170 Measuring frequency［kHz］ 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Note *1, *1, *1, *1, *1, *1, *1, *1, *1, *1, *1, *1, *1, *1, *1, *2 *2 *2 *2 *2 *2 *2 *2 *2 *2 *2 *2 *2 *2 *2 ●NRS5010 type Part number 1R0NMGFV 2R2NMGFV 3R3MMGFV 4R7MMGFV 6R8MMGFV 100MMGFV 150MMGFV 220MMGFV Measuring frequency［kHz］ 100 100 100 100 100 100 100 100 Note *1, *1, *1, *1, *1, *1, *1, *1, *2 *2 *2 *2 *2 *2 *2 *2 ●NRS5012 type Part number NRS5012T NRS5012T NRS5012T NRS5012T NRS5012T NRS5012T NRS5012T NRS5012T 1R0NMGFV 1R5NMGFV 2R2MMGFV 3R3MMGFV 4R7MMGFV 6R8MMGFV 100MMGFV 150MMGFV Rated current　※）　［mA］ Saturation current Temperature rise current Idc1 Idc2 4,500 2,300 3,800 2,200 3,100 2,000 2,400 1,450 2,200 1,400 1,700 1,100 1,400 850 1,200 640 Measuring frequency［kHz］ 100 100 100 100 100 100 100 100 Note *1, *1, *1, *1, *1, *1, *1, *1, *2 *2 *2 *2 *2 *2 *2 *2 ／ POWER INDUCTORS INDUCTORS NRS5010T NRS5010T NRS5010T NRS5010T NRS5010T NRS5010T NRS5010T NRS5010T Rated current　※）　［mA］ Saturation current Temperature rise current Idc1 Idc2 2,350 1,750 1,500 1,400 1,400 1,250 1,200 1,150 1,000 1,000 850 900 680 650 550 450 ●NRS5014 Shielded type Part number NRS5014T NRS5014T NRS5014T NRS5014T NRS5014T NRS5014T NRS5014T NRS5014T NRS5014T R47NMGGV 1R2NMGGV 2R2NMGGV 3R3NMGGV 4R7NMGGV 6R8MMGGV 100MMGGV 150MMGGV 220MMGGV Rated current　※）　［mA］ Saturation current Temperature rise current Idc1 Idc2 5,800 3,300 3,800 2,400 2,800 2,000 2,350 1,700 2,050 1,400 1,600 1,200 1,400 1,050 1,100 650 900 550 Measuring frequency［kHz］ 100 100 100 100 100 100 100 100 100 Note *1, *1, *1, *1, *1, *1, *1, *1, *1, *2 *2 *2 *2 *2 *2 *2 *2 *2 ●NRS5020 Shielded type Part number NRS5020T NRS5020T NRS5020T NRS5020T NRS5020T NRS5020T NRS5020T NRS5020T NRS5020T NRS5020T NRS5020T NRS5020T R47NMGJV 1R0NMGJV 1R5NMGJV 2R2NMGJV 3R3NMGJV 4R7MMGJV 6R8MMGJV 100MMGJV 150MMGJV 220MMGJV 470MMGJV 101MMGJV Rated current　※）　［mA］ Saturation current Temperature rise current Idc1 Idc2 6,100 5,000 4,000 3,600 3,350 3,200 2,900 2,900 2,400 2,400 2,000 2,000 1,600 1,650 1,300 1,450 1,100 1,200 900 1,000 630 560 420 400 Measuring frequency［kHz］ 100 100 100 100 100 100 100 100 100 100 100 100 Note *1, *1, *1, *1, *1, *1, *1, *1, *1, *1, *1, *1, *2 *2 *2 *2 *2 *2 *2 *2 *2 *2 *2 *2  ） The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃) ※ ※） The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃) ※） The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value. hq_i_smd_NR_e-E07R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 19 49 ■PART NUMBER ●NRS5024 Shielded type Part number NRS5024T NRS5024T NRS5024T NRS5024T NRS5024T NRS5024T NRS5024T NRS5024T NRS5024T NRS5024T 1R0NMGJV 1R5NMGJV 2R2NMGJV 3R3NMGJV 4R7MMGJV 6R8MMGJV 100MMGJV 150MMGJV 220MMGJV 330MMGJV Nominal inductance ［μH］ Inductance tolerance Self-resonant frequency ［MHz］（min.） DC Resistance ［Ω］（±20％） 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 ±30％ ±30％ ±30％ ±30％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ 85 67 51 41 37 28 21 18 15 11 0.016 0.022 0.029 0.043 0.055 0.080 0.125 0.170 0.230 0.370 Nominal inductance ［μH］ Inductance tolerance Self-resonant frequency ［MHz］（min.） DC Resistance ［Ω］（±30％） 0.47 1.0 2.2 3.3 4.7 6.8 10 15 22 33 47 ±30％ ±30％ ±30％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ 185 110 46 36 31 22 20 14 13 10 9 0.010 0.015 0.023 0.030 0.035 0.052 0.070 0.125 0.180 0.225 0.325 Nominal inductance ［μH］ Inductance tolerance Self-resonant frequency ［MHz］（min.） DC Resistance ［Ω］（±30％） 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 ±30％ ±30％ ±30％ ±30％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ 60 42 32 28 21 18 13 9 7 6 0.017 0.022 0.027 0.029 0.049 0.056 0.080 0.126 0.180 0.310 Nominal inductance ［μH］ Inductance tolerance Self-resonant frequency ［MHz］（min.） DC Resistance ［Ω］（±20％） 1.5 2.2 3.3 4.7 6.8 10 22 ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ 77 56 42 36 30 25 12 0.090 0.110 0.135 0.165 0.220 0.270 0.580 Nominal inductance ［μH］ Inductance tolerance Self-resonant frequency ［MHz］（min.） DC Resistance ［Ω］（±20％） 1.0 1.5 2.5 3.3 4.7 5.3 6.8 10 15 22 33 47 68 100 ±30％ ±30％ ±30％ ±30％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ 95 69 45 42 36 34 30 22 18 12 8 6 3 1 0.050 0.067 0.090 0.105 0.125 0.125 0.165 0.200 0.295 0.465 0.580 0.965 1.16 1.67 Rated current　※）　［mA］ Temperature rise current Saturation current Idc2 Idc1 5,800 4,400 5,200 3,600 4,100 3,100 3,100 2,400 2,700 2,000 2,200 1,600 1,700 1,200 1,400 1,000 1,200 820 1,000 630 Measuring frequency［kHz］ 100 100 100 100 100 100 100 100 100 100 Note *1, *1, *1, *1, *1, *1, *1, *1, *1, *1, *2 *2 *2 *2 *2 *2 *2 *2 *2 *2 ●NRS5030 