Notice for TAIYO YUDEN products
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2011. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this catalog or individual
specification.
■ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is
available.
■ Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■ All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, submarine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliability evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distributors (so called“TAIYO YUDEN’
s official sales channel”).
It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel.
■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of
products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to“Foreign Exchange and Foreign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
12
notice_e-01
STANDARD MULTILAYER CERAMIC CAPACITORS
(TEMPERATURE COMPENSATING TYPE)
REFLOW
■ FEATURES
■ APPLICATIONS
◦ Improved higher density mounting.
◦ General electronic equipment
◦ Monolithic structure provides higher reliability.
◦ Communication equipment
(cellular phone, wireless applications, etc.)
◦A wide range of capacitance values available in standard case sizes.
■ PART NUMBER
U M K
❶
❷
0
❸
❶Rated voltage
〔VDC〕
E
16
T
25
U
50
M
1
K
❷Series name
Multilayer ceramic
capacitor
5 △ C H
❹
❺
❸End termination
Plated
❹Dimension
Type (inch) L×W
〔mm〕
042 (01005) 0.4×0.2
063 (0201) 0.6×0.3
105 (0402) 1.0×0.5
1
0
❻
1
❼
❻Temperature characteristics〔ppm/℃〕
C□:0
CH、CJ、CK
Tolerance
R□:-220 RH
H:±60
S□:-330 SH、SJ、SK
J:±120
T□:-470 TJ、TK
K:±250
U□:-750 UJ、UK
SL:+350~-1000
□=Tolerance
V - F △
❽
❾
❽Capacitance
tolerance
C
±0.25pF
D
±0.5pF
F
±1pF
J
±5%
K
±10%
❼Nominal capacitance
〔pF〕
example
0R5
0.5
010
1
100
10
※R=decimal point
❺Dimension tolerance
△
Standard
△=Blank space
J
❿
⓫
⓬
❿Special code
- Standard
⓫Packaging
φ178mm Taping
(2mm pitch)
φ178mm Taping
W (1mm pitch, 042 Type)
F
❾Thickness〔mm〕
C,D
0.2
T
0.3
0.5
V, W
⓬Internal code
△
Standard
△=Blank space
■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY
Dimension [mm]
Type
□MK042
(01005 inch)
□MK063
(0201 inch)
□MK105
(0402 inch)
T
e
Standard quantity [pcs]
Paper tape
Embossed tape
L
W
0.4±0.02
0.2±0.02
0.2±0.02
C,D
0.1±0.03
-
40000
0.6±0.03
0.3±0.03
0.3±0.03
T
0.15±0.05
15000
-
1.0±0.05
0.5±0.05
0.5±0.05
V,W
0.25±0.10
10000
-
■ AVAILABLE CAPACITANCE RANGE
Cap
[pF]
Type
042
C□
063
C□
105
U□
VDC
16V
50V
25V
[3-digit]
0.5
0R5
1
010
1.5
1R5
2
020
3
030
4
040
5
050
D
T
6
060
7
070
8
080
9
090
10
100
T
12
120
15
150
18
180
22
220
27
270
33
330
39
390
C
47
470
56
560
68
680
82
820
100
101
120
121
150
151
180
181
220
221
270
271
330
331
390
391
470
471
560
561
680
681
820
821
1000
102
Note: Letters in the table indicate thickness.
