for General Electronic Equipment
Notice for TAIYO YUDEN products
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product Information in this Catalog
Product information in this catalog is as of October
2020. All
All of
of the
the
January 2021.
contents specified herein and production status of the products listed in
this catalog are subject to change without notice due to technical
improvement of our products, etc. Therefore, please check for the latest
information carefully before practical application or use of our products.
(4) Powe r g e n e r atio n c o ntro l e quip m e nt (nu c le a r p owe r,
hydroelectric power, thermal power plant control system, etc.)
(5) Undersea equipment (submarine repeating equipment,
underwater work equipment, etc.)
(6) Military equipment
(7) Any other equipment requiring extremely high levels of safety
and/or reliability equal to the equipment listed above
Please note that TAIYO YUDEN shall not be in any way responsible
for any damages and defects in products or equipment incorporating
our products, which are caused under the conditions other than those
specified in this catalog or individual product specification sheets.
*Notes:
1. There is a possibility that our products can be used only
for aviation equipment that does not directly affect the safe
operation of aircraft (e.g., in-flight entertainment, cabin
light, electric seat, cooking equipment) if such use meets
requirements specified separately by TAIYO YUDEN. Please
be sure to contact TAIYO YUDEN for further information
before using our products for such aviation equipment.
2. Implantable medical devices contain not only internal unit
which is implanted in a body, but also external unit which is
connected to the internal unit.
■ Approval of Product Specifications
Ple a se c ont ac t TA IYO YUD EN for fur the r det a ils of p ro duc t
specifications as the individual product specification sheets are
available. When using our products, please be sure to approve our
product specifications or make a written agreement on the product
specification with TAIYO YUDEN in advance.
■ Pre-Evaluation in the Actual Equipment and Conditions
Please conduct validation and verification of our products in actual
conditions of mounting and operating environment before using our
products.
■ Limited Application
1. Equipment Intended for Use
The products listed in this catalog are intended for generalpurpose and standard use in general electronic equipment (e.g.,
AV equipment, OA equipment, home electric appliances, office
equipment, information and communication equipment including,
without limitation, mobile phone, and PC) and other equipment
specified in this catalog or the individual product specification sheets.
TAIYO YUDEN has the line-up of the products intended for
use in automotive electronic equipment, telecommunications
infrastructure and industrial equipment, or medical devices
classified as GHTF Classes A to C (Japan Classes I to III).
Therefore, when using our products for these equipment,
please check available applications specified in this catalog
or the individual product specification sheets and use the
corresponding products.
2. Equipment Requiring Inquiry
Please be sure to contact TAIYO YUDEN for further information
before using the products listed in this catalog for the following
equipment (excluding intended equipment as specified in this
catalog or the individual product specification sheets) which may
cause loss of human life, bodily injury, serious property damage
and/or serious public impact due to a failure or defect of the
products and/or malfunction attributed thereto.
(1) Transportation equipment (automotive powertrain control
system, train control system, and ship control system, etc.)
(2) Traffic signal equipment
(3) Disaster prevention equipment, crime prevention equipment
(4) Medical devices classified as GHTF Class C (Japan Class III)
(5) H i g h l y p u b l i c i n f o r m a t i o n n e t wo r k e q u i p m e n t , d a t a processing equipment (telephone exchange, and base
station, etc.)
(6) Any other equipment requiring high levels of quality and/or
reliability equal to the equipment listed above
3. Equipment Prohibited for Use
Please do not incorporate our products into the following
equipment requiring extremely high levels of safety and/or
reliability.
(1) Aerospace equipment (artificial satellite, rocket, etc.)
(2) Aviation equipment *1
(3) Medical devices classified as GHTF Class D (Japan Class IV),
implantable medical devices *2
4. Limitation of Liability
Please note that unless you obtain prior written consent of TAIYO
YUDEN, TAIYO YUDEN shall not be in any way responsible for
any damages incurred by you or third parties arising from use of
the products listed in this catalog for any equipment that is not
intended for use by TAIYO YUDEN, or any equipment requiring
inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN
as described above.
■ Safety Design
When using our products for high safety and/or reliability-required
equipment or circuits, please fully perform safety and/or reliability
evaluation. In addition, please install (i) systems equipped with
a protection circuit and a protection device and/or (ii) systems
equipped with a redundant circuit or other system to prevent an
unsafe status in the event of a single fault for a failsafe design to
ensure safety.
■ Intellectual Property Rights
Information contained in this catalog is intended to convey examples
of typical performances and/or applications of our products and is
not intended to make any warranty with respect to the intellectual
property rights or any other related rights of TAIYO YUDEN or any
third parties nor grant any license under such rights.
■ Limited Warranty
Please note that the scope of warranty for our products is limited to
the delivered our products themselves and TAIYO YUDEN shall not
be in any way responsible for any damages resulting from a failure
or defect in our products. Notwithstanding the foregoing, if there is
a written agreement (e.g., supply and purchase agreement, quality
assurance agreement) signed by TAIYO YUDEN and your company,
TAIYO YUDEN will warrant our products in accordance with such
agreement.
■ TAIYO YUDEN’s Official Sales Channel
The contents of this catalog are applicable to our products which are
purchased from our sales offices or authorized distributors (hereinafter
“TAIYO YUDEN’
s official sales channel”). Please note that the contents
of this catalog are not applicable to our products purchased from any
seller other than TAIYO YUDEN’
s official sales channel.
■ Caution for Export
Some of our products listed in this catalog may require specific
procedures for export according to“U.S. Export Administration
Regulations”,“Foreign Exchange and Foreign Trade Control Law”
of Japan, and other applicable regulations. Should you have any
questions on this matter, please contact our sales staff.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
2
21
for General Electronic Equipment
SMD POWER INDUCTORS（NR SERIES/NR SERIES H TYPE/S TYPE/V TYPE）
SMD POWER INDUCTORS（NR SERIES/NR SERIES H TYPE/S TYPE/V TYPE）
REFLOW
■PARTS NUMBER
N
R △
①
4
* Operating Temp.：-25～+120℃（NRS40/50/60/80：-25～+125℃）（Including self-generated heat）
0
1
②
1
0 0
④
Series name
Coating resin specification
Dimensions（L×W×H）［mm］
2.0×2.0×1.0
2.0×2.0×1.2
2.4×2.4×1.0
2.4×2.4×1.2
3.0×3.0×1.0
3.0×3.0×1.2
3.0×3.0×1.5
4.0×4.0×1.0
4.0×4.0×1.2
4.0×4.0×1.8
4.9×4.9×1.0
4.9×4.9×1.2
4.9×4.9×1.4
4.9×4.9×2.0
4.9×4.9×2.4
4.9×4.9×3.0
4.9×4.9×4.0
6.0×6.0×1.0
6.0×6.0×1.2
6.0×6.0×1.4
6.0×6.0×2.0
6.0×6.0×2.8
6.0×6.0×4.5
8.0×8.0×3.0
8.0×8.0×4.0
M △
⑤ ⑥
△＝Blank space
③Packaging
Code
T△
Packaging
Taping
④Nominal inductance
Code
（example）
2R2
100
101
※R＝Decimal point
⑤Inductance tolerance
Code
M
N
Nominal inductance［μH］
2.2
10
100
POWER INDUCTORS
②Dimensions（L×W×H）
Code
2010
2012
2410
2412
3010
3012
3015
4010
4012
4018
5010
5012
5014
5020
5024
5030
