Film Capacitor
Metallized polypropylene Film Capacitor
Series/Type:
B32714H ... B32718H
Date:
July 2022
TDK Electronics AG 2022. Reproduction, publication and dissemination of this publication, enclosures hereto
and the information contained therein without TDK Electronics’ prior express consent is prohibited.
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Typical applications
Frequency converters
Industrial and high-end power supplies
Solar inverters
Climatic
Max. operating temperature: 105 °C (case)
Climatic category (IEC 60068-1: 55/105/56
40/105/56
Construction
Dielectric: polypropylene (MKP)
Plastic case (UL 94 V-0)
Epoxy resin sealing (UL 94 V-0)
Features
Capacitance values up 0.47 μF to 170 μF
High CV product, compact
Good self-healing properties
Over-voltage capability
Low losses with high current capability
High reliability
Long useful life
RoHS-compatible
UL 810 construction
AEC-Q200D compliant
Terminals
Parallel wire leads, lead-free tinned
2-pin, 4-pin
Standard lead lengths: 6 –1 mm
Marking
Manufacturer's logo and lot number, date code,
rated rated capacitance (coded), capacitance
tolerance (code letter) and rated DC voltage
Delivery mode
Bulk (untaped)
Approval
Approval mark
Standards
UL 810 (construction only)
Please read Cautions and warnings and
Important notes at the end of this document.
2
Certificate
E323128
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Dimensional drawings
Number of wires
2-pin
2-pin
4-pin
4-pin
Lead spacing e ±0.4
27.5
37.5
37.5
52.5
Lead diameter d1 ±0.05
0.8
1.0
1.2
1.2
Type
B32714H
B32716H
B32716H
B32718H
Dimensions in mm
Dimensional drawings 2-pin versions
B32714H, B32716H
Lead spacing e ±0.4:
Lead diameter d1:
B32714H
B32716H
27.5
37.5
0.8
1.0
Dimensions in mm
B32716H (low profile)
Lead spacing e ±0.4:
Lead diameter d1:
37.5
1.0
Dimensions in mm
Please read Cautions and warnings and
Important notes at the end of this document.
3
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Dimensional drawings 4-pin versions
B32716H, B32718H
Lead spacing e ±0.4:
Lead diameter d1:
B32716H
B32718H
37.5
52.5
1.2
1.2
Dimensions in mm
Please read Cautions and warnings and
Important notes at the end of this document.
4
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Overview of available types
Lead spacing
Type
VR (85 °C)
27.5 mm
B32714H
500
600
800
900
1000
CR (µF)
0.47
0.56
0.68
0.82
1.0
1.5
2.0
2.2
2.5
3.0
3.3
4.0
5.0
6.0
7.0
8.0
9.0
10
12
14
15
16
22
Please read Cautions and warnings and
Important notes at the end of this document.
5
7/22
1100
1200
1400
1500
1600
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Overview of available types
Lead spacing
Type
VR (85 °C)
CR (µF)
1.0
1.5
2.0
2.7
3.3
3.5
3.9
4.0
4.5
5.0
6.0
6.8
7.0
7.5
8.0
8.5
9
10
12
14
15
16
18
20
22
25
30
35
40
45
50
60
65
85
120
500
600
800
Please read Cautions and warnings and
Important notes at the end of this document.
37.5 mm
B32716H
1000 1100
900
6
7/22
1200
1400
1500
1600
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Overview of available types
Lead spacing
Type
VR (85 °C)
CR (µF)
8.0
10
12
15
18
20
22
25
27
30
33
35
40
45
47
50
55
58
60
65
70
75
80
85
90
95
100
110
120
130
140
150
170
500
600
800
Please read Cautions and warnings and
Important notes at the end of this document.
52.5 mm
B32718H
1000 1100
900
7
7/22
1200
1400
1500
1600
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Ordering codes and packing units (lead spacing 27.5 mm)
CR1) Max. dimensions
wxhxl
P1
Ordering code
(composition see
below)
µF
mm
mm
VR,85 °C = 500 V DC, Vop,100 °C = 400 V DC
IRMS,max
70 °C
10 kHz
A
IRMS,max2)
85 °C
10 kHz
A
ESRtyp ESLtyp3)
85 °C
10 kHz
nH
m
tan
max
1 kHz
10-3
tan
Pcs./
max
MOQ
10 kHz
10-3
3.3 9.0x18.0x31.5
– B32714H5335+000
5.0 11.0x21.0x31.5
– B32714H5505+000
6.0 12.5x21.5x31.5
– B32714H5605+000
7.0 13.5x23.0x31.5
– B32714H5705+000
8.0 14.0x24.5x31.5
– B32714H5805+000
10.0 15.0x24.5x31.5
– B32714H5106+000
12.0 18.0x27.5x31.5
– B32714H5126+000
15.0 18.0x33.0x31.5
– B32714H5156+000
16.0 21.0x31.0x31.5
– B32714H5166+000
22.0 22.0x36.5x31.5
*) B32714H5226+000
VR,85 °C = 600 V DC, Vop,100 °C = 480 V DC
4.5
6.3
7.0
7.8
8.6
9.5
11.4
12.8
13.7
14.0
3.9
5.5
6.1
6.8
7.5
8.3
9.9
11.1
11.9
13.6
16.0
10.8
9.2
8.1
7.2
6.1
5.2
4.5
4.2
3.6
12.0
14.0
15.0
16.0
17.0
18.0
19.0
21.0
21.0
23.0
0.8
0.8
0.8
0.9
0.9
0.9
0.9
0.9
1.0
1.1
6.6
6.8
6.9
7.1
7.2
7.7
7.8
8.5
8.5
9.9
2400
2352
2100
1932
1848
1680
1428
952
784
784
2.2
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
15.0
4.0
6.2
7.2
8.1
8.6
10.0
10.6
11.5
12.5
14.0
3.5
5.4
6.3
7.0
7.5
8.7
9.2
10.0
10.9
13.0
20.0
11.0
9.4
8.2
7.5
6.7
6.0
5.5
4.7
4.0
12.0
14.0
16.0
17.0
17.0
19.0
19.0
21.0
21.0
23.0
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.9
0.9
5.5
5.6
5.9
6.2
6.6
6.7
6.8
6.9
7.1
7.5
2400
2352
1932
1848
1680
1428
1428
952
952
784
9.0x18.0x31.5
11.0x21.0x31.5
13.5x23.0x31.5
14.0x24.5x31.5
15.0x24.5x31.5
18.0x27.5x31.5
18.0x27.5x31.5
18.0x33.0x31.5
18.0x33.0x31.5
22.0x36.5x31.5
–
–
–
–
–
–
–
–
–
*)
B32714H6225+000
B32714H6405+000
B32714H6505+000
B32714H6605+000
B32714H6705+000
B32714H6805+000
B32714H6905+000
B32714H6106+000
B32714H6126+000
B32714H6156+000
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Intermediate capacitance values are available on request.
*) 4-pin version available on request
Composition of ordering code
+ = Capacitance tolerance code:
J = ±5%
K = ±10%
*** = Packing code
000 = untaped (lead length 6 –1 mm)
Other lead lengths available upon request
1) Capacitance value measured at 1 kHz.
2) Max ripple current IRMS at 85 °C, 10 kHz for T ≤15 °C, Capacitor body temperature (ambient temperature +
self-heating) must be observed for maximum voltage rating. Refer to voltage derating rules in page 20.
3) Typical ESL value measured at resonance frequency (see specific graphs of Z versus frequency).
Please read Cautions and warnings and
Important notes at the end of this document.
