B43320C9568M000

Aluminum Electrolytic Capacitors Capacitors with screw terminals Series/Type: B43320, B43340 Date: April 1, 2014  EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. Capacitors with screw terminals 螺钉式电容器 Long life industrial - 85ºC 长寿命工业型 - 85ºC Long life grade capacitors 长寿命级电容器 Applications 应用 ■ Uninterruptiple power supplies ■ 不间断电源 ■ Frequency converters ■ 变频器 ■ Solar and wind power generator ■ 太阳能和风力发电设备 ■ Switch mode power supplies in industrial and medical electronics ■ 工业和医疗电子产品中的开关电源 Features 特点 ■ All-welded constructions ensure reliable elecrical contact ■ 全焊结构，确保可靠的电气接触性 ■ High reliability and high ripple current capability ■ 高可靠性与高耐纹波电流能力 ■ RoHS-compatible ■ 符合RoHS要求 Construction 结构 ■ Charge/discharge-proof, polar ■ 耐充放电，有极性 ■ Aluminum case with insulating sleeve ■ 铝质外壳，带绝缘套管 ■ Poles with screw terminal connections ■ 螺钉连接电极 ■ Mounting with ring clips, clamps or threaded stud ■ 采用卡夹/卡环或底部螺栓安装 Page 2 of 9 B43320,B43340 B43320,B43340 Capacitors with screw terminals 螺钉式电容器 Long life industrial - 85ºC 长寿命工业型 - 85ºC Specifications and characteristics in brief 规格性能参数一览表 Rated voltage VR 350…450 V DC 额定电压VR Surge voltage VS 1.10 ∙ VR 浪涌电压VS -40 ºC…+85 ºC Operating temperature range 工作温度范围 Rated capacitance CR 1000…18000 µF 额定电容量CR (20 ºC,120 Hz) Capacitance tolerance ±20% M 电容量公差 Dissipation factor(max.) 0.2 损耗正切角(最大值) 20ºC,120Hz. Leakage current Ileak Ileak ≤ 0.008 ∙ ( ∙ ) or 5 mA whichever is smaller (20 ºC,after 5 minutes) 漏电流 Ileak (5 mA或取更小值) (20 ºC,5分钟后) Low temperature stability VR( V DC) 350 400 450 低温稳定性 Z (-40 ºC) (max impedance ratio) 22 20 16 Z (+20 ºC) (最大阻抗比率) Useful life 5000 h Requirements 要求: 使用寿命 ≤ ±15% of initial value 初始值的±15% △C/C (85 ºC,VR,IAC,R) ≤ 1.75 times initial specified limit 1.75倍初始规定值 tanδ Ileak ≤ initial specified limit 初始规定值 Shelf life After storage for 1000 h at 85 ºC, the capacitors shall meet the requirement of useful life test after reforming process. After test: VR to be applied for 30 minutes, 储存寿命 24 to 48 hours before measurement. 85ºC高温贮存1000小时，并预处理后，电容器必须符合使用寿命测试中对其电性 能的要求。预处理方法：先加额定电压充电30分钟，恢复24至48小时后再测试。 Frequency multiplier for rated ripple current 额定纹波电流频率系数 50 Hz 120 Hz 300 Hz 1 kHz 0.68 1.00 1.22 1.36 Temperature multiplier for rated ripple current 额定纹波电流温度系数 +40 ºC +55 ºC +70 ºC +85 ºC 1.92 1.75 1.46 1.00 Sectional specification 分规范 IEC 60384-4 Page 3 of 9 10 kHz or more 1.40 B43320,B43340 Capacitors with screw terminals 螺钉式电容器 Long life industrial - 85ºC 长寿命工业型 - 85ºC Ripple current capability 耐纹波电流能力 Due to the ripple current capability of the contact elements, the following current upper limits must not be exceed: 因为接触元件的耐纹波电流能力限制，工作电流不得超过下表的极限值 Capacitor diameter 电容器直径 IAC,max Dimensional drawings 尺寸图 51.6mm 64.3mm 76.9mm 91.0mm 34A 45A 57A 80A B43320 B43340 Ring clip/clamp mounting 卡环或卡夹安装 Threaded stud mounting 底部螺栓安装 M5: Min. reach of screw = 8 mm M5: 螺纹最小深度 = 8 mm M6: Min. reach of screw = 10 mm M6: 螺纹最小深度 = 10 mm Positive pole marking: + 正极标志: + The base of types with threaded stud is fully insulated. 带底部螺栓型号底部完全绝缘。 The can is insulated with two sleeve layers. 铝壳以双层套管绝缘。 