ACM4532-801-2P-T001

(1/3) 004-01 / 20050906 / e9713_acm.fm EMC Components ACM Series Common Mode Choke Coils for DC Power Line SMD FEATURES • A chip-type common mode filter for large current applications. Common mode impedance surpasses 300 to 1000Ω at 100MHz. Noise is greatly suppressed. • Capable of handling the highest current (up to 10A) of any chiptype common mode filter. • Height and size have been considered, resulting in a compact and light-weight choke coil. Applicable for the miniaturization required to reduce the size and weight of portable equipment. • The products contain no lead and also support lead-free soldering. • This product does not contain regulated substances that are slated to be included in RoHS. APPLICATIONS Used for power line noise suppression for any electronic devices. Used to counter adapter/battery line noise for relatively large electronic devices such as notebook PCs, stand-alone word processors, etc. PRODUCT IDENTIFICATION ACM 7060 - 701 - 2PL - TL (1) (2) (3) (4) (5) (6) (1) Series (2) Dimensions L×W 7060: 7.0×6.0mm (3) Impedance[at 100MHz] 701: 700Ω (4) Number of lines 2PL: 2-line (5) Packaging style T: ø180mm reel taping TL: ø330mm reel taping (6) TDK internal code TEMPERATURE RANGES Operating –25 to +85°C 2 3 4 2 3 d 1 Insulation resin L Terminal electrode c 4 W 1 c SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM/RECOMMENDED PC BOARD PATTERN(REFLOW SOLDERING) ACM3225, 4532 TYPES a b a Dimensions in mm T Ferrite D1 D1 D2 Type ACM3225 ACM4532 D2 a 1.5 1.8 b 1.6 2.3 c 1.4 1.75 d 1.1 1.1 Dimensions in mm Type ACM3225 ACM4532 L 3.2±0.2 4.5±0.2 W 2.5±0.2 3.2±0.2 T 2.3 max. 3.0 max. D1 0.7 1 D2 0.65 1 • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • All specifications are subject to change without notice. (2/3) 004-01 / 20050906 / e9713_acm.fm EMC Components ACM Series Common Mode Choke Coils for DC Power Line SMD SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM/RECOMMENDED PC BOARD PATTERN(REFLOW SOLDERING) ACM7060, 9070, 1211, 1513 TYPES c L 4 2 3 d 1 2 3 c 4 W 1 a b a T A B A E Dimensions in mm Type ACM7060 ACM9070 ACM1211 ACM1513 C D a 2.5 2.5 3.2 3.3 b 4.0 6.0 7.6 10.4 c 1.5 1.5 2.7 2.7 d 1.5 2.0 2.5 3.8 C Dimensions in mm Type ACM7060 ACM9070 ACM1211 ACM1513 L 7.0±0.2 9.0±0.2 12.0±0.3 15.0±0.4 W 6.0±0.2 7.0±0.2 11.0±0.3 13.0±0.4 T 3.5max. 4.5max. 6.0max. 6.0max. A 1.5±0.2 1.5±0.2 2.7±0.2 2.7±0.2 B 1.5±0.2 2.0±0.2 2.5±0.2 3.8±0.2 C 1.5±0.2 1.5±0.2 2.3±0.2 2.3±0.2 D 4.0typ. 6.0typ. 7.4typ. 10.4typ. E 2.2±0.2 2.9±0.2 3.8±0.2 3.8±0.2 Weight(g) 0.35 0.82 2.20 3.15 ELECTRICAL CHARACTERISTICS Impedance (Ω)[at 100MHz] min. 450 450 600 225 500 500 500 750 450 Part No. ACM3225-601-2P ACM4532-601-2P ACM4532-801-2P ACM7060-301-2PL ACM7060-701-2PL ACM9070-701-2PL ACM1211-701-2PL ACM1211-102-2PL ACM1513-551-2PL typ. 600 600 800 300 700 700 700 1000 550 PACKAGING STYLE AND QUANTITIES Packaging style Type ACM3225 ACM4532 Taping ACM7060 ACM9070 ACM1211 ACM1513 ø180mm ø330mm ø180mm ø330mm ø330mm ø330mm ø330mm ø330mm Quantity 1000 pieces/reel 5000 pieces/reel 500 pieces/reel 2000 pieces/reel 1500 pieces/reel 800 pieces/reel 500 pieces/reel 500 pieces/reel • All specifications are subject to change without notice. DC resistance (mΩ)max. Rated current Idc(A)max. Insulation resistance (MΩ)min. Rated voltage Edc(V)max. 200 100 100 10 15 10 6 14 4 1.0 1.5 1.0 5 4 5 8 6 10 10 10 10 10 10 10 10 10 10 50 50 50 50 50 50 50 50 50 (3/3) 004-01 / 20050906 / e9713_acm.fm EMC Components ACM Series Common Mode Choke Coils for DC Power Line SMD TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS ACM3225-601-2P ACM4532-601-2P 1000 ACM4532-801-2P 1000 1000 100 100 100 10 10 Differential mode 1 10 100 Frequency (MHz) 1000 ACM7060-301-2PL Common mode 100 Differential mode 1 10 100 Frequency (MHz) 1000 100 Differential mode 1 10 100 Frequency (MHz) Impedance(Ω) Differential mode 100 1 10 100 Frequency (MHz) 1000 Common mode HP4291A Differential mode HP4291A • All specifications are subject to change without notice. Differential mode 1 10 100 Frequency (MHz) 1000 ACM1513-551-2PL Common mode 1 10 100 Frequency (MHz) Common mode 1000 Differential mode MEASURING CIRCUITS 100 10 1000 100 10 Common mode 10000 1000 Common mode 1000 1000 10000 1000 10 100 Frequency (MHz) 10000 ACM1211-102-2PL 10000 1 ACM9070-701-2PL Common mode 10 1000 1 Impedance(Ω) Impedance(Ω) Impedance(Ω) 10 100 Frequency (MHz) 1000 ACM1211-701-2PL Impedance(Ω) 1 10000 1000 10 Differential mode ACM7060-701-2PL 10000 10 10 Differential mode 1 Impedance(Ω) 1 Impedance(Ω) Common mode Impedance(Ω) Impedance(Ω) Common mode Common mode 1000 Differential mode 100 10 1 10 100 Frequency (MHz) 1000