C□
U□
SL
R□
S□
T□
W
W
50V
W
V
V
V
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
16
12
mlcc02_e-01
■ REPRESENTATIVE PART NUMBERS
●042TYPE
Class1【C△ characteristic】
Rated
voltage
Part number 1
16V
Part number 2
Capacitance
〔pF〕
Capacitance
tolerance
Q
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
CK
CK
CK
CK
CJ
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
0.5
1
1.5
2
3
4
5
6
7
8
9
10
12
15
18
22
27
33
39
47
56
68
82
100
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
410
420
430
440
460
480
500
520
540
560
580
600
640
700
760
840
940
1000
1000
1000
1000
1000
1000
1000
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
Internal
code
(P/N 1)
Note
Internal
code
(P/N 1)
Note
Internal
code
(P/N 1)
Note
CAPACITORS
EMK042 CK0R5CD
EMK042 CK010CD
EMK042 CK1R5CD
EMK042 CK020CD
EMK042 CJ030CD
EMK042 CH040CD
EMK042 CH050CD
EMK042 CH060DD
EMK042 CH070DD
EMK042 CH080DD
EMK042 CH090DD
EMK042 CH100DD
EMK042 CH120JD
EMK042 CH150JD
EMK042 CH180JC
EMK042 CH220JC
EMK042 CH270JC
EMK042 CH330JC
EMK042 CH390JC
EMK042 CH470JC
EMK042 CH560JC
EMK042 CH680JC
EMK042 CH820JC
EMK042 CH101JC
Temp.
char.
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
●063TYPE
Class1【C△ characteristic】
Rated
voltage
50V
Part number 1
Part number 2
UMK063 CK0R5CT
UMK063 CK010CT
UMK063 CK1R5CT
UMK063 CK020CT
UMK063 CJ030CT
UMK063 CH040CT
UMK063 CH050CT
UMK063 CH060DT
UMK063 CH070DT
UMK063 CH080DT
UMK063 CH090DT
UMK063 CH100DT
UMK063 CH120JT
UMK063 CH150JT
UMK063 CH180JT
UMK063 CH220JT
UMK063 CH270JT
UMK063 CH330JT
UMK063 CH390JT
UMK063 CH470JT
UMK063 CH560JT
UMK063 CH680JT
UMK063 CH820JT
UMK063 CH101JT
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
Q
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
CK
CK
CK
CK
CJ
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
0.5
1
1.5
2
3
4
5
6
7
8
9
10
12
15
18
22
27
33
39
47
56
68
82
100
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
410
420
430
440
460
480
500
520
540
560
580
600
640
700
760
840
940
1000
1000
1000
1000
1000
1000
1000
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
Class1【U△ characteristic】
Rated
voltage
25V
Part number 1
TMK063 UK0R5CT
TMK063 UK010CT
TMK063 UK1R5CT
TMK063 UK020CT
TMK063 UK030CT
TMK063 UJ040CT
TMK063 UJ050CT
TMK063 UJ060DT
TMK063 UJ070DT
TMK063 UJ080DT
TMK063 UJ090DT
TMK063 UJ100DT
TMK063 UJ120JT
TMK063 UJ150JT
Part number 2
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
Q
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
UK
UK
UK
UK
UK
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
0.5
1
1.5
2
3
4
5
6
7
8
9
10
12
15
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5%
±5%
410
420
430
440
460
480
500
520
540
560
580
600
640
700
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
R
R
R
R
R
R
R
R
R
R
R
R
R
R
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc02_e-01
12
17
■ REPRESENTATIVE PART NUMBERS
●105TYPE
Class1【C△ characteristic】
Rated
voltage
50V
Part number 1
Part number 2
UMK105 CK0R5CV
UMK105 CK010CV
UMK105 CK1R5CV
UMK105 CK020CV
UMK105 CJ030CV
UMK105 CH040CV
UMK105 CH050CV
UMK105 CH060DV
UMK105 CH070DV
UMK105 CH080DV
UMK105 CH090DV
UMK105 CH100DV