8
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Ordering codes and packing units (lead spacing 27.5 mm)
CR1) Max. dimensions
wxhxl
P1
Ordering code
(composition see
below)
mm
mm
µF
VR,85 °C = 800 V DC, Vop,100 °C = 640 V DC
IRMS,max
70 °C
10 kHz
A
IRMS,max2)
85 °C
10 kHz
A
ESRtyp ESLtyp3)
85 °C
10 kHz
nH
m
tan
max
1 kHz
10-3
tan
Pcs./
max
MOQ
10 kHz
10-3
2.0 9.0x18.0x31.5
– B32714H8205K000
3.0 11.0x21.0x31.5
– B32714H8305+000
4.0 13.5x23.0x31.5
– B32714H8405+000
5.0 14.0x24.5x31.5
– B32714H8505+000
6.0 16.0x30.0x31.5
– B32714H8605+000
7.0 16.0x30.0x31.5
– B32714H8705+000
8.0 18.0x33.0x31.5
– B32714H8805+000
9.0 18.0x33.0x31.5
– B32714H8905+000
10.0 21.0x31.0x31.5
– B32714H8106+000
12.0 22.0x36.5x31.5
*) B32714H8126+000
14.0 22.0x36.5x31.5
*) B32714H8146K000
VR,85 °C = 900 V DC, Vop,100 °C = 720 V DC
3.9
5.6
6.9
7.8
8.9
9.5
10.9
11.5
12.2
13.8
14.0
3.4
4.9
6.0
6.8
7.7
8.3
9.5
10.0
10.6
12.0
12.5
20.8
13.5
10.3
8.8
7.4
6.4
6.1
5.6
5.2
4.7
4.4
12.0
14.0
16.0
17.0
20.0
20.0
21.0
21.0
21.0
23.0
23.0
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.9
0.9
5.2
5.2
5.3
5.5
5.6
5.7
6.1
6.3
6.6
7.1
7.5
2400
2352
1932
1848
1064
1064
952
952
784
784
784
2.5 12.5x21.5x31.5
– B32714H9255+000
3.0 13.5x23.0x31.5
– B32714H9305+000
4.0 15.0x24.5x31.5
– B32714H9405+000
5.0 16.0x30.0x31.5
– B32714H9505+000
6.0 18.0x33.0x31.5
– B32714H9605+000
7.0 21.0x31.0x31.5
– B32714H9705+000
10.0 22.0x36.5x31.5
– B32714H9106+000
VR,85 °C = 1000 V DC, Vop,100 °C = 800 V DC
5.8
6.2
7.6
8.6
10.5
11.5
14.0
5.0
5.4
6.6
7.5
9.1
10.0
12.2
14.0
12.6
9.5
7.8
6.7
5.9
4.5
15.0
16.0
17.0
20.0
21.0
21.0
23.0
0.8
0.8
0.8
0.8
0.8
0.8
0.8
4.4
4.7
4.8
4.9
5.1
5.3
5.7
2100
1932
1680
1064
952
784
784
2.0
3.0
4.0
5.0
7.0
8.0
5.4
7.2
8.5
10.5
13.1
13.6
4.7
6.3
7.4
9.1
11.4
11.8
15.6
10.6
8.1
6.7
5.2
4.8
15.0
17.0
20.0
21.0
23.0
23.0
0.8
0.8
0.8
0.8
0.8
0.8
3.9
4.0
4.1
4.2
4.6
4.8
2100
1680
1064
952
784
784
12.5x21.5x31.5
15.0x24.5x31.5
16.0x30.0x31.5
18.0x33.0x31.5
22.0x36.5x31.5
22.0x36.5x31.5
–
–
–
–
*)
*)
B32714H0205+000
B32714H0305+000
B32714H0405+000
B32714H0505+000
B32714H0705+000
B32714H0805+000
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Intermediate capacitance values are available on request.
*) 4-pin version available on request
Composition of ordering code
+ = Capacitance tolerance code:
J = ±5%
K = ±10%
*** = Packing code
000 = untaped (lead length 6 –1 mm)
Other lead lengths available upon request
1) Capacitance value measured at 1 kHz.
2) Max ripple current IRMS at 85 °C, 10 kHz for T ≤15 °C, Capacitor body temperature (ambient temperature +
self-heating) must be observed for maximum voltage rating. Refer to voltage derating rules in page 20.
3) Typical ESL value measured at resonance frequency (see specific graphs of Z versus frequency).
Please read Cautions and warnings and
Important notes at the end of this document.
9
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Ordering codes and packing units (lead spacing 27.5 mm)
CR1) Max. dimensions
wxhxl
P1
Ordering code
(composition see
below)
µF
mm
mm
VR,85 °C = 1100 V DC, Vop,100 °C = 880 V DC
IRMS,max
70 °C
10 kHz
A
IRMS,max2)
85 °C
10 kHz
A
ESRtyp ESLtyp3)
85 °C
10 kHz
nH
m
tan
max
1 kHz
10-3
tan
Pcs./
max
MOQ
10 kHz
10-3
1.0 11.0x19.0x31.5
–
B32714H1105+000
1.5 12.5x21.5x31.5
–
B32714H1155+000
2.0 13.5x23.0x31.5
–
B32714H1205+000
3.0 16.0x30.0x31.5
–
B32714H1305+000
4.0 18.0x33.0x31.5
–
B32714H1405+000
5.0 21.0x31.0x31.5
–
B32714H1505+000
6.0 22.0x36.5x31.5
*)
B32714H1605+000
VR,85 °C = 1200 V DC, Vop,100 °C = 960 V DC
3.7
4.9
5.9
7.7
9.9
11.3
13.0
3.2
4.3
5.1
6.7
8.6
9.8
11.3
27.0
18.6
14.1
9.7
7.5
6.1
5.3
12.0
15.0
16.0
20.0
21.0
21.0
23.0
0.8
0.8
0.8
0.8
0.8
0.8
0.8
3.4
3.5
3.6
3.7
3.8
3.9
4.0
2352
2100
1932
1064
952
784
784
1.0 11.0x21.0x31.5
–
B32714H2105+000
1.5 12.5x21.5x31.5
–
B32714H2155K000
2.0 15.0x24.5x31.5
–
B32714H2205+000
3.0 16.0x30.0x31.5
–
B32714H2305K000
4.0 18.0x33.0x31.5
–
B32714H2405K000
5.0 22.0x36.5x31.5
*)
B32714H2505+000
VR,85 °C = 1400 V DC, Vop,100 °C = 1120 V DC
4.1
5.1
6.6
8.2
10.4
12.7
3.6
4.4
5.7
7.1
9.0
11.0
24.7
17.7
12.9
8.7
6.8
5.5
15.0
15.0
17.0
20.0
21.0
23.0
0.8
0.8
0.8
0.8
0.8
0.8
3.3
3.4
3.4
3.5
3.5
3.6
2352
2100
1680
1064
952
784
0.56
0.68
1.0
1.5
2.0
3.0
4.0
3.3
3.9
4.8
6.3
8.2
11.2
12.3
2.9
3.4
4.2
5.5
7.1
9.7
10.7
33.0
27.7
19.9
13.6
10.2
7.1
5.8
13.0
15.0
15.0
17.0
19.0
23.0
23.0
0.8
0.8
0.8
0.8
0.8
0.8
0.8
2.4
2.4
2.5
2.6
2.7
2.8
3.0
2352
2352
2100
1680
1428
784
784
11.0x19.0x31.5
11.0x21.0x31.5
12.5x21.5x31.5
15.0x24.5x31.5
18.0x27.5x31.5
22.0x36.5x31.5
22.0x36.5x31.5
–
–
–
–
–
*)
*)
B32714H4564+000
B32714H4684+000
B32714H4105K000
B32714H4155K000
B32714H4205+000
B32714H4305+000
B32714H4405K000
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Intermediate capacitance values are available on request.
*) 4-pin version available on request
Composition of ordering code
+ = Capacitance tolerance code:
J = ±5%
K = ±10%
*** = Packing code
000 = untaped (lead length 6 –1 mm)
Other lead lengths available upon request
1) Capacitance value measured at 1 kHz.
2) Max ripple current IRMS at 85 °C, 10 kHz for T ≤15 °C, Capacitor body temperature (ambient temperature +
self-heating) must be observed for maximum voltage rating. Refer to voltage derating rules in page 20.
3) Typical ESL value measured at resonance frequency (see specific graphs of Z versus frequency).
Please read Cautions and warnings and
Important notes at the end of this document.
10
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Ordering codes and packing units (lead spacing 27.5 mm)
CR1) Max. dimensions
wxhxl
P1
Ordering code
(composition see
below)
µF
mm
mm
VR,85 °C = 1500 V DC, Vop,100 °C = 1200 V DC
IRMS,max
70 °C
10 kHz
A
IRMS,max2)
85 °C
10 kHz
A
ESRtyp ESLtyp3)
85 °C
10 kHz
nH
m
tan
max
1 kHz
10-3
tan
Pcs./
max
MOQ
10 kHz
10-3
0.47 11.0x19.0x31.5
–
B32714H7474+000
0.68 12.5x21.5x31.5
–
B32714H7684+000
1.0 15.0x24.5x31.5
–
B32714H7105+000
1.5 18.0x27.5x31.5
–
B32714H7155+000
2.0 21.0x31.0x31.5
–
B32714H7205+000
3.0 22.0x36.5x31.5
*)
B32714H7305K000
VR,85 °C = 1600 V DC, Vop,100 °C = 1280 V DC
3.2
4.3
5.6
7.5
9.3
11.7
2.8
3.7
4.9
6.5
8.1
10.2
35.0
25.0
17.3
11.9
9.0
6.5
13.0
14.0
17.0
19.0
21.0
23.0
0.8
0.8
0.8
0.8
0.8
0.8
2.2
2.2
2.2
2.3
2.3
2.5
2352
2100
1680
1428
784
784
0.47
0.56
0.68
0.82
1.0
1.5
2.0
3.8
4.1
4.9
5.4
6.6
8.2
10.2
3.3
3.6
4.3
4.7
5.7
7.1
8.9
30.0
27.0
22.3
19.0
15.8
11.0
8.5
13.0
14.0
17.0
17.0
19.0
21.0
23.0
0.8
0.8
0.8
0.8
0.8
0.8
0.8
2.0
2.0
2.1
2.1
2.2
2.2
2.2
2352
2100
1848
1680
1428
952
784
11.0x21.0x31.5
12.5x21.5x31.5
14.0x24.5x31.5
15.0x24.5x31.5
18.0x27.5x31.5
18.0x33.0x31.5
22.0x36.5x31.5
–
–
–
–
–
–
*)
B32714H3474+000
B32714H3564+000
B32714H3684+000
B32714H3824+000
B32714H3105+000
B32714H3155+000
B32714H3205+000
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Intermediate capacitance values are available on request.
*) 4-pin version available on request
Composition of ordering code
+ = Capacitance tolerance code:
J = ±5%
K = ±10%
*** = Packing code
000 = untaped (lead length 6 –1 mm)
Other lead lengths available upon request
1) Capacitance value measured at 1 kHz.