5040
6010
6012
6014
6020
6028
6045
8030
8040
T △
③
INDUCTORS
①Series name
Code
NR△
NRH
NRS
NRV
8
Inductance tolerance
±20％
±30％
⑥Internal code
i_smd_NR_e-E08R01.doc
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
21
51
for General Electronic Equipment
■STANDARD EXTERNAL DIMENSIONS / STANDARD QUANTITY
L
Recommended Land Patterns
B
Type
NRV2010
NRS2012, NRV2012
e
NRH2410
C
NRH2412
NR 3010, NRH3010
NR 3012, NRH3012, NRV3012
e
A
A
NR 3015, NRS3015
NR 4010, NRS4010
NR 4012, NRS4012
NR 4018, NRS4018
NRS8030
NR 8040, NRS8040
H
W
f
INDUCTORS
A
B
C
0.65
1.35
2.0
0.7
1.45
2.0
0.8
2.2
2.7
1.2
2.8
3.7
1.8
5.6
7.5
Unit：mm
Type
POWER INDUCTORS
NRV2010
NRS2012
NRV2012
NRH2410
NRH2412
NR 3010
NRH3010
NR 3012
NRH3012
NRV3012
NR 3015
NRS3015
NR 4010
NRS4010
NR 4012
NRS4012
NR 4018
NRS4018
NRS8030
NR 8040
NRS8040
L
W
H
e
f
2.0±0.1
（0.079±0.004）
2.0±0.1
（0.079±0.004）
2.4±0.1
（0.095±0.004）
2.4±0.1
（0.095±0.004）
3.0±0.1
（0.118±0.004）
2.0±0.1
（0.079±0.004）
2.0±0.1
（0.079±0.004）
2.4±0.1
（0.095±0.004）
2.4±0.1
（0.095±0.004）
3.0±0.1
（0.118±0.004）
1.0 max
（0.039 max）
1.2 max
（0.047 max）
1.0 max
（0.039 max）
1.2 max
（0.047 max）
1.0 max
（0.039 max）
0.5±0.2
（0.020±0.008）
0.5±0.2
（0.020±0.008）
0.6±0.2
（0.024±0.008）
0.6±0.2
（0.024±0.008）
0.9±0.2
（0.035±0.008）
1.25±0.2
（0.050±0.008）
1.25±0.2
（0.050±0.008）
1.45±0.2
（0.057±0.008）
1.45±0.2
（0.057±0.008）
1.9±0.2
（0.075±0.008）
3.0±0.1
（0.118±0.004）
3.0±0.1
（0.118±0.004）
1.2 max
（0.047 max）
0.9±0.2
（0.035±0.008）
1.9±0.2
（0.075±0.008）
3.0±0.1
（0.118±0.004）
4.0±0.2
（0.158±0.008）
4.0±0.2
（0.158±0.008）
4.0±0.2
（0.158±0.008）
8.0±0.2
（0.315±0.008）
3.0±0.1
（0.118±0.004）
4.0±0.2
（0.158±0.008）
4.0±0.2
（0.158±0.008）
4.0±0.2
（0.158±0.008）
8.0±0.2
（0.315±0.008）
0.9±0.2
（0.035±0.008）
1.1±0.2
（0.043±0.008）
1.1±0.2
（0.043±0.008）
1.1±0.2
（0.043±0.008）
1.60±0.3
（0.063±0.012）
1.9±0.2
（0.075±0.008）
2.5±0.2
（0.098±0.008）
2.5±0.2
（0.098±0.008）
2.5±0.2
（0.098±0.008）
5.6±0.3
（0.22±0.012）
8.0±0.2
（0.315±0.008）
8.0±0.2
（0.315±0.008）
1.5 max
（0.059 max）
1.0 max
（0.039 max）
1.2 max
（0.047 max）
1.8 max
（0.071 max）
3.0 max
（0.118 max）
*1） 4.2 max
（0.165 max）
*2） 4.0 max
（0.158 max）
1.60±0.3
（0.063±0.012）
5.6±0.3
（0.22±0.012）
*1）0R9～6R8 type,
*2）100～221 type
Standard quantity
［pcs］ Taping
2500
2500
2500
2500
2000
2000
2000
5000
4500
3500
1000
1000
Unit：mm（inch）
i_smd_NR_e-E08R01.doc
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
52
21
for General Electronic Equipment
L
∆I
H
e
W
f
e
A
B
C
1.5
3.6
4.0
1.6
4.7
5.7
Unit：mm
Type
W
4.9±0.2
（0.193±0.008）
4.9±0.2
（0.193±0.008）
4.9±0.2
（0.193±0.008）
4.9±0.2
（0.193±0.008）
4.9±0.2
（0.193±0.008）
4.9±0.2
（0.193±0.008）
4.9±0.2
（0.193±0.008）
4.9±0.2
（0.193±0.008）
NRS5024
4.9±0.2
（0.193±0.008）
4.9±0.2
（0.193±0.008）
NRS5030
4.9±0.2
（0.193±0.008）
4.9±0.2
（0.193±0.008）
NR 5040
NRS5040
4.9±0.2
（0.193±0.008）
4.9±0.2
（0.193±0.008）
NRS5010
NRS5012
NRS5014
NRS5020
6.0±0.2
6.0±0.2
（0.236±0.008） （0.236±0.008）
NR 6012
6.0±0.2
6.0±0.2
NRS6012
（0.236±0.008） （0.236±0.008）
6.0±0.2
6.0±0.2
NRS6014
（0.236±0.008） （0.236±0.008）
NR 6020
6.0±0.2
6.0±0.2
NRS6020
（0.236±0.008） （0.236±0.008）
NR 6028
6.0±0.2
6.0±0.2
NRS6028
（0.236±0.008） （0.236±0.008）
NR 6045
6.0±0.2
6.0±0.2
NRS6045
（0.236±0.008） （0.236±0.008）
*3）1R0～1R5 type,
*4）2R2～330 type
*5）R47～100 type,
*6）150～470 type
*7）1R5～100 type,
*8）150～470 type
NRS6010
H
1.0 max
（0.039 max）
1.2 max
（0.047 max）
1.4 max
（0.055 max）
2.0 max
（0.079 max）
*3） 2.5 max
（0.098 max）
*4） 2.4 max
（0.095 max）
*5） 3.1 max
（0.122 max）
*6） 3.0 max
（0.118 max）
*7） 4.1 max
（0.161 max）
*8） 4.0 max
（0.158 max）
1.0 max
（0.039 max）
1.2 max
（0.047 max）
1.4 max
（0.055 max）
2.0 max
（0.079 max）
2.8 max
（0.110 max）
4.5 max
（0.177 max）
Standard quantity
［pcs］ Taping
e
f
ΔI
1.2±0.2
（0.047±0.008）
1.2±0.2
（0.047±0.008）
1.2±0.2
（0.047±0.008）
1.2±0.2
（0.047±0.008）
3.3±0.2
（0.130±0.008）
3.3±0.2
（0.130±0.008）
3.3±0.2
（0.130±0.008）
3.3±0.2
（0.130±0.008）
1.3typ
（0.051typ）
1.3typ
（0.051typ）
1.3typ
（0.051typ）
1.3typ
（0.051typ）
1.2±0.2
（0.047±0.008）
3.3±0.2
（0.130±0.008）
1.3typ
（0.051typ）
2500
1.2±0.2
（0.047±0.008）
3.3±0.2
（0.130±0.008）
1.3typ
（0.051typ）
500
1.2±0.2
（0.047±0.008）
3.3±0.2
（0.130±0.008）
1.3typ
（0.051typ）
1500
1.35±0.2
（0.053±0.008）
1.35±0.2
（0.053±0.008）
1.35±0.2
（0.053±0.008）
1.35±0.2
（0.053±0.008）
1.35±0.2
（0.053±0.008）
1.35±0.2
（0.053±0.008）
4.0±0.2
（0.158±0.008）
4.0±0.2
（0.158±0.008）
4.0±0.2
（0.158±0.008）
4.0±0.2
（0.158±0.008）
4.0±0.2
（0.158±0.008）
4.0±0.2
（0.158±0.008）
2.3typ
（0.091typ）
2.3typ
（0.091typ）
2.3typ
（0.091typ）
2.3typ
（0.091typ）
2.3typ
（0.091typ）
2.3typ
（0.091typ）
1000
1000
1000
800
POWER INDUCTORS
L
INDUCTORS
Recommended Land Patterns
B
Type
NRS5010
NRS5012
NRS5014
C
NRS5020
NRS5024
NRS5030
A
A
NR 5040, NRS5040
NRS6010
NR 6012, NRS6012
NRS6014
NR 6020, NRS6020
NR 6028, NRS6028
NR 6045, NRS6045
1000
1000
1000
2500
2000
1500
Unit：mm（inch）
i_smd_NR_e-E08R01.doc
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
21
53
for General Electronic Equipment
■PARTS NUMBER
●NRS2012 Shielded type
Parts number
NRS2012T
NRS2012T
NRS2012T
NRS2012T
NRS2012T
1R0N GJ
1R5N GJ
2R2M GJ
3R3M GJ
4R7M GJ
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
1.0
1.5
2.2
3.3
4.7
±30％
±30％
±20％
±20％
±20％
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±20％）
－
－
－
－
－
0.070
0.090
0.107
0.190
0.241
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±20％）
－
－
－
－
－
－
－
0.052
0.060
0.080
0.100
0.175
0.250
0.320
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±20％）
－
－
－
－
－
0.073
0.100
0.129
0.227
0.325
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±20％）
120
106
94
77
56
50
43
32
27
22
0.060
0.070
0.110
0.150
0.220
0.290
0.410
0.690
1.02
1.47
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±20％）
180
101
89
72
56
45
34
29
0.050
0.077
0.100
0.140
0.225
0.300
0.420
0.600
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±20％）
120
99
86
64
50
44
34
25
22
20
17
0.065
0.075
0.083
0.130
0.170
0.250
0.350
0.550
0.770
1.250
2.050
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Typ.
Max.
Typ.
1,900
2,050
1,700
1,850
100
1,650
1,800
1,500
1,650
100
1,350
1,500
1,370
1,500
100
1,000
1,150
1,020
1,100
100
900
1,050
910
1,000
100
●NRV2010 type
Parts number
INDUCTORS
NRV2010T
NRV2010T
NRV2010T
NRV2010T
NRV2010T
NRV2010T
NRV2010T
R47N GF
R68N GF
1R0N GF
1R5M GF
2R2M GF
3R3M GF
4R7M GF
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
0.47
0.68
1.0
1.5
2.2
3.3
4.7
±30％
±30％
±30％
±20％
±20％
±20％
±20％
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Typ.
Max.
Typ.
2,100
2,250
2,000
2,300
100
1,850
2,000
1,850
2,100
100
1,550
1,700
1,600
1,850
100
1,350
1,450
1,450
1,650
100
1,100
1,200
1,100
1,200
100
880
950
1,000
1,100
100
760
810
820
930
100
POWER INDUCTORS
●NRV2012 type
Parts number
NRV2012T
NRV2012T
NRV2012T
NRV2012T
NRV2012T
1R0N GF
1R5N GF
2R2M GF
3R3M GF
4R7M GF
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
1.0
1.5
2.2
3.3
4.7
±30％
±30％
±20％
±20％
±20％
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Typ.
Max.
Typ.
2,200
2,350
1,650
1,830
100
1,800
1,950
1,400
1,550
100
1,600
1,700
1,200
1,350
100
1,250
1,350
900
1,040
100
1,100
1,150
750
850
100
●NRH2410 Shielded type
Parts number
NRH2410T
NRH2410T
NRH2410T
NRH2410T
NRH2410T
NRH2410T
NRH2410T
NRH2410T
NRH2410T
NRH2410T
R68NN 4
1R0NN 4
1R5MN
2R2MN
3R3MN
4R7MN
6R8MN
100MN
150MN
220MN
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
0.68
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Typ.
Max.
Typ.
2,200
2,300
1,570
1,810
100
1,800
1,950
1,410
1,640
100
1,550
1,640
1,160
1,320
100
1,290
1,340
970
1,110
100
1,000
1,140
770
890
100
880
930
670
780
100
750
765
570
650
100
550
605
450
520
100
470
520
370
430
100
390
405
300
340
100
●NRH2412 Shielded type
Parts number
NRH2412T
NRH2412T
NRH2412T
NRH2412T
NRH2412T
NRH2412T
NRH2412T
NRH2412T
R47NNGJ
1R0NNGH
1R5NNGH
2R2MNGH
3R3MNGH
4R7MNGH
6R8MNGH
100MNGH
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
0.47
1.0
1.5
2.2
3.3
4.7
6.8
10
±30％
±30％
±30％
±20％
±20％
±20％
±20％
±20％
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2 frequency［kHz］
Max.
