TC1N755A

® TAK CHEONG S EM IC O N DU C TO R 500 mW DO-35 Hermetically Sealed Glass Zener Voltage Regulators Absolute Maximum Ratings Parameter Power Dissipation Storage Temperature Range Operating Junction Temperature TA = 25°C unless otherwise noted Value 500 -65 to +200 +200 Units mW °C °C AXIAL LEAD DO35 DEVICE MARKING DIAGRAM L 7x xT L : Logo Device Code : TC1N7xxT Tolerance (T) : (Blank) :A :C :D These ratings are limiting values above which the serviceability of the diode may be impaired. Specification Features: Zener Voltage Range 3.3 to 12 Volts DO-35 Package (JEDEC) Through-Hole Device Type Mounting Hermetically Sealed Glass Compression Bonded Construction All External Surfaces Are Corrosion Resistant And Leads Are Readily Solderable RoHS Compliant Solder Hot Dip Tin (Sn) Lead Finish Cathode Indicated By Polarity Band = 10% = 5% = 2% = 1% Cathode Anode ELECTRICAL SYMBOL Electrical Characteristics Device Type TC1N746A TC1N747A TC1N748A TC1N749A TC1N750A TC1N751A TC1N752A TC1N753A TC1N754A TC1N755A TC1N756A TC1N757A TC1N758A VZ @ IZT (Volts) Nominal 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 TA = 25°C unless otherwise noted IZT (mA) 20 20 20 20 20 20 20 20 20 20 20 20 20 ZZT @ IZT (Ω) Max 28 24 23 22 19 17 11 7 5 6 8 10 17 30 IR @ VR (µA) Max 10 10 10 2 2 1 1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 VR (Volt) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 TC1N759A 12 20 VF Forward Voltage = 1.5 V Maximum @ IF = 200 mA for all types November 2006/ B Page 1 TC1N746A through TC1N759A ® TAK CHEONG S EM IC O N DU C TO R Notes: 1. TOLERANCE AND VOLTAGE DESIGNATION The type numbers listed have zener voltage as shown and have a standard tolerance on the nominal zener voltage of ±5%. Suffix (BLANK) = ±10%, Suffix C = ±2% and D = ±1%. 2. SPECIALS AVAILABLE INCLUDE Nominal zener voltages between the voltages shown and tighter voltage, for detailed information on price, availability and delivery, contact you nearest Tak Cheong representative. 3. ZENER VOLTAGE (VZ) MEASUREMENT The zener voltage (VZ) is tested under pulse condition. The measured VZ is guaranteed to be within specification with device junction in thermal equilibrium. 4. ZENER IMPEDANCE (ZZ) DERIVATION Zener impedance is derived from the 60-cycle ac voltage, which results when an ac current having an RMS value equal to 10% of the dc zener current (IZT) is superimposed to IZT . November 2006/ B Page 2 ® TAK CHEONG S EM IC O N DU C TO R Package Outline Package Case Outline DO-35 DO-35 DIM Min Millimeters Max Min Inches Max A B C D 0.46 0.55 0.018 0.022 3.05 5.08 0.120 0.200 25.40 38.10 1.000 1.500 1.53 2.28 0.060 0.090 Notes: 1. 2. All dimensions are within JEDEC standard. DO35 polarity denoted by cathode band. This datasheet presents technical data of Tak Cheong’s Zener Diodes. Complete specifications for the individual devices are provided in the form of datasheets. A comprehensive Selector Guide is included to simplify the task of choosing the best set of components required for a specific application. For additional information, please visit our website http://www.takcheong.com. Although information in this datasheet has been carefully checked, no responsibility for the inaccuracies can be assumed by Tak Cheong. Please consult your nearest Tak Cheong’s sales office for further assistance. Tak Cheong reserves the right to make changes without further notice to any products herein to further improve reliability, function or design, cost and productivity. TAK CHEONG ® and are registered trademarks of Tak Cheong Electronics (Holdings) Co., Ltd. November 2006/ B Page 3