2) Max ripple current IRMS at 85 °C, 10 kHz for T ≤15 °C, Capacitor body temperature (ambient temperature +
self-heating) must be observed for maximum voltage rating. Refer to voltage derating rules in page 20.
3) Typical ESL value measured at resonance frequency (see specific graphs of Z versus frequency).
Please read Cautions and warnings and
Important notes at the end of this document.
11
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Ordering codes and packing units (lead spacing 37.5 mm)
CR1)
Max. dimensions P1
wxhxl
Ordering code
(composition see
below)
µF
mm
mm
VR,85 °C = 500 V DC, Vop,100 °C = 400 V DC
IRMS,max
70 °C
10 kHz
A
IRMS,max2)
85 °C
10 kHz
A
ESRtyp ESLtyp3)
85 °C
10 kHz
nH
m
tan
max
1 kHz
10-3
tan
Pcs./
max
MOQ
10 kHz
10-3
12.0 24.0x15.0x42.0
– B32716H5126K000
16.0 24.0x19.0x42.0
– B32716H5166K000
30.0 20.0x39.5x42.0 10.2 B32716H5306+000
35.0 28.0x37.0x42.0 10.2 B32716H5356+000
40.0 28.0x37.0x42.0 10.2 B32716H5406+000
50.0 28.0x42.5x42.0 10.2 B32716H5506+000
60.0 30.0x45.0x42.0 20.3 B32716H5606+000
65.0 33.0x48.0x42.0 20.3 B32716H5656+000
120.0 42.5x60.0x42.5 20.3 B32716H5127K000
VR,85 °C = 600 V DC, Vop,100 °C = 480 V DC
8.2
9.5
16.0
18.3
19.6
22.2
25.3
27.5
35.0
7.1
8.3
13.9
15.9
17.0
19.3
22.0
24.0
31.0
10.0
7.5
4.3
3.8
3.3
2.8
2.4
2.2
1.8
12.0
13.0
13.0
14.0
13.0
14.0
15.0
16.5
19.0
1.5
1.6
1.6
1.7
1.7
1.8
1.8
1.8
2.7
13.9
13.9
15.0
15.5
15.6
16.2
16.6
16.7
25.1
1040
780
640
440
440
440
400
180
140
8.5
12.0
25.0
30.0
35.0
45.0
50.0
85.0
7.6
9.3
15.6
19.3
21.9
24.2
26.5
34.0
6.6
8.1
13.6
16.8
19.0
21.0
23.0
30.0
11.6
8.5
4.5
3.4
2.9
2.6
2.4
1.9
12.0
13.0
13.0
14.0
14.5
15.5
17.0
18.0
1.3
1.3
1.4
1.4
1.4
1.5
1.5
1.9
11.5
11.9
12.1
11.9
12.0
13.6
14.0
18.8
1040
780
640
440
440
400
180
140
24.0x15.0x42.0
24.0x19.0x42.0
20.0x39.5x42.0
28.0x37.0x42.0
28.0x42.5x42.0
30.0x45.0x42.0
33.0x48.0x42.0
42.5x60.0x42.5
–
–
10.2
10.2
10.2
20.3
20.3
20.3
B32716H6855+000
B32716H6126K000
B32716H6256K000
B32716H6306+000
B32716H6356+000
B32716H6456K000
B32716H6506+000
B32716H6856K000
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Intermediate capacitance values are available on request.
*) 4-pin version available on request
Composition of ordering code
+ = Capacitance tolerance code:
J = ±5%
K = ±10%
*** = Packing code
000 = untaped (lead length 6 –1 mm)
Other lead lengths available upon request
1) Capacitance value measured at 1 kHz.
2) Max ripple current IRMS at 85 °C, 10 kHz for T ≤15 °C, Capacitor body temperature (ambient temperature +
self-heating) must be observed for maximum voltage rating. Refer to voltage derating rules in page 20.
3) Typical ESL value measured at resonance frequency (see specific graphs of Z versus frequency).
Please read Cautions and warnings and
Important notes at the end of this document.
12
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Ordering codes and packing units (lead spacing 37.5 mm)
CR1) Max. dimensions P1
wxhxl
Ordering code
(composition see
below)
mm
µF mm
VR,85 °C = 800 V DC, Vop,100 °C = 640 V DC
IRMS,max
70 °C
10 kHz
A
IRMS,max2)
85 °C
10 kHz
A
ESRtyp ESLtyp3)
85 °C
10 kHz
nH
m
tan
max
1 kHz
10-3
tan
Pcs./
max
MOQ
10 kHz
10-3
6.8 24.0x15.0x42.0
– B32716H8685+000
8.5 24.0x19.0x42.0
– B32716H8855+000
14.0 18.0x32.5x42.0
– B32716H8146K000
15.0 20.0x39.5x42.0 10.2 B32716H8156+000
20.0 28.0x37.0x42.0 10.2 B32716H8206+000
22.0 28.0x37.0x42.0 10.2 B32716H8226+000
25.0 28.0x42.5x42.0 10.2 B32716H8256+000
30.0 30.0x45.0x42.0 20.3 B32716H8306+000
35.0 33.0x48.0x42.0 20.3 B32716H8356+000
65.0 42.5x60.0x42.5 20.3 B32716H8656K000
VR,85 °C = 900 V DC, Vop,100 °C = 720 V DC
7.4
8.5
11.8
13.8
16.1
16.9
18.7
21.5
24.2
33.0
6.4
7.4
10.3
12.0
14.0
14.7
16.3
18.7
21.0
28.8
12.3
10.0
6.4
5.8
4.8
4.4
3.9
3.3
2.9
2.1
12.0
13.0
20.0
13.0
14.0
14.0
15.0
15.5
16.5
18.5
1.1
1.1
1.2
1.2
1.2
1.3
1.3
1.3
1.3
1.7
9.7
9.9
10.4
10.1
11.2
11.3
11.4
11.5
11.8
15.9
1040
780
720
640
440
440
440
400
180
140
5.0
7.5
15.0
18.0
20.0
22.0
25.0
30.0
50.0
6.7
8.4
14.0
16.2
17.3
19.0
21.2
24.2
32.0
5.8
7.3
12.2
14.1
15.0
16.5
18.4
21.0
28.0
15.0
10.5
5.6
4.8
4.3
3.8
3.4
2.9
2.2
12.0
13.0
12.5
13.5
14.0
15.0
16.0
17.0
19.0
1.0
1.1
1.1
1.2
1.1
1.1
1.2
1.2
1.4
8.8
9.2
9.8
10.0
10.0
9.8
9.9
10.1
12.8
1040
780
640
440
440
440
400
180
140
24.0x15.0x42.0
24.0x19.0x42.0
20.0x39.5x42.0
28.0x37.0x42.0
28.0x37.0x42.0
28.0x42.5x42.0
30.0x45.0x42.0
33.0x48.0x42.0
42.5x60.0x42.5
–
–
10.2
10.2
10.2
10.2
20.3
20.3
20.3
B32716H9505+000
B32716H9755K000
B32716H9156K000
B32716H9186+000
B32716H9206K000
B32716H9226K000
B32716H9256+000
B32716H9306+000
B32716H9506+000
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Intermediate capacitance values are available on request.
*) 4-pin version available on request
Composition of ordering code
+ = Capacitance tolerance code:
J = ±5%
K = ±10%
*** = Packing code
000 = untaped (lead length 6 –1 mm)
Other lead lengths available upon request
1) Capacitance value measured at 1 kHz.
2) Max ripple current IRMS at 85 °C, 10 kHz for T ≤15 °C, Capacitor body temperature (ambient temperature +
self-heating) must be observed for maximum voltage rating. Refer to voltage derating rules in page 20.
3) Typical ESL value measured at resonance frequency (see specific graphs of Z versus frequency).
Please read Cautions and warnings and
Important notes at the end of this document.