Dimensions and weights 尺寸与重量 Terminal Dimensions (mm) with insulating sleeve 端子 带绝缘套管的尺寸(mm) d M5 51.6 +0/-0.8 M5 64.3 +0/-0.8 M6 76.9 +0/-0.7 M6 91.0 +0/-2 l +3/ -0 l1 +3/ -0 75 96 130 96 115 130 155 195 115 130 155 157 196 236 81 102 136 101.2 120.2 135.2 160.2 200.2 120.2 135.2 160.2 161.8 200.8 240.8 l2 +0/ -1 d1 d2 max. 17 M12 11.4 17 M12 13.2 17 M12 17.7 17 M12 17.7 Page 4 of 9 Approx. weight (g) a +0.2/-0.4 约计重量(克) 230 22.2 290 360 415 505 28.5 555 655 865 640 790 31.7 1010 1430 31.7 1630 2230 B43320,B43340 Capacitors with screw terminals 螺钉式电容器 Long life industrial - 85ºC 长寿命工业型 - 85ºC Packing 包装 Capacitor diameter 电容器直径 51.6mm 64.3mm Packing units (pcs.) 包装单位 (件) 22 15 Capacitor diameter 电容器直径 76.9mm 91.0mm Packing units (pcs.) 包装单位 (件) 12 8 For ecological reasons the packing is pure cardboard. 为保护生态环境，包装仅使用纸板. Accessories 附件 The following items are included in the delivery package, but are not fastened to the capacitors: 以下物品已包含在交货包装中, 但没有固定到电容器上: For terminals 用于端子 Thread 螺纹 M5 M6 For mounting1) 用于安装1） M12 Toothed washersScrews/nuts 螺钉或螺帽 带齿垫圈 Outer hex-cross screw with spring and plain washer M5 × 10 外六角十字型螺钉及弹垫垫圈和平垫 圈 M5 × 10 Outer hex-cross screw with spring and plain washer M6 × 12 外六角十字型螺钉及弹垫垫圈和平垫 圈 M6 × 12 J 12.5 DIN 6797 Hex nut BM 12 DIN 439 六角螺母 BM 12 DIN 439 Maximum torque 最大扭矩 2.5 Nm 4.0 Nm 10 Nm The following items must be ordered separately. For details, refer to chapter "Screw terminals − accessories". 以下物品需要另外购买。详情参阅章节“螺钉式电容器－附件”。 Item 物品 Ring clips 卡环 Clamps for capacitors with d ≥ 64.3 mm 电容器用卡夹, d ≥ 64.3 mm Insulating parts 绝缘部件 1) Type 型号 B44030 B44030 B44020 with different mounting method, this item is not always required. it will be delivered upon customer request accordingly. 由于安装方式不同， 该配件不一定都适用。仅当客户提出需求时，EPCOS将配送该部件。 Page 5 of 9 B43320,B43340 Capacitors with screw terminals 螺钉式电容器 Long life industrial - 85ºC 长寿命工业型 - 85ºC Technical dates and ordering codes VR ESRtyp CR Case dimensions 120 Hz 120Hz d×l 20 °C 20 ºC mm mΩ µF V DC 51.6 x 75 100 350 1200 51.6 x 75 80 1500 51.6 x 96 65 1800 51.6 x 96 55 2200 51.6 x 130 45 2700 51.6 x 130 36 3300 64.3 x 115 30 3900 64.3 x 130 24 4700 64.3 x 155 20 5600 76.9 x 115 20 5600 64.3 x 195 17 6800 76.9 x 130 17 6800 76.9 x 155 15 8200 91.0 x 157 12 10000 91.0 x 157 10 12000 91.0 x 196 8 15000 91.0 x 236 7 18000 51.6 x 75 110 400 1000 51.6 x 75 90 1200 51.6 x 96 70 1500 51.6 x 96 60 1800 51.6 x 130 50 2200 64.3 x 96 40 2700 64.3 x 115 34 3300 28 64.3 x 130 3900 64.3 x 155 24 4700 76.9 x 115 24 4700 64.3 x 195 20 5600 76.9 x 130 20 5600 76.9 x 155 16 6800 91.0 x 157 14 8200 11 91.0 x 157 10000 91.0 x 196 9 12000 91.0 x 236 8 15000 * = Mounting style 2 = for capacitors with ring clip/clamp mounting 4 = for capacitors with threaded stud IAC,max IAC,R 120 Hz 120 Hz Ordering code 40 ºC 85 ºC A A 12.2 5.8 B433*0A4128M0#0 14.1 6.7 B433*0A4158M0#0 15.9 7.6 B433*0A4188M0#0 18.2 8.6 B433*0A4228M0#0 21.1 10.1 B433*0B4278M0#0 24.3 11.5 B433*0A4338M0#0 27.2 12.9 B433*0A4398M0#0 31.4 15.5 B433*0A4478M0#0 35.4 17.6 B433*0A4568M0#0 35.5 17.6 B433*0C4568M0#0 40.8 20.3 B433*0D4688M0#0 40.1 19.8 B433*0C4688M0#0 45.3 22.4 B433*0A4828M0#0 51.3 27.0 B433*0A4109M0#0 57.9 30.3 B433*0A4129M0#0 