ESD5Z12V

TAK K CHEO ONG ® ESD5Z12V SEMI CO NDUCTOR SOD-5 523 SUR RFACE M MOUNT T Very Small Outtline Flatt Lead Plastic Pac ckage ent Volta age Supp pressors Transie ESD Prrotection n Diodes Ratings Absolute Maximum R Parameter Symbol Vpp TA = 25°C unless o otherwise noted IEC6100 00-4-2(ESD) Air Contact Value Units ±15 ±8 KV ESD Per Hum man Body Model 16 KV PD Power D Dissipation (Note 1) 150 mW TSTG -55 to +150 °C TJ Storage Temperature Ra ange Operatin ng Junction Tem mperature +150 °C TL Max Lea ad Solder Tempe erature range (10 Seco ond Duration) 260 °C These ratings are limiting valuess above which the serviceability of th he diode may be im mpaired. 2 in. Note 1. FR-5 = 1.0 x 0.75 x 0.62 es: Specificattion Feature ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ Stand-offf Voltage: 12V Low Leakage Responsse Time is Typiccally < 1ns IEC6100 00-4-2 Level 4 E ESD Protection RoHS Co ompliant DEVICE MA ARKING CODES: Device Type D Device Marking ESD5Z Z12V ZM Green EMC Matte Tin n(Sn) Lead Finissh Band Ind dicates Cathode e Electrical Parameters s Number: DB-269 January 2015, Revision A Page 1 TAK K CHEO ONG ® SEMI CO NDUCTOR Electrical Characteris stics (TA = 25°°C unless otherw wise noted, VF = 0.9V Max. @IF = 10mA for all ttypes) Device Type ESD5Z12V VBR @ IT VRWM IR @ VRWM (Volts) (μA) Max Max Min 12 1 13.5 (Note 2) (Volts) IT (mA) 1.0 IPP+ VC @ Max IPP+ (A) C@ (V Volts) PPK+ (W W) V, f = 1MHz VR = 0V M Max M Max M Max Typ. 5 30 9 95 55 (pF) + Surge curren nt waveform per Figure 1. Note 2: VBR is measured with a pulse p test current IT at an ambient te emperature of 25°C C. CURRENT WAVEFOR W RM： SURGE C Flat Lead d SOD-523 P Package Outline ensions are excclusive of Burrs, Mold Flash & T Tie Bar extrusion ns. Note: Dime Number: DB-269 January 2015, Revision A Page 2 TAK CHEONG ® DISC LA I MER NOTIC E NOTICE The information presented in this document is for reference only. Tak Cheong reserves the right to make changes without notice for the specification of the products displayed herein. The product listed herein is designed to be used with ordinary electronic equipment or devices, and not designed to be used with equipment or devices which require high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), Tak Cheong Semiconductor Co., Ltd., or anyone on its behalf, assumes no responsibility or liability for any damagers resulting from such improper use of sale. This publication supersedes & replaces all information reviously supplied. For additional information, please visit our website http://www.takcheong.com, or consult your nearest Tak Cheong’s sales office for further assistance. Number: DB-100 April 14, 2008 / A