Typ.
Max.
Typ.
2,900
3,690
2,100
2,300
100
2,350
2,610
1,300
1,540
100
2,100
2,290
1,150
1,390
100
1,700
1,940
1,000
1,190
100
1,400
1,600
750
890
100
1,150
1,280
650
770
100
950
1,100
550
635
100
810
900
450
510
100
●NRH3010 Shielded type
Parts number
NRH3010T
NRH3010T
NRH3010T
NRH3010T
NRH3010T
NRH3010T
NRH3010T
NRH3010T
NRH3010T
NRH3010T
NRH3010T
1R2NN
1R5NN
2R2MN
3R3MN
4R7MN
6R8MN
100MN
150MN
220MN
330MN
470MN
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
1.2
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Typ.
Max.
Typ.
1,700
1,740
1,480
1,850
100
1,440
1,500
1,370
1,680
100
1,300
1,400
1,300
1,550
100
1,000
1,020
1,030
1,220
100
850
930
900
1,090
100
700
750
745
920
100
600
650
620
780
100
450
520
480
600
100
380
440
410
510
100
290
360
350
440
100
250
300
285
320
100
※） The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※） The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※） The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
i_smd_NR_e-E08R01.xls
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
54
21
for General Electronic Equipment
■PARTS NUMBER
●NRH3012 Shielded type
Parts number
R47NN
1R0NN
1R5NN
2R2MN
3R3MN
4R7MN
6R8MN
100MN
150MN
220MN
330MN
470MN
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
0.47
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
±30％
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
DC Resistance
［Ω］（±20％）
160
111
95
78
61
50
43
32
26
22
18
16
0.033
0.048
0.055
0.075
0.100
0.130
0.190
0.270
0.450
0.630
0.960
1.340
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±20％）
110
92
70
55
48
40
32
0.065
0.075
0.120
0.150
0.190
0.300
0.470
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±20％）
100
87
64
49
40
36
28
23
20
18
17
0.030
0.038
0.058
0.078
0.120
0.160
0.220
0.325
0.520
0.780
1.100
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±20％）
116
73
58
47
38
31
24
19
15
13
0.056
0.085
0.100
0.140
0.200
0.300
0.430
0.570
0.900
1.250
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±20％）
100
90
70
60
45
35
30
24
18
15
12
0.042
0.051
0.060
0.070
0.095
0.125
0.170
0.260
0.400
0.600
0.770
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Typ.
Max.
Typ.
2,600
3,200
1,900
2,280
100
2,200
2,500
1,710
1,970
100
1,700
1,900
1,600
1,750
100
1,500
1,750
1,370
1,600
100
1,200
1,500
1,210
1,480
100
1,000
1,200
1,060
1,280
100
850
910
890
1,000
100
730
780
720
850
100
530
650
570
680
100
500
550
500
590
100
360
430
450
510
100
280
380
380
430
100
●NRV3012 Shielded type
Parts number
NRV3012T
NRV3012T
NRV3012T
NRV3012T
NRV3012T
NRV3012T
NRV3012T
1R0N
1R5N
2R2M
3R3M
4R7M
6R8M
100M
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
1.0
1.5
2.2
3.3
4.7
6.8
10
±30％
±30％
±20％
±20％
±20％
±20％
±20％
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Typ.
Max.
Typ.
2,500
3,000
1,600
1,970
100
2,100
2,500
1,400
1,610
100
1,800
2,100
1,100
1,330
100
1,600
1,900
1,000
1,260
100
1,250
1,500
850
1,040
100
950
1,200
650
800
100
800
990
550
640
100
●NRS3015 Shielded type
Parts number
NRS3015T
NRS3015T
NRS3015T
NRS3015T
NRS3015T
NRS3015T
NRS3015T
NRS3015T
NRS3015T
NRS3015T
NRS3015T
1R0NNGH
1R5NNGH
2R2MNGH
3R3MNGH
4R7MNGH
6R8MNGH
100MNGH
150MNGH
220MNGH
330MNGH
470MNGH
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Typ.
Max.
Typ.
2,100
2,400
2,100
2,350
100
1,800
2,100
1,820
2,100
100
1,480
1,700
1,500
1,800
100
1,210
1,400
1,230
1,500
100
1,020
1,100
1,040
1,300
100
870
920
880
1,100
100
700
750
710
840
100
580
680
680
760
100
470
540
470
530
100
400
440
440
490
100
325
380
350
380
100
POWER INDUCTORS
Self-resonant
frequency
［MHｚ］（min.）
INDUCTORS
NRH3012T
NRH3012T
NRH3012T
NRH3012T
NRH3012T
NRH3012T
NRH3012T
NRH3012T
NRH3012T
NRH3012T
NRH3012T
NRH3012T
EHS
●NRS4010 Shielded type
Parts number
NRS4010T
NRS4010T
NRS4010T
NRS4010T
NRS4010T
NRS4010T
NRS4010T
NRS4010T
NRS4010T
NRS4010T
1R0NDGG
2R2MDGG
3R3MDGG
4R7MDGG
6R8MDGG
100MDGG
150MDGG
220MDGG
330MDGG
470MDGG
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
1.0
2.2
3.3
4.7
6.8
10
15
22
33
47
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Typ.
Max.
Typ.
2,000
2,280
1,900
2,390
100
1,200
1,610
1,500
1,800
100
1,100
1,300
1,400
1,700
100
950
1,100
1,200
1,450
100
800
890
1,000
1,200
100
620
760
750
860
100
540
635
600
700
100
450
540
500
600
100
350
440
400
460
100
300
350
350
370
100
●NRS4012 Shielded type
Parts number
NRS4012T
NRS4012T
NRS4012T
NRS4012T
NRS4012T
NRS4012T
NRS4012T
NRS4012T
NRS4012T
NRS4012T
NRS4012T
1R0NDGG
1R5NDGG
2R2MDGJ
3R3MDGJ
4R7MDGJ
6R8MDGJ
100MDGJ
150MDGJ
220MDGJ
330MDGJ
470MDGJ
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Typ.
Max.
Typ.
2,800
2,900
2,200
2,670
100
2,300
2,500
2,000
2,430
100
1,650
1,950
1,900
2,100
100
1,400
1,700
1,700
1,880
100
1,200
1,320
1,500
1,570
100
900
1,170
1,300
1,400
100
800
990
1,100
1,200
100
650
820
750
840
100
500
620
620
650
100
400
500
480
530
100
350
430
420
470
100
※） The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※） The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※） The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
i_smd_NR_e-E08R01.xls
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
21
55
for General Electronic Equipment
■PARTS NUMBER
●NRS4018 Shielded type
Parts number
INDUCTORS
NRS4018T
NRS4018T
NRS4018T
NRS4018T
NRS4018T
NRS4018T
NRS4018T
NRS4018T
NRS4018T
NRS4018T
NRS4018T
NRS4018T
NRS4018T
NRS4018T
NRS4018T
1R0NDGJ
1R5NDGJ
2R2MDGJ
3R3MDGJ
4R7MDGJ
6R8MDGJ
100MDGJ
150MDGJ
220MDGJ
330MDGJ
470MDGJ
680MDGJ
101MDGJ
151MDGJ
221MDGJ
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±20％）
90
75
60
45
35
30
25
18
15
12
10
8.3
6.5
5.5
4.0
0.027
0.037
0.042
0.055
0.070
0.098
0.150
0.210
0.290
0.460
0.650
1.00
1.45
2.30
3.80
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±20％）
95
65
42
37
33
23
19
15
0.070
0.105
0.125
0.145
0.185
0.250
0.400
0.600
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±20％）
100
86
70
48
40
36
26
22
0.053
0.070
0.085
0.160
0.180
0.260
0.420
0.670
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±20％）
185
86
56
48
41
33
27
20
16
0.025
0.045
0.065
0.080
0.100
0.150
0.200
0.320
0.450
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±20％）
230
81
68
57
46
37
30
24
20
17
12
7
0.012
0.021
0.026
0.035
0.048
0.060
0.090
0.120
0.165
0.260
0.435
0.850
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Typ.
Max.
Typ.
4,000
4,590
3,200
3,720
100
3,300
3,750
2,400
3,000
100
3,000
3,110
2,200
2,590
100
2,300
2,560
2,000
2,240
100
2,000
2,330
1,700
1,880
100
1,600
1,820
1,450
1,690
100
1,300
1,440
1,200
1,250
100
1,100
1,150
850
915
100
900
920
720
810
100
700
830
550
630
100
600
700
440
520
100
520
600
320
400
100
420
490
280
330
100
340
390
220
280
100
275
310
170
210
100
●NRS5010 type
POWER INDUCTORS
Parts number
NRS5010T
NRS5010T
NRS5010T
NRS5010T
NRS5010T
NRS5010T
NRS5010T
NRS5010T
1R0NMGF
2R2NMGF
3R3MMGF
4R7MMGF
6R8MMGF
100MMGF
150MMGF
220MMGF
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
1.0
2.2
3.3
4.7
6.8
10
15
22
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Typ.
Max.
Typ.
2,350
2,510
1,750
2,000
100
1,500
1,710
1,400
1,600
100
1,400
1,530
1,250
1,520
100
1,200
1,340
1,150
1,390
100
1,000
1,120
1,000
1,210
100
850
970
900
950
100
680
740
650
700
100
550
620
450
560
100
●NRS5012 type
Parts number
NRS5012T
NRS5012T
NRS5012T
NRS5012T
NRS5012T
NRS5012T
NRS5012T
NRS5012T
1R0NMGF
1R5NMGF
2R2MMGF
3R3MMGF
4R7MMGF
6R8MMGF
100MMGF
150MMGF
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
1.0
1.5
2.2
3.3
4.7
6.8
10
15
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Typ.
Max.
Typ.
