Film Capacitors
Metallized Polyester Film Capacitors (MKT)
Series/Type:
B32560 ... B32564
Date:
May 2009
© EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
Metallized polyester film capacitors (MKT)
B32560 ... B32564
General purpose (stacked) SilverCapTM
Typical applications
SMPS, converter
Electronic ballasts
Compact fluorescent lamps (CFL)
Ignition
Dimensional drawing
Climatic
Max. operating temperature: 125 °C
Climatic category (IEC 60068-1): 55/125/56
Features
Special dimensions available on request
High pulse strength
Small dimensions
Construction
Dielectric: polyethylene terephthalate
(polyester, PET)
Stacked-film technology
Uncoated
Terminals
Parallel wire leads, lead-free tinned
Special lead lengths available on request
Dimensions in mm
Lead spacing
±0.4
7.5
10.0
15.0
22.5
27.5
Lead diameter
d1
0.5
0.5
0.6
0.8
0.8
0.8
Type
B32560
B32561
B32562J
B32562H
B32563
B32564
Marking
Rated capacitance (coded),
rated DC voltage
Delivery mode
Bulk (untaped)
Taped (Ammo pack or reel) for lead spacing ≤15.0 mm.
For notes on taping, refer to chapter "Taping and packing“.
Notes on mounting
When mounting these capacitors, take into account creepage distances and clearances to
adjacent live parts. The insulating strength of the cut surfaces to other live parts of the circuit is
1.5 times the capacitors rated DC voltage, but is always at least 300 V DC.
Capacitors with 7.5 mm lead spacing are only suitable for use with single-clad printed circuit
boards.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 32
B32560 ... B32564
General purpose (stacked) SilverCapTM
Overview of available types
Lead spacing 7.5 mm
10.0 mm
15.0 mm
Type
B32560
B32561
B32562
Page
5
7
9
VR (V DC)
63
100 250 400 630 1000 63
100 250 400 630 100 250 400 630
VRMS (V AC)
40
63
63
160 200 400 500 40
CR (µF)
0.0010
0.0015
0.0022
0.0033
0.0047
0.0068
0.010
0.015
0.022
0.033
0.047
0.068
0.10
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
4.7
6.8
10
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 32
160 200 350 63
160 200 350
B32560 ... B32564
General purpose (stacked) SilverCapTM
Overview of available types
Lead spacing 22.5 mm
27.5 mm
Type
B32563
B32564
Page
10
VR (V DC)
100
250
400
100
250
400
420
VRMS (V AC)
63
160
200
63
160
200
200
11
CR (µF)
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 32
B32560
General purpose (stacked) SilverCapTM
Ordering codes and packing units (lead spacing 7.5 mm)
VR
VRMS
CR
f ≤60 Hz
V DC V AC
µF
63 40
1.0
1.5
2.2
3.3
4.7
100 63
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
250 160
0.047
0.068
0.10
0.15
0.22
0.33
0.47
0.68
Max. dimensions
w×h×l
mm
4.0 × 6.8 × 9.0
5.1 × 7.6 × 9.0
6.5 × 8.2 × 9.0
8.5 × 9.1 × 9.0
9.8 × 11.0 × 9.0
2.5 × 5.1 × 9.0
2.7 × 5.7 × 9.0
3.4 × 6.1 × 9.0
4.2 × 6.5 × 9.0
5.5 × 7.0 × 9.0
6.7 × 8.2 × 9.0
8.5 × 9.2 × 9.0
9.5 × 11.0 × 9.0
2.5 × 5.2 × 9.0
2.6 × 5.7 × 9.0
3.2 × 6.1 × 9.0
3.9 × 7.0 × 9.0
4.9 × 7.5 × 9.0
6.4 × 8.2 × 9.0
7.4 × 9.8 × 9.0
9.5 × 11.0 × 9.0
Ordering code
(composition see
below)
B32560J0105+***
B32560J0155+***
B32560J0225+***
B32560J0335+000
B32560J0475+000
B32560J1224+***
B32560J1334+***
B32560J1474+***
B32560J1684+***
B32560J1105+***
B32560J1155+***
B32560J1225+000
B32560J1335+000
B32560J3473+***
B32560J3683+***
B32560J3104+***
B32560J3154+***
B32560J3224+***
B32560J3334+***
B32560J3474+000
B32560J3684+000
Ammo
pack
pcs./MOQ
8800
6800
6000
12400
12000
9600
8000
6000
5000
13000
12400
12400
8200
6800
5200
Reel
pcs./
MOQ
7200
5600
4800
10000
9600
8000
6400
4800
4000
10400
10000
8000
6800
5200
4400
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Special dimensions available on request.
