B41692A8228Q001

Aluminum electrolytic capacitors Axial-lead and soldering star capacitors Series/Type: B41692, B41792 Date: January 2021 © TDK Electronics AG 2021. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without TDK Electronics' prior express consent is prohibited. Axial-lead and soldering star capacitors B41692, B41792 Compact  up to 140 °C Applications Automotive electronics Features High vibration stability, special design with high vibration stability up to 60 g available upon request Long useful life, 2000 h at up to 140 °C High ripple current capability Compact design SIKOREL design  storage for up to 15 years at a temperature of up to 35 °C RoHS-compatible Construction Charge/discharge-proof, polar Aluminum case with PET insulating sleeve Negative pole connected to case Version without insulating sleeve available upon request Terminals Axial leads, welded to capacitor case and cover disc Soldering star option for upright mounting on PCB or welding to busbar Alternative axial-lead design with double-sided plates for horizontal mounting available upon request Taping and packing Axial-lead capacitors will be delivered in pallet package Capacitors with d × l ≤ 16 × 39 mm are also available taped on reel Soldering star capacitors are packed in blister trays Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 19 B41692, B41792 Compact  up to 140 °C Specifications and characteristics in brief Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance 25 ... 75 V DC 1.15  VR 360 ... 10000 μF 10/+30%  Q Leakage current Ileak (5 min, 20 °C) Self-inductance ESL1) Diameter d (mm) Terminals 12 14 16 18 20 21 30  34 36 38  8 10 10.5 11   38            39 41 45 50  11 12 13 14 Length l (mm) Approx. ESL (nH) axial Useful life2) 140 °C; VR; 0.6  IAC,R 125 °C; VR; IAC, max 125 °C; VR; IAC, R 25 29 30 35 39 49 soldering star 25 30 35 39 49 Requirements: > 2000 h ΔC/C > 3000 h ESR > 5000 h Ileak Voltage endurance test 125 °C; VR 2000 h   21     6    22  24    6 7    26  29 31 33  7 8 9 9  ≤ 30% of initial value ≤ 3 times initial specified limit3) ≤ initial specified limit Post test requirements: ΔC/C ≤ 10% of initial value ESR ≤ 1.3 times initial specified limit3) Ileak ≤ initial specified limit Vibration resistance test To IEC 60068-2-6, test Fc: Frequency range 10 Hz ... 2 kHz, displacement amplitude max. 1.5 mm, acceleration max. 20 g, duration 3 × 2 h. Capacitor rigidly clamped by the aluminum case e.g. using our standard fixture. IEC climatic category To IEC 60068-1: 55/125/56 (55 °C/+125 °C/56 days damp heat test) Sectional specification IEC 60384-4 Reference standard AEC-Q2004) 1) 2) 3) 4) If optimum circuit design is used, the values are lower by 30%. Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life. ESRmax at 100 Hz, 20 °C Refer to chapter "General technical information, 2.3 AEC-Q200 standard" for further details. Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 19 B41692, B41792 Compact  up to 140 °C B41692, Axial-lead capacitors Dimensional drawing Dimensions, weights and packing units d×l mm 12 × 30 14 × 25 14 × 30 16 × 25 16 × 30 16 × 35 16 × 39 18 × 25 18 × 30 18 × 35 18 × 39 20 × 29 21 × 30 21 × 35 21 × 39 21 × 49 dmax × Imax mm 12.5 × 30.5 14.5 × 25.5 14.5 × 30.5 16.5 × 25.5 16.5 × 30.5 16.5 × 35.5 16.5 × 40 18.5 × 25.5 18.5 × 30.5 18.5 × 35.5 18.5 × 40 20.5 × 29.5 21.5 × 30.5 21.5 × 35.5 21.5 × 40 21.5 × 50 Please read Cautions and warnings and Important notes at the end of this document. Approx. weight g 5.1 5.7 6.8 7.4 8.9 10.4 11.7 9.3 11.1 12.8 14.7 13.5 16.5 17.0 20.0 25.0 Page 4 of 19 Packing units (pcs.) Pallet Reel 288 450 200 350 200 350 180 250 180 250 180 250 180 250 160  160  160  160  140  140  140  140  110  B41692, B41792 Compact  up to 140 °C B41792, Soldering star capacitors Dimensional drawings Mounting holes d = 12 mm ... 