Film Capacitors – Power Electronic Capacitors
PEC MKP DC
Series/Type:
Ordering code:
B2569x
B25690A1427K101
Date:
Version:
2019-5-27
Preliminary1
Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then
change the color to "white". This ensures that the table disappears (invisible) for the customer PDF.
Don't change formatting when entering or pasting text in the table and don't add any cell or line in and to it!
Identification/Classification 1
Film Capacitors – Power Electronic Capacitors
(header 1 + top left bar):
Identification/Classification 2
PEC MKP DC
(header 2 + bottom left header bar):
Ordering code: (top right header bar)
B25690A1427K101
Series/Type: (bottom right header bar)
B2569x
Preliminary data (optional):
Preliminary datasheet
Department:
CAP PW PD
Date:
2019-5-27
Version:
Preliminary1
TDK Electronics AG 2019. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without TDK Electronics' prior express consent is prohibited.
Film Capacitors – Power Electronic Capacitors
PEC MKP DC
B25690A1427K101
B2569x
Preliminary datasheet
Applications
Wind power, Solar power
UPS, SVG, APF, Energy storage
Motor driver systems, Frequency drives
EV / HEV, Locomotive traction
Features
Low ESR, Low ESL, Low Losses
High ripple current, High capacitance density
Self-healing property, High reliability, Long lifetime
Naturally air cooling or forced air cooling
UL810(Construction) Approved, File E502394
RoHS Compliance
Construction
Metallized polypropylene film
Non-PCB, Hard polyurethane resin
Extruded round aluminum can with stud
Reference only
CAP PW PD
Please read Cautions and warnings and
Important notes at the end of this document.
2019-5-27
Page 2 of 9
Film Capacitors – Power Electronic Capacitors
PEC MKP DC
B25690A1427K101
B2569x
Preliminary datasheet
Dimensional drawings
Item
Dimension
Unit
ØD
85±0.5
mm
Hc
135
mm
Ht
141±1.5
mm
L
10
mm
Terminals
M6 ×10
mm
Øt
12±0.3
mm
P
32±0.5
mm
Fixing Nut
M12 × 6
mm
General technical data
Voltage between terminals VTT, (10 s)
1.5 VRDC
VDC
1)
Voltage between terminals and Case VTC, (10s)
√ VRDC+1000 or 4000
Dielectric dissipation factor Tan δ0
2 · 10-4
Storage temperature range
−40 ... +85
°C
Operation ambient temperature range (Ths≤ 85°C)
−40 ... +85
°C
Max. temperature allowed at the capacitors hot spot Ths
85
°C
Max. permissible altitude (above sea level)
2000
m
Life expectancy (@VRDC/Ths=75°C)
100,000
h
Climatic Category
40/85/56
Reference standard
IEC 61071, UL810
VAC
1): Whichever is the highest value
CR
Tol.
uF
420
±10%
VRDC
IMAX*
Lself
RTH
ESR(typical)
Tan δ
Weight
VDC
Arms
nH
K/W
mΩ
(100HZ)
kg
1100
65
≤40
2.8
2.4
≤1.0
1.0
CAP PW PD
Please read Cautions and warnings and
Important notes at the end of this document.
2019-5-27
Page 3 of 9
Film Capacitors – Power Electronic Capacitors
PEC MKP DC
B25690A1427K101
B2569x
Preliminary datasheet
*Current de-rating according to maximum temperature
Ths = + 85 °C (Altitude ≤ 2000m)
Current Derating @ Ths = 85 °C
70
Imax (A)
60
50
40
30
20
10
0
40
45
50
55
60
65
70
75
80
85
Amb. Temp. (°C)
Expected lifetime
Expected Lifetime @ Ths
70°C
75°C
80°C
85°C
VOP/VRDC
1.1
1.05
1
0.95
0.9
0.5
0.7
0.9
1.1
1.3
1.5
tLD/tLD(co)
CAP PW PD
Please read Cautions and warnings and
Important notes at the end of this document.
2019-5-27
Page 4 of 9
Film Capacitors – Power Electronic Capacitors
PEC MKP DC
B25690A1427K101
B2569x
Preliminary datasheet
Structure of ordering code
Version:
A: plastic ring L=10mm
B: plastic ring L=45mm
C: plastic ring L=55mm
S: special
X: sample phase
MKP DC Series
Rated voltage: 110 • 10 = 1100 VDC
B2569 0 A 1 427 K 10 1
Terminal type:
0 = Female M6
2 = Female M8
9 = special
Rated capacitance:
7
107 = 10 · 10 pF = 100 µF
7
427 = 42 · 10 pF = 420 µF
8
108 = 10 · 10 pF = 1 mF
Distance between terminals:
1 = 32 mm
3 = 50 mm
9 = special
Capacitance tolerance
J = ± 5%
K = ± 10%
A = special
Label information (Reference only)
Date code explanation
WW Z YYYY
WW Z YYYY: production weeks (ex.: 20)
WW Z YYYY: produced in Zhuhai (China)
WW Z YYYY: production year (ex.: 2019)
Bar code explanation
Bar code consists of batch number and serial number.