For corresponding design rules, refer to chapter "General technical information", page .
Composition of ordering code
+ = Capacitance tolerance code:
M = ±20%
K = ±10%
J = ±5%
Please read Cautions and warnings and
Important notes at the end of this document.
*** = Packaging code:
289 = Ammo pack
189 = Reel
000 = Untaped (lead length 5 1 mm)
Page 5 of 32
Untaped
pcs./
MOQ
4000
2000
2000
1400
1000
7600
6000
4800
3600
2000
1600
1200
800
7600
6800
4800
3600
2600
1800
1200
800
B32560
General purpose (stacked) SilverCapTM
Ordering codes and packing units (lead spacing 7.5 mm)
VR
VRMS
CR
f ≤60 Hz
V DC V AC
µF
400 200
0.0010
0.0015
0.0022
0.0033
0.0047
0.0068
0.010
0.015
0.022
0.033
0.047
0.068
0.10
0.15
0.22
630 400
0.0010
0.0015
0.0022
0.0033
0.0047
0.0068
0.010
0.015
0.022
1000 500
0.0022
0.0033
0.0047
Max. dimensions
w×h×l
mm
2.5 × 5.5 × 9.0
2.5 × 5.5 × 9.0
2.5 × 5.5 × 9.0
2.5 × 5.5 × 9.0
2.5 × 5.5 × 9.0
2.5 × 5.5 × 9.0
2.5 × 5.5 × 9.0
2.5 × 5.5 × 9.0
2.5 × 5.5 × 9.0
2.6 × 6.0 × 9.0
3.2 × 6.5 × 9.0
3.8 × 7.3 × 9.0
4.9 × 7.7 × 9.0
6.5 × 8.2 × 9.0
7.7 × 9.8 × 9.0
2.5 × 5.5 × 9.0
2.5 × 5.5 × 9.0
2.5 × 5.5 × 9.0
2.5 × 5.5 × 9.0
2.5 × 5.5 × 9.0
3.2 × 6.5 × 9.0
3.8 × 7.5 × 9.0
4.6 × 8.3 × 9.0
5.7 × 8.6 × 9.0
2.5 × 6.0 × 9.0
3.3 × 6.5 × 9.0
3.6 × 7.4 × 9.0
Ordering code
(composition see
below)
B32560J6102+***
B32560J6152+***
B32560J6222+***
B32560J6332+***
B32560J6472+***
B32560J6682+***
B32560J6103+***
B32560J6153+***
B32560J6223+***
B32560J6333+***
B32560J6473+***
B32560J6683+***
B32560J6104+***
B32560J6154+***
B32560J6224+000
B32560J8102+***
B32560J8152+***
B32560J8222+***
B32560J8332+***
B32560J8472+***
B32560J8682+***
B32560J8103+***
B32560J8153+000
B32560J8223+000
B32560J9222+***
B32560J9332+***
B32560J9472+***
Ammo
pack
pcs./MOQ
14000
13000
13400
12400
13600
14000
12800
13000
12400
12400
10400
8600
6800
5400
14800
13000
13400
14000
13600
15000
9000
13000
10000
9000
Reel
pcs./
MOQ
11200
10400
10800
10000
10800
11200
10400
10400
10000
10000
8400
7200
5600
4000
12000
2600
10800
11200
10800
9200
9200
10400
8000
7600
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Special dimensions available on request.
For corresponding design rules, refer to chapter "General technical information", page .
Composition of ordering code
+ = Capacitance tolerance code:
M = ±20%
K = ±10%
J = ±5%
Please read Cautions and warnings and
Important notes at the end of this document.
