MSJ-400A

ISDN SO Compact SMD Interface Modules Features • excellent output characteristics ensure compliance with CCITT.I.430 pulse waveform template when used with recommended IC pairing • SMD modules are designed for pick and place compatability • excellent and consistent balance between windings • modular design maximizes suppression effectivity and transmission properties • compact module eliminates three components reducing assembly and storage cost • full compatibility with all common IC's • operating temperature: 0 to 70°C Electrical Specifications @ 25°C Turns Ratio: Bold = IC side windings Compact SMD Modules comply with Basic Insulation Level EN60950, UL1950 and UL1459 Part Number MSJ-400A-XXX MSJ-403A-XXX MSJ-405A-XXX MAJ-400A-XXX MAJ-403A-XXX MAJ-405A-XXX Basic P/N + Suffix (Example: MSJ-403A-470 LP (mH Min) 30 30 30 30 30 30 LN (µH) Turns Ratio 1:1:1: 1 1:1:2: 2 1:1:2.5: 2.5 1:1:1: 1 1:1:2: 2 1:1:2.5: 2.5 RCU (Ohms) LL (µH Max) 10 10 10 5 5 5 ^IDC (mA) 4 4 4 4 4 4 CC (pF Max) 150 150 150 120 120 120 RCUP (Ohms) 1.7 1.7 1.7 1.7 1.7 1.9 RCUS (Ohms) 2.0 4.0 4.6 1.7 3.4 4.4 VP (Vrms) 1500 1500 1500 1500 1500 1500 Schematic A A A A A A Common Mode Choke -000 -470 -101 -501 -502 No Choke 47 0.5 100 0.7 500 0.5 5000 2.0 Test Conditions: Inductance and coupling capcitance: 10kHz, 100mV Common Mode Choke Inductance: 100kHz, 20mV Leakage Inductance: 100kHz, 100mV Standard Packaging: Tape and Reel MSJ Module TALEMA IN WK/YR Part Number Suggested Pad Layout MSJ 0.100 (2.54) 0.047 (1.20) 1 0° - 8° Schematic A Line 2 3 4 5 IC 16 15 14 13 12 11 10 9 0.591 0.535 (15.00) (13.60) 0.122 (3.11) 7 x 0.100 (2.54) 0.945 (24.00) 0.630 0.394 (16.00) (10.00) 0.354 0.307 (9.00) (7.80) 0.020 x 0.12 (0.50 x 0.30) 0.700 (17.78) 6 7 8 MAJ MAJ Compact Chip Module 0.551 0.472 (14.00) (13.00) TALEMA IN WK/YR Part Number 0.100 (2.54) 0.047 (1.20) 0.591 0.374 (15.00) (9.50) 0.787 (20.00) 0° - 8° 0.044 (1.11) 7 x 0.100 (2,54) 0.700 (17.78) 0.354 0.307 (9.00) (7.80) 0.020 x 0.12 (0.50 x 0.30) Surface Coplanarity will be 0.004(0.10) maximum Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise Germany: Int.+4989-841 00-0 • Ireland: Int.+35 374-954 8666 • Czech Rep: Int.+420 37 - 744 9303 • India: Int.+91 427 - 244 1325 http://www.talema-nuvotem.com 10