4,500
4,670
2,300
2,750
100
3,800
3,970
2,200
2,470
100
3,100
3,510
2,000
2,300
100
2,400
2,580
1,450
1,650
100
2,200
2,320
1,400
1,560
100
1,700
1,950
1,100
1,260
100
1,400
1,550
850
1,000
100
1,200
1,240
640
740
100
●NRS5014 Shielded type
Parts number
NRS5014T
NRS5014T
NRS5014T
NRS5014T
NRS5014T
NRS5014T
NRS5014T
NRS5014T
NRS5014T
R47NMGG
1R2NMGG
2R2NMGG
3R3NMGG
4R7NMGG
6R8MMGG
100MMGG
150MMGG
220MMGG
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
0.47
1.2
2.2
3.3
4.7
6.8
10
15
22
±30％
±30％
±30％
±30％
±30％
±20％
±20％
±20％
±20％
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Typ.
Max.
Typ.
5,800
6,400
3,300
3,470
100
3,800
4,200
2,400
3,000
100
2,800
3,100
2,000
2,400
100
2,350
2,650
1,700
2,200
100
2,050
2,400
1,400
1,900
100
1,600
1,850
1,200
1,450
100
1,400
1,600
1,050
1,250
100
1,100
1,300
650
790
100
900
1,000
550
660
100
●NRS5020 Shielded type
Parts number
NRS5020T
NRS5020T
NRS5020T
NRS5020T
NRS5020T
NRS5020T
NRS5020T
NRS5020T
NRS5020T
NRS5020T
NRS5020T
NRS5020T
R47NMGJ
1R0NMGJ
1R5NMGJ
2R2NMGJ
3R3NMGJ
4R7MMGJ
6R8MMGJ
100MMGJ
150MMGJ
220MMGJ
470MMGJ
101MMGJ
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
0.47
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
47
100
±30％
±30％
±30％
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Typ.
Max.
Typ.
6,100
6,900
5,000
5,800
100
4,000
4,500
3,600
3,710
100
3,350
3,800
3,200
3,540
100
2,900
3,200
2,900
3,200
100
2,400
2,700
2,400
3,080
100
2,000
2,270
2,000
2,370
100
1,600
1,850
1,650
2,200
100
1,300
1,480
1,450
1,850
100
1,100
1,260
1,200
1,480
100
900
1,100
1,000
1,230
100
630
750
560
610
100
420
510
400
450
100
※） The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※） The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※） The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
i_smd_NR_e-E08R01.xls
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
56
21
for General Electronic Equipment
■PARTS NUMBER
●NRS5024 Shielded type
Parts number
1R0NMGJ
1R5NMGJ
2R2NMGJ
3R3NMGJ
4R7MMGJ
6R8MMGJ
100MMGJ
150MMGJ
220MMGJ
330MMGJ
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
±30％
±30％
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
DC Resistance
［Ω］（±20％）
85
67
51
41
37
28
21
18
15
11
0.016
0.022
0.029
0.043
0.055
0.080
0.125
0.170
0.230
0.370
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±30％）
185
110
46
36
31
22
20
14
13
10
9
0.010
0.015
0.023
0.030
0.035
0.052
0.070
0.125
0.180
0.225
0.325
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±30％）
60
42
32
28
21
18
13
9
7
6
0.017
0.022
0.027
0.029
0.049
0.056
0.080
0.126
0.180
0.310
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±20％）
77
56
42
36
30
25
12
0.090
0.110
0.135
0.165
0.220
0.270
0.580
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±20％）
95
69
45
42
36
34
30
22
18
12
8
6
3
1
0.050
0.067
0.090
0.105
0.125
0.125
0.165
0.200
0.295
0.465
0.580
0.965
1.16
1.67
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Typ.
Max.
Typ.
5,800
6,800
4,400
4,900
100
5,200
5,800
3,600
4,300
100
4,100
4,800
3,100
3,600
100
3,100
3,700
2,400
2,750
100
2,700
3,400
2,000
2,400
100
2,200
2,750
1,600
1,800
100
1,700
2,100
1,200
1,460
100
1,400
1,750
1,000
1,250
100
1,200
1,450
820
900
100
1,000
1,200
630
700
100
●NRS5030 Shielded type
Parts number
NRS5030T
NRS5030T
NRS5030T
NRS5030T
NRS5030T
NRS5030T
NRS5030T
NRS5030T
NRS5030T
NRS5030T
NRS5030T
R47NMGJ
1R0NMGJ
2R2NMGJ
3R3MMGJ
4R7MMGJ
6R8MMGJ
100MMGJ
150MMGJ
220MMGJ
330MMGJ
470MMGJ
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
0.47
1.0
2.2
3.3
4.7
6.8
10
15
22
33
47
±30％
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Typ.
Max.
Typ.
9,000
9,400
5,000
5,900
100
6,600
7,400
4,000
4,900
100
4,200
5,000
3,500
4,100
100
3,600
3,900
3,000
3,600
100
3,100
3,500
2,600
3,000
100
2,500
2,800
2,300
2,500
100
2,100
2,300
1,700
2,000
100
1,600
1,800
1,400
1,550
100
1,400
1,500
1,050
1,200
100
1,150
1,250
800
950
100
950
1,050
700
800
100
●NRS5040 Shielded type
Parts number
NRS5040T 1R5NMGJ
NRS5040T 2R2NMGJ
NRS5040T 3R3NMGJ
NRS5040T 4R7NMGK
NRS5040T 6R8MMGJ
NRS5040T 100MMGJ
NRS5040T 150MMGJ
NRS5040T 220MMGK
NRS5040T 330MMGJ
NRS5040T 470MMGJ
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
±30％
±30％
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Typ.
Max.
Typ.
6,400
6,530
4,500
4,730
100
5,000
5,250
3,700
4,080
100
4,000
4,280
3,300
3,770
100
3,300
3,470
3,100
3,500
100
2,800
2,910
2,400
2,470
100
2,300
2,470
2,100
2,210
100
2,000
2,150
1,800
1,920
100
1,500
1,580
1,400
1,470
100
1,300
1,390
1,200
1,270
100
1,100
1,150
900
950
100
POWER INDUCTORS
Self-resonant
frequency
［MHｚ］（min.）
INDUCTORS
NRS5024T
NRS5024T
NRS5024T
NRS5024T
NRS5024T
NRS5024T
NRS5024T
NRS5024T
NRS5024T
NRS5024T
EHS
●NRS6010 type
Parts number
NRS6010T
NRS6010T
NRS6010T
NRS6010T
NRS6010T
NRS6010T
NRS6010T
1R5MMGF
2R2MMGF
3R3MMGF
4R7MMGF
6R8MMGF
100MMGF
220MMGF
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
1.5
2.2
3.3
4.7
6.8
10
22
±20％
±20％
±20％
±20％
±20％
±20％
±20％
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Typ.
Max.
Typ.
2,400
2,650
1,900
2,150
100
1,900
2,120
1,700
1,950
100
1,600
1,750
1,500
1,750
100
1,300
1,470
1,400
1,600
100
1,200
1,300
1,200
1,320
100
1,000
1,100
1,100
1,200
100
650
720
700
740
100
●NRS6012 Shielded type
Parts number
NRS6012T 1R0NMGJ
NRS6012T 1R5NMGG
NRS6012T 2R5NMGG
NRS6012T 3R3NMGG
NRS6012T 4R7MMGG
NRS6012T 5R3MMGJ
NRS6012T 6R8MMGJ
NRS6012T 100MMGJ
NRS6012T 150MMGJ
NRS6012T 220MMGJ
NRS6012T 330MMGJ
NRS6012T 470MMGJ
NRS6012T 680MMGJ
NRS6012T 101MMGJ
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
1.0
1.5
2.5
3.3
4.7
5.3
6.8
10
15
22
33
47
68
100
±30％
±30％
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Typ.
Max.
Typ.
3,000
3,900
2,400
2,700
100
2,600
3,500
2,100
2,300
100
2,100
2,900
1,800
2,100
100
1,800
2,500
1,700
1,950
100
1,600
2,100
1,550
1,750
100
1,500
1,750
1,550
1,750
100
1,300
1,600
1,350
1,600
100
1,000
1,400
1,200
1,380
100
800
1,100
800
950
100
760
900
650
750
100
590
800
550
670
100
520
630
460
540
100
440
560
410
450
100
350
490
320
380
100
※） The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※） The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※） The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
i_smd_NR_e-E08R01.xls
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
21
57
for General Electronic Equipment
■PARTS NUMBER
●NRS6014 Shielded type
Parts number
NRS6014T
NRS6014T
NRS6014T
NRS6014T
NRS6014T
NRS6014T
NRS6014T
NRS6014T
1R2NMGG
2R2NMGG
3R3NMGG
4R7MMGG
6R8MMGG
100MMGG
150MMGG
220MMGG
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
1.2
2.2
3.3
4.7
6.8
10
15
22
±30％
±30％
±30％
±20％
±20％
±20％
±20％
±20％
INDUCTORS
POWER INDUCTORS
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±20％）
77
61
41
36
30
24
20
16
0.042
0.055
0.075
0.090
0.115
0.140
0.210
0.300
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±20％）
110
93
73
55
43
30
18
11
0.020
0.026
0.034
0.040
0.058
0.085
0.125
0.290
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±30％）
90
78
68
55
39
25
20
17
12
10
8
5
3
0.013
0.016
0.020
0.023
0.031
0.043
0.065
0.095
0.135
0.220
0.300
0.420
0.600
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±30％）
110
95
95
80
60
60
45
45
25
25
15
15
12
10
7
6
5
4
3
0.014
0.016
0.016
0.019
0.022
0.022
0.024
0.024
0.030
0.030
0.036
0.036
0.046
0.070
0.107
0.141
0.211
0.304
0.466
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Typ.
Max.
Typ.