13
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Ordering codes and packing units (lead spacing 37.5 mm)
CR1) Max. dimensions P1
wxhxl
Ordering code
(composition see
below)
mm
µF mm
VR,85 °C = 1000 V DC, Vop,100 °C = 800 V DC
IRMS,max
70 °C
10 kHz
A
IRMS,max2)
85 °C
10 kHz
A
ESRtyp ESLtyp3)
85 °C
10 kHz
nH
m
tan
max
1 kHz
10-3
tan
Pcs./
max
MOQ
10 kHz
10-3
3.9 24.0x15.0x42.0
– B32716H0395+000
5.0 24.0x19.0x42.0
– B32716H0505+000
12.0 20.0x39.5x42.0 10.2 B32716H0126K000
14.0 28.0x37.0x42.0 10.2 B32716H0146+000
15.0 24.0x44.0x42.0 12.7 B32716H0156+000
16.0 28.0x42.5x42.0 10.2 B32716H0166+000
20.0 30.0x45.0x42.0 20.3 B32716H0206+000
22.0 33.0x48.0x42.0 20.3 B32716H0226+000
40.0 42.5x60.0x42.5 20.3 B32716H0406+000
VR,85 °C = 1100 V DC, Vop,100 °C = 880 V DC
6.3
7.4
14.1
15.5
16.3
17.3
20.0
22.2
29.5
5.5
6.4
12.3
13.5
14.2
15.0
17.4
19.3
25.8
17.0
13.5
6.3
5.3
4.9
4.6
3.8
3.4
2.6
11.5
13.0
13.5
14.0
15.0
15.5
16.0
17.0
19.0
0.9
0.9
1.0
1.0
1.0
1.0
1.1
1.1
1.3
7.7
7.9
8.7
8.7
8.6
8.6
8.9
8.9
12.1
1040
780
640
440
520
440
400
180
140
3.5
4.5
8.0
10.0
12.0
15.0
16.0
20.0
30.0
6.2
7.2
11.7
13.9
15.4
18.4
19.6
22.2
28.6
5.4
6.3
10.2
12.1
13.4
16.0
17.0
19.3
24.9
17.5
14.0
8.0
6.5
5.5
4.5
4.0
3.4
2.8
12.0
13.0
13.0
14.0
15.0
16.0
16.0
17.5
19.0
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
1.1
7.2
7.4
7.5
7.6
7.7
7.9
7.8
8.0
9.8
1040
780
640
440
520
400
400
180
140
24.0x15.0x42.0
24.0x19.0x42.0
20.0x39.5x42.0
28.0x37.0x42.0
24.0x44.0x42.0
30.0x45.0x42.0
30.0x45.0x42.0
33.0x48.0x42.0
42.5x60.0x42.5
–
–
10.2
10.2
12.7
20.3
20.3
20.3
20.3
B32716H1355+000
B32716H1455+000
B32716H1805+000
B32716H1106+000
B32716H1126+000
B32716H1156+000
B32716H1166+000
B32716H1206+000
B32716H1306+000
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Intermediate capacitance values are available on request.
*) 4-pin version available on request
Composition of ordering code
+ = Capacitance tolerance code:
J = ±5%
K = ±10%
*** = Packing code
000 = untaped (lead length 6 –1 mm)
Other lead lengths available upon request
1) Capacitance value measured at 1 kHz.
2) Max ripple current IRMS at 85 °C, 10 kHz for T ≤15 °C, Capacitor body temperature (ambient temperature +
self-heating) must be observed for maximum voltage rating. Refer to voltage derating rules in page 20.
3) Typical ESL value measured at resonance frequency (see specific graphs of Z versus frequency).
Please read Cautions and warnings and
Important notes at the end of this document.
14
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Ordering codes and packing units (lead spacing 37.5 mm)
CR1) Max. dimensions P1
wxhxl
Ordering code
(composition see
below)
mm
µF mm
VR,85 °C = 1200 V DC, Vop,100 °C = 960 V DC
IRMS,max
70 °C
10 kHz
A
IRMS,max2)
85 °C
10 kHz
A
ESRtyp ESLtyp3)
85 °C
10 kHz
nH
m
tan
max
1 kHz
10-3
tan
Pcs./
max
MOQ
10 kHz
10-3
2.7 24.0x15.0x42.0
– B32716H2275+000
3.5 24.0x19.0x42.0
– B32716H2355+000
8.0 20.0x39.5x42.0 10.2 B32716H2805+000
10.0 28.0x37.0x42.0 10.2 B32716H2106+000
12.0 28.0x42.5x42.0 10.2 B32716H2126+000
14.0 30.0x45.0x42.0 20.3 B32716H2146+000
16.0 33.0x48.0x42.0 20.3 B32716H2166+000
25.0 42.5x60.0x42.5 20.3 B32716H2256+000
VR,85 °C = 1400 V DC, Vop,100 °C = 1120 V DC
6.0
7.0
12.3
14.6
16.4
18.6
20.7
28.0
5.2
6.1
10.7
12.7
14.3
16.2
18.0
24.5
19.2
15.0
7.3
5.9
5.1
4.4
3.9
2.9
11.5
13.0
13.0
14.0
15.0
16.0
17.0
19.0
0.8
0.8
0.8
0.8
0.9
0.9
0.9
1.0
6.1
6.2
6.8
6.9
7.2
7.2
7.3
8.5
1040
780
640
440
440
400
180
140
2.0
2.7
5.0
7.0
8.0
10.0
12.0
20.0
5.6
6.7
10.8
13.8
15.2
17.1
19.9
27.0
4.9
5.8
9.4
12.0
13.2
14.9
17.3
23.6
21.2
16.5
9.4
6.7
6.0
5.2
4.3
3.1
11.5
12.5
13.0
14.0
15.0
16.0
17.0
19.0
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.9
5.0
5.2
5.5
5.5
5.6
6.1
6.1
7.3
1040
780
640
440
440
400
180
140
24.0x15.0x42.0
24.0x19.0x42.0
20.0x39.5x42.0
28.0x37.0x42.0
28.0x42.5x42.0
30.0x45.0x42.0
33.0x48.0x42.0
42.5x60.0x42.5
–
–
10.2
10.2
10.2
20.3
20.3
20.3
B32716H4205+000
B32716H4275+000
B32716H4505+000
B32716H4705+000
B32716H4805+000
B32716H4106+000
B32716H4126K000
B32716H4206K000
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Intermediate capacitance values are available on request.
*) 4-pin version available on request
Composition of ordering code
+ = Capacitance tolerance code:
J = ±5%
K = ±10%
*** = Packing code
000 = untaped (lead length 6 –1 mm)
Other lead lengths available upon request
1) Capacitance value measured at 1 kHz.
2) Max ripple current IRMS at 85 °C, 10 kHz for T ≤15 °C, Capacitor body temperature (ambient temperature +
self-heating) must be observed for maximum voltage rating. Refer to voltage derating rules in page 20.
3) Typical ESL value measured at resonance frequency (see specific graphs of Z versus frequency).
Please read Cautions and warnings and
Important notes at the end of this document.
15
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Ordering codes and packing units (lead spacing 37.5 mm)
CR1) Max. dimensions P1
wxhxl
Ordering code
(composition see
below)
mm
µF mm
VR,85 °C = 1500 V DC, Vop,100 °C = 1200 V DC
IRMS,max
70 °C
10 kHz
A
IRMS,max2)
85 °C
10 kHz
A
ESRtyp ESLtyp3)
85 °C
10 kHz
nH
m
tan
max
1 kHz
10-3
tan
Pcs./
max
MOQ
10 kHz
10-3
1.5 24.0x15.0x42.0
– B32716H7155+000
2.0 24.0x19.0x42.0
– B32716H7205+000
4.0 20.0x39.5x42.0 10.2 B32716H7405+000
5.0 28.0x37.0x42.0 10.2 B32716H7505+000
6.0 28.0x42.5x42.0 10.2 B32716H7605+000
7.0 30.0x45.0x42.0 20.3 B32716H7705+000
9.0 33.0x48.0x42.0 20.3 B32716H7905+000*
15.0 42.5x60.0x42.5 20.3 B32716H7156K000*
VR,85 °C = 1600 V DC, Vop,100 °C = 1280 V DC
5.3
6.3
10.4
12.4
14.3
16.1
18.2
25.3
4.6
5.5
9.0
10.8
12.4
14.0
15.8
22.0
24.0
18.3
10.3
8.2
6.8
5.9
5.1
3.6
11.5
13.0
13.5
14.0
15.0
16.0
17.0
19.0
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
4.3
4.3
4.8
4.8
4.8
4.9
5.3
6.3
1040
780
640
440
440
400
180
140
1.0
1.5
3.3
4.0
5.0
6.0
7.0
12.0
4.6
5.8
10.4
12.2
14.1
15.6
18.2
24.5
4.0
5.0
9.0
10.6
12.3
13.6
15.8
21.3
31.5
22.1
10.1
8.5
6.9
6.2
5.1
3.8
11.5
12.5
13.0
14.0
15.0
16.0
17.0
18.5
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
3.8
3.9
3.9
4.0
4.0
4.4
4.2
5.3
1040
780
640
440
440
400
180
140
24.0x15.0x42.0
24.0x19.0x42.0
20.0x39.5x42.0
28.0x37.0x42.0
28.0x42.5x42.0
30.0x45.0x42.0
33.0x48.0x42.0
42.5x60.0x42.5
–
–
10.2
10.2
10.2
20.3
20.3
20.3
B32716H3105+000
B32716H3155+000
B32716H3335+000
B32716H3405+000
B32716H3505+000
B32716H3605K000
B32716H3705+000
B32716H3126K000*
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Intermediate capacitance values are available on request.
*) 4-pin version available on request
Composition of ordering code
+ = Capacitance tolerance code:
J = ±5%
K = ±10%
*** = Packing code
000 = untaped (lead length 6 –1 mm)
Other lead lengths available upon request
1) Capacitance value measured at 1 kHz.
2) Max ripple current IRMS at 85 °C, 10 kHz for T ≤15 °C, Capacitor body temperature (ambient temperature +
self-heating) must be observed for maximum voltage rating. Refer to voltage derating rules in page 20.
3) Typical ESL value measured at resonance frequency (see specific graphs of Z versus frequency).
Please read Cautions and warnings and
Important notes at the end of this document.