14 mm Mounting holes d = 16 mm ... 21 mm Dimensions, weights and packing units d×l mm 12 × 30 14 × 25 14 × 30 16 × 25 16 × 30 16 × 35 16 × 39 18 × 25 18 × 30 18 × 35 18 × 39 21 × 30 21 × 35 21 × 39 21 × 49 dmax × Imax mm 13.5 × 32 15.5 × 27 15.5 × 32 17.5 × 27 17.5 × 32 17.5 × 37 17.5 × 41.5 19.5 × 27 19.5 × 32 19.5 × 37 19.5 × 41.5 22.5 × 32.0 22.5 × 37.0 22.5 × 41.5 22.5 × 51.5 Please read Cautions and warnings and Important notes at the end of this document. c ±0.1 mm 12.5 14.5 14.5 16.5 16.5 16.5 16.5 18.5 18.5 18.5 18.5 21.5 21.5 21.5 21.5 e ±0.1 mm 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.5 3.5 3.5 3.5 Page 5 of 19 Approx. weight g 5.4 6.1 7.2 7.9 9.4 10.9 12.2 9.9 11.8 13.2 15.4 17.1 18.3 21.0 26.0 Packing units pcs. 480 480 480 300 300 200 200 300 300 200 200 468 324 324 264 B41692, B41792 Compact  up to 140 °C Overview of available types VR (V DC) 25 40 63 75 Case dimensions d × l (mm) CR (μF) 360 12 × 30 430 14 × 25 14 × 30 560 12 × 30 620 16 × 25 18 × 25 680 750 18 × 25 820 16 × 30 18 × 30 910 14 × 30 1000 1100 16 × 35 18 × 30 12 × 30 18 × 35 1200 1300 14 × 25 16 × 30 1400 2000 2400 18 × 25 2500 16 × 30 21 × 30 18 × 35 18 × 39 21 × 30 18 × 39 21 × 35 16 × 35 18 × 30 21 × 35 21 × 39 16 × 39 21 × 39 1500 1800 16 × 39 20 × 29 21 × 49 18 × 39 2600 21 × 49 2700 3300 18 × 30 3600 16 × 39 21 × 39 3900 4300 20 × 29 4700 18 × 39 21 × 49 5100 7200 21 × 39 10000 21 × 49 Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 19 B41692, B41792 Compact  up to 140 °C Case dimensions and ordering codes CR 100 Hz 20 °C μF Case dimensions d×l mm VR = 25 V DC 12 × 30 1100 1300 14 × 25 2400 18 × 25 2500 16 × 30 3300 18 × 30 3600 16 × 39 4300 20 × 29 4700 18 × 39 7200 21 × 39 10000 21 × 49 VR = 40 V DC 12 × 30 620 1000 14 × 30 1400 16 × 30 1800 16 × 35 1800 18 × 30 2000 16 × 39 2400 20 × 29 2600 18 × 39 3900 21 × 39 5100 21 × 49 VR = 63 V DC 12 × 30 360 14 × 25 430 560 14 × 30 620 16 × 25 750 18 × 25 820 16 × 30 1000 16 × 35 1000 18 × 30 1200 16 × 39 1300 18 × 35 1400 21 × 30 1500 18 × 39 1800 21 × 35 2000 21 × 39 21 × 49 2700 Ordering code Axial pallet Ordering code Axial reel Ordering code Soldering star B41692C5118Q001 B41692C5138Q001 B41692C5248Q001 B41692C5258Q001 B41692C5338Q001 B41692C5368Q001 B41692C5438Q001 B41692C5478Q001 B41692C5728Q001 B41692C5109Q001 B41692C5118Q003 B41692C5138Q003 B41792C5118Q001 B41792C5138Q001 B41792C5248Q001 B41792C5258Q001 B41792C5338Q001 B41792C5368Q001 B41692C7627Q001 B41692C7108Q001 B41692C7148Q001 B41692C7188Q001 B41692D7188Q001 B41692C7208Q001 B41692C7248Q001 B41692C7268Q001 B41692C7398Q001 B41692C7518Q001 B41692C7627Q003 B41692C7108Q003 B41692C7148Q003 B41692C7188Q003 B41692D8367Q001 B41692D8437Q001 B41692D8567Q001 B41692D8627Q001 B41692D8757Q001 B41692D8827Q001 B41692D8108Q001 B41692E8108Q001 B41692D8128Q001 B41692D8138Q001 B41692D8148Q001 B41692D8158Q001 B41692D8188Q001 B41692D8208Q001 B41692D8278Q001 B41692D8367Q003 B41692D8437Q003 B41692D8567Q003 