Shielded type Part number ／ POWER INDUCTORS INDUCTORS NRS5030T NRS5030T NRS5030T NRS5030T NRS5030T NRS5030T NRS5030T NRS5030T NRS5030T NRS5030T NRS5030T R47NMGJV 1R0NMGJV 2R2NMGJV 3R3MMGJV 4R7MMGJV 6R8MMGJV 100MMGJV 150MMGJV 220MMGJV 330MMGJV 470MMGJV Rated current　※）　［mA］ Saturation current Temperature rise current Idc1 Idc2 9,000 5,000 6,600 4,000 4,200 3,500 3,600 3,000 3,100 2,600 2,500 2,300 2,100 1,700 1,600 1,400 1,400 1,050 1,150 800 950 700 Measuring frequency［kHz］ 100 100 100 100 100 100 100 100 100 100 100 Note *1, *1, *1, *1, *1, *1, *1, *1, *1, *1, *1, *2 *2 *2 *2 *2 *2 *2 *2 *2 *2 *2 ●NRS5040 Shielded type Part number NRS5040T NRS5040T NRS5040T NRS5040T NRS5040T NRS5040T NRS5040T NRS5040T NRS5040T NRS5040T 1R5NMGJV 2R2NMGJV 3R3NMGJV 4R7NMGKV 6R8MMGJV 100MMGJV 150MMGJV 220MMGKV 330MMGJV 470MMGJV Rated current　※）　［mA］ Saturation current Temperature rise current Idc1 Idc2 6,400 4,500 5,000 3,700 4,000 3,300 3,300 3,100 2,800 2,400 2,300 2,100 2,000 1,800 1,500 1,400 1,300 1,200 1,100 900 Measuring frequency［kHz］ 100 100 100 100 100 100 100 100 100 100 Note *1, *1, *1, *1, *1, *1, *1, *1, *1, *1, *2 *2 *2 *2 *2 *2 *2 *2 *2 *2 ●NRS6010 type Part number NRS6010T NRS6010T NRS6010T NRS6010T NRS6010T NRS6010T NRS6010T 1R5MMGFV 2R2MMGFV 3R3MMGFV 4R7MMGFV 6R8MMGFV 100MMGFV 220MMGFV Rated current　※）　［mA］ Saturation current Temperature rise current Idc1 Idc2 2,400 1,900 1,900 1,700 1,600 1,500 1,300 1,400 1,200 1,200 1,000 1,100 650 700 Measuring frequency［kHz］ 100 100 100 100 100 100 100 Note *1, *1, *1, *1, *1, *1, *1, *2 *2 *2 *2 *2 *2 *2 ●NRS6012 Shielded type Part number NRS6012T NRS6012T NRS6012T NRS6012T NRS6012T NRS6012T NRS6012T NRS6012T NRS6012T NRS6012T NRS6012T NRS6012T NRS6012T NRS6012T 1R0NMGJV 1R5NMGGV 2R5NMGGV 3R3NMGGV 4R7MMGGV 5R3MMGJV 6R8MMGJV 100MMGJV 150MMGJV 220MMGJV 330MMGJV 470MMGJV 680MMGJV 101MMGJV Rated current　※）　［mA］ Saturation current Temperature rise current Idc1 Idc2 3,000 2,400 2,600 2,100 2,100 1,800 1,800 1,700 1,600 1,550 1,500 1,550 1,300 1,350 1,000 1,200 800 800 760 650 590 550 520 460 440 410 350 320 Measuring frequency［kHz］ 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Note *1, *1, *1, *1, *1, *1, *1, *1, *1, *1, *1, *1, *1, *1, *2 *2 *2 *2 *2 *2 *2 *2 *2 *2 *2 *2 *2 *2  ） The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃) ※ ※） The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃) ※） The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value. hq_i_smd_NR_e-E07R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 50 19 ■PART NUMBER ●NRS6014 Shielded type Nominal inductance ［μH］ Inductance tolerance Self-resonant frequency ［MHz］（min.） DC Resistance ［Ω］（±20％） 1.2 2.2 3.3 4.7 6.8 10 15 22 ±30％ ±30％ ±30％ ±20％ ±20％ ±20％ ±20％ ±20％ 77 61 41 36 30 24 20 16 0.042 0.055 0.075 0.090 0.115 0.140 0.210 0.300 Nominal inductance ［μH］ Inductance tolerance Self-resonant frequency ［MHz］（min.） DC Resistance ［Ω］（±20％） 0.8 1.5 2.2 3.3 4.7 6.8 10 22 ±30％ ±30％ ±30％ ±30％ ±30％ ±30％ ±20％ ±20％ 110 93 73 55 43 30 18 11 0.020 0.026 0.034 0.040 0.058 0.085 0.125 0.290 Nominal inductance ［μH］ Inductance tolerance Self-resonant frequency ［MHz］（min.） DC Resistance ［Ω］（±30％） 0.9 1.5 2.2 3.0 4.7 6.8 10 15 22 33 47 68 100 ±30％ ±30％ ±30％ ±30％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ 90 78 68 55 39 25 20 17 12 10 8 5 3 0.013 0.016 0.020 0.023 0.031 0.043 0.065 0.095 0.135 0.220 0.300 0.420 0.600 Part number Nominal inductance ［μH］ Inductance tolerance Self-resonant frequency ［MHz］（min.） DC Resistance ［Ω］（±30％） NRS6045T 1R0NMGKV NRS6045T 1R3NMGKV NRS6045T 1R8NMGKV NRS6045T 2R3NMGKV NRS6045T 3R0NMGKV NRS6045T 4R5MMGKV NRS6045T 6R3MMGKV NRS6045T 100MMGKV NRS6045T 150MMGKV NRS6045T 220MMGKV NRS6045T 330MMGKV NRS6045T 470MMGKV NRS6045T 680MMGKV NRS6045T 101MMGKV 1.0 1.3 1.8 2.3 3.0 4.5 6.3 10 15 22 33 47 68 100 ±30％ ±30％ ±30％ ±30％ ±30％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ 110 95 80 60 45 25 15 12 10 7 6 5 4 3 0.014 0.016 0.019 0.022 0.024 0.030 0.036 0.046 0.070 0.107 0.141 0.211 0.304 0.466 Nominal inductance ［μH］ Inductance tolerance Self-resonant frequency ［MHz］（min.） DC Resistance ［Ω］（±30％） 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 ±30％ ±30％ ±30％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ 120 80 60 50 40 32 27 20 16 13 11 0.009 0.012 0.015 0.019 0.022 0.029 0.033 0.060 0.070 0.120 0.170 Part number NRS6014T NRS6014T NRS6014T NRS6014T NRS6014T NRS6014T NRS6014T NRS6014T 1R2NMGGV 2R2NMGGV 3R3NMGGV 4R7MMGGV 6R8MMGGV 100MMGGV 150MMGGV 220MMGGV Rated current　※）　［mA］ Temperature rise current Saturation current Idc2 Idc1 4,000 2,750 3,000 2,300 2,500 2,000 2,000 1,900 1,700 1,650 1,400 