*** = Packaging code:
289 = Ammo pack
189 = Reel
000 = Untaped (lead length 5 1 mm)
Page 6 of 32
Untaped
pcs./
MOQ
9200
7200
7200
6800
7600
7600
7200
7200
6800
6400
4800
3600
2000
1800
1200
9200
7200
7200
7600
7200
5200
4000
2400
1600
6800
4800
3600
B32561
General purpose (stacked) SilverCapTM
Ordering codes and packing units (lead spacing 10 mm)
VR
VRMS
CR
f ≤60 Hz
V DC V AC
µF
63
40
1.0
1.5
2.2
3.3
4.7
6.8
100
63
0.68
1.0
1.5
2.2
3.3
250 160
0.10
0.15
0.22
0.33
0.47
0.68
1.0
400 200
0.033
0.047
0.068
0.10
0.15
0.22
0.33
0.47
Max. dimensions
w×h×l
mm
3.5 × 6.2 × 11.0
4.3 × 6.9 × 11.0
5.1 × 7.9 × 11.0
6.4 × 9.1 × 11.0
7.3 × 11.0 × 11.0
8.8 × 12.7 × 11.0
3.6 × 6.3 × 11.5
4.5 × 6.9 × 11.5
5.6 × 7.8 × 11.5
6.9 × 9.0 × 11.5
7.8 × 10.5 × 11.5
2.8 × 5.3 × 11.5
3.3 × 6.0 × 11.5
4.2 × 6.6 × 11.5
5.2 × 7.5 × 11.5
6.3 × 8.5 × 11.5
7.5 × 9.7 × 11.5
9.5 × 11.0 × 11.5
2.5 × 5.1 × 11.5
2.6 × 6.0 × 11.5
3.2 × 6.6 × 11.5
4.0 × 6.9 × 11.5
5.2 × 7.7 × 11.5
6.6 × 8.5 × 11.5
8.0 × 9.5 × 11.5
9.8 × 11.0 × 11.5
Ordering code
(composition see
below)
B32561J0105+***
B32561J0155+***
B32561J0225+***
B32561J0335+000
B32561J0475+000
B32561J0685+000
B32561J1684+***
B32561J1105+***
B32561J1155+***
B32561J1225+000
B32561J1335+000
B32561J3104+***
B32561J3154+***
B32561J3224+***
B32561J3334+***
B32561J3474+***
B32561J3684+000
B32561J3105+000
B32561J6333+***
B32561J6473+***
B32561J6683+***
B32561J6104+***
B32561J6154+***
B32561J6224+***
B32561J6334+000
B32561J6474+000
Ammo
pack
pcs./MOQ
4960
4200
3400
5040
4200
3240
6160
5040
4160
3360
2720
6480
6240
5560
4360
3400
2720
Reel
pcs./
MOQ
7600
6000
5000
8000
6000
4800
9200
8000
6000
5200
4400
9200
9200
8400
6800
5200
4000
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Special dimensions available on request.
For corresponding design rules, refer to chapter "General technical information", page .
Composition of ordering code
+ = Capacitance tolerance code:
M = ±20%
K = ±10%
J = ±5%
Please read Cautions and warnings and
Important notes at the end of this document.
*** = Packaging code:
289 = Ammo pack
189 = Reel
000 = Untaped (lead length 5 1 mm)
Page 7 of 32
Untaped
pcs./
MOQ
4000
2800
2000
1200
800
600
4000
2000
2000
1400
800
5200
4000
2800
2000
1400
800
600
6000
5200
4000
2800
2000
1400
800
600
B32561
General purpose (stacked) SilverCapTM
Ordering codes and packing units (lead spacing 10 mm)
VR
VRMS
CR
f ≤60 Hz
V DC V AC
µF
630 350
0.015
0.022
0.033
0.047
0.068
0.10
0.15
Max. dimensions
w×h×l
mm
2.8 × 6.3 × 11.0
3.4 × 6.9 × 11.0
4.2 × 7.6 × 11.0
5.3 × 8.0 × 11.0
6.3 × 9.0 × 11.0
7.3 × 11.4 × 11.0
8.8 × 13.3 × 11.0
Ordering code
(composition see
below)
B32561J8153+***
B32561J8223+***
B32561J8333+***
B32561J8473+***
B32561J8683+000
B32561J8104+000
B32561J8154+000
Ammo
pack
pcs./MOQ
6320
5200
4080
3360
Reel
pcs./
MOQ
9200
8000
6400
5000
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Special dimensions available on request.