B41692D8627Q003 Please read Cautions and warnings and Important notes at the end of this document. B41692C5258Q003 B41692C5368Q003 B41792C5478Q001 B41792C5728Q001 B41792C5109Q001 B41692C7208Q003 B41792C7627Q001 B41792C7108Q001 B41792C7148Q001 B41792C7188Q001 B41792D7188Q001 B41792C7208Q001 B41792C7268Q001 B41792C7398Q001 B41792C7518Q001 B41692D8827Q003 B41692D8108Q003 B41692D8128Q003 Page 7 of 19 B41792D8367Q001 B41792D8437Q001 B41792D8567Q001 B41792D8627Q001 B41792D8757Q001 B41792D8108Q001 B41792E8108Q001 B41792D8128Q001 B41792D8138Q001 B41792D8148Q001 B41792D8158Q001 B41792D8188Q001 B41792D8208Q001 B41792D8278Q001 B41692, B41792 Compact  up to 140 °C Case dimensions and ordering codes CR 100 Hz 20 °C μF Case dimensions d×l mm VR = 75 V DC 18 × 25 680 910 18 × 30 1100 18 × 35 1200 21 × 30 1300 18 × 39 1500 21 × 35 1800 21 × 39 2500 21 × 49 Ordering code Axial pallet Ordering code Axial reel B41692D0687Q001 B41692D0917Q001 B41692D0118Q001 B41692D0128Q001 B41692D0138Q001 B41692D0158Q001 B41692D0188Q001 B41692D0258Q001 Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 19 Ordering code Soldering star B41792D0687Q001 B41792D0917Q001 B41792D0118Q001 B41792D0128Q001 B41792D0138Q001 B41792D0158Q001 B41792D0188Q001 B41792D0258Q001 B41692, B41792 Compact  up to 140 °C Technical data CR 100 Hz 20 °C μF Case dimensions d×l mm VR = 25 V DC 12 × 30 1100 1300 14 × 25 2400 18 × 25 2500 16 × 30 3300 18 × 30 3600 16 × 39 4300 20 × 29 4700 18 × 39 7200 21 × 39 10000 21 × 49 VR = 40 V DC 12 × 30 620 1000 14 × 30 1400 16 × 30 1800 16 × 35 1800 18 × 30 2000 16 × 39 2400 20 × 29 18 × 39 2600 3900 21 × 39 5100 21 × 49 VR = 63 V DC 12 × 30 360 14 × 25 430 560 14 × 30 620 16 × 25 750 18 × 25 820 16 × 30 16 × 35 1000 1000 18 × 30 1200 16 × 39 1300 18 × 35 1400 21 × 30 1500 18 × 39 1800 21 × 35 2000 21 × 39 21 × 49 2700 ESRmax 100 Hz 20 °C mΩ ESRmax 100 Hz 40 °C mΩ ESRmax 10 kHz 20 °C mΩ Zmax 100 kHz 20 °C mΩ IAC,max 10 kHz 105 °C A IAC,max 10 kHz 125 °C A IAC,R 10 kHz 125 °C A IAC,max 10 kHz 140 °C A 163 145 78 84 58 59 47 41 30 23 1230 1040 570 550 410 380 320 290 190 140 114 103 55 61 41 43 34 29 22 17 110 100 54 59 40 42 33 29 22 16 4.6 4.5 7.0 6.2 8.7 8.3 9.4 11.7 13.2 16.7 3.4 3.3 5.2 4.6 6.5 6.2 7.0 8.7 9.8 12.4 2.3 2.3 3.6 3.2 4.5 4.3 4.8 6.0 6.8 8.6 1.5 1.5 2.3 2.1 2.9 2.8 3.1 3.9 4.4 5.6 189 124 96 76 68 68 54 48 35 27 1200 750 540 420 420 380 320 290 200 150 110 75 60 48 41 43 34 29 22 17 107 72 58 46 40 41 33 28 22 17 4.6 5.6 6.2 7.4 8.7 8.3 9.4 11.7 13.2 16.7 3.4 4.2 4.6 5.5 6.5 6.2 7.0 8.7 9.8 12.4 2.4 2.9 3.2 3.8 4.5 4.3 4.8 6.0 6.8 8.6 1.5 1.9 2.1 2.5 2.9 2.8 3.1 3.9 4.4 5.6 243 212 163 158 120 120 98 91 83 71 68 61 54 48 36 1500 1260 965 878 720 665 545 540 455 416 388 361 302 272 202 115 104 80 82 58 63 51 44 43 35 35 30 28 25 19 111 101 78 80 57 61 50 43 42 34 34 29 27 24 18 4.5 4.4 5.5 4.8 6.8 6.0 7.2 8.5 8.2 10.1 9.6 11.5 11.4 12.9 16.3 3.4 3.2 4.0 3.6 5.0 4.5 5.4 6.3 6.1 7.6 7.1 8.6 8.5 9.6 12.2 2.3 2.2 2.8 2.5 3.5 3.1 3.7 4.3 4.2 5.2 4.9 5.9 5.9 6.6 8.4 1.5 1.5 1.8 1.6 2.3 2.0 2.4 2.8 2.7 3.4 3.2 3.8 3.8 4.3 5.5 Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 19 B41692, B41792 Compact  up to 140 °C Technical data CR 100 Hz 20 °C μF Case dimensions d×l mm VR = 75 V DC 18 × 25 680 910 18 × 30 1100 18 × 35 1200 21 × 30 1300 18 × 39 1500 21 × 35 1800 21 × 39 2500 21 × 49 ESRmax 100 Hz 20 °C mΩ 133 100 83 77 70 62 52 38 Please