4,000
4,400
2,750
3,200
100
3,000
3,500
2,300
2,600
100
2,500
2,600
2,000
2,200
100
2,000
2,170
1,900
1,950
100
1,700
1,880
1,650
1,700
100
1,400
1,540
1,400
1,500
100
1,150
1,300
1,200
1,280
100
950
1,100
1,000
1,090
100
●NRS6020 Shielded type
Parts number
NRS6020T
NRS6020T
NRS6020T
NRS6020T
NRS6020T
NRS6020T
NRS6020T
NRS6020T
0R8NMGG
1R5NMGJ
2R2NMGJ
3R3NMGJ
4R7NMGJ
6R8NMGJ
100MMGG
220MMGG
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
0.8
1.5
2.2
3.3
4.7
6.8
10
22
±30％
±30％
±30％
±30％
±30％
±30％
±20％
±20％
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Typ.
Max.
Typ.
6,400
7,400
4,100
4,800
100
4,300
5,300
3,600
4,200
100
3,200
4,000
2,900
3,400
100
2,800
3,400
2,750
3,100
100
2,400
2,800
2,150
2,500
100
2,000
2,600
1,800
2,100
100
1,900
2,240
1,500
1,700
100
1,250
1,470
950
1,100
100
●NRS6028 Shielded type
Parts number
NRS6028T 0R9NMGJ
NRS6028T 1R5NMGJ
NRS6028T 2R2NMGJ
NRS6028T 3R0NMGJ
NRS6028T 4R7MMGK
NRS6028T 6R8MMGJ
NRS6028T 100MMGK
NRS6028T 150MMGJ
NRS6028T 220MMGJ
NRS6028T 330MMGJ
NRS6028T 470MMGJ
NRS6028T 680MMGJ
NRS6028T 101MMGJ
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
0.9
1.5
2.2
3.0
4.7
6.8
10
15
22
33
47
68
100
±30％
±30％
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Typ.
Max.
Typ.
6,700
7,900
4,600
5,200
100
5,100
6,100
4,200
4,700
100
4,200
5,100
3,700
4,200
100
3,600
4,300
3,400
3,900
100
2,700
3,300
3,000
3,400
100
2,600
3,000
2,500
2,900
100
1,900
2,200
1,900
2,200
100
1,600
1,900
1,800
1,900
100
1,300
1,600
1,400
1,600
100
1,100
1,300
1,100
1,250
100
1,000
1,150
920
1,050
100
800
950
770
880
100
650
750
660
750
100
●NRS6045 Shielded type
Parts number
NRS6045T 1R0NMGK
NRS6045T 1R3NMGK
NRS6045T 1R5NMGK
NRS6045T 1R8NMGK
NRS6045T 2R2NMGK
NRS6045T 2R3NMGK
NRS6045T 3R0NMGK
NRS6045T 3R3NMGK
NRS6045T 4R5MMGK
NRS6045T 4R7NMGK
NRS6045T 6R3MMGK
NRS6045T 6R8MMGK
NRS6045T 100MMGK
NRS6045T 150MMGK
NRS6045T 220MMGK
NRS6045T 330MMGK
NRS6045T 470MMGK
NRS6045T 680MMGK
NRS6045T 101MMGK
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
1.0
1.3
1.5
1.8
2.2
2.3
3.0
3.3
4.5
4.7
6.3
6.8
10
15
22
33
47
68
100
±30％
±30％
±30％
±30％
±30％
±30％
±30％
±30％
±20％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Typ.
Max.
Typ.
9,800
11,000
4,500
5,200
100
8,200
9,300
4,200
4,800
100
8,200
9,300
4,200
4,800
100
7,200
8,100
3,900
4,400
100
6,400
7,300
3,600
4,100
100
6,400
7,300
3,600
4,100
100
5,600
6,500
3,300
4,000
100
5,600
6,500
3,300
4,000
100
4,400
5,400
3,100
3,600
100
4,400
5,400
3,100
3,600
100
3,600
4,300
3,000
3,300
100
3,600
4,300
3,000
3,300
100
3,100
3,600
2,400
2,800
100
2,500
3,000
1,900
2,300
100
2,000
2,400
1,600
1,900
100
1,650
2,000
1,400
1,600
100
1,400
1,600
1,150
1,350
100
1,100
1,300
950
1,100
100
900
1,200
750
900
100
※） The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※） The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※） The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
i_smd_NR_e-E08R01.xls
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
58
21
for General Electronic Equipment
■PARTS NUMBER
●NRS8030 Shielded type
Parts number
1R0NJGJ
1R5NJGJ
2R2NJGJ
3R3MJGJ
4R7MJGJ
6R8MJGJ
100MJGJ
150MJGJ
220MJGJ
330MJGJ
470MJGJ
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
±30％
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
DC Resistance
［Ω］（±30％）
120
80
60
50
40
32
27
20
16
13
11
0.009
0.012
0.015
0.019
0.022
0.029
0.033
0.060
0.070
0.120
0.170
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±30％）
85
85
63
63
50
50
34
34
30
24
22
16
13
12
8
7
6
5
4
0.006
0.006
0.007
0.007
0.009
0.009
0.015
0.015
0.018
0.025
0.034
0.050
0.066
0.100
0.140
0.210
0.280
0.420
0.620
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±20％）
126
98
82
63
56
46
35
30
25
20
17
0.065
0.080
0.095
0.140
0.190
0.300
0.450
0.740
1.03
1.55
2.05
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±20％）
110
92
70
55
48
40
32
27
22
19
17
0.050
0.060
0.080
0.100
0.130
0.190
0.290
0.450
0.630
1.03
1.45
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Typ.
Max.
Typ.
7,800
9,300
6,200
7,600
100
6,200
7,800
5,300
6,400
100
4,900
6,100
4,800
5,600
100
4,200
5,200
4,300
5,100
100
3,600
4,400
4,000
4,700
100
3,000
3,600
3,400
4,000
100
2,400
2,900
3,000
3,600
100
2,000
2,300
2,200
2,600
100
1,750
2,200
1,900
2,300
100
1,300
1,600
1,500
1,800
100
1,100
1,400
1,300
1,500
100
●NRS8040 Shielded type
Parts number
NRS8040T 0R9NJGJ
NRS8040T 1R0NJGJ
NRS8040T 1R4NJGJ
NRS8040T 1R5NJGJ
NRS8040T 2R0NJGJ
NRS8040T 2R2NJGJ
NRS8040T 3R3NJGJ
NRS8040T 3R6NJGJ
NRS8040T 4R7NJGJ
NRS8040T 6R8NJGJ
NRS8040T 100MJGJ
NRS8040T 150MJGJ
NRS8040T 220MJGJ
NRS8040T 330MJGK
NRS8040T 470MJGK
NRS8040T 680MJGK
NRS8040T 101MJGK
NRS8040T 151MJGK
NRS8040T 221MJGK
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
0.9
1
1.4
1.5
2.0
2.2
3.3
3.6
4.7
6.8
10
15
22
33
47
68
100
150
220
±30％
±30％
±30％
±30％
±30％
±30％
±30％
±30％
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Typ.
Max.
Typ.
13,000
14,000
7,800
9,600
100
13,000
14,000
7,800
9,600
100
10,000
11,000
7,000
8,400
100
10,000
11,000
7,000
8,400
100
8,100
9,200
6,300
7,600
100
8,100
9,200
6,300
7,600
100
6,400
6,800
4,900
6,000
100
6,400
6,800
4,900
6,000
100
5,400
5,900
4,100
5,200
100
4,400
4,800
3,700
4,400
100
3,800
4,100
3,100
3,500
100
2,900
3,200
2,400
3,000
100
2,400
2,700
2,200
2,600
100
2,000
2,300
1,700
1,900
100
1,500
1,800
1,500
1,600
100
1,300
1,500
1,200
1,300
100
1,100
1,300
1,000
1,100
100
900
980
800
890
100
700
800
670
740
100
POWER INDUCTORS
Self-resonant
frequency
［MHｚ］（min.）
INDUCTORS
NRS8030T
NRS8030T
NRS8030T
NRS8030T
NRS8030T
NRS8030T
NRS8030T
NRS8030T
NRS8030T
NRS8030T
NRS8030T
EHS
●NR 3010 Shielded type
Parts number
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
3010T
3010T
3010T
3010T
3010T
3010T
3010T
3010T
3010T
3010T
3010T
1R0N
1R5N
2R2M
3R3M
4R7M
6R8M
100M
150M
220M
330M
470M
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Max.
1,300
1,400
100
1,200
1,300
100
1,100
1,100
100
940
870
100
780
750
100
630
610
100
510
500
100
400
400
100
350
350
100
260
275
100
235
220
100
●NR 3012 Shielded type
Parts number
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
3012T
3012T
3012T
3012T
3012T
3012T
3012T
3012T
3012T
3012T
3012T
1R0N
1R5N
2R2M
3R3M
4R7M
6R8M
100M
150M
220M
330M
470M
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Max.
1,490
1,500
100
1,400
1,360
100
1,200
1,100
100
1,050
910
100
980
770
100
740
670
100
630
540
100
485
440
100
420
375
100
330
310
100
280
250
100
※） The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※） The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※） The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
i_smd_NR_e-E08R01.xls
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
21
59
for General Electronic Equipment
■PARTS NUMBER
●NR 3015 Shielded type
Parts number
INDUCTORS
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
3015T
3015T
3015T
3015T
3015T
3015T
3015T
3015T
3015T
3015T
3015T
1R0N
1R5N
2R2M
3R3M
4R7M
6R8M
100M
150M
220M
330M
470M
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
POWER INDUCTORS
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±20％）
100
87
64
49
40
36
28
23
20
18
17
0.030
0.040
0.060
0.080
0.120
0.160
0.230
0.360
0.520
0.840
1.34
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±20％）
116
73
58
47
38
31
24
19
15
13
0.100
0.150
0.180
0.210
0.300
0.380
0.510
0.870
1.54
1.81
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±20％）
131
66
50
45
35
28
23
18
15
12
0.060
0.090
0.130
0.140
0.180
0.240
0.400
0.480
0.810
1.00
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±20％）
80
52
44
34
29
24
19
16
12
10
8.3
6.5
5.5
4.0
0.030
0.060
0.070
0.090
0.110
0.180
0.250
0.360
0.530
0.650
1.00
1.50
2.50
4.00
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±30％）
60
42
32
28
21
18
13
9
7
6
0.020
0.022
0.027
0.029
0.049
0.056
0.080
0.126
0.180
0.310
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Max.
