AC1060

AC Series • Current Transformer Quick Reference Guide Low Cost 50/60Hz Current Transformers Applications • • • • Sensing Overload Current Ground fault detection Metering Analog to Digital Circuits Features • Excellent quality at extremely competetive price due to high volume production • Manufactured in an ISO 9001:2015 and ISO 14001:2015 certified Talema facility • Fully RoHS & REACH Compliant Schematic IP IS I - Turn Primary 2 AC Series Part No. Terminating Resistor RL Turns Ratio Amps Ohms Watt RL VL 3 Electrical Specifications at 20°C Primary Current IP 1 DCR (Ohms) • Standard Accuracy Current Transformers RCF Nominal @ 10% Volts/Amp @ rated IP for various loads (Ohms) 100 500 2K Iex 5K N et Weight Vex µArms Vrms (grams) Case Dimensions - mm L ID H W C D A C 1005 5 1000:1 100 0.0025 41.80 1.010 0.10 0.46 1.43 2.01 237 0.66 16.3 -- -- -- -- -- -- A C 1010 10 1000:1 100 0.0100 41.80 1.010 0.10 0.45 1.10 1.42 386 1.32 16.3 -- -- -- -- -- -- A C 1015 15 1000:1 100 0.0230 41.80 1.010 0.10 0.45 0.90 1.12 513 1.99 16.3 -- -- -- -- -- -- A C 1020 20 1000:1 100 0.0400 41.80 1.010 0.10 0.43 0.76 0.93 628 2.65 16.3 -- -- -- -- -- -- A C 1025 25 1000:1 100 0.0630 48.00 1.020 0.10 0.47 1.06 1.31 566 3.65 35.5 30.20 11.40 30.20 14.30 20.32 10.16 A C 1030 30 1000:1 100 0.0900 48.00 1.020 0.10 0.47 0.95 1.16 644 4.38 35.5 30.20 11.40 30.20 14.30 20.32 10.16 A C 1040 40 1000:1 100 0.1600 49.30 1.026 0.10 0.46 0.87 1.05 914 5.82 47.3 34.90 14.60 34.90 14.30 25.40 10.16 A C 1050 50 1000:1 100 0.2500 49.30 1.026 0.10 0.43 0.76 0.90 1090 7.28 47.3 34.90 14.60 34.90 14.30 25.40 10.16 A C 1060 60 1000:1 100 0.3600 24.00 1.001 0.10 0.44 0.66 0.76 1250 7.41 65.2 38.10 14.60 38.10 15.90 33.00 10.16 A C 1075 75 1000:1 100 0.5700 24.00 1.001 0.10 0.39 0.57 0.65 1520 9.26 65.2 38.10 14.60 38.10 15.90 33.00 10.16 AC1100 100 1000:1 100 1.0000 21.30 1.001 0.10 0.34 0.50 0.56 1740 12.00 80.0 44.50 19.05 44.50 14.30 35.56 10.16 AC1150 150 1000:1 100 2.2500 11.00 1.002 0.10 0.37 0.50 0.55 1820 16.60 150.0 55.60 23.80 55.60 20.60 45.72 12.70 A C 1200 200 1000:1 100 4.0000 11.00 1.002 0.10 0.31 0.41 0.45 2340 22.20 150.0 55.60 23.80 55.60 20.60 45.72 12.70 RCF : Ratio correction factor - Multiply current readings by this factor to compensate for transformer losses Mechanical Drawing AC1005 - AC1020 AC1025 - AC1200 L 11.12 W 23.80 23.80 H TALEMA INDIA W/Y AC1XXX TALEMA INDIA W/Y AC1XXX 2 3 15.24 1 Ø9.50 5±1mm 2 Ø0.813 1.75 7.62 Dimensional Unit: mm Dimensional Tolerance: ±0.25mm (Unless Specified) Pin Pitch Tolerance: ±0.10mm 3 1 ØID Ø1.016 5±1mm C D Notes: Dimensional Unit: mm Dimensional Tolerance: ±0.25mm (Unless Specified) Pin Pitch Tolerance: ±0.10mm 1) Unless requested, the terminating resistor and the one-turn primary are not supplied 2) Pin 3: Normally for mechanical support only but will be used on center tapped designs 3) Each part number adjusted to be most accurate at specified load Talema Group • Magnetic Components • www.talema.com Regional Locations - Design, Manufacturing, Sales & Marketing Talema Group Regional Offices North America Asia United States India (Sales & Marketing) (Design, Manufacturing, Sales & Marketing) Talema Group, LLC Administrative Office Factory Premises PO Box 935 900 Innovation Drive Talema Electronic India Private Limited Talema Electronic India Private Limited Plot Nos. 30, 31 Electrical and Electronic Suite 120, Rolla Missouri 65402 Tel: +1 573-303-3675 E-Mail: sales@talemagroup.com Web: www.talema.com Door No. 221, 1st and 2nd Floor KJ Plaza, Opp.to Vidya Mandir School Meyanoor Main Road Salem - 636 004 Tamil Nadu INDIA Tel: +91 427 - 243 3100 Fax: +91 427 - 243 3109 E-Mail: talema@talemaindia.net Web: www.talema.com Industrial Estate Suramangalam Salem - 636 005 Tamil Nadu INDIA Tel: +91 427 - 243 3000 E-Mail: talema@talemaindia.net Web: www.talema.com Europe Germany Ireland (Design, Sales & Marketing) (Design, Sales & Marketing) Talema Elektronik GmbH Sembdnerstr. 5 Nuvotem TEO Units W & X, Gweedore Business Park 82110 Germering Tel: +49 89 - 841 00 - 0 Derrybeg, Letterkenny, Co. Donegal Tel: +353 (0) 74 95 48666 Fax: +49 89 - 841 00 25 E-Mail: info@talema.de Fax: +353 (0) 74 95 48139 E-Mail: info@nuvotem.com Web: www.talema.com Web: www.nuvotem.com Czech Republic (Design, Manufacturing, Sales & Marketing) NT Magnetics s.r.o. Chebská 27 322 00 Plzeñ Tel: +420 377 - 338 351 Fax: +420 377 - 338 350 E-Mail: talema@talema.cz Web: www.ntmagnetics.cz Locations of Talema Group Regional Offices Talema Group • Magnetic Components • www.talema.com 01/20