read Cautions and warnings and Important notes at the end of this document. ESRmax 100 Hz 40 °C mΩ 971 726 600 551 508 441 368 265 ESRmax 10 kHz 20 °C mΩ 65 49 40 38 34 31 26 19 Zmax 100 kHz 20 °C mΩ 63 47 39 37 33 30 25 19 Page 10 of 19 IAC,max 10 kHz 105 °C A IAC,max 10 kHz 125 °C A IAC,R 10 kHz 125 °C A IAC,max 10 kHz 140 °C A 6.2 8.0 10.1 9.6 11.5 11.5 12.9 16.4 4.6 6.0 7.6 7.1 8.6 8.6 9.6 12.2 3.1 4.1 5.2 4.9 5.9 5.9 6.6 8.4 1.9 2.5 3.1 2.9 3.5 3.5 4.0 5.0 B41692, B41792 Compact  up to 140 °C Useful life1) depending on ambient temperature TA under ripple current operating conditions at VR Useful life1) depending on case temperature TC under ripple current operating conditions at VR 1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life. Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 19 B41692, B41792 Compact  up to 140 °C Frequency factor of permissible ripple current IAC versus frequency f Frequency characteristics of ESR Typical behavior Equivalent series resistance ESR versus frequency f Typical behavior for 2400 μF/25 V Impedance Z versus frequency f Typical behavior for 2400 μF/25 V Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 19 B41692, B41792 Compact  up to 140 °C Cautions and warnings Personal safety The electrolytes used have been optimized both with a view to the intended application and with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide (DMAC). Furthermore, some of the high-voltage electrolytes used are self-extinguishing. As far as possible, we do not use any dangerous chemicals or compounds to produce operating electrolytes, although in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no alternative materials are currently known. We do, however, restrict the amount of dangerous materials used in our products to an absolute minimum. Materials and chemicals used in our aluminum electrolytic capacitors are continuously adapted in compliance with the TDK Electronics Corporate Environmental Policy and the latest EU regulations and guidelines such as RoHS, REACH/SVHC, GADSL, and ELV. MDS (Material Data Sheets) are available on our website for all types listed in the data book. MDS for customer specific capacitors are available upon request. MSDS (Material Safety Data Sheets) are available for our electrolytes upon request. Nevertheless, the following rules should be observed when handling aluminum electrolytic capacitors: No electrolyte should come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected areas immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid inhaling electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water. Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 19 B41692, B41792 Compact  up to 140 °C Product safety The table below summarizes the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of seperate file chapter "General technical information". Topic Polarity Reverse voltage Mounting position of screwterminal capacitors Robustness of terminals Mounting of single-ended capacitors Soldering Soldering, cleaning agents Upper category temperature Passive flammability Safety information Reference chapter "General technical information" Make sure that polar capacitors are connected 1 with the right polarity. "Basic construction of aluminum electrolytic capacitors" Voltages of opposite polarity should be prevented 3.1.6 by connecting a diode. "Reverse