BAV19WS

TAK CHEONG ® SEMICONDUCTOR 200mW SOD-323 SURFACE MOUNT Small Outline Flat Lead Plastic Package High Voltage Switching Diode Absolute Maximum Ratings Symbol PD VRRM TSTG TJ IF (AV) IFSM Power Dissipation TA = 25°C unless otherwise noted Value 200 250 -65 to +150 +150 200 1.0 4.0 Units mW V °C °C mA A A Parameter Maximum Repetitive Reverse Voltage Storage Temperature Range Operating Junction Temperature Average Rectified Forward Current Non-repetitive Peak Forward Current Pulse Width = 1.0 Second Pulse Width = 1.0 µsecond These ratings are limiting values above which the serviceability of the diode may be impaired. Specification Features: Flat Lead SOD-323 Small Outline Plastic Package Surface Device Type Mounting Moisture Sensitivity Level 1 RoHS Compliant Green EMC Matte Tin(Sn) Lead Finish Band Indicates Cathode DEVICE MARKING CODE: Device Type Device Marking BAV19WS S5 BAV20WS S6 BAV21WS S7 Electrical Characteristics Symbol BV Breakdown Voltage TA = 25°C unless otherwise noted Parameter BAV19WS BAV20WS BAV21WS Test Condition IR=100µA Limits Min 120 200 250 VR=100V VR=150V VR=200V IF=100mA IF=200mA ----------Max ------100 100 100 1.0 1.25 Volts Volts Volts nA nA nA Volts Volts Unit IR Reverse Leakage Current BAV19WS BAV20WS BAV21WS VF Forward Voltage TRR Reverse Recovery Time IF=IR=30mA RL=100Ω IRR=3mA --50 nS C Capacitance VR=0V, f=1MHZ --- 5.0 pF May 2008, Revision D Page 1 BAV19WS/BAV20WS/BAV21WS TAK CHEONG Typical Performance Characteristics ® SEMICONDUCTOR Total Capacitance Forward Voltage vs Ambient Temperature May 2008, Revision D Page 2 TAK CHEONG ® SEMICONDUCTOR Reverse Current vs Reverse VoltageReverse May 2008, Revision D Page 3 TAK CHEONG SOD-323 Package Outline ® SEMICONDUCTOR NOTE: The above package outline is similar to JEITA SC-90. This datasheet presents technical data of Tak Cheong’s Switching Diodes. Complete specifications for the individual devices are provided in the form of datasheets. A comprehensive Selector Guide is included to simplify the task of choosing the best set of components required for a specific application. For additional information, please visit our website http://www.takcheong.com. Although information in this datasheet has been carefully checked, no responsibility for the inaccuracies can be assumed by Tak Cheong. Please consult your nearest Tak Cheong’s sales office for further assistance. Tak Cheong reserves the right to make changes without further notice to any products herein to further improve reliability, function or design, cost and productivity. TAK CHEONG ® and are registered trademarks of Tak Cheong Electronics (Holdings) Co., Ltd. May 2008, Revision D Page 4