TC33V

S EMICONDUCTOR 500 mW DO-35 Hermetically Sealed Glass Zener Voltage Regulators AXIAL LEAD DO35 Absolute Maximum Ratings Parameter Power Dissipation Storage Temperature Range Operating Junction Temperature TA = 25°C unless otherwise noted Value 500 -65 to +175 +175 Units mW °C °C L : Logo Device Code : TCxxx DEVICE MARKING DIAGRAM L xx x These ratings are limiting values above which the serviceability of the diode may be impaired. Specification Features: Zener Voltage Range 2.0 to 75 Volts DO-35 Package (JEDEC) Through-Hole Device Type Mounting Hermetically Sealed Glass Compression Bonded Construction All External Surfaces Are Corrosion Resistant And Leads Are Readily Solderable RoHS Compliant Solder Hot Dip Tin (Sn) Terminal Finish Cathode Indicated By Polarity Band ELECTRICAL SYMBOL Cathode Anode Electrical Characteristics Device Type TC2V0 TC2V2 TC2V4 TC2V7 TC3V0 TC3V3 TC3V6 TC3V9 TC4V3 TC4V7 TC5V1 TC5V6 TC6V2 TC6V8 TC7V5 TC8V2 TC9V1 TC10V TC11V TC12V VZ @ IZT (Volts) Nominal 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 TA = 25°C unless otherwise noted IZT (mA) 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 ZZT @ IZT (Ω) Max 100 100 100 110 120 120 100 100 100 80 80 60 60 20 20 20 25 30 30 30 IR @ VR (μA) Max 120 120 120 100 50 20 10 5 5 5 5 5 5 2 0.5 0.5 0.5 0.2 0.2 0.2 VR (Volts) 0.5 0.7 1 1 1 1 1 1 1 1 1.5 2.5 3 3.5 4 5 6 7 8 9 Number: DB-035 June 2008 / E Page 1 TC2V0 through TC75V TAK CHEONG ® TAK CHEONG Electrical Characteristics Device Type VZ @ IZT (Volts) Nominal ® S EMICONDUCTOR TA = 25°C unless otherwise noted IZT (mA) ZZT @ IZT (Ω) Max 35 40 40 45 45 30 35 45 55 65 75 85 90 90 110 110 201 230 240 IR @ VR (μA) Max 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 VR (Volts) 10 11 12 13 15 17 19 21 23 25 27 30 33 36 39 43 47 51 56 TC13V 13 5 TC15V 15 5 TC16V 16 5 TC18V 18 5 TC20V 20 5 TC22V 22 5 TC24V 24 5 TC27V 27 2 TC30V 30 2 TC33V 33 2 TC36V 36 2 TC39V 39 2 TC43V 43 2 TC47V 47 2 TC51V 51 2 TC56V 56 2 TC62V 62 2 TC68V 68 2 TC75V 75 2 VF Forward Voltage = 1.2 V Maximum @ IF = 200 mA for all types Notes: 1. TOLERANCE AND VOLTAGE DESIGNATION The type numbers listed have zener voltage as shown and have a standard tolerance on the nominal zener voltage of ±5%. 2. SPECIALS AVAILABLE INCLUDE Nominal zener voltages between the voltages shown and tighter voltage, for detailed information on price, availability and delivery, contact you nearest Tak Cheong representative. 3. ZENER VOLTAGE (VZ) MEASUREMENT The zener voltage is measured under pulse conditions such that TJ is no more than 2℃ above TA. 4. ZENER IMPEDANCE (ZZ) DERIVATION Zener impedance is derived from the 60-cycle ac voltage, which results when an ac current having an RMS value equal to 10% of the dc zener current (IZT) is superimposed to IZT . Number: DB-035 June 2008 / E Page 2 TAK CHEONG Typical Characteristics 600 ® S EMICONDUCTOR 1000 Total Capacitance [pF] f = 1MHz Ta = 25℃ 100 VR = 0V VR = 2V VR = 5V PD-Power Passipation [mW] 500 400 300 200 100 VR = 20V 10 VR = 30V 0 0 40 1 Temperature [℃ ] 80 120 160 200 0 20 40 VZ - Reverse Voltage [V] 60 80 Figure 1. Power Dissipation vs Ambient Temperature Valid provided leads at a distance of 0.8mm from case are kept at ambient temperature Figure 2. Total Capacitance Differential Zener Impedance [Ω ] 1000 1000 Iz=1mA Iz=2mA Ta = 25℃ Forward Current [mA] 100 Ta = 25℃ 100 Iz=5mA Iz=10mA 10 10 1 1 0.1 1 10 VZ - Reverse Voltage [V] 100 0.1 0 0.2 0.4 0.6 0.8 VF - Forw ard Voltage [m V] 1 1.2 Figure 3. Differential Impedance vs. Zener Voltage Figure 4. Forward Current vs. Forward Voltage 300 250 Reverse Current [mA] 200 150 100 50 0 0 2 4 6 VZ - Reverse Voltage [V] 8 10 PD = 500mW Ta = 25℃ 100 PD = 500mW Ta = 25℃ Reverse Current [mA] 10 1 0.1 0.01 15 25 35 45 55 65 VZ - Reverse Voltage [V] 75 Figure 5. Reverse Current vs. Reverse Voltage Figure 6. Reverse Current vs. Reverse Voltage Number: DB-035 June 2008 / E Page 3 TAK CHEONG Package Outline Package ® S EMICONDUCTOR Case Outline DO-35 DO-35 DIM Min A B C D 0.46 3.05 25.40 1.53 Millimeters Max 0.55 5.08 38.10 2.28 Min 0.018 0.120 1.000 0.060 Inches Max 0.022 0.200 1.500 0.090 Notes: 1. 2. All dimensions are within JEDEC standard. DO35 polarity denoted by cathode band. Number: DB-035 June 2008 / E Page 4 TAK CHEONG ® D ISC LA I MER NOTIC E NOTICE The information presented in this document is for reference only. Tak Cheong reserves the right to make changes without notice for the specification of the products displayed herein. The product listed herein is designed to be used with ordinary electronic equipment or devices, and not designed to be used with equipment or devices which require high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), Tak Cheong Semiconductor Co., Ltd., or anyone on its behalf, assumes no responsibility or liability for any damagers resulting from such improper use of sale. This publication supersedes & replaces all information reviously supplied. For additional information, please visit our website http://www.takcheong.com, or consult your nearest Tak Cheong’s sales office for further assistance. Number: DB-100 April 14, 2008 / A