ACM2012-361-2P-T001

E M C C o m p o n e n t s Common mode filters Automotive signal line (for infotainment) ACM series Pb RoHS REACH SVHC-Free Lead Free AEC-Q200 ACM2012 type FEATURES Highly reliable with a temperature range of –40 to +105°C. Impedance variation: Extensive lineup are available for compatibility with various usages Common mode EMI measure: Possible to suppress waveform common mode EMI without straining the waveform. Operating temperature range: –40 to +105°C Compliant with AEC-Q200 APPLICATION Radiated noise suppression for car multimedia interfaces (MOST, USB2.0, IDB-1394, etc.). Application guides: Car Infotainment PART NUMBER CONSTRUCTION ACM 2012 Series name L x W dimensions 2.0×1.2 mm - 900 - Impedance () at 100MHz 2P - Number of lines T 001 Packaging style Internal code CHARACTERISTICS SPECIFICATION TABLE Common mode impedance DC resistance [1 line] [100MHz] ( )min. ( )typ. ( )max. 65 90 0.19 90 120 0.22 150 200 0.25 270 360 0.50 510 680 1.3 750 1000 1.5 1500 2200 2.5 ・Operating temperature range: –40 to +105°C Rated current Rated voltage Part No. (mA)max. 400 370 350 220 200 190 150 (V)max. 50 50 50 50 50 50 50 ACM2012-900-2P-T001 ACM2012-121-2P-T001 ACM2012-201-2P-T001 ACM2012-361-2P-T001 ACM2012-681-2P-T001 ACM2012-102-2P-T001 ACM2012-222-2P-T001 Measurement equipment Measurement item Product No. Common mode impedance 4991A DC resistance 4338A Insulation resistance 4339A ＊ Equivalent measurement equipment may be used. Manufacturer Keysight Technologies Keysight Technologies Keysight Technologies Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (1/4) 20210506 cmf_automotive_signal_acm2012_en.fm E M C C o m p o n e n t s ACM2012 type IMPEDANCE VS. FREQUENCY CHARACTERISTICS 10000 361 Common mode 201 Common mode 121 Common mode 900 Common mode 1000 Impedance (Ω) 222 Common mode 102 Common mode 681 Common mode 100 900 Differential mode 201 Differential mode 121 Differential mode 361 Differential mode 10 1 102 Differential mode 222 Differential mode 681 Differential mode 1 10 100 Frequency (MHz) 1000 10000 Measurement equipment Product No. Manufacturer 4991A Keysight Technologies ＊ Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (2/4) 20210506 cmf_automotive_signal_acm2012_en.fm E M C C o m p o n e n t s ACM2012 type SHAPE & DIMENSIONS PACKAGING STYLE REEL DIMENSIONS 2.0±0.2 3 1 4 (1.2) (0.4) Dimensions in mm 9 +1 –0 ø13.0±0.2 (ø21) 13±1.4 ø180+0/–3 RECOMMENDED LAND PATTERN 0.4 Dimensions in mm ø1.5 +0.1 –0 2±0.1 4±0.1 0.75 1.1 8±0.2 0.75 Sprocket hole 0.25±0.05 1.75±0.1 0.4 0.4 TAPE DIMENSIONS 3.5±0.1 (0.4) 60 +1 –0 1.2±0.2 (0.05) 2 (0.3) (0.5) (0.3) 1.3max. 2.0±0.5 B Dimensions in mm CIRCUIT DIAGRAM A K ø1 +0.2 –0 4±0.1 Cavity Dimensions in mm 1 4 2 3 Type ACM2012 • No polarity Soldering B (2.25) K (1.4) 500 to 560min. RECOMMENDED REFLOW PROFILE Preheating A (1.4) 160min. Taping 440min. Natural cooling Peak Drawing direction 245°C Dimensions in mm Temperature 230°C 230°C PACKAGE QUANTITY Package quantity 180°C 2,000 pcs/reel 5s max. 150°C TEMPERATURE RANGE, INDIVIDUAL WEIGHT 60 to 120s 10 to 30s Time Operating Storage temperature range temperature range –40 to +105 °C –40 to +105 °C  The storage temperature range is for after the assembly. Individual weight 10 mg Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (3/4) 20210506 cmf_automotive_signal_acm2012_en.fm E M C C o m p o n e n t s REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is less than 6 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment   (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (4/4) 20210506 cmf_automotive_signal_acm2012_en.fm