16
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Ordering codes and packing units (lead spacing 52.5 mm)
CR1)
IRMS,max
70 °C
10 kHz
A
IRMS,max2)
85 °C
10 kHz
A
ESRtyp ESLtyp3)
85 °C
10 kHz
nH
m
tan
max
1 kHz
10-3
tan
Pcs./
max
MOQ
10 kHz
10-3
75.0 30.0x45.0x57.5 20.3 B32718H5756+000
80.0 30.0x45.0x57.5 20.3 B32718H5806+000
100.0 35.0x50.0x57.5 20.3 B32718H5107+000
110.0 35.0x50.0x57.5 20.3 B32718H5117K000
130.0 38.0x57.5x57.5 20.3 B32718H5137+000
150.0 45.0x55.0x57.5 20.3 B32718H5157+000
170.0 45.0x57.0x57.5 20.3 B32718H5177K000
VR,85 °C = 600 V DC, Vop,100 °C = 480 V DC
20.7
21.6
25.1
26.2
29.9
33.0
35.0
18.0
18.8
21.8
22.8
26.0
28.8
30.5
4.5
4.1
3.5
3.2
2.8
2.5
2.3
14.5
15.0
16.5
16.5
18.0
16.0
17.0
3.7
3.7
3.8
3.8
4.0
4.1
4.2
36.0
36.0
37.4
37.6
38.9
40.0
41.8
280
280
108
108
96
140
140
55.0 30.0x45.0x57.5 20.3 B32718H6556+000
60.0 30.0x45.0x57.5 20.3 B32718H6606+000
75.0 35.0x50.0x57.5 20.3 B32718H6756+000
80.0 35.0x50.0x57.5 20.3 B32718H6806+000
90.0 38.0x57.5x57.5 20.3 B32718H6906+000
95.0 38.0x57.5x57.5 20.3 B32718H6956+000
110.0 45.0x55.0x57.5 20.3 B32718H6117+000
120.0 45.0x57.0x57.5 20.3 B32718H6127+000
140.0 45.0x65.0x57.5 20.3 B32718H6147+000
VR,85 °C = 800 V DC, Vop,100 °C = 640 V DC
19.6
20.1
24.2
25.1
27.6
28.5
30.8
32.9
35.5
17.0
17.5
21.0
21.8
24.0
24.8
26.8
28.6
31.0
5.0
4.7
3.8
3.5
3.3
3.1
2.9
2.6
2.4
14.0
14.5
16.0
16.5
18.0
18.0
16.0
17.0
21.0
3.0
3.1
3.1
3.1
3.2
3.2
3.4
3.4
3.6
29.4
30.1
30.4
30.0
31.7
31.5
33.0
33.4
35.9
280
280
108
108
96
96
140
140
140
45.0
50.0
55.0
60.0
70.0
75.0
85.0
90.0
110.0
19.0
19.6
22.4
23.5
25.8
26.8
29.3
30.7
33.5
16.5
17.0
19.5
20.4
22.4
23.3
25.5
26.7
29.2
5.3
5.0
4.4
4.0
3.8
3.5
3.2
3.0
2.8
14.5
14.5
16.0
16.5
18.0
18.5
16.5
17.5
21.0
2.6
2.7
2.7
2.7
2.9
2.9
3.0
3.0
3.4
25.5
25.8
25.9
25.8
28.4
28.3
29.0
29.0
32.9
280
280
108
108
96
96
140
140
140
Max. dimensions P1
wxhxl
Ordering code
(composition see
below)
mm
mm
µF
VR,85 °C = 500 V DC, Vop,100 °C = 400 V DC
30.0x45.0x57.5
30.0x45.0x57.5
35.0x50.0x57.5
35.0x50.0x57.5
38.0x57.5x57.5
38.0x57.5x57.5
45.0x55.0x57.5
45.0x57.0x57.5
45.0x65.0x57.5
20.3
20.3
20.3
20.3
20.3
20.3
20.3
20.3
20.3
B32718H8456+000
B32718H8506K000
B32718H8556+000
B32718H8606+000
B32718H8706+000
B32718H8756+000
B32718H8856+000
B32718H8906+000
B32718H8117K000
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Intermediate capacitance values are available on request.
Composition of ordering code
+ = Capacitance tolerance code:
J = ±5%
K = ±10%
*** = Packing code
000 = untaped (lead length 6 –1 mm)
Other lead lengths available upon request
1) Capacitance value measured at 1 kHz.
2) Max ripple current IRMS at 85 °C, 10 kHz for T ≤15 °C, Capacitor body temperature (ambient temperature +
self-heating) must be observed for maximum voltage rating. Refer to voltage derating rules in page 20.
3) Typical ESL value measured at resonance frequency (see specific graphs of Z versus frequency).
Please read Cautions and warnings and
Important notes at the end of this document.
17
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Ordering codes and packing units (lead spacing 52.5 mm)
CR1) Max. dimensions P1
wxhxl
IRMS,max
70 °C
10 kHz
A
IRMS,max2)
85 °C
10 kHz
A
ESRtyp ESLtyp3)
85 °C
10 kHz
nH
m
tan
max
1 kHz
10-3
tan
Pcs./
max
MOQ
10 kHz
10-3
35.0 30.0x45.0x57.5
20.3 B32718H9356+000
45.0 35.0x50.0x57.5
20.3 B32718H9456+000
50.0 35.0x50.0x57.5
20.3 B32718H9506K000
55.0 38.0x57.5x57.5
20.3 B32718H9556+000
60.0 38.0x57.5x57.5
20.3 B32718H9606+000
65.0 45.0x55.0x57.5
20.3 B32718H9656+000
70.0 45.0x57.0x57.5
20.3 B32718H9706+000
85.0 45.0x65.0x57.5
20.3 B32718H9856K000
VR,85 °C = 1000 V DC, Vop,100 °C = 800 V DC
18.2
21.3
22.7
25.4
26.5
28.9
30.7
33.0
15.8
18.5
19.7
22.1
23.0
25.1
26.7
28.7
5.8
4.9
4.3
3.9
3.6
3.3
3.0
2.8
14.5
16.0
16.5
18.0
18.5
16.5
17.5
21.5
2.3
2.4
2.4
2.4
2.4
2.4
2.4
2.6
22.7
23.0
23.0
23.0
23.1
23.2
23.2
25.4
280
108
108
96
96
140
140
140
25.0 30.0x45.0x57.5
20.3 B32718H0256+000
30.0 30.0x45.0x57.5
20.3 B32718H0306K000
35.0 35.0x50.0x57.5
20.3 B32718H0356+000
40.0 35.0x50.0x57.5
20.3 B32718H0406+000
45.0 38.0x57.5x57.5
20.3 B32718H0456+000
50.0 38.0x57.5x57.5
20.3 B32718H0506+000
55.0 45.0x55.0x57.5
20.3 B32718H0556+000
58.0 45.0x57.0x57.5
20.3 B32718H0586+000
65.0 45.0x65.0x57.5
20.3 B32718H0656+000
VR,85 °C = 1100 V DC, Vop,100 °C = 880 V DC
16.2
17.5
20.5
21.6
24.7
25.8
28.1
29.7
31.9
14.1
15.2
17.8
18.8
21.5
22.4
24.4
25.8
27.7
7.2
6.0
5.3
4.7
4.1
3.8
3.5
3.2
3.0
14.5
15.0
16.5
16.5
18.0
18.5
17.0
18.5
21.5
2.0
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.2
19.5
19.9
19.9
20.0
20.0
20.3
20.6
20.6
20.9
280
280
108
108
96
96
140
140
140
22.0
25.0
27.0
30.0
35.0
40.0
45.0
55.0
16.1
16.9
19.2
20.6
22.9
24.5
27.3
30.8
14.0
14.7
16.7
17.9
19.9
21.3
23.7
26.8
7.4
6.7
6.0
5.2
4.8
4.2
3.8
3.2
14.5
15.0
16.0
16.0
18.0
18.5
19.0
21.0
1.8
1.8
1.8
1.8
1.8
1.9
1.9
2.0
17.5
17.6
17.6
17.7
17.9
18.0
18.3
18.8
280
280
108
108
96
96
140
140
Ordering code
(composition see
below)
mm
mm
µF
VR,85 °C = 900 V DC, Vop,100 °C = 720 V DC
30.0x45.0x57.5
30.0x45.0x57.5
35.0x50.0x57.5
35.0x50.0x57.5
38.0x57.5x57.5
38.0x57.5x57.5
45.0x57.0x57.5
45.0x65.0x57.5
20.3
20.3
20.3
20.3
20.3
20.3
20.3
20.3
B32718H1226+000
B32718H1256K000
B32718H1276+000
B32718H1306+000
B32718H1356+000
B32718H1406+000
B32718H1456+000
B32718H1556+000
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Intermediate capacitance values are available on request.
Composition of ordering code
+ = Capacitance tolerance code:
J = ±5%
K = ±10%
*** = Packing code
000 = untaped (lead length 6 –1 mm)
Other lead lengths available upon request
1) Capacitance value measured at 1 kHz.
2) Max ripple current IRMS at 85 °C, 10 kHz for T ≤15 °C, Capacitor body temperature (ambient temperature +
self-heating) must be observed for maximum voltage rating. Refer to voltage derating rules in page 20.
3) Typical ESL value measured at resonance frequency (see specific graphs of Z versus frequency).
Please read Cautions and warnings and
Important notes at the end of this document.