UMK105 CH120JV
UMK105 CH150JV
UMK105 CH180JV
UMK105 CH220JV
UMK105 CH270JV
UMK105 CH330JV
UMK105 CH390JV
UMK105 CH470JV
UMK105 CH560JV
UMK105 CH680JV
UMK105 CH820JV
UMK105 CH101JV
UMK105 CH121JV
UMK105 CH151JV
UMK105 CH181JV
UMK105 CH221JV
UMK105 CH271JV
UMK105 CH331JV
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
Q
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
CK
CK
CK
CK
CJ
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
0.5
1
1.5
2
3
4
5
6
7
8
9
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
410
420
430
440
460
480
500
520
540
560
580
600
640
700
760
840
940
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
Internal
code
(P/N 1)
Note
Internal
code
(P/N 1)
Note
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
Class1【U△ characteristic】
Rated
voltage
50V
Part number 1
UMK105 UK0R5CV
UMK105 UK010CV
UMK105 UK1R5CV
UMK105 UK020CV
UMK105 UK030CV
UMK105 UJ040CV
UMK105 UJ050CV
UMK105 UJ060DV
UMK105 UJ070DV
UMK105 UJ080DV
UMK105 UJ090DV
UMK105 UJ100DV
UMK105 UJ120JV
UMK105 UJ150JV
UMK105 UJ180JV
UMK105 UJ220JV
UMK105 UJ270JV
UMK105 UJ330JV
UMK105 UJ390JV
UMK105 UJ470JV
UMK105 UJ560JV
UMK105 UJ680JV
UMK105 UJ820JV
UMK105 UJ101JV
UMK105 UJ121JV
UMK105 UJ151JV
UMK105 UJ181JV
UMK105 UJ221JV
UMK105 UJ271JV
UMK105 UJ331JV
Part number 2
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
Q
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
UK
UK
UK
UK
UK
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
0.5
1
1.5
2
3
4
5
6
7
8
9
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
410
420
430
440
460
480
500
520
540
560
580
600
640
700
760
840
940
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
18
12
mlcc02_e-01
■ REPRESENTATIVE PART NUMBERS
Class1【SL characteristic】
Rated
voltage
Part number 1
50V
Part number 2
UMK105 SL121JV
UMK105 SL151JV
UMK105 SL181JV
UMK105 SL221JV
UMK105 SL271JV
UMK105 SL331JV
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
Q
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
SL
SL
SL
SL
SL
SL
120
150
180
220
270
330
±5%
±5%
±5%
±5%
±5%
±5%
1000
1000
1000
1000
1000
1000
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
Internal
code
(P/N 1)
Note
Internal
code
(P/N 1)
Note
Internal
code
(P/N 1)
Note
Internal
code
(P/N 1)
Note
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
Class1【RH characteristic】
50V
Part number 1
Part number 2
UMK105 RH5R6JW
UMK105 RH6R8JW
UMK105 RH8R2JW
UMK105 RH100JW
UMK105 RH120JW
UMK105 RH150JW
UMK105 RH180JW
UMK105 RH200JW
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
Q
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
RH
RH
RH
RH
RH
RH
RH
RH
5.6
6.8
8.2
10
12
15
18
20
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
512
536
564
600
640
700
760
800
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
CAPACITORS
Rated
voltage
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
Class1【S△ characteristic】
Rated
voltage
50V
Part number 1
Part number 2
UMK105 SK0R5BW
UMK105 SK010BW
UMK105 SK1R2BW
UMK105 SK1R5BW
UMK105 SK1R8BW
UMK105 SK2R2JW
UMK105 SK2R7JW
UMK105 SJ3R3JW
UMK105 SJ3R9JW
UMK105 SH4R7JW
UMK105 SH5R6JW
UMK105 SH6R8JW
UMK105 SH8R2JW