67.1 35.2 B433*0A4159M0#0 76.0 39.9 B433*0B4189M0#0 11.5 5.5 B433*0A9108M0#0 13.0 6.2 B433*0A9128M0#0 15.1 7.2 B433*0A9158M0#0 17.1 8.1 B433*0A9188M0#0 19.8 9.4 B433*0A9228M0#0 23.0 10.9 B433*0A9278M0#0 26.2 12.4 B433*0A9338M0#0 29.4 13.9 B433*0A9398M0#0 33.5 15.9 B433*0A9478M0#0 33.5 15.9 B433*0C9478M0#0 38.0 18.1 B433*0B9568M0#0 37.5 17.8 B433*0C9568M0#0 44.7 21.2 B433*0A9688M0#0 47.8 24.1 B433*0A9828M0#0 54.9 27.5 B433*0A9109M0#0 61.8 31.1 B433*0A9129M0#0 72.2 36.3 B433*0B9159M0#0 # = Insulation feature 0 = PVC insulation 6 = PET insulation Page 6 of 9 B43320,B43340 Capacitors with screw terminals 螺钉式电容器 Long life industrial - 85ºC 长寿命工业型 - 85ºC Technical dates and ordering codes VR ESRtyp CR Case dimensions 120 Hz 120Hz d×l 20 °C 20 ºC mm mΩ µF V DC 51.6 x 75 95 450 1000 80 51.6 x 96 1200 51.6 x 115 65 1500 51.6 x 130 55 1800 64.3 x 96 45 2200 64.3 x 115 36 2700 64.3 x 130 30 3300 64.3 x 155 24 3900 76.9 x 115 24 3900 64.3 x 195 20 4700 76.9 x 130 20 4700 76.9 x 155 17 5600 14 91.0 x 157 6800 91.0 x 157 12 8200 91.0 x 196 10 10000 91.0 x 236 8 12000 * = Mounting style 2 = for capacitors with ring clip/clamp mounting 4 = for capacitors with threaded stud IAC,max IAC,R 120 Hz 120 Hz Ordering code 40 ºC 85 ºC A A 12.2 5.8 B433*0A5108M0#0 13.7 6.5 B433*0A5128M0#0 16.0 7.6 B433*0A5158M0#0 18.3 8.7 B433*0A5188M0#0 21.2 10.1 B433*0A5228M0#0 24.3 11.5 B433*0A5278M0#0 27.8 13.2 B433*0A5338M0#0 31.3 14.9 B433*0A5398M0#0 31.5 14.9 B433*0C5398M0#0 35.8 17.1 B433*0D5478M0#0 35.5 16.8 B433*0C5478M0#0 41.5 19.7 B433*0A5568M0#0 44.8 22.6 B433*0A5688M0#0 51.1 25.6 B433*0A5828M0#0 58.2 29.2 B433*0A5109M0#0 65.9 33.2 B433*0B5129M0#0 # = Insulation feature 0 = PVC insulation 6 = PET insulation Page 7 of 9 Bar code label and marking of the capacitor 条形码标签和电容器标签 Below is an example of bar code label on package: 以下为包装箱上条形码标签示例： Brand 品牌 B43310B9688M001 (1P) Ordering code (9K) Product order number (D) Date code (yywwdd) (T) Batch number 订购代码 订单号 日期代码（年月日） 批号 (Q) Quantity 数量 The example below shows how the capacitor sleeve are marked: 以下示例说明电容器套管上的标签内容： Logo Part number (ordering code) Rated capacitance, tolerance (in coded form) Rated voltage, climatic category Month and year of production B43310-B9688-M1 6800 µF (M) 400 V- 40/085/56 06.09 X 标志 料号（订购代码） 额定电容、容差（代码形式） 额定电压、气候分类 月.年（生产日期） The climatic category is specified according to IEC 60068–1. If there is not enough space on the case, the following codes may be used: 气候类别符合IEC 60068–1。如果壳体上没有足够空间，可使用以下代码： E.g.: 40/085/56, in coded form, would read GPF 例如：40/085/56的代码形式为GPF 1st letter (lower category temperature) 首字母（下限类别温度） Code letter 代码字母 Temperature 温度(°C) F G H -55 -40 -25 2nd letter (upper category temperature) 第二字母（上限类别温度） Code letter 代码字母 Temperature 温度(°C) K M P S U +125 +105(+100) +85 +70 +60 3rd letter (humidity) 第三字母（湿度） Letter F: withstands IEC60068-2-78 Cab (damp heat, steady state), test duration 56 days. 字母F：经受IEC 60068-2-78试验箱（湿热、恒稳态），试验周期56天。 Page 8 of 9 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “ General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PQSine, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. Page 9 of 9