18
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Ordering codes and packing units (lead spacing 52.5 mm)
CR1) Max. dimensions P1
wxhxl
IRMS,max
70 °C
10 kHz
A
IRMS,max2)
85 °C
10 kHz
A
ESRtyp ESLtyp3)
85 °C
10 kHz
nH
m
tan
max
1 kHz
10-3
tan
Pcs./
max
MOQ
10 kHz
10-3
20.0 30.0x45.0x57.5 20.3 B32718H2206+000
25.0 35.0x50.0x57.5 20.3 B32718H2256+000
27.0 35.0x50.0x57.5 20.3 B32718H2276+000
30.0 38.0x57.5x57.5 20.3 B32718H2306+000
33.0 38.0x57.5x57.5 20.3 B32718H2336+000
35.0 45.0x55.0x57.5 20.3 B32718H2356+000
40.0 45.0x57.0x57.5 20.3 B32718H2406+000
47.0 45.0x65.0x57.5 20.3 B32718H2476+000
VR,85 °C = 1400 V DC, Vop,100 °C = 1120 V DC
16.2
19.3
20.2
22.4
23.7
25.3
27.3
30.5
14.1
16.8
17.6
19.5
20.6
22.0
23.7
26.5
7.3
5.9
5.4
5.0
4.5
4.3
3.8
3.3
14.5
16.0
16.0
18.0
18.5
17.0
18.5
21.5
1.7
1.7
1.7
1.7
1.7
1.8
1.8
1.8
15.6
15.6
15.7
15.8
15.9
16.0
16.2
16.5
280
108
108
96
96
140
140
140
15.0
20.0
25.0
30.0
35.0
15.1
18.7
22.2
25.3
28.3
13.1
16.3
19.3
22.0
24.6
8.4
6.3
5.1
4.4
3.8
14.5
16.0
18.5
18.5
21.0
1.4
1.4
1.4
1.5
1.5
13.5
13.5
13.7
14.0
14.2
280
108
96
140
140
Ordering code
(composition see
below)
mm
mm
µF
VR,85 °C = 1200 V DC, Vop,100 °C = 960 V DC
30.0x45.0x57.5
35.0x50.0x57.5
38.0x57.5x57.5
45.0x57.0x57.5
45.0x65.0x57.5
20.3
20.3
20.3
20.3
20.3
B32718H4156K000
B32718H4206K000
B32718H4256K000
B32718H4306K000
B32718H4356K000
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Intermediate capacitance values are available on request.
Composition of ordering code
+ = Capacitance tolerance code:
J = ±5%
K = ±10%
*** = Packing code
000 = untaped (lead length 6 –1 mm)
Other lead lengths available upon request
1) Capacitance value measured at 1 kHz.
2) Max ripple current IRMS at 85 °C, 10 kHz for T ≤15 °C, Capacitor body temperature (ambient temperature +
self-heating) must be observed for maximum voltage rating. Refer to voltage derating rules in page 20.
3) Typical ESL value measured at resonance frequency (see specific graphs of Z versus frequency).
Please read Cautions and warnings and
Important notes at the end of this document.
19
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Ordering codes and packing units (lead spacing 52.5 mm)
CR1) Max. dimensions P1
wxhxl
IRMS,max
70 °C
10 kHz
A
IRMS,max2)
85 °C
10 kHz
A
ESRtyp ESLtyp3)
85 °C
10 kHz
nH
m
tan
max
1 kHz
10-3
tan
Pcs./
max
MOQ
10 kHz
10-3
10.0 30.0x45.0x57.5 20.3 B32718H7106+000*
15.0 35.0x50.0x57.5 20.3 B32718H7156K000*
18.0 38.0x57.5x57.5 20.3 B32718H7186+000*
20.0 45.0x57.0x57.5 20.3 B32718H7206+000*
25.0 45.0x65.0x57.5 20.3 B32718H7256+000*
VR,85 °C = 1600 V DC, Vop,100 °C = 1280 V DC
13.6
17.4
20.7
22.9
26.7
11.8
15.1
18.0
19.9
23.2
10.4
7.3
5.9
5.4
4.3
14.5
16.5
18.0
18.5
21.0
1.3
1.3
1.3
1.3
1.3
11.1
11.2
11.3
11.5
11.5
280
108
96
140
140
8.0
12.0
15.0
18.0
20.0
12.8
16.4
19.7
22.7
24.7
11.1
14.3
17.1
19.7
21.5
11.6
8.2
6.5
5.5
5.0
14.5
16.5
18.0
18.5
21.5
1.2
1.2
1.2
1.2
1.2
10.1
10.4
10.5
10.6
10.8
280
108
96
140
140
Ordering code
(composition see
below)
mm
µF mm
VR,85 °C = 1500 V DC, Vop,100 °C = 1200 V DC
30.0x45.0x57.5
35.0x50.0x57.5
38.0x57.5x57.5
45.0x57.0x57.5
45.0x65.0x57.5
20.3
20.3
20.3
20.3
20.3
B32718H3805+000*
B32718H3126K000*
B32718H3156K000*
B32718H3186K000*
B32718H3206K000*
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Intermediate capacitance values are available on request.
Composition of ordering code
+ = Capacitance tolerance code:
J = ±5%
K = ±10%
*** = Packing code
000 = untaped (lead length 6 –1 mm)
Other lead lengths available upon request
1) Capacitance value measured at 1 kHz.
2) Max ripple current IRMS at 85 °C, 10 kHz for T ≤15 °C, Capacitor body temperature (ambient temperature +
self-heating) must be observed for maximum voltage rating. Refer to voltage derating rules in page 20.
3) Typical ESL value measured at resonance frequency (see specific graphs of Z versus frequency).
*) This part is affected by “Dual Use” regulations according to the law of the country the production site is located
in. Deliveries of such products are subject to prior approval of the respective local authorities bases on customer declarations. The delivery to certain countries may be restricted.
Please read Cautions and warnings and
Important notes at the end of this document.
20
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Technical data
Reference standard: IEC 61071:2007. All data given at T = 20 °C, unless otherwise specified.
Operating temperature range (case) Max. operating temperature, Top,max
Upper category temperature Tmax
Lower category temperature Tmin
Rated temperature TR
Insulation resistance Rins
> 10 000 s (after 1 min)
given as time constant
= CR Rins, rel. humidity ≤ 65%
(minimum as-delivered values)
+105 °C
+105 °C
–55 °C
+85 °C
∙
DC test voltage between terminals
(10 s)
1.5 ∙ VR
Voltage test terminal to case (10 s)
Pulse Handling Capability (V/µs)
Reliability:
VR (V DC) at 85 °C
2110 V AC, 50 Hz
IP (A) / C (µF)
Failure rate λ 5 fit (≤ 10 ∙ 10–9/h) at 0.5 ∙ VR, 40 °C
For conversion to other operating conditions and temperatures, refer to chapter "Quality, 2 Reliability".
Service life tSL 95 000 h at VR and 70 °C
Continuous operating voltage
Vop (V DC) at 100 °C
Continuous operating voltage (capacitor body temperature between
85 °C and 105 °C)
500 V 600 V 800 V 900 V 1000 V 1100 V 1200 V 1400 V 1500 V 1600 V
400 V 480 V 640 V 720 V 800 V
880 V
960 V
1120 V 1200 V 1280 V
1.33%/°C of Vop derating compared to Vop at 85 °C
Typical waveforms
Please read Cautions and warnings and
Important notes at the end of this document.
21
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Restrictions:
VR: Maximum operating peak voltage of either polarity but of a non-reversing waveform, for which
the capacitor has been designed for continuous operation.
^
u
AC ≤0.2 · VR (VR ≤1200 V DC)
^
u
R 1400 V DC)
AC ≤0.15 · VR (V
Overvoltage
1.1 ∙ VR
1.15 ∙ VR
1.2 ∙ VR
1.3 ∙ VR
Maximum duration within one day
Observation
30% of on-load duration
30 min
5 min
1 min
System regulation
System regulation
System regulation
System regulation
NOTE 1
An overvoltage equal to 1.5 ∙ VR for 30 ms is permitted 1000 times during the life of the
capacitor.
The amplitudes of the overvoltages that may be tolerated without significant reduction in the life time
of the capacitor depend on their duration, the number of application and the capacitor temperature.
In addition these values assume that the overvoltages may appear when the internal temperature
of the capacitor is less than 0 °C but within the temperature category.
NOTE 2
The average applied voltage must not be higher than the specified voltage.
Pulse handling capability
"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal
voltages, expressed in V/μs.
Note:
The values of dV/dt provided below must not be exceeded in order to avoid damaging the capacitor.
dV/dt values (available types)
Lead spacing
Type
500
VR (85 °C)
dV/dt in V/µs 30
Lead spacing
Type
500
VR (85 °C)
dV/dt in V/µs 21
Lead spacing
Type
500
VR (85 °C)
dV/dt in V/µs 14
600
35
600
22
600
14
800
40
800
25
800
15
Please read Cautions and warnings and
Important notes at the end of this document.
900
50
27.5 mm
B32714H
1000 1100
75
85
1200
100
1400
120
1500
140
1600
155
900
35
37.5 mm
B32716H
1000 1100
54
63
1200
73
1400
85
1500
100
1600
110
900
22
52.5 mm
B32718H
1000 1100
35
40
1200
50
1400
58
1500
65
1600
75
22
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Characteristics curves
Additional technical information can be found under "Design support"
on www.tdk-electronics.tdk.com.
