MMSZ5239CSW

TAK CHEONG ® SEMICONDUCTOR 200mW SOD-323 SURFACE MOUNT Small Outline Flat Lead Plastic Package Zener Voltage Regulators Absolute Maximum Ratings Symbol PD TSTG TOPR Power Dissipation Storage Temperature Range Operating Temperature Range TA = 25°C unless otherwise noted Value 200 -65 to +150 -65 to +150 Units mW °C °C Green Product Parameter These ratings are limiting values above which the serviceability of the diode may be impaired. SOD-323 Flat Lead Specification Features: Wide Zener Voltage Range Selection, 4.3V to 75V VZ Tolerance Selection of ±2% Flat Lead SOD-323 Small Outline Plastic Package Surface Device Type Mounting RoHS Compliant Green EMC Matte Tin(Sn) Lead Finish Band Indicates Cathode ELECTRICAL SYMBOL Cathode Anode Electrical Characteristics Device Type MMSZ5229CSW MMSZ5230CSW MMSZ5231CSW MMSZ5232CSW MMSZ5233CSW MMSZ5234CSW MMSZ5235CSW MMSZ5236CSW MMSZ5237CSW MMSZ5238CSW MMSZ5239CSW MMSZ5240CSW MMSZ5241CSW MMSZ5242CSW MMSZ5243CSW MMSZ5244CSW MMSZ5245CSW MMSZ5246CSW MMSZ5247CSW MMSZ5248CSW MMSZ5249CSW MMSZ5250CSW Device Marking TA = 25°C unless otherwise noted VZ @ IZT (Volts) Min Nom 4.3 4.7 5.1 5.6 6.0 6.2 6.8 7.5 8.2 8.7 9.1 10 11 12 13 14 15 16 17 18 19 20 Max 4.386 4.794 5.202 5.712 6.12 6.324 6.936 7.65 8.364 8.874 9.282 10.2 11.22 12.24 13.26 14.28 15.3 16.32 17.34 18.36 19.38 20.4 20 20 20 20 20 20 20 20 20 20 20 20 20 20 9.5 9 8.5 7.8 7.4 7 6.6 6.2 4.214 4.606 4.998 5.488 5.88 6.076 6.664 7.35 8.036 8.526 8.918 9.8 10.78 11.76 12.74 13.72 14.7 15.68 16.66 17.64 18.62 19.6 IZT (mA) ZZT @ IZT (Ω) Max 22 19 17 11 7 7 5 6 8 8 10 17 22 30 13 15 16 17 19 21 23 25 ZZK @ IZK = 0.25mA (Ω) Max 2000 1900 1600 1600 1600 1000 750 500 500 600 600 600 600 600 600 600 600 600 600 600 600 600 IR @ VR (μA) Max 5 5 5 5 5 5 3 3 3 3 3 3 2 1 0.5 0.1 0.1 0.1 0.1 0.1 0.1 0.1 VR (Volts) 1 2 2 3 3.5 4 5 6 6.5 6.5 7 8 8.4 9.1 9.9 10 11 12 13 14 14 15 229C 230C 231C 232C 233C 234C 235C 236C 237C 238C 239C 240C 241C 242C 243C 244C 245C 246C 247C 248C 249C 250C Number: DB-208 December 2009, Revision A Page 1 MMSZ5221CSW through MMSZ5267CSW TAK CHEONG Electrical Characteristics Device Type MMSZ5251CSW MMSZ5252CSW MMSZ5253CSW MMSZ5254CSW MMSZ5255CSW MMSZ5256CSW MMSZ5257CSW MMSZ5258CSW MMSZ5259CSW MMSZ5260CSW MMSZ5261CSW MMSZ5262CSW MMSZ5263CSW MMSZ5264CSW MMSZ5265CSW MMSZ5266CSW MMSZ5267CSW Device Marking Min 251C 252C 253C 254C 255C 256C 257C 258C 259C 260C 261C 262C 263C 264C 265C 266C 267C 21.56 23.52 24.5 26.46 27.44 29.4 32.34 35.28 38.22 42.14 46.06 49.98 54.88 58.8 60.76 66.64 73.5 ® SEMICONDUCTOR TA = 25°C unless otherwise noted VZ @ IZT (Volts) Nom 22 24 25 27 28 30 33 36 39 43 47 51 56 60 62 68 75 Max 22.44 24.48 25.5 27.54 28.56 30.6 33.66 36.72 39.78 43.86 47.94 52.02 57.12 61.2 63.24 69.36 76.5 5.6 5.2 5 4.6 4.5 4.2 3.8 3.4 3.2 3 2.7 2.5 2.2 2.1 2.0 1.8 1.7 IZT (mA) ZZT @ IZT (Ω) Max 29 33 35 41 44 49 58 70 80 93 105 125 150 170 185 230 270 ZZK @ IZK = 0.25mA (Ω) Max 600 600 600 600 600 600 700 700 800 900 1000 1100 1300 1400 1400 1600 1700 IR @ VR (μA) Max 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 VR (Volts) 17 18 19 21 21 23 25 27 30 33 36 39 43 46 47 52 56 VF Forward Voltage = 900mV Maximum @ IF = 10 mA for all types Notes: 1. 2. 3. 4. The zener voltage (VZ) is tested under pulse condition of 1mS. The device numbers listed have a standard tolerance on the nominal zener voltage of ±2%. The zener impedance is derived from the 60-cycle ac voltage, which results when an ac current having an rms value equal to 10% of the dc zener current (IZT or IZK) is superimposed to IZT or IZK. For detailed information on price, availability and delivery of nominal zener voltages between the voltages shown and tighter voltage tolerances, contact your nearest Tak Cheong Electronics representative. Number: DB-208 December 2009, Revision A Page 2 TAK CHEONG TYPICAL CHARACTERISTIC CURVES ® SEMICONDUCTOR Fig.1 TYPICAL FORWARD VOLTAGE Fig.2 EFFECT OF ZENER VOLTAGE ON ZENER IMPEDANCE 250 POWER PASSIPATION,mW 200 150 100 50 0 0 25 50 75 100 125 150 175 200 TEMPERATURE [℃ ] Fig.3 POWER DISSIPATION VS. AMBIENT TEMP. Fig.4 TYPICAL CAPACITANCE Fig.5 ZENER BREAKDOWN CHARACTERISTICS Number: DB-208 December 2009, Revision A Fig.6 ZENER BREAKDOWN CHARACTERISTICS Page 3 TAK CHEONG ® SEMICONDUCTOR Fig.7 TYPICAL LEAKGE CURRENT SOD-323 Package Outline NOTES: 1. The above package outline is similar to JEITA SC-90. 2. Dimensions are exclusive of Burrs, Mold Flash & Tie Bar extrusions. Number: DB-208 December 2009, Revision A Page 4 TAK CHEONG ® D ISC LA I MER NOTIC E NOTICE The information presented in this document is for reference only. Tak Cheong reserves the right to make changes without notice for the specification of the products displayed herein. The product listed herein is designed to be used with ordinary electronic equipment or devices, and not designed to be used with equipment or devices which require high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), Tak Cheong Semiconductor Co., Ltd., or anyone on its behalf, assumes no responsibility or liability for any damagers resulting from such improper use of sale. This publication supersedes & replaces all information reviously supplied. For additional information, please visit our website http://www.takcheong.com, or consult your nearest Tak Cheong’s sales office for further assistance. Number: DB-100 April 14, 2008 / A