BZX85C47

® TAK CHEONG Licensed by ON Semiconductor, A trademark of semiconductor Components Industries, LLC for Zener Technology and Products. 1.3 Watt DO-41 Hermetically Sealed Glass Zener Voltage Regulators Maximum Ratings Rating Maximum Steady State Power Dissipation @TL≤50℃, Lead Length = 3/8” Derate Above 50℃ Operating and Storage Temperature Range TJ, Tstg 8.67 -65 to +200 mW/℃ °C L 85Cxxx Symbol PD Value 1.3 Units W L 85C xxx Specification Features: Zener Voltage Range = 3.3V to 100V ESD Rating of Class 3 (>6 KV) per Human Body Model DO-41 Package (DO-204AL) Double Slug Type Construction Metallurgical Bonded Construction Oxide Passivated Die RoHS Compliant Solder Hot Dip Tin (Sn) Lead Finish Cathode = Logo = Device Code Anode Specification Features: Case Finish : Double slug type, hermetically sealed glass : All external surfaces are corrosion resistant and leads are readily solderable Polarity : Cathode indicated by polarity band Mounting: Any November, 2006 / C Page 1 BZX85C3V3 through BZX85C100 Series ® TAK CHEONG ELECTRICAL CHARACTERISTICS (TA = 25℃ unless otherwise noted.) Zener Voltage (Note 2 & 3.) Device (Note 1.) Device Marking Min BZX85C3V3 BZX85C3V6 BZX85C3V9 BZX85C4V3 BZX85C4V7 BZX85C5V1 BZX85C5V6 BZX85C6V2 BZX85C6V8 BZX85C7V5 BZX85C8V2 BZX85C9V1 BZX85C10 BZX85C11 BZX85C12 BZX85C13 BZX85C15 BZX85C16 BZX85C18 BZX85C20 BZX85C22 BZX85C24 BZX85C27 BZX85C30 BZX85C33 BZX85C36 BZX85C39 BZX85C43 BZX85C47 BZX85C51 BZX85C56 BZX85C62 BZX85C68 BZX85C75 BZX85C82 BZX85C91 BZX85C100 BZX85C3V3 BZX85C3V6 BZX85C3V9 BZX85C4V3 BZX85C4V7 BZX85C5V1 BZX85C5V6 BZX85C6V2 BZX85C6V8 BZX85C7V5 BZX85C8V2 BZX85C9V1 BZX85C10 BZX85C11 BZX85C12 BZX85C13 BZX85C15 BZX85C16 BZX85C18 BZX85C20 BZX85C22 BZX85C24 BZX85C27 BZX85C30 BZX85C33 BZX85C36 BZX85C39 BZX85C43 BZX85C47 BZX85C51 BZX85C56 BZX85C62 BZX85C68 BZX85C75 BZX85C82 BZX85C91 BZX85C100 3.1 3.4 3.7 4.0 4.4 4.8 5.2 5.8 6.4 7.0 7.7 8.5 9.4 10.4 11.4 12.4 13.8 15.3 16.8 18.8 20.8 22.8 25.1 28.0 31.0 34 37 40 44 48 52 58 64 70 77 85 96 VZ (Volts) Nom 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 Max 3.5 3.8 4.1 4.6 5.0 5.4 6.0 6.6 7.2 7.9 8.7 9.6 10.6 11.6 12.7 14.1 15.6 17.1 19.1 21.2 23.3 25.6 28.9 32.0 35.0 38 41 46 50 54 60 66 72 80 87 96 106 @IZT (mA) 80 60 60 50 45 45 45 35 35 35 25 25 25 20 20 20 15 15 15 10 10 10 8 8 8 8 6 6 4 4 4 4 4 4 2.7 2.7 2.7 Licensed by ON Semiconductor, A trademark of semiconductor Components Industries, LLC for Zener Technology and Products. Zener Impedance (Note 4.) ZZT @IZT (Ω) 20 15 15 13 13 10 7 4 3.5 3 5 5 7 8 9 10 15 15 20 24 25 25 30 30 35 40 45 50 90 115 120 125 130 150 200 250 350 ZZK @IZK (Ω) 400 500 500 500 600 500 400 300 300 200 200 200 200 300 350 400 500 500 500 600 600 600 750 1000 1000 1000 1000 1000 1500 1500 2000 2000 2000 2000 3000 3000 3000 (mA) 1 1 1 1 1 1 1 1 1 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 Leakage Current IR @ VR (uA Max) 60 30 5 3 3 1 1 1 1 1 1 1 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 (Volts) 1 1 1 1 1.5 2 2 3 4 4.5 5 6.5 7 7.7 8.4 9.1 10.5 11.0 12.5 14.0 15.5 17.0 19.0 21.0 23.0 25 27 30 33 36 39 43 47 51 56 62 68 VF = 1.2V Max @IF = 200mA for 60V below types, and VF = 1.4V Max @IF = 200mA for 60V above types November, 2006 / C Page 2 ® TAK CHEONG Licensed by ON Semiconductor, A trademark of semiconductor Components Industries, LLC for Zener Technology and Products. 1. TOLERANCE AND TYPE NUMBER DESIGNATION (VZ) Tolerance designation – the type numbers listed have zener voltage min/max limits as shown. 2. SPECIALS AVAILABLE INCLUDE Nominal zener voltages between the voltages shown and tighter voltage, for detailed information on price, availability and delivery, contact you nearest Tak Cheong representative. 3. ZENER VOLTAGE (VZ) MEASUREMENT The zener voltage (VZ) is tested under pulse conditions such that TJ is no more than 2℃ above TA. 4. ZENER IMPEDANCE (ZZ) DERIVATION The zener impedance is derived from the 60 cycle AC voltage, which results when an AC current having an RMS value equal to 10% of the DC zener current (IZT or IZK) is superimposed on IZT or IZK. November, 2006 / C Page 3 ® TAK CHEONG Package Outline Case Outline Licensed by ON Semiconductor, A trademark of semiconductor Components Industries, LLC for Zener Technology and Products. D0-41 DIM Min Millimeters Max Min Inches Max A B C D 0.72 4.07 25.40 2.04 0.86 5.20 --2.71 0.028 0.160 1.000 0.080 0.034 0.205 --0.107 Note: all dimensions are within JEDEC standard. This datasheet presents technical data of Tak Cheong’s Zener Diodes. Complete specifications for the individual devices are provided in the form of datasheets. A comprehensive Selector Guide is included to simplify the task of choosing the best set of components required for a specific application. For additional information, please visit our website http://www.takcheong.com. Although information in this datasheet has been carefully checked, no responsibility for the inaccuracies can be assumed by Tak Cheong. Please consult your nearest Tak Cheong’s sales office for further assistance. Tak Cheong reserves the right to make changes without further notice to any products herein to further improve reliability, function or design, cost and productivity. TAK CHEONG ® and are registered trademarks of Tak Cheong Electronics (Holdings) Co., Ltd. November, 2006 / C Page 4