LCP5-2.04-47

LCP Series • Miniature Low Cost Toroidal Inductors LCP Series surface mount toroidal inductors are designed for use in applications where energy storage is required for maintenance of a highly stable inductance when a rapid change in load current occurs. These inductors are excellent for filtering high frequency signals while supporting a substantial DC current as well as for AC ripple, switch mode power supplies and for use with DC-DC Converters. Features • Ideal as 1:1 Coupled Inductor • Series/Parallel connection for Storage Choke applications • May be used as Isolation Transformer • Low loss core suitable for use upto 1MHz • Highly stable inductance with varying loads • Capable of substantial DC current an AC ripple • Manufactured in ISO 9001:2015 and ISO 14001:2015 certified Talema facility • Fully RoHS & REACH Compliant & Meets lead free reflow level J-STD-020E Part Number LCP1-3.00-2.2 LCP1-2.10-4.7 LCP1-1.40-10 LCP1-1.10-15 LCP1-0.92-22 LCP1-0.76-33 LCP1-0.64-47 LCP1-0.54-68 LCP1-0.44-100 LCP1-0.36-150 LCP1-0.30-220 LCP2-4.40-2.2 LCP2-3.10-4.7 LCP2-2.08-10 LCP2-1.68-15 LCP2-1.40-22 LCP2-1.32-33 LCP2-1.08-47 LCP2-0.80-68 LCP2-0.66-100 LCP2-0.54-150 LCP2-0.44-220 LCP2-0.36-330 LC P 3-6.64-2.2 LC P 3-4.46-4.7 LC P 3-3.00-10 LC P 3-2.42-15 LC P 3-2.00-22 LC P 3-1.62-33 LC P 3-1.34-47 LC P 3-1.12-68 LC P 3-0.94-100 LC P 3-0.76-150 LC P 3-0.62-220 LC P 3-0.50-330 LC P 3-0.42-470 LC P 3-0.36-680 Parallel Connected L0 (µH) Full ± 15% DCR L o ad No mOhm Current L o ad (ADC) 3.00 2.2 9 2.10 4.7 16 1.40 10 37 1.10 15 58 0.92 22 86 0.76 33 133 0.64 47 205 0.54 68 307 0.44 100 376 0.36 150 719 0.30 220 866 4.40 2.2 7 3.10 4.7 13 2.08 10 28 1.68 15 52 1.40 22 70 1.32 33 83 1.08 47 139 0.80 68 241 0.66 100 295 0.54 150 521 0.44 0.36 6.64 4.46 3.00 2.42 2.00 1.62 1.34 1.12 0.94 0.76 0.62 0.50 0.42 0.36 220 330 2.2 4.7 10 15 22 33 47 68 100 150 220 330 470 680 Talema Group 784 960 5 12 26 37 55 84 127 188 250 346 478 671 1003 1500 • Electrical Specifications @25°C Test frequency: Inductance measured @10KHz / 10mV Test voltage between windings: 500Vrms Operating temperature range: -40°C to +125°C Climatic Category: IEC68-1 40/125/56 Applications DC-DC Converters • Common Mode Filter • Computer Note Books • Pulse Modulation Switching Regulators: Step-up, Step-down, Inverting or dual output • Filtering • Battery Powered Equipment Series Connected L0 (µH) Full DCR L o ad ± 15% mOhm Current No (Nom) (ADC) L o ad 1.50 8.8 36 1.05 18.8 64 0.70 40 148 0.55 60 232 0.46 88 344 0.38 132 532 0.32 188 820 0.27 272 1228 0.22 400 1504 0.18 600 2876 0.15 880 3464 2.20 8.8 28 1.55 18.8 52 1.04 40 112 0.84 60 208 0.70 88 280 0.66 132 332 0.54 188 556 0.40 272 964 0.33 400 1180 0.27 600 2084 0.22 0.18 3.32 2.23 1.5 1.21 1.00 0.81 0.67 0.56 0.47 0.38 0.31 0.25 0.21 0.18 880 1320 8.8 18.8 40 60 88 132 188 272 400 600 880 1320 1880 2720 3136 3840 20 48 104 148 220 336 508 752 1000 1384 1912 