TBPS1R682K440H5Q

Notice for TAIYO YUDEN products  1 Please read this notice before using the TAIYO YUDEN products. ■ Product information in this catalog is as of October 2008. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or usage of the Products. Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this catalog or individual specification. INFORMATION ON THE GENERAL CATALOG REMINDERS ■ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is available. ■ Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. ■ All electronic components or functional modules listed in this catalog are developed, designed and intended for use in general electronics equipment.(for AV, office automation, household, office supply, information service, telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance. Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, submarine system, military, etc. where higher safety and reliability are especially required. In addition, even electronic components or functional modules that are used for the general electronic equipment, if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliability evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to install a protective circuit is strongly recommended at customer's design stage. ■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distributors (so called“TAIYO YUDEN’s official sales channel”). It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel. ■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights. ■ Caution for export Certain items in this catalog may require specific procedures for export according to“Foreign Exchange and Foreign Trade Control Law”of Japan,“U.S. Export Administration Regulations” , and other applicable regulations. Should you have any question or inquiry on this matter, please contact our sales staff. Should you have any question or inquiry on this matter, please contact our sales staff. ！ 当社カタログをご使用の際には 「当社製品に関するお断り」を必ずお読みください。 △ 9 ！ Please read the "Notice for TAIYO YUDEN products" before using this catalog. △ 3 積層チップNTCサーミスタ MULTILAYER CHIP NTC THERMISTORS OPERATING TEMP. ー55∼＋125℃ ＊1005TYPEを除く ＊Except for 1005TYPE 特長 FEATURES ・125℃保証 ・B定数が大きく温度検知能力が優れている ・表裏の区別がなくバルク、テーピングでの自動装着が可能 ・寸法はEIAJ規格に準拠 ・内部電極構造を採用することにより、信頼性向上を実現しています ・Guaranteed up to 125℃. ・Large B constant for higher temperature sensing capability. ・Ideal for automatic mounting in bulk or from tapes because of front-rear symmetry. ・Available in a standard EIA compatible case size. ・Improved reliability due to use of internal electrodes. 用途 APPLICATIONS ・Telecommunications equipment：mobile telephones,cellular telephones, cordless telephones, etc. ・Office automation：printers, facsimiles, word processors, etc. ・Consumer electronics ： VCRs, color television sets, LCD television sets, CD players, etc. ・Battery protection circuit ・通信機用 自動車電話、携帯電話、コードレス電話ほか ・OA機器用 プリンタ、ファクシミリ、ワードプロセッサほか ・民生機器用 ビデオ、カラーテレビ、液晶テレビ、CDプレーヤほか ・バッテリ保護回路用 形名表記法 ORDERING CODE 9 1 3 5 7 形式 寸法［mm］ 公称零負荷抵抗［Ω］ 公称B定数［K］ TB S0 S1 NTCサーミスタ 例 102 154 1.0×0.5（0402） 1.6×0.8（0603） 2 形状 メッキ電極品 P 4 包装 紙テーピング 単品（袋づめ） R S 1000 150000 例 295 410 ー55 5 10 最高温度［℃］ 6 8 抵抗許容差［％］ B定数許容差［％］ F G H J K 最低温度［℃］ 記号×10 2950 4100 ± 1 ± 2 ± 3 ± 5 ±10   Q ±1 ±3 F H 125 11 当社管理記号 △ 標準品     △＝スペース T B P S 1 S 1 0 3 K 4 4 0 H 5 Q ○ 1 2 3 4 6 7 8 3 5 7 Dimension ［mm］ Nominal Zero-Power Resistance［Ω］ Nominal B constant［K］ 2 1.0×0.5（0402） 1.6×0.8（0603） 4 Shape P S0 S1 NTC THERMISTOR Plated terminal Packaging R S Tape&Reel Bulk ！ 