2,100
2,100
100
1,800
1,820
100
1,480
1,500
100
1,210
1,230
100
1,020
1,040
100
880
870
100
710
700
100
560
560
100
470
470
100
370
390
100
300
320
100
●NR 4010 Shielded type
Parts number
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
4010T
4010T
4010T
4010T
4010T
4010T
4010T
4010T
4010T
4010T
1R0N
2R2N
3R3M
4R7M
6R8M
100M
150M
220M
330M
470M
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
1.0
2.2
3.3
4.7
6.8
10
15
22
33
47
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Max.
1,050
1,800
100
890
1,150
100
820
1,100
100
750
900
100
620
740
100
600
560
100
510
470
100
400
360
100
300
280
100
280
240
100
●NR 4012 Shielded type
Parts number
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
4012T
4012T
4012T
4012T
4012T
4012T
4012T
4012T
4012T
4012T
1R0N
2R2M
3R3M
4R7M
6R8M
100M
150M
220M
330M
470M
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
1.0
2.2
3.3
4.7
6.8
10
15
22
33
47
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Max.
1,500
2,500
100
1,200
1,650
100
980
1,200
100
960
1,050
100
840
900
100
770
740
100
600
560
100
540
510
100
420
400
100
370
350
100
●NR 4018 Shielded type
Parts number
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
4018T
4018T
4018T
4018T
4018T
4018T
4018T
4018T
4018T
4018T
4018T
4018T
4018T
4018T
1R0N
2R2M
3R3M
4R7M
6R8M
100M
150M
220M
330M
470M
680M
101M
151M
221M
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
1.0
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Max.
1,830
4,000
100
1,440
2,700
100
1,230
2,000
100
1,200
1,700
100
1,060
1,450
100
840
1,200
100
650
940
100
590
800
100
490
650
100
420
570
100
320
470
100
270
400
100
220
310
100
170
270
100
●NR 5040 Shielded type
Parts number
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
5040T 1R5N
5040T 2R2N
5040T 3R3N
5040T 4R7N
5040T 6R8M
5040T 100M
5040T 150M
5040T 220M
5040T 330M
5040T 470M
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
±30％
±30％
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Max.
6,000
3,600
100
4,600
3,500
100
3,800
3,300
100
3,300
3,100
100
2,300
2,600
100
2,100
2,300
100
1,800
2,000
100
1,400
1,600
100
1,200
1,300
100
900
1,100
100
※） The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※） The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※） The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
i_smd_NR_e-E08R01.xls
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
60
21
for General Electronic Equipment
■PARTS NUMBER
●NR 6012 Shielded type
Parts number
6012T
6012T
6012T
6012T
6012T
6012T
6012T
6012T
6012T
6012T
6012T
2R5NE
4R0NE
5R3ME
6R8ME
100ME
150ME
220ME
330ME
470ME
680ME
101ME
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
2.5
4.0
5.3
6.8
10
15
22
33
47
68
100
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
DC Resistance
［Ω］（±20％）
45
39
34
30
22
18
12
8
6
3
1
0.090
0.105
0.125
0.165
0.235
0.330
0.530
0.700
1.05
1.35
2.18
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±20％）
110
93
73
55
43
30
18
11
0.020
0.026
0.034
0.040
0.058
0.085
0.125
0.290
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±30％）
90
78
68
55
39
30
20
17
12
10
8
5
3
0.013
0.016
0.020
0.023
0.031
0.040
0.065
0.095
0.135
0.220
0.300
0.420
0.600
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±30％）
110
95
80
60
45
25
15
12
10
7
6
5
4
3
0.014
0.016
0.018
0.021
0.024
0.031
0.038
0.047
0.077
0.115
0.145
0.220
0.330
0.500
Self-resonant
frequency
［MHｚ］（min.）
DC Resistance
［Ω］（±30％）
85
63
50
34
30
24
22
16
13
12
8
7
6
0.006
0.007
0.009
0.015
0.018
0.025
0.034
0.050
0.066
0.100
0.150
0.230
0.290
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Max.
1,730
2,100
100
1,570
1,800
100
1,400
1,500
100
1,180
1,300
100
1,000
1,000
100
790
800
100
630
760
100
530
590
100
460
520
100
410
440
100
320
350
100
●NR 6020 Shielded type
Parts number
NR
NR
NR
NR
NR
NR
NR
NR
6020T
6020T
6020T
6020T
6020T
6020T
6020T
6020T
0R8N
1R5N
2R2N
3R3N
4R7N
6R8N
100M
220M
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
0.8
1.5
2.2
3.3
4.7
6.8
10
22
±30％
±30％
±30％
±30％
±30％
±30％
±20％
±20％
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Max.
5,500
3,800
100
4,000
3,200
100
2,700
3,200
100
2,600
2,800
100
2,000
2,400
100
1,800
2,000
100
1,400
1,700
100
950
1,050
100
●NR 6028 Shielded type
Parts number
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
6028T 0R9N
6028T 1R5N
6028T 2R2N
6028T 3R0N
6028T 4R7M
6028T 6R0M
6028T 100M
6028T 150M
6028T 220M
6028T 330M
6028T 470M
6028T 680M
6028T 101M
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
0.9
1.5
2.2
3.0
4.7
6.0
10
15
22
33
47
68
100
±30％
±30％
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Max.
6,600
4,600
100
4,200
5,000
100
3,700
4,200
100
3,400
3,600
100
3,000
2,700
100
2,500
2,500
100
1,900
1,900
100
1,800
1,600
100
1,400
1,300
100
1,100
1,100
100
920
950
100
770
760
100
660
620
100
POWER INDUCTORS
Self-resonant
frequency
［MHｚ］（min.）
INDUCTORS
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
EHS
●NR 6045 Shielded type
Parts number
NR 6045T 1R0N
NR 6045T 1R3N
NR 6045T 1R8N
NR 6045T 2R3N
NR 6045T 3R0N
NR 6045T 4R5M
NR 6045T 6R3M
NR 6045T 100M
NR 6045T 150M
NR 6045T 220M
NR 6045T 330M
NR 6045T 470M
NR 6045T 680M
NR 6045T 101M
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
1.0
1.3
1.8
2.3
3.0
4.5
6.3
10
15
22
33
47
68
100
±30％
±30％
±30％
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Max.
8,500
4,200
100
8,000
4,000
100
7,000
3,700
100
3,500
6,000
100
3,200
5,000
100
3,000
4,000
100
2,800
3,800
100
2,500
3,000
100
1,900
2,300
100
1,500
1,900
100
1,400
1,500
100
1,100
1,300
100
900
1,000
100
700
800
100
●NR 8040 Shielded type
Parts number
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
8040T 0R9N
8040T 1R4N
8040T 2R0N
8040T 3R6N
8040T 4R7N
8040T 6R8N
8040T 100M
8040T 150M
8040T 220M
8040T 330M
8040T 470M
8040T 680M
8040T 101M
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
Inductance tolerance
［μH］
0.9
1.4
2.0
3.6
4.7
6.8
10
15
22
33
47
68
100
±30％
±30％
±30％
±30％
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
Rated current ※） ［ｍA］
Measuring
Saturation current: Idc1 Temperature rise current: Idc2
frequency［kHz］
Max.
Max.