voltage" Screw terminal capacitors must not be mounted 11.1. with terminals facing down unless otherwise "Mounting positions of specified. capacitors with screw terminals" The following maximum tightening torques must 11.3 not be exceeded when connecting screw "Mounting torques" terminals: M5: 2.5 Nm M6: 4.0 Nm The internal structure of single-ended capacitors 11.4 might be damaged if excessive force is applied to "Mounting the lead wires. considerations for Avoid any compressive, tensile or flexural stress. single-ended capacitors" Do not move the capacitor after soldering to PC board. Do not pick up the PC board by the soldered capacitor. Do not insert the capacitor on the PC board with a hole space different to the lead space specified. Do not exceed the specified time or temperature 11.5 limits during soldering. "Soldering" Do not allow halogenated hydrocarbons to come 11.6 into contact with aluminum electrolytic capacitors. "Cleaning agents" Do not exceed the upper category temperature. 7.2 "Maximum permissible operating temperature" Avoid external energy, e.g. fire. 8.1 "Passive flammability" Please read Cautions and warnings and Important notes at the end of this document. Page 14 of 19 B41692, B41792 Compact  up to 140 °C Topic Safety information Active flammability Maintenance Avoid overload of the capacitors. Storage Make periodic inspections of the capacitors. Before the inspection, make sure that the power supply is turned off and carefully discharge the capacitors. Do not apply excessive mechanical stress to the capacitor terminals when mounting. Do not store capacitors at high temperatures or high humidity. Capacitors should be stored at +5 to +35 °C and a relative humidity of ≤ 75%. Breakdown strength Do not damage the insulating sleeve, especially of insulating when ring clips are used for mounting. sleeves Reference chapter "General technical information" 8.2 "Active flammability" 10 "Maintenance" 7.3 "Shelf life and storage conditions" Reference chapter "Capacitors with screw terminals" "Screw terminals  accessories" Display of ordering codes for TDK Electronics products The ordering code for one and the same product can be represented differently in data sheets, data books, other publications, on the company website, or in order-related documents such as shipping notes, order confirmations and product labels. The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products. Detailed information can be found on the Internet under www.tdk-electronics.tdk.com/orderingcodes. Please read Cautions and warnings and Important notes at the end of this document. Page 15 of 19 B41692, B41792 Compact  up to 140 °C Symbols and terms Symbol English German C CR CS CS,T Cf d dmax ESL ESR ESRf Capacitance Rated capacitance Series capacitance Series capacitance at temperature T Capacitance at frequency f Case diameter, nominal dimension Maximum case diameter Self-inductance Equivalent series resistance Equivalent series resistance at frequency f Equivalent series resistance at temperature T Frequency Current Alternating current (ripple current) Root-mean-square value of alternating current Ripple current at frequency f Maximum permissible ripple current Rated ripple current Leakage current Operating leakage current Case length, nominal dimension Maximum case length (without terminals and mounting stud) Resistance Insulation