For corresponding design rules, refer to chapter "General technical information", page .
Composition of ordering code
+ = Capacitance tolerance code:
M = ±20%
K = ±10%
J = ±5%
Please read Cautions and warnings and
Important notes at the end of this document.
*** = Packaging code:
289 = Ammo pack
189 = Reel
000 = Untaped (lead length 5 1 mm)
Page 8 of 32
Untaped
pcs./
MOQ
4800
3600
2400
1800
1400
800
600
B32562
General purpose (stacked) SilverCapTM
Ordering codes and packing units (lead spacing 15 mm)
VR
VRMS
CR
f ≤60 Hz
V DC V AC
µF
100
63
2.2
3.3
4.7
6.8
10
250 160
0.47
0.68
1.0
1.5
2.2
3.3
400 200
0.22
0.33
0.47
0.68
1.0
1.5
630 350
0.22
0.33
0.47
Max. dimensions
w×h×l
mm
4.9 × 8.0 × 16.5
6.0 × 9.3 × 16.5
7.3 × 10.6 × 16.5
9.0 × 11.8 × 16.5
11.8 × 13.0 × 16.5
5.0 × 6.7 × 16.5
6.0 × 7.8 × 16.5
7.0 × 9.3 × 16.5
8.7 × 11.0 × 16.5
10.7 × 12.8 × 16.5
13.9 × 14.5 × 16.5
4.7 × 7.5 × 16.5
6.0 × 8.3 × 16.5
7.3 × 9.3 × 16.5
8.9 × 10.8 × 16.5
10.9 × 12.5 × 16.5
13.7 × 15.2 × 16.5
9.2 × 12.2 × 16.5
11.2 × 14.2 × 16.5
13.5 × 16.3 × 16.5
Ordering code
(composition see
below)
B32562J1225+***
B32562J1335+***
B32562H1475+***
B32562H1685+***
B32562H1106+000
B32562J3474+***
B32562J3684+***
B32562J3105+***
B32562H3155+***
B32562H3225+000
B32562H3335+000
B32562J6224+***
B32562J6334+***
B32562J6474+***
B32562H6684+***
B32562H6105+000
B32562H6155+000
B32562H8224+000
B32562H8334+000
B32562H8474+000
Ammo
pack
pcs./MOQ
4760
3840
3160
2560
4760
3840
3320
2640
4960
3840
3160
2560
Reel
pcs./
MOQ
5200
4000
3600
2800
5200
4000
3600
2800
5200
4000
3600
2800
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Special dimensions available on request.
For corresponding design rules, refer to chapter "General technical information", page .
Composition of ordering code
+ = Capacitance tolerance code:
M = ±20%
K = ±10%
J = ±5%
Please read Cautions and warnings and
Important notes at the end of this document.
*** = Packaging code:
289 = Ammo pack
189 = Reel
000 = Untaped (lead length 5 1 mm)
Page 9 of 32
Untaped
pcs./
MOQ
3200
2000
1600
1160
800
3800
2000
2000
1200
800
600
3400
2000
1800
1200
800
400
1400
1000
720
B32563
General purpose (stacked) SilverCapTM
Ordering codes and packing units (lead spacing 22.5 mm)
VR
VRMS
CR
f ≤60 Hz
V DC V AC
µF
100
63
6.8
10
15
22
250 160
2.2
3.3
4.7
400 200
1.0
1.5
2.2
Max. dimensions
w×h×l
mm
7.0 × 10.5 × 24.0
8.6 × 12.2 × 24.0
10.9 × 14.0 × 24.0
12.8 × 17.2 × 24.0
8.3 × 11.2 × 24.0
10.1 × 13.5 × 24.0
12.2 × 15.5 × 24.0
8.3 × 11.2 × 24.0
10.3 × 13.2 × 24.0
12.6 × 15.5 × 24.0
Ordering code
(composition see
below)
B32563J1685+000
B32563J1106+000
B32563J1156+000
B32563J1226+000
B32563J3225+000
B32563J3335+000
B32563J3475+000
B32563J6105+000
B32563J6155+000
B32563J6225+000
Untaped
pcs./MOQ
3680
3840
2480
1440
2960
2800
1560
3400
2640
1440
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Special dimensions available on request.