UMK105 SH100JW
UMK105 SH120JW
UMK105 SH150JW
UMK105 SH180JW
UMK105 SH200JW
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
Q
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
SK
SK
SK
SK
SK
SK
SK
SJ
SJ
SH
SH
SH
SH
SH
SH
SH
SH
SH
0.5
1
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
20
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
410
420
424
430
436
444
454
466
478
494
512
536
564
600
640
700
760
800
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
Class1【T△ characteristic】
Rated
voltage
50V
Part number 1
UMK105 TK0R5BW
UMK105 TK010BW
UMK105 TK1R2BW
UMK105 TK1R5BW
UMK105 TK1R8BW
UMK105 TK2R2JW
UMK105 TK2R7JW
UMK105 TK3R3JW
UMK105 TK3R9JW
UMK105 TJ4R7JW
UMK105 TJ5R6JW
UMK105 TJ6R8JW
UMK105 TJ8R2JW
UMK105 TJ100JW
UMK105 TJ120JW
UMK105 TJ150JW
UMK105 TJ180JW
UMK105 TJ200JW
Part number 2
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
Q
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
TK
TK
TK
TK
TK
TK
TK
TK
TK
TJ
TJ
TJ
TJ
TJ
TJ
TJ
TJ
TJ
0.5
1
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
20
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
410
420
424
430
436
444
454
466
478
494
512
536
564
600
640
700
760
800
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc02_e-01
12
19
■ PACKAGING
①Minimum Quantity
◦Taped package
Thickness
Type
□MK042
□MK063
□2K096
□WK105
□MK105
□VK105
□MK107
□WK107
□2K110
□MK212
□WK212
□4K212
□2K212
□MK316
□MK325
□MK432
mm
code
0.2
0.3
0.3
0.45
0.3
0.2
0.3
0.5
0.5
0.45
0.5
0.8
0.5
0.6
0.8
0.45
0.85
1.25
0.85
0.85
0.85
1.15
1.25
1.6
0.85
1.15
1.9
2.0max
2.5
2.5
C,D
P,T
P
K
P
C
P
V, W
W
K
V
A
V
B
A
K
D
G
D
D
D
F
G
L
D
F
N
Y
M
M
Standard quantity [pcs]
Embossed
tape
—
40000
15000
③Representative taping dimensions
◦Paper Tape(8mm wide)
◦Pressed carrier tape(2mm pitch)
㧗0.1/−0
Paper tape
10000
20000
15000
—
T1
10000
4000
—
4000
Unit:mm
4000
—
—
3000
4000
—
Type
※No bottom tape for pressed carrier tape
Insertion Pitch
F
□MK063
□2K096
□WK105
MK105
(*1C)
0.65
1.15
MK105
(*1P)
1
* Thickness, C:0.2mm、P:0.3mm
Tape Thickness
T
T1
0.45max.
0.42max.
0.4max.
0.45max.
0.3max.
0.42max.
2.0±0.05
◦Punched carrier tape(2mm pitch)
㧗0.1/−0
—
3000
2000
—
—
500(T), 1000(P)
500
Unit:mm
Type
②Taping material
Chip Cavity
A
B
0.37
0.67
0.65
1.02
□2K096
□MK105
□VK105
Chip Cavity
A
B
0.72
1.02
0.65
Insertion Pitch
F
Tape Thickness
T
0.6max.
52.0±0.05
1.15
0.8max.
◦Paper tape
◦Punched carrier tape(4mm pitch)
㧗0.1/−0
Unit:mm
◦Embossed tape
Type
□MK107
□WK107
□2K110
□MK212
□WK212
□4K212
□2K212
□MK316
Chip Cavity
A
B
Insertion Pitch
F
Tape Thickness
T
1.0
1.8
1.1max.
1.15
1.55
1.0max.
1.65
2.4
2.0
3.6
4.0±0.1
1.1max.
◦Chip filled
Note:Taping size might be different depending on the size of the product.
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_pack-P1
12
mlcc_pack_e-01
■ PACKAGING
◦Embossed tape(4mm wide)
④Trailer and Leader
0.8±0.04
4.0±0.05
1.8±0.02
0.9±0.05
100mm or more
Trailer 160mm min.
Leader 400mm min.
F
1.0±0.02
2.0±0.04
Unit:mm
Type
□MK042
Chip Cavity
A
B
0.23
0.43
Insertion Pitch
F
1.0±0.02
Tape Thickness
K
T
0.5max.
0.25max.
⑤Reel size
t
E
C
◦Embossed tape(8mm wide)
㧗0.1/−0
A
B
D
R
W
Unit:mm
A
φ178±2.0
B
φ50min.