11,000
7,800
100
7,000
9,000
100
6,300
7,400
100
4,900
5,300
100
4,100
4,700
100
3,700
4,000
100
3,100
3,400
100
2,400
2,700
100
2,200
2,200
100
1,700
1,900
100
1,400
1,500
100
1,100
1,200
100
1,000
1,000
100
※） The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※） The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※） The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
i_smd_NR_e-E08R01.xls
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
21
61
SMD POWER INDUCTORS (NR SERIES/NR SERIES H TYPE/M TYPE/S TYPE/V TYPE)
■PACKAGING
①Minimum Quantity
Standard Quantity [pcs]
Tape ＆ Reel
2500
Type
NRV2010
NRS2012
NRV2012
NRH2410
NRH2412
NR 3010
NRH3010
NR 3012
NRH3012
NRV3012
NR 3015
NRS3015
NR 4010
NRS4010
NR 4012
NRS4012
NR 4018
NRS4018
Standard Quantity [pcs]
Tape ＆ Reel
1000
1000
1000
800
2500
500
Type
NRS5010
NRS5012
NRS5014
NRS5020
NRS5024
NRS5030
NR 5040
NRS5040
NRS6010
NR 6012
NRS6012
NRS6014
NR 6020
NRS6020
NR 6028
NRS6028
NR 6045
NRM6045
NRS6045
NRS8030
NR 8040
NRS8040
2500
2500
2500
2000
2000
2000
5000
4500
3500
1500
1000
1000
1000
2500
2000
1500
1000
1000
②Tape Material
●Embossed Tape
Top tape
Chip Filled
Sprocket hole
Base tape
Chip cavity
Chip
③Taping dimensions
●Embossed tape 8mm wide (0.315 inches wide)
1.75±0.1
(0.069±0.004）
A
B
T
8.0±0.2
(0.315±0.008)
φ1.5＋0.1/－0
(φ0.059＋0.004/-0)
3.5±0.1
(0.138±0.004)
Sprocket hole
K
F
4.0±0.1
(0.157±0.004)
2.0±0.05
(0.079±0.002)
Electrode（bottom view）
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_smd_NR_pack_e-E07R01
Chip cavity
Type
NRV2010
NRS2012
NRV2012
NRH2410
NRH2412
NR 3010
NRH3010
NR 3012
NRH3012
NRV3012
NR 3015
NRS3015
A
B
2.2±0.1
（0.102±0.004）
2.6±0.1
（0.087±0.004）
Insertion pitch
F
Tape thickness
T
K
2.2±0.1
（0.102±0.004）
0.25±0.05
（0.009±0.002）
1.3±0.1
（0.051±0.004）
2.6±0.1
（0.102±0.004）
0.25±0.05
（0.009±0.002）
1.3±0.1
（0.051±0.004）
1.4±0.1
（0.055±0.004）
1.6±0.1
（0.063±0.004）
4.0±0.1
（0.157±0.004）
3.2±0.1
（0.126±0.004）
3.2±0.1
（0.126±0.004）
0.3±0.05
（0.012±0.002）
1.9±0.1
（0.075±0.004）
Unit：mm（inch）
●Embossed tape 12mm wide (0.47 inches wide)
1.75±0.1
(0.069±0.004）
A
B
T
12.0±0.3
(0.472±0.012)
φ1.5＋0.1/－0
(φ0.059＋0.004/-0)
5.5±0.1
(0.217±0.004)
Sprocket hole
K
F
Type
NR 4010
NRS4010
NR 4012
NRS4012
NR 4018
NRS4018
2.0±0.1
(0.079±0.004)
4.0±0.1
(0.157±0.004)
Electrode（bottom view）
Chip cavity
A
B
4.3±0.1
（0.169±0.004）
4.3±0.1
（0.169±0.004）
Insertion pitch
F
NRS5010
0.3±0.1
（0.012±0.004）
NRS5012
NRS5014
Tape thickness
T
5.25±0.1
（0.207±0.004）
5.25±0.1
（0.207±0.004）
5.15±0.1
（0.203±0.004）
5.15±0.1
（0.203±0.004）
5.15±0.1
（0.203±0.004）
5.15±0.1
（0.203±0.004）
NRS5020
NRS5024
NRS5030
NR 5040
NRS5040
8.0±0.1
（0.315±0.004）
NRS6010
NR 6012
NRS6012
0.4±0.1
（0.016±0.004）
NRS6014
NR 6020
NRS6020
NR 6028
NRS6028
NR 6045
NRM6045
NRS6045
6.3±0.1
（0.248±0.004）
6.3±0.1
（0.248±0.004）
K
1.4±0.1
（0.055±0.004）
1.6±0.1
（0.063±0.004）
2.1±0.1
（0.083±0.004）
1.4±0.1
（0.055±0.004）
1.4±0.1
（0.055±0.004）
1.6±0.1
（0.063±0.004）
2.3±0.1
（0.091±0.004）
2.7±0.1
（0.106±0.004）
3.2±0.1
（0.126±0.004）
4.2±0.1
（0.165±0.004）
1.4±0.1
（0.055±0.004）
1.6±0.1
（0.063±0.004）
1.6±0.1
（0.063±0.004）
2.3±0.1
（0.090±0.004）
3.1±0.1
（0.122±0.004）
4.7±0.1
（0.185±0.004）
Unit：mm（inch）
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_smd_NR_pack_e-E07R01
●Embossed tape 16mm wide (0.63 inches wide)
φ1.5±0.1
(φ0.059±0.004）
Sprocket hole
1.75±0.1
(0.069±0.004）
A
B
16.0±0.3
(0.630±0.012)
7.5±0.1
(0.295±0.004)
T
K
F
2.0±0.1
(0.079±0.004)
Type
NRS8030
NR 8040
NRS8040
4.0±0.1
(0.157±0.004)
Electrode（bottom view）
A
Chip cavity
B
Insertion pitch
F
T
Tape thickness
8.3±0.1
（0.327±0.004）
8.3±0.1
（0.327±0.004）
12.0±0.1
（0.472±0.004）
0.5±0.1
（0.020±0.004）
φD
Reel size (Reference values)
φd
W
180±0.5
（7.087±0.019）
60±1.0
（2.36±0.04）
10.0±1.5
（0.394±0.059）
K
3.4±0.1
（0.134±0.004）
4.5±0.1
（0.177±0.004）
Unit：mm（inch）
④Leader and Blank portion
●NR, NRH, NRS, NRV
⑤Reel size
Type
NRV2010
NRS2012
NRV2012
NRH2410
NRH2412
NR 3010
NRH3010
NR 3012
NRH3012
NRV3012
NR 3015
NRS3015
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_smd_NR_pack_e-E07R01
NRS5010
NRS5012
NRS5014
NRS5020
NRS5030
NRS6010
NR 6012
NRS6012
NRS6014
180±3.0
（7.087±0.118）
60±2.0
（2.36±0.08）
14.0±1.5
（0.551±0.059）
Unit：mm（inch）
Type
NR 4010
NRS4010
NR 4012
NRS4012
NR 4018
NRS4018
NRS5024
NR 5040
NRS5040
NR 6020
NRS6020
NR 6028
NRS6028
NR 6045
NRM6045
NRS6045
NRS8030
NR 8040
NRS8040
φD
330±3.0
（12.99±0.118）
Reel size (Reference values)
φd
t（max.）
80±2.0
（3.15±0.078）
W
18.5
（0.72）
13.5±1.0
（0.531±0.04）
22.5
（0.89）
17.5±1.0
（0.689±0.04）
Unit：mm（inch）
⑥Top Tape Strength
The top tape requires a peel-off force of 0.1 to 1.3N in the direction of the arrow as illustrated below.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_smd_NR_pack_e-E07R01
SMD POWER INDUCTORS（NR□, NS SERIES）
■RELIABILITY DATA
1. Operating Temperature Range
Specified Value
Test Methods and
Remarks
NR30/40/50/60/80, NRS20, NRV20/30,
NRH24/30 Type
－25～＋120℃
NRS40/50/60/80 Type
－25～＋125℃
NR10050 Type
－25～＋105℃
NS101, NS125 Type
－40～＋125℃
Including self-generated heat
2. Storage Temperature Range
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
－40～＋85℃
NR10050 Type
NS101, NS125 Type
Test Methods and
Remarks
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type：
－5 to 40℃ for the product with taping.
3. Rated current
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
Within the specified tolerance
NR10050 Type
NS101, NS125 Type
4. Inductance
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
Within the specified tolerance
NR10050 Type
NS101, NS125 Type
Test Methods and
Remarks
Measuring equipment
: LCR Meter （HP 4285A or equivalent）
Measuring frequency
: Specified frequency
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type
Measuring equipment
: LCR Meter （HP 4285A or equivalent）
Measuring frequency
: 100kHz, 1V
NR10050 Type :
Measuring equipment
: LCR Meter （HP 4263A or equivalent）
Measuring frequency
: 100kHz, 1V
:
5. DC Resistance
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
Within the specified tolerance
NR10050 Type
NS101, NS125 Type
Test Methods and
Remarks
Measuring equipment
: DC ohmmeter （HIOKI 3227 or equivalent）
6. Self resonance frequency
NR30/40/50/60/80, NRV30, NRH24/30,
NRS40/50/60/80 Type
Specified Value
NS101, NS125 Type
Test Methods and
Remarks
Within the specified tolerance
NR10050 Type
－
NR30/40/50/60/80, NRV30, NRH24/30, NRS40/50/60/80 Type, NR10050 Type :
Measuring equipment
: Impedance analyzer/material analyzer（HP4291A or equivalent HP4191A, 4192A or equivalent）
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_smd_NR_NS_reli_e-E04R01
7. Temperature characteristic
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
Inductance change : Within ±20%
NR10050 Type
NS101, NS125 Type
Inductance change : Within ±15%
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type :
Measurement of inductance shall be taken at temperature range within －25℃～＋85℃.
With reference to inductance value at ＋20℃., change rate shall be calculated.
Test Methods and
Remarks
NS101, NS125 Type :
Measurement of inductance shall be taken at temperature range within －40℃～＋125℃.
With reference to inductance value at ＋20℃., change rate shall be calculated.
Change of maximum inductance deviation in step 1 to 5
Step
Temperature（℃）
1
20
2
Minimum operating temperature
3
20 (Standard temperature)
4
Maximum operating temperature
5
20
8. Resistance to flexure of substrate
Specified Value
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
No damage
NR10050 Type
－
NS101, NS125 Type
No damage
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NS101/125 Type :
The test samples shall be soldered to the test board by the reflow. As illustrated below, apply force in the direction of the arrow indicating
until deflection of the test board reaches to 2 mm.
Test board size
: 100×40×1.0
Test board material
: Glass epoxy-resin
Solder cream thickness
: 0.10mm (NR30, NRS20, NRH24/30, NRV20/30)
: 0.15mm(NR40/50/60/80, NRS40/50/60, NS101/125Type)
Test Methods and
Remarks
Land dimension
C
A
B
A
Type
NRS20, NRV20
NRH24
NR30, NRV30, NRH30
NR40, NRS40
NR50, NRS50
NR60, NRS60
NR80, NRS80
A
0.65
0.7
0.8
1.2
1.5
1.6
1.8
B
0.7
0.75
1.4
1.6
2.1
3.1
3.8
C
2.0
2.0
2.7
3.7
4.0
5.7
7.5
Type
NS101
NS125
A
2.5
2.5
B
5.6
8.6
C
3.2
3.2
9. Insulation resistance : between wires
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
NR10050 Type
－
NS101, NS125 Type
10. Insulation resistance : between wire and core
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
NR10050 Type
－
NS101, NS125 Type
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_smd_NR_NS_reli_e-E04R01
11. Withstanding voltage : between wire and core
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
－
NR10050 Type
NS101, NS125 Type
12. Adhesion of terminal electrode
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
Shall not come off PC board
NR10050 Type
NS101, NS125 Type
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NS101/125 Type :
The test samples shall be soldered to the test board by the reflow.
Applied force
: 10N to X and Y directions.
Duration
: 5s.
Solder cream thickness
: 0.10mm (NR30, NRS20, NRH24/30, NRV20/30)
: 0.15mm (NR40/50/60/80, NRS40/50/60, NS101/125Type)
Test Methods and
Remarks
NR10050 Type
Applied force
Duration
: 5N to X and Y directions.
: 5s.
13. Resistance to vibration
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
NR10050 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NS101, NS125 Type
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type :
The test samples shall be soldered to the test board by the reflow.
Then it shall be submitted to below test conditions.