当社カタログをご使用の際には 「当社製品に関するお断り」を必ずお読みください。 △ example 102 154 1000 150000 example 295 410 Symbol×10 2950 4100 8 Resistance tolerance［％］ B constant tolerance［％］ ± 1 ± 2 ± 3 ± 5 ±10 10 11 Min. temperature ［℃］ ー55 5 10 Max. temperature ［℃］ 6 F G H J K 9 9 1 Type TB 472 5 F H ±1 ±3   Q 125 11 Internal code △ Standard product     △＝Blank space ！ Please read the "Notice for TAIYO YUDEN products" before using this catalog. △ 外形寸法 EXTERNAL DIMENSIONS Type 1005（0402） 1608（0603） L 1.0±0.05 W 0.5±0.05 T 0.5±0.05 e 0.25±0.10 （0.039±0.002） （0.020±0.002） （0.020±0.002） （0.010±0.004） 1.6±0.15 0.8±0.15 0.8±0.15 0.35±0.25 （0.063±0.006） （0.031±0.006） （0.031±0.006） （0.014±0.010） Unit：mm（Inch） R-T特性図 R-T CHARACTERISTICS 1005type（0402） 1608type（0603） k k k 9 k k THERMISTORS k k k k k k k k k k k k k k k k k k k k k k k k k k k k 仕様 SPECIFICATIONS 許容差（記号）Tolerance（Symbols） ±1% （F）, ±2% （G）, ±3% （H）, ±5% （J） , ±10% （K） R25 B定数 ±1% （F） , ±3%（H） B Constant セレクションガイド Selection Guide P.16 アイテム一覧 Part Numbers P.474 特性図 Electrical Characteristics P.475 梱包 Packaging P.476 信頼性 Reliability Data P.478 使用上の注意 Precautions ※ ※営業窓口に御相談ください。Please contact our Sales Department. etc ！ 当社カタログをご使用の際には 「当社製品に関するお断り」を必ずお読みください。 ！ Please read the "Notice for TAIYO YUDEN products" before using this catalog. △ △ 473 アイテム一覧 PART NUMBERS 1005TYPE 形 名 Ordering Code EHS （Environmental Hazardous Substances） B定数 R25 [kΩ] 熱時定数 B constant （K：25/85℃） （K：25/50℃） constant T B P S 0 ○ 2 2 2△4 1 0 H 5 Q RoHS 2.2 4100 4034 T B P S 0 ○ 3 3 2△4 1 0 H 5 Q RoHS 3.3 4100 4034 T B P S 0 ○ 4 7 2△4 1 0 H 5 Q RoHS 4.7 4100 4034 T B P S 0 ○ 6 8 2△4 1 0 H 5 Q RoHS 6.8 4100 4034 T B P S 0 ○ 1 0 3△4 1 0 H 5 Q RoHS 10 4100 4034 T B P S 0 ○ 1 5 3△4 1 0 H 5 Q RoHS 15 4100 4034 T B P S 0 ○ 2 2 3△4 4 0 H 5 Q RoHS 22 4400 4336 T B P S 0 ○ 3 3 3△4 5 5 H 5 Q RoHS 33 4550 4483 T B P S 0 ○ 4 7 3△4 5 5 H 5 Q RoHS 47 4550 4483 T B P S 0 ○ 6 8 3△4 5 5 H 5 Q RoHS 68 4550 4483 T B P S 0 ○ 1 0 4△4 5 5 H 5 Q RoHS 100 4550 4483 T B P S 0 ○ 1 5 4△4 5 5 H 5 Q RoHS 150 4550 4483 熱放散定数 Thermal time Dissipation ≦3 sec factor 0.5∼2.0 mW/℃ 定格電力 備 考 Rated Power Remark 35mW 形名の○には包装（R＝テーピング、S＝単品） 、△には抵抗許容差記号（J,K）が入ります。 ○Please specify the packaging code（R：tape & reel, S：Bulk） and △ the resistance tolerance code（J, K） . 1608TYPE 形 名 Ordering Code EHS （Environmental Hazardous Substances） B定数 R25 熱時定数 B constant [kΩ] （K：25/85℃） （K：25/50℃） T B P S 1 ○ 4 7 0△2 9 5 H 5 Q RoHS 0.047 2950 2934 T B P S 1 ○ 6 8 0△2 9 5 H 5 Q RoHS 0.068 2950 2934 T B P S 1 ○ 1 0 1△3 1 5 H 5 Q RoHS 0.100 3150 3157 T B P S 1 ○ 1 5 1△3 1 5 H 5 Q RoHS 0.150 3150 3157 T B P S 1 ○ 2 2 1△4 1 0 H 5 Q RoHS 0.22 4100 4034 T B P S 1 ○ 3 3 1△4 1 0 H 5 Q RoHS 0.33 4100 4034 T B P S 1 ○ 4 7 1△4 1 0 H 5 Q RoHS 0.47 4100 4034 T B P S 1 ○ 6 8 1△4 1 0 H 5 Q RoHS 0.68 4100 4034 T B P S 1 ○ 1 0 2△4 1 0 H 5 Q RoHS 1.0 4100 4034 T B P S 1 ○ 1 5 2△4 1 0 H 5 Q RoHS 1.5 4100 4034 T B P S 1 ○ 2 2 2△4 1 0 H 5 Q RoHS 2.2 4100 4034 T B P S 1 ○ 3 3 2△4 1 0 H 5 Q RoHS 3.3 4100 4034 T B P S 1 ○ 4 7 2△4 4 0 H 5 Q RoHS 4.7 4400 4336 T B P S 1 ○ 6 8 2△4 4 0 H 5 Q RoHS 6.8 4400 4336 T B P S 1 ○ 1 0 3△4 4 0 H 5 Q RoHS 10 4400 4336 T B