C
φ13.0±0.2
D
φ21.0±0.8
E
2.0±0.5
R
1.0
4mm wide tape
8mm wide tape
12mm wide tape
t
1.5max.
2.5max.
2.5max.
W
5±1.0
10±1.5
14±1.5
Unit:mm
Type
□WK107
□MK212
□MK316
□MK325
Chip Cavity
A
B
1.0
1.8
1.65
2.4
2.0
3.6
2.8
3.6
Insertion Pitch
F
4.0±0.1
Tape Thickness
K
T
1.3max
0.25±0.1
3.4max.
0.6max.
◦Embossed tape(12mm wide)
⑥Top Tape Strength
㧗0.1/−0
The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the arrow
as illustrated below.
2.0±0.1
F
Type
□MK432
Chip Cavity
A
B
3.7
4.9
Unit:mm
Insertion Pitch
F
8.0±0.1
Tape Thickness
K
T
4.0max.
0.6max.
⑦Bulk Cassette
The exchange of individual specification is necessary.
Please contact Taiyo Yuden sales channels.
12±0.1
36+0/−0.2
110±0.7
8.8±0.1
2.0+0/−0.1
1.5+0.1/−0
6.8±0.1
12.0±0.1
+0/−0.2
+0.2/−0
1.0+0/−0.1
Unit:mm
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_pack_e-01
12
mlcc_pack-P2
■ RELIABILITY DATA
Super Low Distortion Multilayer Ceramic Capacitors and Medium-High
Voltage Multilayer Ceramic Capacitors are noted separately.
Multilayer Ceramic Capacitors
1.Operating Temperature Range
Temperature Compensating
(Class 1)
Specified
Value
Standard
High Frequency Type
-55 to +125℃
BJ
B7
C6
C7
High Permittivity(Class 2)
F
Specification
B
X5R
X7R
X6S
X7S
F
Y5V
Temperature Range
-25 to +85℃
-55 to +85℃
-55 to +125℃
-55 to +105℃
-55 to +125℃
-25 to +85℃
-30 to +85℃
2. Storage Conditions
Temperature Compensating
(Class 1)
Specified
Value
Standard
High Frequency Type
-55 to +125℃
BJ
B7
C6
C7
High Permittivity(Class 2)
F
Specification
B
X5R
X7R
X6S
X7S
F
Y5V
Temperature Range
-25 to +85℃
-55 to +85℃
-55 to +125℃
-55 to +105℃
-55 to +125℃
-25 to +85℃
-30 to +85℃
3. Rated Voltage
Temperature Compensating
Specified(Class 1)
Value
High Permittivity(Class 2)
Standard
High Frequency Type
4. Withstanding Voltage
(Between terminals)
Standard
Temperature Compensating
Specified(Class 1)
High Frequency Type
Value
High Permittivity
(Class 2)
【Test Methods and Remarks】
Applied voltage
Duration
Charge/discharge current
50VDC, 25VDC, 16VDC
50VDC, 16VDC
50VDC, 35VDC, 25VDC, 16VDC, 10VDC, 6.3VDC, 4VDC
No breakdown or damage
Class 1
Class 2
Rated voltage×3 Rated voltage×2.5
1 to 5 sec.
50mA max.
5. Insulation Resistance
Standard
Temperature Compensating
High Frequency Type
Specified(Class 1)
Value
High Permittivity(Class 2)Note 1
10000 MΩ min.
C≦0.047μF : 10000 MΩ min.
C>0.047μF : 500MΩ・μF
【Test Methods and Remarks】
Applied voltage: Rated voltage
Duration: 60±5 sec.
Charge/discharge current: 50mA max.
6. Capacitance(Tolerance)
Standard
Temperature Compensating
Specified(Class 1)
Value
High Frequency Type
High Permittivity(Class 2)
【Test Methods and Remarks】
Standard
Preconditioning
Measuring frequency
Measuring voltage Note 1
Bias application
C△
U△
0.5pF≦C≦5pF:±0.25pF
0.5pF