1,400 1,150 1,200 950 1,000 Measuring frequency［kHz］ 100 100 100 100 100 100 100 100 Note *1, *1, *1, *1, *1, *1, *1, *1, *2 *2 *2 *2 *2 *2 *2 *2 ●NRS6020 Shielded type Part number 0R8NMGGV 1R5NMGJV 2R2NMGJV 3R3NMGJV 4R7NMGJV 6R8NMGJV 100MMGGV 220MMGGV Measuring frequency［kHz］ 100 100 100 100 100 100 100 100 Note *1, *1, *1, *1, *1, *1, *1, *1, *2 *2 *2 *2 *2 *2 *2 *2 ●NRS6028 Shielded type Part number NRS6028T NRS6028T NRS6028T NRS6028T NRS6028T NRS6028T NRS6028T NRS6028T NRS6028T NRS6028T NRS6028T NRS6028T NRS6028T 0R9NMGJV 1R5NMGJV 2R2NMGJV 3R0NMGJV 4R7MMGKV 6R8MMGJV 100MMGKV 150MMGJV 220MMGJV 330MMGJV 470MMGJV 680MMGJV 101MMGJV Rated current　※）　［mA］ Saturation current Temperature rise current Idc1 Idc2 6,700 4,600 5,100 4,200 4,200 3,700 3,600 3,400 2,700 3,000 2,600 2,500 1,900 1,900 1,600 1,800 1,300 1,400 1,100 1,100 1,000 920 800 770 650 660 Measuring frequency［kHz］ 100 100 100 100 100 100 100 100 100 100 100 100 100 Note *1, *1, *1, *1, *1, *1, *1, *1, *1, *1, *1, *1, *1, *2 *2 *2 *2 *2 *2 *2 *2 *2 *2 *2 *2 *2 ●NRS6045 Shielded type Rated current　※）　［mA］ Saturation current Temperature rise current Idc1 Idc2 9,800 4,500 8,200 4,200 7,200 3,900 6,400 3,600 5,600 3,300 4,400 3,100 3,600 3,000 3,100 2,400 2,500 1,900 2,000 1,600 1,650 1,400 1,400 1,150 1,100 950 900 750 Measuring frequency［kHz］ Note 100 100 100 100 100 100 100 100 100 100 100 100 100 100 *1, *2 *1, *2 *1, *2 *1, *2 *1, *2 *1, *2 *1, *2 *1, *2 *1, *2 *1, *2 *1, *2 *1, *2 *1, *2 *1, *2 Measuring frequency［kHz］ Note 100 100 100 100 100 100 100 100 100 100 100 *1, *2 *1, *2 *1, *2 *1, *2 *1, *2 *1, *2 *1, *2 *1, *2 *1, *2 *1, *2 *1, *2 ／ POWER INDUCTORS INDUCTORS NRS6020T NRS6020T NRS6020T NRS6020T NRS6020T NRS6020T NRS6020T NRS6020T Rated current　※）　［mA］ Saturation current Temperature rise current Idc1 Idc2 6,400 4,100 4,300 3,600 3,200 2,900 2,800 2,750 2,400 2,150 2,000 1,800 1,900 1,500 1,250 950 ●NRS8030 Shielded type Part number NRS8030T 1R0NJGJV NRS8030T 1R5NJGJV NRS8030T 2R2NJGJV NRS8030T 3R3MJGJV NRS8030T 4R7MJGJV NRS8030T 6R8MJGJV NRS8030T 100MJGJV NRS8030T 150MJGJV NRS8030T 220MJGJV NRS8030T 330MJGJV NRS8030T 470MJGJV Rated current　※）　［mA］ Saturation current Temperature rise current Idc1 Idc2 7,800 6,200 6,200 5,300 4,900 4,800 4,200 4,300 3,600 4,000 3,000 3,400 2,400 3,000 2,000 2,200 1,750 1,900 1,300 1,500 1,100 1,300  ） The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃) ※ ※） The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃) ※） The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value. hq_i_smd_NR_e-E07R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 19 51 ■PART NUMBER ●NRS8040 Shielded type Part number NRS8040T 0R9NJGJV NRS8040T 1R4NJGJV NRS8040T 2R0NJGJV NRS8040T 3R6NJGJV NRS8040T 4R7NJGJV NRS8040T 6R8NJGJV NRS8040T 100MJGJV NRS8040T 150MJGJV NRS8040T 220MJGJV NRS8040T 330MJGKV NRS8040T 470MJGKV NRS8040T 101MJGKV Nominal inductance ［μH］ Inductance tolerance Self-resonant frequency ［MHz］（min.） DC Resistance ［Ω］（±30％） 0.9 1.4 2.0 3.6 4.7 6.8 10 15 22 33 47 100 ±30％ ±30％ ±30％ ±30％ ±30％ ±30％ ±20％ ±20％ ±20％ ±20％ ±20％ ±20％ 85 63 50 34 30 24 22 16 13 12 8 6 0.006 0.007 0.009 0.015 0.018 0.025 0.034 0.050 0.066 0.100 0.140 0.280 Rated current　※）　［mA］ Temperature rise current Saturation current Idc2 Idc1 13,000 7,800 10,000 7,000 8,100 6,300 6,400 4,900 5,400 4,100 4,400 3,700 3,800 3,100 2,900 2,400 2,400 2,200 2,000 1,700 1,500 1,500 1,100 1,000 Measuring frequency［kHz］ 100 100 100 100 100 100 100 100 100 100 100 100 Note *1, *1, *1, *1, *1, *1, *1, *1, *1, *1, *1, *1, *2 *2 *2 *2 *2 *2 *2 *2 *2 *2 *2 *2  ） The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃) ※ ※） The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃) ※） The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value. ／ POWER INDUCTORS INDUCTORS hq_i_smd_NR_e-E07R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 52 19 ■ Derating of Rated Current ●NR series H type/S type/V type Derating of current is necessary for NR-series H type/S type/V type depending on ambient temperature. Please refer to the chart shown below for appropriate derating of current. 