MUJ-100A-101

ISDN SO Miniature SMD Interface Modules Features • excellent output characteristics ensure compliance with CCITT.I.430 pulse waveform template when used with recommended IC pairing • SMD modules are designed for pick and place compatability • excellent and consistent balance between windings • modular design maximizes suppression effectivity and transmission properties • full compatibility with all common IC's • manufactured in ISO-9001:2000, TS-16949:2002 and ISO-14001:2001 certified Talema facility • fully RoHS compliant and meets lead free reflow level J-STD-020C • operating temperature: -40° to 85°C • storage temperature: -40 to +125°C Electrical Specifications @ 25°C Turns Ratio: Bold = IC side windings Miniature Chip SMD Modules comply w ith Functional Insulation Level EN60950, UL1950 and UL1459 Part Number MUJ-100A or B-XXX MUJ-103A or B-XXX MUJ-105A or B-XXX LP (mH Min) 25 25 25 LN (μH) 50 100 500 5000 Turns Ratio 1:1:1: 1 1:1:2: 2 1:1:2.5: 2.5 RCU (Ohms) No Choke 0.4 0.5 0.4 0.8 LL (μH Max) 5 5 5 CC (pF Max) 50 50 50 RCUP (Ohms) 2.7 3.7 5.2 RCU (Ohms) No Choke 0.5 0.6 0.6 0.9 RCUS (Ohms) 3.3 8.4 10.5 VP (Vrms) 1500 1500 1500 Schematic A or B A or B A or B RCU (Ohms) No Choke 0.7 0.9 0.8 1.5 C o mmo n Mo d e C h o k e Basic P/N + Suffix MUJ-100A-000 MUJ-100A or B-500 MUJ-100A or B-101 MUJ-100A or B-501 MUJ-100A or B-502 Basic P/N + Suffix MUJ-103A -000 MUJ-103A or B-500 MUJ-103A or B-101 MUJ-103A or B-501 MUJ-103A or B-502 Basic P/N + Suffix MUJ-105A-000 MUJ-105A or B-500 MUJ-105A or B-101 MUJ-105A or B-501 MUJ-105A or B-502 Test Conditions: Polarity and Turns Ratio: ±1% Inductance: 25mH minimum, line side windings in series @ 10kHz, 100mV Leakage Inductance: Line side windings in series, IC side windings short circuited - measurement @ 100kHz, 100mV Coupling capacitance: IC side windings in series to Line side windings in series @ 10kHz, 100mV Common Mode Choke Inductance: 100kHz, 20mV Schematic Test Voltage: 1.5kV for 2 Sec. - Line side windings in series to IC side windings in series (Without Choke) Standard Packaging: Tape and Reel Line 1 A IC 16 15 14 13 12 11 10 9 MUJ Miniature Module 0.050 (1.27) Suggested Pad Layout 0.031 (0.80) 2 3 4 5 6 7 0.378 0.346 (9.60) (8.80) TALEMA IN WK/YR Part Number 0.350 (8.89) 0.504 (12.80) 0° - 8° 0.077 (1.96) 0.394 (10.60) 8 Schematics - With Choke 0.079 (2.00) 0.350 (8.89) Line 1 A IC 16 15 14 13 12 11 10 9 5 12 4 3 13 6 2 8 1 Line 7 2 3 4 B IC 10 9 11 15 16 14 0.236 (6.00) 0.189 (4.80) Pins: 0.016x0.016 (0.40 x 0.40) Surface Coplanarity will be 0.004 (0.10) 5 6 7 8 Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise USA: AlfaMag Electronics LLC | 945 Parkwood | PO Box 668 | Rolla, MO 65402 Germany: Int.+4989-841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427 - 244 1325 Phone: 1-800-413-6693 FAX: 1-364-5390 EMail: support@alfamag.com http://www.talema-nuvotem.com http://www.alfamag.com (07-07) Communications\ISDN\MUJ Packing and Dimensions Dimensions for carrier tape (Unit : mm) E± 0.1 P2 ± 0.1 P0 ± 0.1 A D0 + 0 .1 -0 .0 T 0.05 ± D1 W± 0.3 F± 0.15 B0 ± 0.1 P± 0.1 A0± 0 .1 K0 ± 0.1 A Dimensions are in mm Type W MUJ 24.00 F 11.50 E 1.75 P2 2.00 P0 4.00 Dimensions in mm D0 D1 P A0 10.20 B0 13.55 T 0.35 K0 6.55 SECT ION A-A Reel Size 330x24 Quantity Quantity (Pcs/Reel) (Reel/Cased) 600 5/3000 Ø1.50 Ø1.50 16.00 Reel dimensions MM J-10 0B -50 1 MM J-10 0B -50 1 Blank Min. 160mm MM J-10 0B -50 1 TALEM A IN TALEM A IN TALEM A IN M /Y M /Y M /Y Pcs Blank Min. 400mm Drawing direction Reel Dimensions in mm Type 330 x 24 A 330 B 24 C 20.2 N 100 Outer Carton Inner Carton 335 355 50 33 0 35 5 285 USA: AlfaMag Electronics LLC | 945 Parkwood | PO Box 668 | Rolla, MO 65402 Germany: Int.+4989-841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427 - 244 1325 Phone: 1-800-413-6693 FAX: 1-364-5390 EMail: support@alfamag.com http://www.talema-nuvotem.com (07-07) Communications\ISDN\MUJ http://www.alfamag.com