CCJ-4-101C

CCJ Series • Compact SMD Common Mode Chokes Features • Low cost, compact SMD for pick and place compatability while providing consistent and reliable coplanarity • High attenuation over a wide frequency range • Manufactured in ISO-9001 approved Talema facility • Other inductance values available upon request Electrical Specifications Ratings @ 25°C ambient Operating Temperature: 0 to 70°C Storage Temperature: -25° to +105°C Test voltage between windings: 500 Vrms Test frequency: Inductance measured @ 100kHz/20 mVrms C C J Series • C ompact D ouble and Quad C hokes for D ata and Signal Line EMI Suppression Part N umber N umber of D ata Lines OC L (µH ±30% ) IN (mA) DCR (mOhms Typ.) N umber of C oils Windings per C ore Schematic D ouble C hokes C C J-2-260 C C J-2-102 C C J-2-152 C C J-2-222 C C J-2-332 C C J-2-502 C C J-2-682 C C J-2-103 C C J-2-123 C C J-2-283 C C J-2-503 C C J-2-703 2 2 2 2 2 2 2 2 2 2 2 2 26 1000 1500 2200 3300 5000 6800 10000 12000 28000 50000 70000 900 550 550 550 550 500 450 400 400 270 200 170 55 140 100 115 140 180 200 250 270 520 970 1490 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 A A A A A A A A A A A A Quad C hokes • 4 w indings per core C C J-4-260 C C J-4-470 C C J-4-101 C C J-4-221 C C J-4-471 C C J-4-681 C C J-4-102 C C J-4-152 C C J-4-222 C C J-4-332 C C J-4-502 C C J-4-103 C C J-4-123 C C J-4-583 4 4 4 4 4 4 4 4 4 4 4 4 4 4 26 47 100 220 470 680 1000 1500 2200 3300 5000 10000 12000 58000 600 500 400 330 400 400 350 350 350 350 330 230 170 90 65 90 130 190 120 140 170 120 140 180 220 430 770 2350 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 4 4 4 4 4 4 4 4 4 4 4 4 4 B B B B B B B B B B B B B B Quad C hokes • 2 cores w ith double w indings C C J-4-250C C C J-4-101C 4 4 25 100 650 450 110 220 2 2 2 2 C C 0.551 0.472 (14.00) (12.00) TALEMA IN WK/YR Part Number Suggested Pad Layout 0.300 (7.62) Schematics A 1 4 8 5 3 4 6 5 3 4 6 5 1 2 B 8 7 1 2 C 8 7 0.100 (2.54) 0.300 (7.62) 0.433 (11.00) 0° - 8° 0.590 (15.00) 0.102 (2.60) 0.047 (1.20) 0.354 0.315 (9.00) (8.00) 0.020 x 0.12 (0.50 x 0.30) Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) Surface Coplanarity will be 0.004(0.10) maximum Germany: Int.+49 89 - 841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep.: Int.+420 37 - 744 9303 • India.+91 427 - 244 1325 http://www.talema-nuvotem.com 4