60 40 Idc1 Idc2 20 0 -40 -20 120 80 60 40 20 0 -40 -20 120 Idc1 Idc2 60 40 20 0 -40 -20 Idc1 Idc2 0 20 40 60 80 100 120 140 Ambient Temperature (℃) 40 20 Idc1 Idc2 60 40 20 120 Idc1 Idc2 60 40 20 0 -40 -20 Idc1 Idc2 0 20 40 60 80 100 120 140 Ambient Temperature (℃) 60 40 20 Idc1 Idc2 60 40 120 Idc1 Idc2 100 80 60 40 20 0 -40 -20 Idc1 Idc2 0 20 40 60 80 100 120 140 Ambient Temperature (℃) NRV3012 type 80 60 40 20 Idc1 Idc2 0 20 40 60 80 100 120 140 Ambient Temperature (℃) NRS4018 type 100 80 60 40 20 Idc1 Idc2 0 20 40 60 80 100 120 140 Ambient Temperature (℃) NRS5020 type 100 80 60 40 20 0 -40 -20 NRS5040 type 0 20 40 60 80 100 120 140 Ambient Temperature (℃) 100 120 0 20 40 60 80 100 120 140 Ambient Temperature (℃) Idc1 Idc2 20 0 -40 -20 NRS5014 type 80 40 120 0 20 40 60 80 100 120 140 Ambient Temperature (℃) 100 20 Ratio to rated current (%) NRS4012 type 80 60 0 -40 -20 0 20 40 60 80 100 120 140 Ambient Temperature (℃) 100 80 120 Ratio to rated current (%) Ratio to rated current (%) Ratio to rated current (%) Idc1 Idc2 20 0 -40 -20 NRS5030 type 80 40 120 0 20 40 60 80 100 120 140 Ambient Temperature (℃) 100 60 0 -40 -20 NRS5012 type 80 80 120 0 20 40 60 80 100 120 140 Ambient Temperature (℃) 100 0 -40 -20 NRS5024 type 80 60 120 0 20 40 60 80 100 120 140 Ambient Temperature (℃) 100 80 NRH3012 type NRH2410 type 100 0 -40 -20 0 20 40 60 80 100 120 140 Ambient Temperature (℃) 100 0 -40 -20 NRS4010 type Idc1 Idc2 20 120 0 20 40 60 80 100 120 140 Ambient Temperature (℃) 100 0 -40 -20 NRS5010 type Idc1 Idc2 20 120 0 20 40 60 80 100 120 140 Ambient Temperature (℃) 100 40 40 Ratio to rated current (%) 80 60 60 Ratio to rated current (%) NRS3015 type 100 80 80 120 Ratio to rated current (%) 120 NRH3010 type 120 100 0 -40 -20 0 20 40 60 80 100 120 140 Ambient Temperature (℃) 100 0 -40 -20 0 20 40 60 80 100 120 140 Ambient Temperature (℃) Idc1 Idc2 20 Ratio to rated current (%) Idc1 Idc2 20 Ratio to rated current (%) 40 40 120 Ratio to rated current (%) 60 0 -40 -20 Ratio to rated current (%) NRH2412 type 80 60 0 -40 -20 0 20 40 60 80 100 120 140 Ambient Temperature (℃) 100 80 NRS2012 type ／ POWER INDUCTORS INDUCTORS Ratio to rated current (%) 120 Ratio to rated current (%) Idc1 Idc2 20 Ratio to rated current (%) 40 100 120 Ratio to rated current (%) 60 NRV2012 type Ratio to rated current (%) 80 120 Ratio to rated current (%) 100 0 -40 -20 Ratio to rated current (%) NRV2010 type Ratio to rated current (%) Ratio to rated current (%) 120 Idc1 Idc2 0 20 40 60 80 100 120 140 Ambient Temperature (℃) NRS6010 type 100 80 60 40 20 0 -40 -20 Idc1 Idc2 0 20 40 60 80 100 120 140 Ambient Temperature (℃) ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 19 53 ■ Derating of Rated Current ●NR series H type/S type/V type Derating of current is necessary for NR-series H type/S type/V type depending on ambient temperature. Please refer to the chart shown below for appropriate derating of current. 20 120 Idc1 Idc2 NRS6045 type ／ POWER INDUCTORS INDUCTORS 80 60 40 20 0 -40 -20 Idc1 Idc2 0 20 40 60 80 100 120 140 Ambient Temperature (℃) 60 40 20 0 -40 -20 0 20 40 60 80 100 120 140 Ambient Temperature (℃) 100 80 120 Idc1 Idc2 NRS8030 type 100 80 60 40 20 0 -40 -20 Idc1 Idc2 0 20 40 60 80 100 120 140 Ambient Temperature (℃) 100 80 60 40 20 0 -40 -20 0 20 40 60 80 100 120 140 Ambient Temperature (℃) NRS6020 type 120 Idc1 Idc2 0 20 40 60 80 100 120 140 Ambient Temperature (℃) 120 Ratio to rated current (%) 40 100 120 Ratio to rated current (%) 60 Ratio to rated current (%) 80 NRS6014 type Ratio to rated current (%) 120 100 0 -40 -20 Ratio to rated current (%) NRS6012 type Ratio to rated current (%) Ratio to rated current (%) 120 NRS6028 type 100 80 60 40 20 0 -40 -20 Idc1 Idc2 0 20 40 60 80 100 120 140 Ambient Temperature (℃) NRS8040 type 100 80 60 40 20 0 -40 -20 Idc1 Idc2 0 20 40 60 80 100 120 140 Ambient Temperature (℃) ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 54 19 SMD POWER INDUCTORS (NR SERIES/NR SERIES H TYPE/M TYPE/S TYPE/V TYPE) ■PACKAGING ①Minimum Quantity Standard Quantity [pcs] Tape ＆ Reel 2500 Type NRV2010 NRS2012 NRV2012 NRH2410 NRH2412 NR 3010 NRH3010 NR 3012 NRH3012 NRV3012 NR 3015 NRS3015 NR 4010 NRS4010 NR 4012 NRS4012 NR 4018 NRS4018 Standard Quantity [pcs] Tape ＆ Reel 1000 1000 1000 800 2500 500 Type NRS5010 NRS5012 NRS5014 NRS5020 NRS5024 NRS5030 NR 5040 NRS5040 NRS6010 NR 6012 NRS6012 NRS6014 NR 6020 NRS6020 NR 6028 NRS6028 NR 6045 NRM6045 NRS6045 NRS8030 NR 8040 NRS8040 2500 2500 2500 2000 2000 2000 5000 4500 3500 1500 1000 1000 1000 2500 2000 1500 1000 1000 ②Tape Material ●Embossed Tape Top tape Chip Filled Sprocket hole Base tape Chip cavity Chip ③Taping dimensions ●Embossed tape 8mm wide (0.315 inches wide) 1.75±0.1 (0.069±0.004） A B T 8.0±0.2 (0.315±0.008) φ1.5＋0.1/－0 (φ0.059＋0.004/-0) 3.5±0.1 (0.138±0.004) Sprocket hole K F 4.0±0.1 (0.157±0.004) 2.0±0.05 (0.079±0.002) Electrode（bottom view） ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_smd_NR_pack_e-E07R01 Chip cavity Type NRV2010 NRS2012 NRV2012 NRH2410 NRH2412 NR 3010 NRH3010 NR 3012 NRH3012 NRV3012 NR 3015 NRS3015 A B 2.2±0.1 （0.102±0.004） 2.6±0.1 （0.087±0.004） Insertion pitch F Tape thickness T K 2.2±0.1 （0.102±0.004） 0.25±0.05 （0.009±0.002） 1.3±0.1 （0.051±0.004） 2.6±0.1 （0.102±0.004） 0.25±0.05 （0.009±0.002） 1.3±0.1 （0.051±0.004） 1.4±0.1 （0.055±0.004） 1.6±0.1 （0.063±0.004） 4.0±0.1 （0.157±0.004） 3.2±0.1 （0.126±0.004） 3.2±0.1 （0.126±0.004） 0.3±0.05 （0.012±0.002） 1.9±0.1 （0.075±0.004） Unit：mm（inch） ●Embossed tape 12mm wide (0.47 inches wide) 1.75±0.1 (0.069±0.004） A B T 12.0±0.3 (0.472±0.012) φ1.5＋0.1/－0 (φ0.059＋0.004/-0) 5.5±0.1 (0.217±0.004) Sprocket hole K F Type NR 4010 NRS4010 NR 4012 NRS4012 NR 4018 NRS4018 2.0±0.1 (0.079±0.004) 4.0±0.1 (0.157±0.004) Electrode（bottom view） Chip cavity A B 4.3±0.1 （0.169±0.004） 4.3±0.1 （0.169±0.004） Insertion pitch F NRS5010 0.3±0.1 （0.012±0.004） NRS5012 NRS5014 Tape thickness T 5.25±0.1 （0.207±0.004） 5.25±0.1 （0.207±0.004） 5.15±0.1 （0.203±0.004） 5.15±0.1 （0.203±0.004） 5.15±0.1 （0.203±0.004） 5.15±0.1 （0.203±0.004） NRS5020 NRS5024 NRS5030 NR 5040 NRS5040 8.0±0.1 （0.315±0.004） NRS6010 NR 6012 NRS6012 0.4±0.1 （0.016±0.004） NRS6014 NR 6020 NRS6020 NR 6028 NRS6028 NR 6045 NRM6045 NRS6045 6.3±0.1 （0.248±0.004） 6.3±0.1 （0.248±0.004） K 1.4±0.1 （0.055±0.004） 1.6±0.1 （0.063±0.004） 2.1±0.1 （0.083±0.004） 1.4±0.1 （0.055±0.004） 1.4±0.1 （0.055±0.004） 1.6±0.1 （0.063±0.004） 2.3±0.1 （0.091±0.004） 2.7±0.1 （0.106±0.004） 3.2±0.1 （0.126±0.004） 4.2±0.1 （0.165±0.004） 1.4±0.1 （0.055±0.004） 1.6±0.1 （0.063±0.004） 1.6±0.1 （0.063±0.004） 2.3±0.1 （0.090±0.004） 3.1±0.1 （0.122±0.004） 4.7±0.1 （0.185±0.004） Unit：mm（inch） ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_smd_NR_pack_e-E07R01 ●Embossed tape 16mm wide (0.63 inches wide) φ1.5±0.1 (φ0.059±0.004） Sprocket hole 1.75±0.1 (0.069±0.004） A B 16.0±0.3 (0.630±0.012) 7.5±0.1 (0.295±0.004) T K F 2.0±0.1 (0.079±0.004) Type NRS8030 NR 8040 NRS8040 4.0±0.1 (0.157±0.004) Electrode（bottom view） A Chip cavity B Insertion pitch F T Tape thickness 8.3±0.1 （0.327±0.004） 8.3±0.1 （0.327±0.004） 12.0±0.1 （0.472±0.004） 0.5±0.1 （0.020±0.004） φD Reel size (Reference values) φd W 180±0.5 （7.087±0.019） 60±1.0 （2.36±0.04） 10.0±1.5 （0.394±0.059） K 3.4±0.1 （0.134±0.004） 4.5±0.1 （0.177±0.004） Unit：mm（inch） ④Leader and Blank portion ●NR, NRH, NRS, NRV ⑤Reel size Type NRV2010 NRS2012 NRV2012 NRH2410 NRH2412 NR 3010 NRH3010 NR 3012 NRH3012 NRV3012 NR 3015 NRS3015 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_smd_NR_pack_e-E07R01 NRS5010 NRS5012 NRS5014 NRS5020 NRS5030 NRS6010 NR 6012 NRS6012 NRS6014 180±3.0 （7.087±0.118） 60±2.0 （2.36±0.08） 14.0±1.5 （0.551±0.059） Unit：mm（inch） Type NR 4010 NRS4010 NR 4012 NRS4012 NR 4018 NRS4018 NRS5024 NR 5040 NRS5040 NR 6020 NRS6020 NR 6028 NRS6028 NR 6045 NRM6045 NRS6045 NRS8030 NR 8040 NRS8040 φD 330±3.0 （12.99±0.118） Reel size (Reference values) φd t（max.） 80±2.0 （3.15±0.078） W 18.5 （0.72） 13.5±1.0 （0.531±0.04） 22.5 （0.89） 17.5±1.0 （0.689±0.04） Unit：mm（inch） ⑥Top Tape Strength The top tape requires a peel-off force of 0.1 to 1.3N in the direction of the arrow as illustrated below. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_smd_NR_pack_e-E07R01 SMD POWER INDUCTORS （NR□ SERIES） ■RELIABILITY DATA 1. Operating Temperature Range Specified Value NRV20/30Type,NRH24/30Type NRS20/30/40/50/60/80Type Test Methods and Remarks Including self-generated heat －40～＋125℃（Including self-generated heat） 2. Storage Temperature Range Specified Value NRV20/30Type,NRH24/30Type NRS20/30/40/50/60/80Type Test Methods and Remarks －5 to 40℃ for the product with taping. －40～＋85℃ 3. Rated current Specified Value NRV20/30Type,NRH24/30Type NRS20/30/40/50/60/80Type Within the specified tolerance NRV20/30Type,NRH24/30Type NRS20/30/40/50/60/80Type Within the specified tolerance 4. Inductance Specified Value Test Methods and Remarks Measuring equipment Measuring frequency : LCR Meter （HP 4285A or equivalent） : 100kHz, 1V 5. DC Resistance Specified Value Test Methods and Remarks NRV20/30Type,NRH24/30Type NRS20/30/40/50/60/80Type Measuring equipment Within the specified tolerance : DC ohmmeter （HIOKI 3227 or equivalent） 6. Self resonance frequency Specified Value Test Methods and Remarks NRV30Type,NRH24/30Type NRS30/40/50/60/80Type Within the specified tolerance NRV20,NRS20 － NRV30,NRH24/30,NRS30/40/50/60/80Type Measuring equipment : Impedance analyzer/material analyzer（HP4291A or equivalent HP4191A, 4192A or equivalent） 7. Temperature characteristic Specified Value NRV20/30Type,NRH24/30Type NRS20/30/40/50/60/80Type Inductance change : Within ±20% NRV20/30, NRH24/30, NRS20/30/40/50/60/80 Type, : Measurement of inductance shall be taken at temperature range within －40℃～＋85℃. With reference to inductance value at ＋20℃., change rate shall be calculated. Test Methods and Remarks Change of maximum inductance