Impedance Z versus frequency f
(typical values)
ESR versus frequency f
(typical values)
Lead spacing 27.5 mm
Lead spacing 27.5 mm
500 V DC
500 V DC
Impedance Z versus frequency f
(typical values)
ESR versus frequency f
(typical values)
Lead spacing 27.5 mm
Lead spacing 27.5 mm
600 V DC
600 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
23
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Characteristics curves
Additional technical information can be found under "Design support"
on www.tdk-electronics.tdk.com.
Impedance Z versus frequency f
(typical values)
ESR versus frequency f
(typical values)
Lead spacing 27.5 mm
Lead spacing 27.5 mm
800 V DC
800 V DC
Impedance Z versus frequency f
(typical values)
ESR versus frequency f
(typical values)
Lead spacing 27.5 mm
Lead spacing 27.5 mm
900 V DC
900 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
24
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Characteristics curves
Additional technical information can be found under "Design support"
on www.tdk-electronics.tdk.com.
Impedance Z versus frequency f
(typical values)
ESR versus frequency f
(typical values)
Lead spacing 27.5 mm
Lead spacing 27.5 mm
1000 V DC
1000 V DC
Impedance Z versus frequency f
(typical values)
ESR versus frequency f
(typical values)
Lead spacing 27.5 mm
Lead spacing 27.5 mm
1100 V DC
1100 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
25
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Characteristics curves
Additional technical information can be found under "Design support"
on www.tdk-electronics.tdk.com.
Impedance Z versus frequency f
(typical values)
ESR versus frequency f
(typical values)
Lead spacing 27.5 mm
Lead spacing 27.5 mm
1200 V DC
1200 V DC
Impedance Z versus frequency f
(typical values)
ESR versus frequency f
(typical values)
Lead spacing 27.5 mm
Lead spacing 27.5 mm
1400 V DC
1400 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
26
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Characteristics curves
Additional technical information can be found under "Design support"
on www.tdk-electronics.tdk.com.
Impedance Z versus frequency f
(typical values)
ESR versus frequency f
(typical values)
Lead spacing 27.5 mm
Lead spacing 27.5 mm
1500 V DC
1500 V DC
Impedance Z versus frequency f
(typical values)
ESR versus frequency f
(typical values)
Lead spacing 27.5 mm
Lead spacing 27.5 mm
1600 V DC
1600 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
27
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Characteristics curves
Additional technical information can be found under "Design support"
on www.tdk-electronics.tdk.com.
Impedance Z versus frequency f
(typical values)
ESR versus frequency f
(typical values)
Lead spacing 37.5 mm
Lead spacing 37.5 mm
500 V DC
500 V DC
Impedance Z versus frequency f
(typical values)
ESR versus frequency f
(typical values)
Lead spacing 37.5 mm
Lead spacing 37.5 mm
600 V DC
600 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
28
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Characteristics curves
Additional technical information can be found under "Design support"
on www.tdk-electronics.tdk.com.
Impedance Z versus frequency f
(typical values)
ESR versus frequency f
(typical values)
Lead spacing 37.5 mm
Lead spacing 37.5 mm
800 V DC
800 V DC
Impedance Z versus frequency f
(typical values)
ESR versus frequency f
(typical values)
Lead spacing 37.5 mm
Lead spacing 37.5 mm
900 V DC
900 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
29
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Characteristics curves
Additional technical information can be found under "Design support"
on www.tdk-electronics.tdk.com.
Impedance Z versus frequency f
(typical values)
ESR versus frequency f
(typical values)
Lead spacing 37.5 mm
Lead spacing 37.5 mm
1000 V DC
1000 V DC
Impedance Z versus frequency f
(typical values)
ESR versus frequency f
(typical values)
Lead spacing 37.5 mm
Lead spacing 37.5 mm
1100 V DC
1100 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
30
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Characteristics curves
Additional technical information can be found under "Design support"
on www.tdk-electronics.tdk.com.
Impedance Z versus frequency f
(typical values)
ESR versus frequency f
(typical values)
Lead spacing 37.5 mm
Lead spacing 37.5 mm
1200 V DC
1200 V DC
Impedance Z versus frequency f
(typical values)
ESR versus frequency f
(typical values)
Lead spacing 37.5 mm
Lead spacing 37.5 mm
1400 V DC
1400 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
31
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Characteristics curves
Additional technical information can be found under "Design support"
on www.tdk-electronics.tdk.com.
Impedance Z versus frequency f
(typical values)
ESR versus frequency f
(typical values)
Lead spacing 37.5 mm
Lead spacing 37.5 mm
1500 V DC
1500 V DC
Impedance Z versus frequency f
(typical values)
ESR versus frequency f
(typical values)
Lead spacing 37.5 mm
Lead spacing 37.5 mm
1600 V DC
1600 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
32
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Characteristics curves
Additional technical information can be found under "Design support"
on www.tdk-electronics.tdk.com.
Impedance Z versus frequency f
(typical values)
ESR versus frequency f
(typical values)
Lead spacing 52.5 mm
Lead spacing 52.5 mm
500 V DC
500 V DC
Impedance Z versus frequency f
(typical values)
ESR versus frequency f
(typical values)
Lead spacing 52.5 mm
Lead spacing 52.5 mm
600 V DC
600 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
33
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Characteristics curves
Additional technical information can be found under "Design support"
on www.tdk-electronics.tdk.com.
Impedance Z versus frequency f
(typical values)
ESR versus frequency f
(typical values)
Lead spacing 52.5 mm
Lead spacing 52.5 mm
800 V DC
800 V DC
Impedance Z versus frequency f
(typical values)
ESR versus frequency f
(typical values)
Lead spacing 52.5 mm
Lead spacing 52.5 mm
900 V DC
900 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
34
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Characteristics curves
Additional technical information can be found under "Design support"
on www.tdk-electronics.tdk.com.
Impedance Z versus frequency f
(typical values)
ESR versus frequency f
(typical values)
Lead spacing 52.5 mm
Lead spacing 52.5 mm
1000 V DC
1000 V DC
Impedance Z versus frequency f
(typical values)
ESR versus frequency f
(typical values)
Lead spacing 52.5 mm
Lead spacing 52.5 mm
1100 V DC
1100 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
35
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Characteristics curves
Additional technical information can be found under "Design support"
on www.tdk-electronics.tdk.com.
Impedance Z versus frequency f
(typical values)
ESR versus frequency f
(typical values)
Lead spacing 52.5 mm
Lead spacing 52.5 mm
1200 V DC
1200 V DC
Impedance Z versus frequency f
(typical values)
ESR versus frequency f
(typical values)
Lead spacing 52.5 mm
Lead spacing 52.5 mm
1400 V DC
1400 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
36
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Characteristics curves
Additional technical information can be found under "Design support"
on www.tdk-electronics.tdk.com.
Impedance Z versus frequency f
(typical values)
ESR versus frequency f
(typical values)
Lead spacing 52.5 mm
Lead spacing 52.5 mm
1500 V DC
1500 V DC
Impedance Z versus frequency f
(typical values)
ESR versus frequency f
(typical values)
Lead spacing 52.5 mm
Lead spacing 52.5 mm
1600 V DC
1600 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
37
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Characteristics curves
Permissible current IRMS versus frequency f at 85 °C
Lead spacing 27.5 mm
500 V DC
600 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
38
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Characteristics curves
Permissible current IRMS versus frequency f at 85 °C
Lead spacing 27.5 mm
800V DC
900 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
39
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Characteristics curves
Permissible current IRMS versus frequency f at 85 °C
Lead spacing 27.5 mm
1000 V DC
1100 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
40
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Characteristics curves
Permissible current IRMS versus frequency f at 85 °C
Lead spacing 27.5 mm
1200 V DC
1400 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
41
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Characteristics curves
Permissible current IRMS versus frequency f at 85 °C
Lead spacing 27.5 mm
1500 V DC
1600 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
42
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Characteristics curves
Permissible current IRMS versus frequency f at 85 °C
Lead spacing 37.5 mm
500 V DC
600 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
43
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Characteristics curves
Permissible current IRMS versus frequency f at 85 °C
Lead spacing 37.5 mm
800V DC
900 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
44
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Characteristics curves
Permissible current IRMS versus frequency f at 85 °C
Lead spacing 37.5 mm
1000 V DC
1100 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
45
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Characteristics curves
Permissible current IRMS versus frequency f at 85 °C
Lead spacing 37.5 mm
1200 V DC
1400 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
46
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Characteristics curves
Permissible current IRMS versus frequency f at 85 °C
Lead spacing 37.5 mm
1500 V DC
1600 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
47
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Characteristics curves
Permissible current IRMS versus frequency f at 85 °C
Lead spacing 52.5 mm
500 V DC
600 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
48
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Characteristics curves
Permissible current IRMS versus frequency f at 85 °C
Lead spacing 52.5 mm
800 V DC
900 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
49
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Characteristics curves
Permissible current IRMS versus frequency f at 85 °C
Lead spacing 52.5 mm
1000 V DC
1100 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
50
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Characteristics curves
Permissible current IRMS versus frequency f at 85 °C
Lead spacing 52.5 mm
1200 V DC
1400 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
51
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Characteristics curves
Permissible current IRMS versus frequency f at 85 °C
Lead spacing 52.5 mm
1500 V DC
1600 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
52
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Curves characteristics (IRMS derating versus temperature)
Maximum IRMS current as function of the ambient temperature: IRMS (TA) = Factor x IRMS (85 °C)
Please read Cautions and warnings and
Important notes at the end of this document.