Test Methods and
Remarks
Frequency Range
Total Amplitude
Sweeping Method
Time
10～55Hz
1.5mm (May not exceed acceleration 196m/s2)
10Hz to 55Hz to 10Hz for 1min.
X
Y
For 2 hours on each X, Y, and Z axis.
Z
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48hrs.
14. Solderability
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
NR10050 Type
At least 90％ of surface of terminal electrode is covered by new solder.
NS101, NS125 Type
Test Methods and
Remarks
The test samples shall be dipped in flux, and then immersed in molten solder as shown in below table.
Flux : Methanol solution containing rosin 25%.
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type
Solder Temperature
245±5℃
Time
5±1.0 sec.
※Immersion depth : All sides of mounting terminal shall be immersed.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_smd_NR_NS_reli_e-E04R01
15. Resistance to soldering heat
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
NR10050 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NS101, NS125 Type
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type :
The test sample shall be exposed to reflow oven at 230±5℃ for 40 seconds, with peak temperature at 260±5℃ for 5 seconds, 2 times.
Test Methods and
Remarks
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80Type, NS101/125 Type
Test board material
: Glass epoxy-resin
Test board thickness : 1.0mm
NR10050 Type
Test board material
: Glass epoxy-resin
Test board thickness : 1.6mm
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48hrs.
16. Thermal shock
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
NR10050 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NS101, NS125 Type
Test Methods and
Remarks
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type :
The test samples shall be soldered to the test board by the reflow. The test samples shall be placed at specified temperature for specified
time by step 1 to step 4 as shown in below table in sequence. The temperature cycle shall be repeated 100 cycles.
Conditions of 1 cycle
Step
Temperature (℃)
Duration (min)
1
－40±3
30±3
2
Room temperature
Within 3
3
＋85±2
30±3
4
Room temperature
Within 3
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48hrs.
17. Damp heat
Specified Value
Test Methods and
Remarks
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NR10050 Type
－
NS101, NS125 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NS101/125 Type :
The test samples shall be soldered to the test board by the reflow.
The test samples shall be placed in thermostatic oven set at specified temperature and humidity as shown in below table.
Temperature
60±2℃
Humidity
90～95%RH
Time
500＋24/－0 hour
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48hrs.
18. Loading under damp heat
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
NR10050 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NS101, NS125 Type
Test Methods and
Remarks
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type :
The test samples shall be soldered to the test board by the reflow.
The test samples shall be placed in thermostatic oven set at specified temperature and humidity and applied the rated current
continuously as shown in below table.
Temperature
60±2℃
Humidity
90～95％RH
Applied current
Rated current
Time
500＋24/－0 hour
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48hrs.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_smd_NR_NS_reli_e-E04R01
19. Low temperature life test
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
NR10050 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NS101, NS125 Type
Test Methods and
Remarks
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type :
The test samples shall be soldered to the test board by the reflow. After that, the test samples shall be placed at test conditions as shown
in below table.
Temperature
－40±2℃
Time
500＋24/－0 hour
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48hrs.
20. High temperature life test
Specified Value
Test Methods and
Remarks
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
－
NR10050 Type
－
NS101, NS125 Type
－
NR10050 Type :
Temperature
105±3℃
Time
500＋24/－0 hour
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48hrs.
21. Loading at high temperature life test
Specified Value
Test Methods and
Remarks
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NR10050 Type
－
NS101, NS125 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NR30/40/50/60/80, NRV30, NRH24/30, NRS40/50/60/80 Type, NS12555, NS12565, NS12575 Type :
The test samples shall be soldered to the test board by the reflow soldering.
Temperature
85±2℃
Applied current
Rated current
Time
500＋24/－0 hour
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48hrs.
22. Standard condition
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
NR10050 Type
NS101, NS125 Type
Standard test condition :
Unless otherwise specified, temperature is 20±15℃ and 65±20％of
relative humidity.
When there is any question concerning measurement result: In order to
provide correlation data, the test shall be condition of 20±2℃ of
temperature, 65±5% relative humidity.
Inductance is in accordance with our measured value.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_smd_NR_NS_reli_e-E04R01
SMD POWER INDUCTORS（NR□, NS SERIES）
■PRECAUTIONS
1. Circuit Design
Precautions
◆Operating environment
1. The products described in this specification are intended for use in general electronic equipment,(office supply equipment,
telecommunications systems, measuring equipment, and household equipment). They are not intended for use in mission-critical
equipment or systems requiring special quality and high reliability (traffic systems, safety equipment, aerospace systems, nuclear
control systems and medical equipment including life-support systems,) where product failure might result in loss of life, injury or
damage. For such uses, contact TAIYO YUDEN Sales Department in advance.
2. PCB Design
Precautions
◆Land pattern design
1. Please refer to a recommended land pattern.
2. There is stress, which has been caused by distortion of a PCB, to the inductor.
(NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/30/40/50/60/80 Type)
3. Please consider the arrangement of parts on a PCB. (NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/30/40/50/60/80 Type)
◆Land pattern design
Surface Mounting
1. Mounting and soldering conditions should be checked beforehand.
2. Applicable soldering process to this products is reflow soldering only.
3. Please use the recommended land pattern shown as below. Electrical characteristics and the mounting ability of the product are being
considered in the recommended land pattern. If a PCB is designed with other dimensions, defective soldering and stress to a product
may occur due to misalignment. The performance of the product may not be brought out. If an adopted land pattern is different from the
recommended land pattern, stress to the product will increase. It may cause cracks or defective electrical characteristics of the
product. Please conduct validation completely before studying adoption of this product and please judge the pros and cons of adoption
of this product with taking on responsibility.
(NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/30/40/50/60/80 Type)
4. As coefficients of thermal expansion between an inductor and a PCB differs, cracks may occur on a ferrite core when thermal stress is
applied to them after mounting an inductor. (Please refer to the drawings below.) Please conduct validation completely before studying
adoption of this product and please judge the pros and cons of adoption of this product with taking on responsibility.
(NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/30/40/50/60/80 Type)
Clack on ferrite core
Technical
considerations
Solder, electrode
PCB
5. SMD inductors should be located to minimize any possible mechanical stresses from board warp or deflection. When splitting the PC
board after mounting inductors and other components, care is required so as not to give any stresses of deflection or twisting to the
board.
（NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/30/40/50/60/80 Type）
A product tends to undergo stress in order “A>C>B≡D”.
Please consider the layouts of a product to minimize any stresses.
Electrode
A
Perforation
Slit
D
B
C
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/)
i_smd_NR_NS_prec_e-E06R01
3. Considerations for automatic placement
Precautions
◆Adjustment of mounting machine
1. Excessive impact load should not be imposed on the products when mounting onto the PC boards.
2. Mounting and soldering conditions should be checked beforehand.
◆Adjustment of mounting machine
1. When installing products, care should be taken not to apply distortion stress as it may deform the products.
2. Stress may be applied to a product with a warp or a twist in handling of the product. Please conduct validation completely before
studying adoption of this product and please judge the pros and cons of adoption of this product with taking on responsibility.
(NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/30/40/50/60/80 Type)
Technical
considerations
＜Wrap＞
＜Twist＞
4. Soldering
Precautions
◆Reflow soldering
1. Please contact any of our offices for a reflow soldering, and refer to the recommended condition specified.
2. The product shall be used reflow soldering only.
3. Please do not add any stress to a product until it returns in normal temperature after reflow soldering.
◆Lead free soldering
1. When using products with lead free soldering, we request to use them after confirming adhesion, temperature of resistance to soldering
heat, soldering etc sufficiently.
◆Recommended conditions for using a soldering iron (NR10050 Type)
・ Put the soldering iron on the land-pattern.
・ Soldering iron's temperature - Below 350℃
・ Duration - 3 seconds or less
・ The soldering iron should not directly touch the inductor.
◆Reflow soldering
1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently
degrade the reliability of the products.
・NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type
Recommended reflow condition (Pb free solder)
Technical
considerations
5. Cleaning
Precautions
Technical
considerations
◆Cleaning conditions
1. Washing by supersonic waves shall be avoided.
◆Cleaning conditions
1. If washed by supersonic waves, the products might be broken.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/)
i_smd_NR_NS_prec_e-E06R01
6. Handling
Precautions
Technical
considerations
◆Handling
1. Keep the product away from all magnets and magnetic objects.
◆Breakaway PC boards (splitting along perforations)
1. When splitting the PC board after mounting product, care should be taken not to give any stresses of deflection or twisting to the board.
2. Board separation should not be done manually, but by using the appropriate devices.
◆Mechanical considerations
1. Please do not give the product any excessive mechanical shocks.
2. Please do not add any shock and power to a product in transportation.
◆Pick-up pressure
1. Please do not push to add any pressure to a winding part. Please do not give any shock and push into a ferrite core exposure part.
◆Packing
1. Please avoid accumulation of a packing box as much as possible.
◆Handling
1. There is a case that a characteristic varies with magnetic influence.
◆Breakaway PC boards (splitting along perforations)
1. The position of the product on PCBs shall be carefully considered to minimize the stress caused from splitting of the PCBs.
◆Mechanical considerations
1. There is a case to be damaged by a mechanical shock.
2. There is a case to be broken by the handling in transportation.
◆Pick-up pressure
1. Damage and a characteristic can vary with an excessive shock or stress.
◆Packing
1. If packing boxes are accumulated, that could cause a deformation on packing tapes or a damage on the products.
7. Storage conditions
Precautions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the
storage area should be controlled.
・ Recommended conditions
Ambient temperature : －5～40℃
Humidity : Below 70% RH
・ The ambient temperature must be kept below 30℃. Even under ideal storage conditions, solderability of products electrodes may
decrease as time passes.
For this reason, product should be used within 6 months from the time of delivery.
In case of storage over 6 months, solderability shall be checked before actual usage.
Technical
considerations
◆Storage
1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes
and deterioration of taping/packaging materials may take place.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/)
i_smd_NR_NS_prec_e-E06R01
工商网监
湘ICP备2023018690号