deviation in step 1 to 5 Step Temperature（℃） 1 20 2 Minimum operating temperature 3 20 (Standard temperature) 4 Maximum operating temperature 5 20 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . hq_i_smd_NR_reli_e-E06R01 8. Resistance to flexure of substrate Specified Value NRV20/30Type,NRH24/30Type NRS20/30/40/50/60/80Type No damage The test samples shall be soldered to the test board by the reflow. As illustrated below, apply force in the direction of the arrow indicating until deflection of the test board reaches to 2 mm. Test board size : 100×40×1.0 Test board material : glass epoxy-resin Solder cream thickness : 0.10mm ( NRS20/30, NRH24/30, NRV20/30Type) : 0.15mm ( NRS40/50/60/80Type) Test Methods and Remarks Land dimension C A B A Type NRS20, NRV20 NRH24 NRV30,NRH30,NRS30 NRS40 NRS50 NRS60 NRS80 A 0.65 0.7 0.8 1.2 1.5 1.6 1.8 B 0.7 0.75 1.4 1.6 2.1 3.1 3.8 C 2.0 2.0 2.7 3.7 4.0 5.7 7.5 9. Insulation resistance : between wires Specified Value NRV20/30Type,NRH24/30Type NRS20/30/40/50/60/80Type － 10. Insulation resistance : between wire and core Specified Value NRV20/30Type,NRH24/30Type NRS20/30/40/50/60/80Type － 11. Withstanding voltage : between wire and core Specified Value NRV20/30Type,NRH24/30Type NRS20/30/40/50/60/80Type － 12. Adhesion of terminal electrode Specified Value Test Methods and Remarks NRV20/30Type,NRH24/30Type NRS20/30/40/50/60/80Type Shall not come off PC board The test samples shall be soldered to the test board by the reflow. Applied force : 10N to X and Y directions. Duration : 5s. Solder cream thickness : 0.10mm（NRV20/30Tyｐｅ,NRH24/30type,NRS20/30Type） : 0.15mm（NRS40/50/60/80Type） 13. Resistance to vibration Specified Value Test Methods and Remarks NRV20/30Type,NRH24/30Type NRS20/30/40/50/60/80Type Inductance change : Within ±10% No significant abnormality in appearance. The test samples shall be soldered to the test board by the reflow. Then it shall be submitted to below test conditions. Frequency Range 10～55Hz Total Amplitude 1.5mm (May not exceed acceleration 196m/s2) Sweeping Method 10Hz to 55Hz to 10Hz for 1min. X Time Y For 2 hours on each X, Y, and Z axis. Z Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48hrs. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . hq_i_smd_NR_reli_e-E06R01 14. Solderability Specified Value NRV20/30Type,NRH24/30Type NRS20/30/40/50/60/80Type At least 90％ of surface of terminal electrode is covered by new solder. The test samples shall be dipped in flux, and then immersed in molten solder as shown in below table. Flux : Methanol solution containing rosin 25%. Test Methods and Remarks Solder Temperature 245±5℃ Time 5±1.0 sec. ※Immersion depth : All sides of mounting terminal shall be immersed. 15. Resistance to soldering heat Specified Value NRV20/30Type,NRH24/30Type NRS20/30/40/50/60/80Type Inductance change : Within ±10% No significant abnormality in appearance. The test sample shall be exposed to reflow oven at 230±5℃ for 40 seconds, with peak temperature at 260±5℃ for 5 seconds, 2 times. Test Methods and Remarks Test board material Test board thickness : glass epoxy-resin : 1.0mm 16. Thermal shock Specified Value NRV20/30Type,NRH24/30Type NRS20/30/40/50/60/80Type Inductance change : Within ±10% No significant abnormality in appearance. Test Methods and Remarks The test samples shall be soldered to the test board by the reflow. The test samples shall be placed at specified temperature for specified time by step 1 to step 4 as shown in below table in sequence. The temperature cycle shall be repeated 1000 cycles. Conditions of 1 cycle Step Temperature (℃) Duration (min) 1 －40±3 30±3 2 Room temperature Within 3 3 ＋85±2 30±3 4 Room temperature Within 3 17. Damp heat Specified Value Test Methods and Remarks NRV20/30Type,NRH24/30Type NRS20/30/40/50/60/80Type Inductance change : Within ±10% No significant abnormality in appearance. The test samples shall be soldered to the test board by the reflow. The test samples shall be placed in thermostatic oven set at specified temperature and humidity as shown in below table. Temperature 60±2℃ Humidity 90～95%RH Time 1000＋24/－0 hour 18. Loading under damp heat Specified Value Test Methods and Remarks NRV20/30Type,NRH24/30Type NRS20/30/40/50/60/80Type Inductance change : Within ±10% No significant abnormality in appearance. The test samples shall be soldered to the test board by the reflow. The test samples shall be placed in thermostatic oven set at specified temperature and humidity and applied the rated current continuously as shown in below table. Temperature 60±2℃ Humidity 90～95％RH Applied current Rated current Time 1000＋24/－0 hour 19. Low