ESD8L5V0C

TAK CHEONG ® ESD8L5V0C SEM IC O N DU C TO R SOD882 Plastic Package Transient Voltage Suppressors ESD Protection Diode Absolute Maximum Ratings Symbol PD TA = 25°C unless otherwise noted Parameter Value Units 150 mW 260 °C -55 to +150 °C Tstg Total Power Dissipation on FR-5 Broad Max Lead Solder Temperature range (10 Second Duration) Storage Temperature Range TJ Junction Temperature +150 °C IEC61000-4-2 ±15 ±8 KV TL ESD Air Discharge Contact Discharge EFT IEC61000-4-4 40 A ESD Per Human Body Model 16 KV SOD882 Package These ratings are limiting values above which the serviceability of the diode may be impaired. Specification Features:           Ultra Low Capacitance Typ. 0.9pF Low Clamping Voltage Small Body Outline Dimensions DEVICE MARKING CODES: Device Type Marking Shipping Low Leakage Current Response Time is Typically < 1ns ESD Rating of Class 3 (>16kV) per Human Body Model ESD8L5V0C 10,000/Reel RoHS Compliant Green EMC Matte Tin(Sn) Lead Finish Weight: approx. 0.001g Number: DB-295 March 2017, Revision B Page 1 TAK CHEONG ® SEM IC O N DU C TO R Electrical Characteristics (TA = 25°C unless otherwise noted) Device Type ESD8L5V0C VBR @ IT VRWM IR @ VRWM (Volts) (A) Max Max Min Max 5.0 1 5.4 --- (Note 1) IT (mA) (Volts) 1.0 C@ VC @ Max IPP IPP* (Volts) (A) Max Max Typ. 12.9 1 0.9 VR = 0V, f = 1MHz (pF) * Surge current waveform per Figure 1. Note 1: VBR is measured with a pulse test current IT at an ambient temperature of 25°C. SURGE CURRENT WAVEFORM： SOD882 Package Outline MILLIMETERS INCHES DIM Typical Soldering Pattern(mm): MIN MAX MIN MAX A 0.46 0.50 0.018 0.020 A1 --- 0.03 --- 0.001 b 0.45 0.55 0.018 0.022 D 0.55 0.65 0.022 0.026 E 0.95 1.05 0.037 0.041 e1 L Typ. 0.65 0.20 0.30 Typ. 0.026 0.008 0.012 Number: DB-295 March 2017, Revision B Page 2 TAK CHEONG ® DISC LA I MER NOTIC E NOTICE The information presented in this document is for reference only. Tak Cheong reserves the right to make changes without notice for the specification of the products displayed herein. The product listed herein is designed to be used with ordinary electronic equipment or devices, and not designed to be used with equipment or devices which require high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), Tak Cheong Semiconductor Co., Ltd., or anyone on its behalf, assumes no responsibility or liability for any damagers resulting from such improper use of sale. This publication supersedes & replaces all information reviously supplied. For additional information, please visit our website http://www.takcheong.com, or consult your nearest Tak Cheong’s sales office for further assistance. Number: DB-100 April 14, 2008 / A