P S 1 ○ 1 5 3△4 6 0 H 5 Q RoHS 15 4600 4533 T B P S 1 ○ 2 2 3△4 6 0 H 5 Q RoHS 22 4600 4533 T B P S 1 ○ 3 3 3△4 6 0 H 5 Q RoHS 33 4600 4533 T B P S 1 ○ 4 7 3△4 7 5 H 5 Q RoHS 47 4750 4642 T B P S 1 ○ 6 8 3△4 7 5 H 5 Q RoHS 68 4750 4642 T B P S 1 ○ 1 0 4△4 7 5 H 5 Q RoHS 100 4750 4642 T B P S 1 ○ 1 5 4△4 7 5 H 5 Q RoHS 150 4750 4642 T B P S 1 ○ 1 0 3△3 4 4 F 5 Q RoHS 10 3435 3395 熱放散定数 Thermal time Dissipation constant ≦5 sec factor 1.0∼2.5 mW/℃ 定格電力 備 考 Rated Power Remark 63mW 形名の○には包装（R＝テーピング、S＝単品） 、△には抵抗値許容差記号（J, K（TBP S1 ○ 103 △ 344 F 5QはF,GまたはH） ） が入ります。 ○Please specify the packaging code（R：tape & reel, S：Bulk） and △ the resistance tolerance code（F,G or H for TBP S1 ○ 103 △ 344 F 5Q J, K for  other part numbers） . 474 ！ 当社カタログをご使用の際には 「当社製品に関するお断り」を必ずお読みください。 △ ！ Please read the "Notice for TAIYO YUDEN products" before using this catalog. △ 特性図 ELECTRICAL CHARACTERISTICS 1005type（0402） 高温放置 High Temperature Life Test 試験条件 Test Condition 125℃ 耐湿性 Damp Heat（steady state） 試験条件 Test Condition 85℃95% 9 THERMISTORS 1608type（0603） 高温放置 High Temperature Life Test 試験条件 Test Condition 125℃ 耐湿性 Damp Heat（steady state） 試験条件 Test Condition 85℃95% ！ 当社カタログをご使用の際には 「当社製品に関するお断り」を必ずお読みください。 △ ！ Please read the "Notice for TAIYO YUDEN products" before using this catalog. △ 475 梱包 PACKAGING ④リーダー部・空部 Leader and Blank portion ①最小受注単位数 Minimum Quantity 形 式 1005（0402） 製品厚み Thickness ［mm］ 0.5（0.020） 1608（0603） 0.8（0.031） Type 標準数量 Standard quantity［pcs］ 袋づめ Bulk 紙テープ Taping 10000 10000 2000 4000 ②テーピング材質 Tape material 160mm以上 （6.3inches or more） 100mm以上 （3.94inches or more） 引き出し方向 Direction of tape feed 400mm以上 （15.7inches or more） ⑤リール寸法 Reel size 2.0±0.5 （0.079±0.031） φ13.0±0.2 （0.512±0.020） Unit：mm（Inch） ③テーピング寸法 Taping Dimensions ⑥トップテープ強度 Top Tape Strength 紙テープ（8mm幅） Paper tape（0.315inches wide） トップテープのはがし力は下図矢印方向にて0.1∼0.7Nとなります。 The top tape requires a peel;-off force of 0.1∼0.7N in the direction of the arrow as illustrated below. 形 式 Type 1005（0402） 1608（0603） チップ挿入部 挿入ピッチ テープ厚み Insertion pitch Tape thickness Chip cavity A B F T 0.65±0.1 1.15±0.1 2.0±0.05 0.8max （0.026±0.004）（0.045±0.004）（0.079±0.002）（0.031max） 1.0±0.2 1.8±0.2 4.0±0.1 1.1max （0.039±0.008）（0.071±0.008）（0.157±0.004）（0.043max） Unit：mm（Inch） 476 ！ 当社カタログをご使用の際には 「当社製品に関するお断り」を必ずお読みください。 △ ！ Please read the "Notice for TAIYO YUDEN products" before using this catalog. △ 1/2 RELIABILITY DATA  MULTILAYER CHIP NTC THERMISTORS Specified Value Test Methods and Remarks Item 1005（0402） 1. Operating Temperature Range ー55 to ＋125℃ 2. Storage Temperature Range ー55 to ＋125℃ 3. Rated Power 4. Nominal Zero-Power Resistance 5. Nominal B Constant 6. Dissipation Constant（single unit） 35mW 63mW 0.047∼150kΩ Ambient temperature：25±0.2℃ ±5％ ±5％ Measuring electric power：0.1mW max. ±10％ ±10％ 4100∼4550K 2950∼4750K ±3％ ±3％ 0.5 to 2.0mW／℃ 1.0 to 2.5mW／℃ This represents the amount of electric power required to raise the temperature of the element by 1℃ through self-heating under thermal equilibrium. Within 5 sec. This represents the amount of time for the temperature of the thermistor element to change by 63.2％ of the difference between the initial temperature and the ambient temperature by the drastic change of power application into thermistor from non-zero-power to zero-power state. 