CMJ-2-110

CMJ Series • SMD Miniature Common Mode Chokes Features • Miniature, low cost SMD for pick and place compatability while providing consistent and reliable coplanarity • High attenuation over a wide frequency range • Manufactured in ISO-9001 approved Talema facility • Other inductance values available Electrical Specifications Ratings at 25°C ambient Operating Temperature: 0 to 70°C Storage Temperature: -25° to +105°C Test voltage between windings: 500Vrms Test Frequency: Inductance measured @ 100kHz/20mVrms CMJ Series • Micro-Miniature Common Mode Chokes for Data and Signal Line EMI Suppression Part Number OCL (µH) +50/-30% 11 24 47 100 470 1000 2200 4700 10000 20000 IN (mA) 500 500 500 500 500 500 400 200 200 140 LL (µH) DCR (mOhms) 70 100 130 260 190 250 450 840 800 1800 Number of Data Lines 2 2 2 2 2 2 2 2 2 2 Schematic Double Chokes CMJ-2-110 CMJ-2-240 CMJ-2-470 CMJ-2-101 CMJ-2-471 CMJ-2-102 CMJ-2-222 CMJ-2-472 CMJ-2-103 CMJ-2-203 0.05 0.10 0.20 0.25 0.20 0.25 0.35 0.50 0.40 0.40 2 2 2 2 2 2 2 2 2 2 Tri Chokes CMJ-3-680 68 400 0.25 110 3 3 Quad Chokes CMJ-4-470 CMJ-4-101 CMJ-4-471 CMJ-4-102 CMJ-4-222 CMJ-4-472 CMJ-4-103 CMJ-4-123 47 100 470 1000 2200 4700 10000 12000 500 500 500 500 400 200 110 100 0.25 0.30 0.25 0.35 0.50 0.70 0.50 0.50 180 330 200 310 570 860 1700 1800 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 Dimensions Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) Surface Coplanarity will be 0.004(0.10) maximum CMJ-2 Schematic TALEMA IN WK/YR Part Number CMJ-3 Schematic TALEMA IN WK/YR Part Number CMJ-4 0.354 0.299 (9.00) (7.60) 6 5 4 0.209 0.169 (5.30) (4.30) 3 x 0.050 (3 x 1.27) TALEMA IN WK/YR Part Number Schematic 4 1 2 0° - 8° 0.354 0.299 (9.00) (7.60) 0.100 (2.54) 2 1 2 0° - 8° 4 3 0.354 0.299 (9.00) (7.60) 2 x 0.05 (2 x 1.27) 3 1 2 0° - 8° 8 7 6 5 0.228 (5.80) 0.228 (5.80) 3 0.228 (5.80) 3 4 0.209 0.169 (5.30) (4.30) 0.020 x 0.12 (0.50 x 0.30) Suggested Pad Layout 0.394 (10.00) 0.209 0.169 (5.30) (4.30) 0.020 x 0.12 (0.50 x 0.30) Suggested Pad Layout 0.394 (10.00) 0.213 (5.40) 0.031 (0.80) 0.020 x 0.12 (0.50 x 0.30) Suggested Pad Layout 0.394 (10.00) 0.213 (5.40) 0.039 (1.00) 0.031 (0.80) 0.091 (2.30) 0.100 (2.54) 2 x 0.050 (2 x 1.27) 3 x 0.050 (3 x 1.27) THE TALEMA GROUP • Worldwide Toroidal Specialists 3