2684 4012 6000 Dimensions Inches(Millimeters) Energy Storage (µJ) * 7.0 7.2 7.2 7.0 7.1 7.2 7.1 7.2 7.2 7.2 7.3 16.4 16.0 16.4 16.0 16.2 16.0 21.2 20.2 15.8 16.1 15.8 15.8C 31.7 32.2 32.8 31.8 32.7 32.1 32.3 32.4 32.2 31.8 31.2 30.4 30.5 32.3 Magnetic Components • A B C D H 0.276 (7.0) 0.276 (7.0) 0.236 (6.0) 0.059 (1.5) 0.201 (5.1) 0.354 (9.0) 0.354 (9.0) 0.299 (7.6) 0.067 (1.7) 0.248 (6.3) 0.433 (11.0) 0.433 (11.0) 0.370 (9.4) 0079 (2.0) 0.268 (6.8) www.talema.com • Miniature High Current Toroidal Inductors Parallel C onnected Series C onnected Energy Storage (µJ) * Full Load C urrent (ADC) LO (µH ) ± 15% N o L o ad DCR mOhm Full Load C urrent (ADC) LO (µH ) ± 15% N o L o ad DCR mOhm (N om) L C P 4-7 .40 -2 .2 L C P 4-4.8 0 -4.7 L C P 4-3 .3 6 -10 L C P 4-2 .8 0 -15 L C P 4-2 .3 0 -2 2 L C P 4-1.8 6 -3 3 L C P 4-1.5 6 -47 L C P 4-1.3 2 -6 8 L C P 4-1.0 6 -10 0 L C P 4-0 .8 8 -15 0 L C P 4-0 .7 2 -2 2 0 L C P 4-0 .6 0 -3 3 0 L C P 4-0 .5 0 -47 0 L C P 4-0 .40 -6 8 0 L C P 4-0 .3 4-10 0 0 L C P 5 -6 .40 -4.7 7.40 4.80 3.36 2.80 2.30 1.86 1.56 1.32 1.08 0.88 0.72 0.60 0.50 0.40 0.34 6.40 2.2 4.7 10 15 22 33 47 68 100 150 220 330 470 680 1000 4.7 5 9 21 35 50 76 112 167 250 307 470 657 900 1355 2042 7 3.70 2.40 1.68 1.40 1.15 0.93 0.78 0.66 0.54 0.44 0.36 0.30 0.25 0.20 0.17 3.20 8.8 18.8 40 60 88 132 188 272 400 600 880 1320 1880 2720 4000 18.8 20 36 84 140 200 304 448 668 1000 1228 1880 2628 3600 5420 8168 28 L C P 5 -4.5 0 -10 4.50 10 16 2.25 40 64 71.6 L C P 5 -3 .5 0 -15 L C P 5 -3 .0 0 -2 2 L C P 5 -2 .44-3 3 L C P 5 -2 .0 4-47 L C P 5 -1.7 0 -6 8 L C P 5 -1.40 -10 0 L C P 5 -1.16 -15 0 L C P 5 -0 .9 4-2 2 0 L C P 5 -0 .7 8 -3 3 0 L C P 5 -0 .6 4-47 0 L C P 5 -0 .5 4-6 8 0 L C P 5 -0 .44-10 0 0 L C P 5 -0 .3 6 -15 0 0 L C P 5 -0 .3 0 -2 2 0 0 3.50 3.00 2.44 2.04 1.70 1.40 1.16 0.94 0.78 0.64 0.54 0.44 0.36 0.30 15 22 33 47 68 100 150 220 330 470 680 1000 1500 2200 28 38 52 72 86 128 218 298 451 604 934 1629 2483 3773 1.75 1.50 1.22 1.02 0.85 0.70 0.58 0.47 0.39 0.32 0.27 0.22 0.18 0.15 60 88 132 188 272 400 600 880 1320 1880 2720 4000 6000 8800 112 152 208 288 344 512 872 1192 1804 2416 3736 6516 9932 15092 71.6 71.6 72.6 72.1 71.3 71.6 73.4 71.5 73.8 70.9 73.2 71.4 71.6 72.9 Part N umber D imensions Inches(Millimeters) 42.5 43.2 43.2 43.2 43.6 43.9 43.1 43.4 42.9 42.8 42.0 44.0 43.6 40.2 42.5 73.9 A B C D H 0.472 (12.0) 0.472 (12.0) 0.402 (10.2) 0.082 (2.2) 0.276 (7.0) 0.472 (12.0) 0.472 (12.0) 0.402 (10.2) 0.082 (2.2) 0.358 (9.1) Talema's engineering staff can assist in the design of other inductance values and sizes. Notes: Schematics 1. L(µH): Inductance is tested @10KHz / 10mV 1 1 4 2. The µJoule rating (½LI²) is the ability of the inductor to store energy. Dimensions Pad Layout Bottom View 1 2 2 3 C B B Side View 80% 80 60% 60 40 40% B 20 20% 0 0% H C Talema Group 0 Pad Dimensions Type Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise Surface Coplanarity will be