temperature life test Specified Value NRV20/30Type,NRH24/30Type NRS20/30/40/50/60/80Type Inductance change : Within ±10% No significant abnormality in appearance. Test Methods and Remarks The test samples shall be soldered to the test board by the reflow. After that, the test samples shall be placed at test conditions as shown in below table. Temperature －40±2℃ Time 1000＋24/－0 hour ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . hq_i_smd_NR_reli_e-E06R01 20. High temperature life test Specified Value NRV20/30Type,NRH24/30Type NRS20/30/40/50/60/80Type － 21. Loading at high temperature life test Specified Value Test Methods and Remarks NRV20/30Type,NRH24/30Type NRS20/30/40/50/60/80Type Inductance change : Within ±10% No significant abnormality in appearance. The test samples shall be soldered to the test board by the reflow soldering. Temperature 85±2℃ Applied current Rated current Time 1000＋24/－0 hour 22. Standard condition Specified Value NRV20/30Type,NRH24/30Type NRS20/30/40/50/60/80Type Standard test condition : Unless otherwise specified, temperature is 20±15℃ and 65±20％of relative humidity. When there is any question concerning measurement result: In order to provide correlation data, the test shall be condition of 20±2℃ of temperature, 65±5% relative humidity. Inductance is in accordance with our measured value. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . hq_i_smd_NR_reli_e-E06R01 SMD POWER INDUCTORS （NR, NS, ES SERIES） ■PRECAUTIONS 1. Circuit Design Precautions ◆Operating environment 1. The products listed in this catalogue are intended for use in general electronic equipment (e.g., AV equipment, OA equipment, home electric appliances, office equipment, information and communication equipment), general medical equipment, industrial equipment, and automotive interior applications, etc. Please be sure to contact TAIYO YUDEN for further information before using the products for any equipment which may directly cause loss of human life or bodily injury (e.g., specially controlled medical equipment, transportation equipment including, without limitation, automotive powertrain control system, train control system, and ship control system, traffic signal equipment). Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g., aerospace equipment, aviation equipment, nuclear control equipment, undersea equipment, military equipment, etc.). 2. PCB Design Precautions ◆Land pattern design 1. Please refer to a recommended land pattern. 2. There is stress, which has been caused by distortion of a PCB, to the inductor. (NRV20/30, NRH24/30, NRS20/30/40/50/60/80, NRM60 Type) 3. Please consider the arrangement of parts on a PCB. (NRV20/30, NRH24/30, NRS20/30/40/50/60/80, NRM60 Type) ◆Land pattern design Surface Mounting 1. Mounting and soldering conditions should be checked beforehand. 2. Applicable soldering process to this products is reflow soldering only. 3. Please use the recommended land pattern shown as below. Electrical characteristics and the mounting ability of the product are being considered in the recommended land pattern. If a PCB is designed with other dimensions, defective soldering and stress to a product may occur due to misalignment. The performance of the product may not be brought out. If an adopted land pattern is different from the recommended land pattern, stress to the product will increase. It may cause cracks or defective electrical characteristics of the product. Please conduct validation completely before studying adoption of this product and please judge the pros and cons of adoption of this product with taking on responsibility. (NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/30/40/50/60/80, NRM60 Type) 4. As coefficients of thermal expansion between an inductor and a PCB differs, cracks may occur on a ferrite core when thermal stress is applied to them after mounting an inductor. (Please refer to the drawings below.) Please conduct validation completely before studying adoption of this product and please judge the pros and cons of adoption of this product with taking on responsibility. (NRV20/30, NRH24/30, NRS20/30/40/50/60/80, NRM60 Type) Clack on ferrite core Technical considerations Solder, electrode PCB 5. SMD inductors should be located to minimize any possible mechanical stresses from board warp or deflection. When splitting the PC board after mounting inductors and other components, care is required so as not to give any stresses of deflection or twisting to the board. ( NRV20/30, NRH24/30, NRS20/30/40/50/60/80, NRM60 Type) A product tends to undergo stress in order “A>C>B≡D”. Please consider the layouts of a product to minimize any stresses. Electrode A Perforation Slit D B C ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) hq_i_smd_NR_NS_EST_prec_e-E07R01 3. Considerations for automatic placement Precautions ◆Adjustment of mounting machine 1. Excessive impact load should not be imposed on the products when mounting onto the PC boards. 