For corresponding design rules, refer to chapter "General technical information", page .
Composition of ordering code
+ = Capacitance tolerance code:
M = ±20%
K = ±10%
J = ±5%
Packaging code:
000 = Untaped (lead length 5 1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 32
B32564
General purpose (stacked) SilverCapTM
Ordering codes and packing units (lead spacing 27.5 mm)
VR
VRMS
CR
f ≤60 Hz
V DC V AC
µF
100
63
10
15
22
33
250 160
3.3
4.7
6.8
10
400 200
1.5
2.2
3.3
4.7
420 200
4.7
6.8
Max. dimensions
w×h×l
mm
7.6 × 11.0 × 29.0
9.1 × 13.5 × 29.0
11.0 × 16.0 × 29.0
13.0 × 19.8 × 29.0
7.9 × 14.0 × 29.0
9.6 × 15.8 × 29.0
11.9 × 18.0 × 29.0
13.8 × 22.5 × 29.0
7.8 × 14.2 × 29.0
9.6 × 16.4 × 29.0
12.2 × 18.8 × 29.0
14.2 × 22.8 × 29.0
16.0 × 20.0 × 29.0
16.0 × 20.0 × 29.0
Ordering code
(composition see
below)
B32564J1106+000
B32564J1156+000
B32564J1226+000
B32564J1336+000
B32564J3335+000
B32564J3475+000
B32564J3685+000
B32564J3106+000
B32564J6155+000
B32564J6225+000
B32564J6335+000
B32564J6475+000
B32564T6475K000
B32564T6685K000
Untaped
pcs./MOQ
2720
1720
1280
1440
3000
1600
1200
1120
3000
1600
1320
1040
1160
1160
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Special dimensions available on request.
For corresponding design rules, refer to chapter "General technical information", page .
The technical data given on the next pages do not apply to 420 V series. Please contact your
nearest EPCOS representative if you need further information.
Composition of ordering code
+ = Capacitance tolerance code:
M = ±20%
K = ±10%
J = ±5%
Packaging code:
000 = Untaped (lead length 5 1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 32
B32560 ... B32564
General purpose (stacked) SilverCapTM
Technical data
Operating temperature range
Max. operating temperature Top,max
Upper category temperature Tmax
Lower category temperature Tmin
Rated temperature TR
Dissipation factor tan δ (in 10-3) at
at 20 °C
(upper limit values)
CR ≤ 0.1 µF
0.1 µF < CR ≤ 1 µF
1 kHz 8
8
10 kHz 15
15
100 kHz 30
VR
CR ≤ 0.33 µF
≤ 100 V DC 3750 MΩ
≥ 250 V DC 7500 MΩ
Insulation resistance Rins
or time constant τ = CR Rins
at 20 °C, rel. humidity ≤ 65%
(minimum as-delivered values)
DC test voltage
1.4 VR, 2 s
TA (°C)
DC voltage derating
Category voltage VC
(continuous operation with VDC TA ≤ 85
VC = VR
or VAC at f ≤ 60 Hz)
85 0.33 µF
1250 s
2500 s
AC voltage derating
VC,RMS = VRMS
VC,RMS=VRMS (165TA)/80
AC voltage (max. hours)
Vop = 1.0 VC,RMS (2000 h)
Vop = 1.0 VC,RMS (1000 h)
≤ 5%
≤ 3 10-3 (at 1 kHz)
≤ 5 10-3 (at 10 kHz)
≥ 50% of minimum
as-delivered values
1 fit (≤ 1 10-9 /h) at 0.5 VR, 40 °C
200 000 h at 1.0 VR, 85 °C
For conversion to other operating conditions and temperatures,
refer to chapter "Quality, 2 Reliability".