2.2∼150kΩ Within 3 sec. 8. Rated Ambient Temperature Measure the resistance at the ambient temperatures of 25±0.2℃ and ＋85±0.2℃. This represents the maximum ambient temperature at which rated power could be applied. 25℃ This represents the relations between the ambient temperature and the maximum permissible power. 9. Electric Power Derating Curve As shown in the figure at right. 10. Resistance to Flexure of Substrate R25 change：Within ±3％ R25 change：Within ±5％ Warp：2mm B constant change： B constant change： Testing board：glass-epoxy-resin substrate Within ±1％ Within ±2％ 9 THERMISTORS 7. Thermal Time Constant（single unit） 1608（0603） Board thickness：0.8mm Pressing speed：0.5mm／sec. Duration：30 sec. 11. Adhesion of Terminal Electrode R25 change：Within ±3％ R25 change：Within ±5％ Applied force：5N B constant change： B constant change： Duration：10sec. Within ±1％ ！ 当社カタログをご使用の際には 「当社製品に関するお断り」を必ずお読みください。 △ Within ±2％ ！ Please read the "Notice for TAIYO YUDEN products" before using this catalog. △ 479 2/2 RELIABILITY DATA  MULTILAYER CHIP NTC THERMISTORS Specified Value Item 1005（0402） 12. Solderability 13. Resistance to Soldering Test Methods and Remarks 1608（0603） At least 75% of terminal At least 80% of terminal According to JIS C5102 clause 8.4. electrode is covered by new electrode is covered by new Solder temperature：230±5℃ solder. solder. Duration：4±1 sec. R25 change：Within ±3％ R25 change：Within ±5％ Reflow soldering： B constant change： B constant change： Solder temperature：240℃ Within ±1％ Within ±2％ Duration：5 sec. Preheating temperature：150℃ Preheating time：90 sec. Number of reflows：3 times testing substrate：glass-epoxy-resin substrate 14. Thermal Shock R25 change：Within ±3％ R25 change：Within ±5％ Conditions for 1 cycle B Constant change： B Constant change： Step1：Minimum operating temperature ＋0／ー3℃ 30±3 min Within ±1％ Within ±3％ Step2：Room temperature 2 to 3 min Step3：Maximum operating temperature ＋0／ー3℃ 30±3 min Step4：Room temperature 2 to 3 min Number of cycles：5 15. High Temperature Life Test R25 change：Within ±3％ R25 change：Within ±5％ Temperature：125±2℃ B Constant change： B Constant change： Duration：1000±12 hrs Within ±1％ Within ±3％ Recovery：2 hrs of recovery under the standard condition after the removal from test chamber. testing substrate：glass-epoxy-resin substrate 16. Damp Heat（steady state） R25 change：Within ±3％ R25 change：Within ±5％ Temperature：85±2℃ B Constant change： B Constant change： Humidity：85±5％RH Within ±1％ Within ±3％ THERMISTORS Recovery：2 to 3 hrs of recovery under the standard condition after the test. 9 Duration：1000±12 hrs Recovery：2 hrs of recovery under the standard condition after the removal from test chamber. testing substrate：glass-epoxy-resin substrate Note on standard condition："standard condition" referred to herein is defined as follows： 5 to 35℃ of temperature, 45 to 85％ relative humidity and 86 to 106kPa of air pressure. When there are questions concerning measurement results： In order to provide correlation data, the test shall be conducted under condition of 20±2℃ of temperature, 60 to 70％ relative humidity and 86 to 106kPa of air pressure. Unless otherwise specified, all the tests are conducted under the "standard condition." ！ 当社カタログをご使用の際には 「当社製品に関するお断り」を必ずお読みください。 △ ！ Please read the "Notice for TAIYO YUDEN products" before using this catalog. △ 481