2. Mounting and soldering conditions should be checked beforehand. ◆Adjustment of mounting machine 1. When installing products, care should be taken not to apply distortion stress as it may deform the products. 2. Stress may be applied to a product with a warp or a twist in handling of the product. Please conduct validation completely before studying adoption of this product and please judge the pros and cons of adoption of this product with taking on responsibility. (NRV20/30, NRH24/30, NRS20/30/40/50/60/80, NRM60 Type) Technical considerations ＜Wrap＞ ＜Twist＞ 4. Soldering Peak：250＋5/－0℃ 150～180 200 100 90±30sec 30±10sec 230℃ min 0 Temperature［℃］ Technical considerations ◆Reflow soldering 1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently degrade the reliability of the products. ・ NRV20/30, NRH24/30, NRS20/30/40/50/60/80, NRM60 Type, NS101/125 Type, EST0645/1040/1060 Type Recommended reflow condition (Pb free solder) NR, NS Series ES Series 5sec max 5sec max 300 300 Temperature［℃］ Precautions ◆Reflow soldering 1. Please contact any of our offices for a reflow soldering, and refer to the recommended condition specified. 2. The product shall be used reflow soldering only. 3. Please do not add any stress to a product until it returns in normal temperature after reflow soldering. ◆Lead free soldering 1. When using products with lead free soldering, we request to use them after confirming adhesion, temperature of resistance to soldering heat, soldering etc sufficiently. ◆Recommended conditions for using a soldering iron ・ Put the soldering iron on the land-pattern. ・ Soldering iron's temperature - Below 350℃ ・ Duration - 3 seconds or less ・ The soldering iron should not directly touch the inductor. Peak：245℃ 150～180 200 100 90±30sec 30±10sec 230℃ min 0 Heating Time［sec］ Heating Time［sec］ 5. Cleaning Precautions Technical considerations ◆Cleaning conditions 1. Washing by supersonic waves shall be avoided. ◆Cleaning conditions 1. If washed by supersonic waves, the products might be broken. 6. Handling ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) hq_i_smd_NR_NS_EST_prec_e-E07R01 Precautions Technical considerations ◆Handling 1. Keep the product away from all magnets and magnetic objects. ◆Breakaway PC boards (splitting along perforations) 1. When splitting the PC board after mounting product, care should be taken not to give any stresses of deflection or twisting to the board. 2. Board separation should not be done manually, but by using the appropriate devices. ◆Mechanical considerations 1. Please do not give the product any excessive mechanical shocks. 2. Please do not add any shock and power to a product in transportation. ◆Pick-up pressure 1. Please do not push to add any pressure to a winding part. Please do not give any shock and push into a ferrite core exposure part. ◆Packing 1. Please avoid accumulation of a packing box as much as possible. ◆Handling 1. There is a case that a characteristic varies with magnetic influence. ◆Breakaway PC boards (splitting along perforations) 1. The position of the product on PCBs shall be carefully considered to minimize the stress caused from splitting of the PCBs. ◆Mechanical considerations 1. There is a case to be damaged by a mechanical shock. 2. There is a case to be broken by the handling in transportation. ◆Pick-up pressure 1. Damage and a characteristic can vary with an excessive shock or stress. ◆Packing 1. If packing boxes are accumulated, that could cause a deformation on packing tapes or a damage on the products. 7. Storage conditions Precautions ◆Storage 1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should be controlled. ・ Recommended conditions Ambient temperature : －5～40℃ Humidity : Below 70% RH ・ The ambient temperature must be kept below 30℃. Even under ideal storage conditions, solderability of products electrodes may decrease as time passes. For this reason, product should be used within 6 months from the time of delivery. In case of storage over 6 months, solderability shall be checked before actual usage. Technical considerations ◆Storage 1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes and deterioration of taping/packaging materials may take place. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) hq_i_smd_NR_NS_EST_prec_e-E07R01