Short circuit or open circuit
Capacitance change ∆C/C
Dissipation factor tan δ
Insulation resistance Rins
or time constant τ = CR Rins
1) Test criteria must be met after exposure to damp heat for 21 days
Please read Cautions and warnings and
Important notes at the end of this document.
125 °C
+125 °C
55 °C
+85 °C
Page 12 of 32
> 10%
> 2 upper limit value
< 150 MΩ (CR ≤ 0.33 µF)
< 50 s
(CR > 0.33 µF)
B32560 ... B32564
General purpose (stacked) SilverCapTM
Pulse handling capability
"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal
voltages, expressed in V/µs.
"k0" represents the maximum permissible pulse characteristic of the waveform applied to the
capacitor, expressed in V2/µs.
Note:
The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the
capacitor.
dV/dt values
Lead spacing
VR
VRMS
V DC V AC
63
40
100
63
250
160
400
200
420
200
630
350
630
400
1000
500
7.5 mm
10 mm
15 mm
22.5 mm
27.5 mm
dV/dt in V/µs
120
150
200
275
320
360
60
75
150
175
320
50
100
125
150
50
100
125
25
50
60
60
7.5 mm
10 mm
15 mm
22.5 mm
27.5 mm
k0 in V2/µs
15 000
30 000
100 000
220 000
400 000
720 000
7500
15 000
75 000
140 000
400 000
10 000
50 000
100 000
190 000
10 000
50 000
100 000
5 000
25 000
50 000
50 000
k0 values
Lead spacing
VR
VRMS
V DC V AC
63
40
100
63
250
160
400
200
420
200
630
350
630
400
1000
500
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 32
B32560 ... B32564
General purpose (stacked) SilverCapTM
Impedance Z versus frequency f
(typical values)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 32
B32560
General purpose (stacked) SilverCapTM
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 7.5 mm
63 V DC/40 V AC
100 V DC/63 V AC
250 V DC/160 V AC
400 V DC/200 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 15 of 32
B32560
General purpose (stacked) SilverCapTM
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 7.5 mm
630 V DC/400 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
1000 V DC/500 V AC
Page 16 of 32
B32561
General purpose (stacked) SilverCapTM
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 10 mm
63 V DC/40 V AC
100 V DC/63 V AC
250 V DC/160 V AC
400 V DC/200 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 17 of 32
B32561
General purpose (stacked) SilverCapTM
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 10 mm
630 V DC/350 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 18 of 32
B32562
General purpose (stacked) SilverCapTM
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 15 mm
100 V DC/63 V AC
250 V DC/160 V AC
400 V DC/200 V AC
630 V DC/350 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 19 of 32
B32563
General purpose (stacked) SilverCapTM
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 22.5 mm
100 V DC/63 V AC
250 V DC/160 V AC
400 V DC/200 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 20 of 32
B32564
General purpose (stacked) SilverCapTM
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 27.5 mm
100 V DC/63 V AC
250 V DC/160 V AC
400 V DC/200 V AC
420 V DC/200 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 21 of 32
B32560 ... B32564
General purpose (stacked) SilverCapTM
Mounting guidelines
1
Soldering
1.1
Solderability of leads
The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1.
Before a solderability test is carried out, terminals are subjected to accelerated ageing (to
IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far
higher than the upper category temperature of the capacitors, the terminal wires should be cut off
from the capacitor before the ageing procedure to prevent the solderability being impaired by the
products of any capacitor decomposition that might occur.
Solder bath temperature
235 ±5 °C
Soldering time
2.0 ±0.5 s
Immersion depth
2.0 +0/0.5 mm from capacitor body or seating plane
Evaluation criteria:
Visual inspection
Wetting of wire surface by new solder ≥90%, free-flowing solder
1.2
Resistance to soldering heat
Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A.
Conditions:
Series
Solder bath temperature Soldering time
MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C
coated
uncoated (lead spacing > 10 mm)
MFP
MKP (lead spacing > 7.5 mm)
MKT boxed (case 2.5 × 6.5 × 7.2 mm)
MKP (lead spacing ≤ 7.5 mm)
MKT uncoated (lead spacing ≤ 10 mm)
insulated (B32559)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 22 of 32
10 ±1 s
5 ±1 s