BZX79C160

® TAK CHEONG Licensed by ON Semiconductor, A trademark of semiconductor Components Industries, LLC for Zener Technology and Products. 500 mW DO-35 Hermetically Sealed Glass Zener Voltage Regulators AXIAL LEAD DO35 Maximum Ratings (Note 1) Rating Maximum Steady State Power Dissipation @TL≤75℃, Lead Length = 3/8” Derate Above 75℃ Operating and Storage Temperature Range TJ, Tstg 4.0 -65 to +200 mW/℃ °C L 79C xxx Symbol PD Value 500 Units mW Note 1: Some part number series have lower JEDEC registered ratings. Specification Features: Zener Voltage Range = 2.4V to 200V ESD Rating of Class 3 (>6 KV) per Human Body Model DO-35 Package (DO-204AH) Double Slug Type Construction Metallurgical Bonded Construction RoHS Compliant Solder Hot Dip Tin (Sn) Lead Finish L 79Cxxx = Logo = BZX79CxxxDevice Code Cathode Anode Specification Features: Case Finish : Double slug type, hermetically sealed glass : All external surfaces are corrosion resistant and leads are readily solderable Polarity : Cathode indicated by polarity band Mounting: Any ELECTRICAL CHARACTERIZATION (TA = 25°C unless otherwise noted) Zener Voltage (Note 3.) Device (Note 2.) Device Marking VZ (Volts) Min BZX79C110 BZX79C120 BZX79C130 BZX79C150 BZX79C160 BZX79C180 BZX79C200 79C110 79C120 79C130 79C150 79C160 79C180 79C200 104 114 124 138 153 168 188 Max 116 127 141 156 171 191 212 @IZT (mA) 1 1 1 1 1 1 1 Zener Impedance (Note 4.) ZZT @IZT (Ω) 650 800 950 1250 1400 1700 2000 Leakage Current IR @ VR (uA Max) 0.1 0.1 0.1 0.1 0.1 0.1 0.1 (Volts) 84 91 99 114 122 137 152 θVBR (mV/℃) Min 63 69 75 87 93 105 120 Max 131 144 158 185 200 228 255 C V Z = 0, F = 1.0MHZ (pF) 26 24 23 21 20 18 17 VF Forward Voltage =3.0V max @ IF = 100mA for all types Number: DB-078 Sep. 2010 / E Page 1 BZX79C110 through BZX79C200 Series ® TAK CHEONG Licensed by ON Semiconductor, A trademark of semiconductor Components Industries, LLC for Zener Technology and Products. 2. TOLERANCE AND VOLTAGE DESIGNATION The type numbers listed have zener voltage min/max limits as shown. 3. REVERSE ZENER VOLTAGE (VZ) Reverse zener voltage is measured under pulse conditions such that TJ is no more than 2℃ above TA. 4. ZENER IMPEDANCE (ZZ) DERIVATION ZZT is measured by dividing the AC voltage drop across the device by the AC current applied. The specified limits are for IZ(AC) = 0.1 IZ(DC) with AC frequency = 60Hz. Package Outline Case Outline DO-35 DIM Min Millimeters Max Min Inches Max A B C D 0.46 3.05 25.40 1.52 0.56 5.08 38.10 2.29 0.018 0.120 1.000 0.060 0.022 0.200 1.500 0.090 Note: all dimensions are within JEDEC standard. Number: DB-078 Sep. 2010 / E Page 2 TAK CHEONG ® D ISC LA I MER NOTIC E NOTICE The information presented in this document is for reference only. Tak Cheong reserves the right to make changes without notice for the specification of the products displayed herein. The product listed herein is designed to be used with ordinary electronic equipment or devices, and not designed to be used with equipment or devices which require high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), Tak Cheong Semiconductor Co., Ltd., or anyone on its behalf, assumes no responsibility or liability for any damagers resulting from such improper use of sale. This publication supersedes & replaces all information reviously supplied. For additional information, please visit our website http://www.takcheong.com, or consult your nearest Tak Cheong’s sales office for further assistance. Number: DB-100 April 14, 2008 / A