Batch number: 9 digits (ex.: 012345678)
Serial number: 3 digits (ex.: 901)
Packing information
Packing unit: 12 pieces per box
Typical dimensions:
A: 465mm;
B: 355mm;
C: 205mm;
CAP PW PD
Please read Cautions and warnings and
Important notes at the end of this document.
2019-5-27
Page 5 of 9
Film Capacitors – Power Electronic Capacitors
PEC MKP DC
B25690A1427K101
B2569x
Preliminary datasheet
Cautions and warnings
In case of dents of more than 1 mm depth or any other mechanical damage, capacitors must not
be used at all.
Check tightness of the connections/terminals periodically.
The energy stored in capacitors may be lethal. To prevent any chance of shock, discharge and
short-circuit the capacitor before handling.
Failure to follow cautions may result, worst case, in premature failures, bursting and fire.
Protect the capacitor properly against over current and short circuit.
TDK Electronics is not responsible for any kind of possible damages to persons or things due to
improper installation and application of capacitors for power electronics.
Safety
Electrical or mechanical misapplication of capacitors may be hazardous. Personal injury or property
damage may result from bursting of the capacitor or from expulsion melted material due to
mechanical disruption of the capacitor.
Ensure good, effective grounding for capacitor enclosures.
Observe appropriate safety precautions during operation (self-recharging phenomena and the high
energy contained in capacitors).
Handle capacitors carefully, because they may still be charged even after disconnection.
The terminals of capacitors, connected bus bars and cables as well as other devices may also be
energized.
Follow good engineering practice.
Thermal load
After installation of the capacitor it is necessary to verify that maximum hot-spot temperature is not
exceeded at extreme service conditions.
Mechanical protection
The capacitor has to be installed in a way that mechanical damages and dents in the aluminum can
are avoided.
Storage and operating conditions
Do not use or store capacitors in corrosive atmosphere, especially where chloride gas, sulfide gas,
acid, alkali, salt or the like are present. In dusty environments regular maintenance and cleaning
especially of the terminals is required to avoid conductive path between phases and/or phases and
ground.
CAP PW PD
Please read Cautions and warnings and
Important notes at the end of this document.
2019-5-27
Page 6 of 9
Film Capacitors – Power Electronic Capacitors
PEC MKP DC
B25690A1427K101
B2569x
Preliminary datasheet
Service life expectancy
Electrical components do not have an unlimited service life expectancy; this applies to self-healing
capacitors, too. The maximum service life expectancy may vary depending on the application the
capacitor is used in.
Display of ordering codes for TDK Electronics products
The ordering code for one and the same product can be represented differently in data sheets, data books,
other publications, on the company website, or in order-related documents such as shipping notes, order
confirmations and product labels. The varying representations of the ordering codes are due to
different processes employed and do not affect the specifications of the respective products.
Detailed information can be found on the Internet under www.tdk-electronics.tdk.com/orderingcodes.
CAP PW PD
Please read Cautions and warnings and
Important notes at the end of this document.
2019-5-27
Page 7 of 9
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As a
rule we are either unfamiliar with individual customer applications or less familiar with them than
the customers themselves. For these reasons, it is always ultimately incumbent on the customer
to check and decide whether a product with the properties described in the product specification is
suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or failure
before the end of their usual service life cannot be completely ruled out in the current state
of the art, even if they are operated as specified. In customer applications requiring a very high
level of operational safety and especially in customer applications in which the malfunction or
failure of an electronic component could endanger human life or health (e.g. in accident
prevention or life-saving systems), it must therefore be ensured by means of suitable design of the
customer application or other action taken by the customer (e.g. installation of protective circuitry
or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or
failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material
Data Sheets on the Internet (www.tdk-electronics.tdk.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently,
we cannot guarantee that all products named in this publication will always be available.
The aforementioned does not apply in the case of individual agreements deviating from the
foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to our General Terms
and Conditions of Supply.
7. Our manufacturing sites serving the automotive business apply the IATF 16949 standard.
The IATF certifications confirm our compliance with requirements regarding the quality
management system in the automotive industry. Referring to customer requirements and
customer specific requirements (“CSR”) TDK always has and will continue to have the policy of
respecting individual agreements. Even if IATF 16949 may appear to support the acceptance of
unilateral requirements, we hereby like to emphasize that only requirements mutually agreed
upon can and will be implemented in our Quality Management System. For clarification
purposes we like to point out that obligations from IATF 16949 shall only become legally binding if
individually agreed upon.
Page 8 of 9
Important notes
8. The trade names EPCOS, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CTVS,
DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PowerHap, PQSine, PQvar,
SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, ThermoFuse,
WindCap are trademarks registered or pending in Europe and in other countries. Further
information will be found on the Internet at www.tdk-electronics.tdk.com/trademarks.
Release 2018-10
Page 9 of 9