resistance Balancing resistance Temperature Temperature difference Ambient temperature Case temperature Capacitor base temperature Time Period Service life (operating hours) Kapazität Nennkapazität Serienkapazität Serienkapazität bei Temperatur T Kapazität bei Frequenz f Gehäusedurchmesser, Nennmaß Maximaler Gehäusedurchmesser Eigeninduktivität Ersatzserienwiderstand Ersatzserienwiderstand bei Frequenz f ESRT f I IAC IAC,RMS IAC,f IAC,max IAC,R Ileak Ileak,op l lmax R Rins Rsymm T ΔT TA TC TB t Δt tb Please read Cautions and warnings and Important notes at the end of this document. Ersatzserienwiderstand bei Temperatur T Frequenz Strom Wechselstrom Wechselstrom, Effektivwert Wechselstrom bei Frequenz f Maximal zulässiger Wechselstrom Nennwechselstrom Reststrom Betriebsreststrom Gehäuselänge, Nennmaß Maximale Gehäuselänge (ohne Anschlüsse und Gewindebolzen) Widerstand Isolationswiderstand Symmetrierwiderstand Temperatur Temperaturdifferenz Umgebungstemperatur Gehäusetemperatur Temperatur des Gehäusebodens Zeit Zeitraum Brauchbarkeitsdauer (Betriebszeit) Page 16 of 19 B41692, B41792 Compact  up to 140 °C Symbol V VF Vop VR VS XC XL Z ZT tan δ λ ε0 εr ω English Voltage Forming voltage Operating voltage Rated voltage, DC voltage Surge voltage Capacitive reactance Inductive reactance Impedance Impedance at temperature T Dissipation factor Failure rate Absolute permittivity Relative permittivity Angular velocity; 2  π  f German Spannung Formierspannung Betriebsspannung Nennspannung, Gleichspannung Spitzenspannung Kapazitiver Blindwiderstand Induktiver Blindwiderstand Scheinwiderstand Scheinwiderstand bei Temperatur T Verlustfaktor Ausfallrate Elektrische Feldkonstante Dielektrizitätszahl Kreisfrequenz; 2  π  f Note All dimensions are given in mm. Please read Cautions and warnings and Important notes at the end of this document. Page 17 of 19 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, we are either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether a product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.tdk-electronics.tdk.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to our General Terms and Conditions of Supply. Page 18 of 19 Important notes 7. Our manufacturing sites serving the automotive business apply the IATF 16949 standard. The IATF certifications confirm our compliance with requirements regarding the quality management system in the automotive industry. Referring to customer requirements and customer specific requirements (“CSR”) TDK always has and will continue to have the policy of respecting individual agreements. Even if IATF 16949 may appear to support the acceptance of unilateral requirements, we hereby like to emphasize that only requirements mutually agreed upon can and will be implemented in our Quality Management System. For clarification purposes we like to point out that obligations from IATF 16949 shall only become legally binding if individually agreed upon. 8. The trade names EPCOS, CarXield, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CTVS, DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, ModCap, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PowerHap, PQSine, PQvar, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, ThermoFuse, WindCap, XieldCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.tdk-electronics.tdk.com/trademarks. Release 2020-06 Page 19 of 19