53
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Heat transference for self heating calculation
Box dimensions
Figure 1
w (mm)
9.0
11.0
11.0
12.5
13.5
14.0
15.0
16.0
18.0
18.0
19.0
21.0
22.0
18.0
20.0
24.0
24.0
28.0
24.0
28.0
30.0
33.0
42.5
30.0
35.0
38.0
45.0
45.0
45.0
h (mm)
18.0
19.0
21.0
21.5
23.0
24.5
24.5
30.0
27.5
33.0
30.0
31.0
36.5
32.5
39.5
19.0
15.0
37.0
44.0
42.5
45.0
48.0
60.0
45.0
50.0
57.5
55.0
57.0
65.0
l (mm)
31.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.5
57.5
57.5
57.5
57.5
57.5
57.5
Equivalent heat
coefficient
G (mW/°C)
22
25
28
30
32
35
36
40
44
48
48
51
58
59
72
50
44
83
84
90
100
110
150
125
145
165
180
185
200
The equivalent heat coefficient "G (mW/ºC)" is given for measuring the temperature on the lateral
surface of the plastic box as Figure 1 shows. By using a thermocouple and avoiding effect of radiation and convection the temperature measured during operation conditions should be a result of
the dissipated power divided by the equivalent heat coefficient.
Please read Cautions and warnings and
Important notes at the end of this document.
54
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Self Heating by power dissipation & equivalent heat coefficient
The IRMS and consequently the power dissipation must be limited during operation in order to not
exceed the maximum limit of T allowed for this series. Tmax given for this series is equal or lower
than 15 °C at rated temperature (85 °C), for higher ambient temperatures Tmax (T) will have the
same derating factor than IRMS versus temperature and then an equivalent derating as per:
Tmax (T) = (Factor)2 ×T (85 °C).
For any particular IRMS the T may be calculated by:
T (°C) = Pdis (mW) / G(mW/°C).
Where T (°C) is the difference between the temperature measured on the box (see Figure 1) and
the ambient temperature when capacitor is working during normal operation;
T (°C) = Top (°C) – TA (°C).
It represents the increasing of temperature provoked by the IRMS during operation.
G (mW/°C) is the equivalent heat coefficient described above and Pdis (mW) is the dissipated power
defined by:
Pdis (mW) = ESRtyp (mΩ) × IRMS2 (ARMS).
Example for thermal calculation:
We will take as reference B32718H0306K (30 µF/1000 V) type for thermal calculation.
Considering the following load and capacitor characteristics:
IRMS : 7 ARMS at 10 kHz
G (mW/°C): 125
TA: 95 °C
30 × 45 × 57.5 box
Then we have to find the ESRtyp at 10 kHz what is approx. 6.0 m.
So according to:
we have the following:
and as per:
Pdis (mW) = ESRtyp (m) × IRMS2 (ARMS)
Pdis (mW) = 6.0 mΩ × 7 ARMS2 = 294.0 mW
T (°C) = Pdis (mW) / G (mW/°C)
we have the following:
What is below of the
T (°C) = 294.0 (mW) / 125 (mW/°C) = 2.35 °C
Tmax (95 °C) = (Factor)2 × T (85 °C) = (0.5)2 × 15 °C = 3.8 °C
On the other hand we may confirm that max IRMS at 10 kHz at 85 °C = 15.2 ARMS
And then max IRMS for 95 °C of ambient temperature is defined as follows:
IRMS (95 °C) = Factor × IRMS (85 °C) = 0.5 × 15.2 ARMS = 7.6 ARMS.
What confirms once again that IRMS (7 ARMS at 10 kHz) is below the max specified for such frequency and ambient temperature.
Please read Cautions and warnings and
Important notes at the end of this document.
55
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Service life:
Life time expectancy – typical curves
(500 V DC / 600 V DC / 800 V DC / 900 V DC / 1000 V DC / 1100 V DC / 1200 V DC /
1400 V DC / 1500 V DC / 1600 V DC / B3271x-H/5/6/8/9/0/1/2/4/7/3)
Note: Confidence level of 98%.
Please read Cautions and warnings and
Important notes at the end of this document.
56
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Testing and Standards
Test
Reference
Electrical
parameters
(Routine
test)
IEC61071:2007
Conditions of test
Voltage between terminals,
1.5 VR, during 10 s
Insulation resistance,
RINS at 500 V,
Capacitance, C at 1 kHz
(room temperature)
Dissipation factor, tan at
1/10 kHz (room temperature)
Robustness IEC 60068-2-21-2006 Tensile strength (test Ua1)
of terminaWire diameter
Tensile force
tions
0.5 < d1 ≤ 0.8 mm 10 N
0.8 < d1 ≤ 1.25 mm 20 N
(Type test)
Resistance IEC 60068-2-20:2008, Solder bath temperature at
to soldering test Tb,
260 ±5 °C, immersion for
heat
method 1A
10 seconds
(Type test)
Rapid
IEC 61071:2007
change of
temperature
(Type test)
Vibration
and shocks
(Type test)
IEC 61071:2007
Performance
requirements
Within specified limits
Capacitance and tan
within specified limits
C/C0 ≤ 2%
| tan | ≤ 0.002
RINS ≥ 50% of initial limit
Mechanical:
No visible damage
TA = lower category temperature C/C0| ≤ 2%
TB = upper category temperature | tan | ≤ 0.002
Five cycles, duration t = 30 min
RINS ≥ 50% of initial limit
Mechanical:
No visible damage
In accordance with
Electrical:
C/C0| ≤ 0.5% at 1 kHz
IEC 60068-2-6
f = 10 Hz to 55 Hz
Mechanical:
a = 0.35 mm
No visible damage
Test duration per
axis = 10 frequency cycles
(3 axes offset from each other by
90°), 1 octave/min.
Mounting conditions:
The capacitor shall be fixed by the
leads and the body must be properly clamped.
Please read Cautions and warnings and
Important notes at the end of this document.
57
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
Test
Reference
Self-healing IEC 61071:2007
Climatic
sequence
(Type test)
IEC 60384-16:2005
Blased
humidity test
(Type test)
Endurance
(Type test)
IEC 61071:2007
B32714H ... B32718H
Conditions of test
Performance
requirements
1.5 x UNDC
C/C0| ≤ 0.5%
Duration 10 s
tan (10 kHz) ≤ 1.2
Number of clearings ≤ 5
initial tan + 0.0001
Clearing = voltage drop of 5%
increase the voltage at 100 V/s till
5 clearings occur
with a max. of 2.5 VR
for a duration of 10 s
No visible damage
Dry heat Tb / 16 h
C/C0| ≤ 3%
Damp heat cyclic, 1st cycle
+55 °C / 24 h / 95% ... 100% RH | tan | ≤ 0.001
Cold Ta / 2 h
RINS ≥ 50% of initial limit
Damp heat cyclic, 5 cycles
+55 °C / 24 h / 95% ... 100% RH
No visible damage
60 °C / 95% RH / VR 1000 h
C/C0| ≤ 3%
| tan | ≤ 0.005 (1 kHz)
RINS ≥ 50% of initial limit
No visible damage
+85 °C / 1.3 VR / 500 hours
C/C0| ≤ 3%
and 1000 discharges at 1.4 IP
and +85 °C / 1.3 VR / 500 hours
| tan | ≤ 0.005 (1 kHz)
RINS ≥ 50% of initial limit
Mechanical:
No visible damage
Please read Cautions and warnings and
Important notes at the end of this document.
58
7/22
Film Capacitor
Metallized polypropylene Film Capacitor
B32714H ... B32718H
Mounting guidelines
1
Soldering
1.1
Solderability of leads
The solderability of terminal leads is tested to IEC 60068-2-20:2008, test Ta, method 1.
Before a solderability test is carried out, terminals are subjected to accelerated ageing (to
IEC 60068-2-2:2007, test Ba: 4 h exposure to dry heat at 155 C). Since the ageing temperature
is far higher than the upper category temperature of the capacitors, the terminal wires should be
cut off from the capacitor before the ageing procedure to prevent the solderability being impaired
by the products of any capacitor decomposition that might occur.
Solder bath temperature
Soldering time
Immersion depth
Evaluation criteria:
235 ±5 °C
2.0 ±0.5 s
2.0 +0/–0.5 mm from capacitor body or seating plane
Visual inspection
Wetting of wire surface by new solder 90%, free-flowing solder
1.2
Resistance to soldering heat
Resistance to soldering heat is tested to IEC 60068-2-20:2008, test Tb, method 1. Conditions:
Series
Solder bath temperature
MKT boxed (except 2.5 × 6.5 ×7.2 mm) 260 5 C
coated
uncoated (lead spacing >10 mm)
MFP
MKP (lead spacing >7.5 mm)
MKT boxed (case 2.5 ×6.5 ×7.2 mm)
MKP (lead spacing 7.5 mm)
MKT uncoated (lead spacing 10 mm)
insulated (B32559)
Please read Cautions and warnings and
Important notes at the end of this document.
59
7/22
Soldering time
10 1 s
5 1 s
