B43510B9827M87

Aluminum electrolytic capacitors Capacitors with 4-/5-pin snap-in terminals and solder pins Series/Type: B43510, B43520 Date: November 2012 © EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. Capacitors with 4-/5-pin snap-in terminals and solder pins B43510, B43520 Compact  85 °C Long-life grade capacitors Applications Frequency converters Solar inverters Uninterruptible power supplies Professional power supplies Medical appliances Features Voltage derating (0.90  VR for VR ≤ 450 V) enables 105 °C operation, more details available upon request New diameter 50 mm available Extremely high volumetric efficiency High ripple current capability Many different case sizes Pinning ensures correct insertion RoHS-compatible Construction Charge/discharge-proof, polar Aluminum case, fully insulated with PVC Version with additional PET insulation cap on terminal side available for insulating the capacitor from the PCB (B43510 only) Overload protection by safety vent on the case wall Terminals 4-pin snap-in terminals (6.3 mm and 4.5 mm length) for diameter 35 to 45 mm 5-pin snap-in terminals (6.3 mm and 4.5 mm length) for diameter 50 mm Solder pin mounting on printed circuit boards, pins fit standardized spacings on PCB Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 23 B43510 B43520 B43510, B43520 Compact  85 °C Specifications and characteristics in brief Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance 385 ... 500 V DC 1.1  VR 330 ... 3300 µF ±20%  M Dissipation factor tan δ (20 °C, 120 Hz) for case diameter 35 ... 45 mm: VR ≤ 400 V DC: tan δ ≤ 0.15 VR > 400 V DC: tan δ ≤ 0.20 for case diameter 50 mm: tan δ ≤ 0.20 Leakage current Ileak (5 min, 20 °C) Self-inductance ESL Approx. 20 nH Useful life1) 85 °C; VR; IAC,R 40 °C; VR; 1.1  IAC,R > 5000 h > 250000 h Voltage endurance test 85 °C; VR 2000 h Vibration resistance test Characteristics at low temperature Requirements: ∆C/C ≤ ±20% of initial value tan δ ≤ 2 times initial specified limit Ileak ≤ initial specified limit Post test requirements: ≤ ±10% of initial value ∆C/C ≤ 1.3 times initial specified limit tan δ ≤ initial specified limit Ileak To IEC 60068-2-6, test Fc: Frequency range 10 ... 55 Hz, displacement amplitude 0.35 mm, acceleration max. 5 g, duration 3 × 2 h. Capacitor mounted by its body which is rigidly clamped to the work surface. Max. impedance VR; d = 35 ... 45 mm ≤ 400 V ratio at 100 Hz VR; d = 50 mm Z -25 °C / Z 20 °C 4 Z -40 °C / Z 20 °C 7 420 ... 450 V 500 V 385 ... 450 V 7 7 14 20 IEC climatic category To IEC 60068-1: for case diameter 35 ... 45 mm: VR ≤ 400 V DC: 40/085/56 (40 °C/+85 °C/56 days damp heat test) VR > 400 V DC: 25/085/56 (25 °C/+85 °C/56 days damp heat test) for case diameter 50 mm: 25/085/56 (25 °C/+85 °C/56 days damp heat test) The capacitors can be operated in the temperature range of 40 °C to +85 °C but the impedance at 40 °C should be taken into consideration. Detail specification Sectional specification Similar to CECC 30301-805 IEC 60384-4 1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life. Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 23 B43510, B43520 Compact  85 °C Dimensional drawings B43510, 4-pin snap-in terminals, PVC insulation Dimensions (mm) d +1 l ±2 Approx. weight (g) Packing units (pcs.) 35 35 35 35 35 40 40 40 40 40 40 40 45 45 45 45 45 45 45 63 76 88 101 126 71 89 107 125 143 161 178 90 113 136 158 181 204 226 60 36 36 36 36 33 33 33 33 33 33 33 28 28 28 28 28 28 28 Standard snap-in terminals: length (6.3 ±1) mm. Also available with length of (4.5 1) mm. All pin holes must be drilled into the PC-board, since the unconnected pins serve as mountings. These pins must be soldered to isolated pads or pads with the same potential as the negative pole. Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 23 50 60 70 80 100 40 50 60 70 80 90 100 40 50 60 70 80 90 100 B43510, B43520 Compact  85 °C B43510, 4-pin snap-in terminals, PVC insulation and PET insulation cap on terminal side Dimensions (mm) d +1.4 l +2.2/2 Approx. weight (g) Packing units (pcs.) 35 35 35 35 35 40 40 40 40 40 40 40 45 45 45 45 45 45 45 63 76 88 101 126 71 89 107 125 143 161 178 90 113 136 158 181 204 226 60 36 36 36 36 33 33 33 33 33 33 33 28 28 28 28 28 28 28 Standard snap-in terminals: length (6.3 +1/1.4) mm. Also available with length of (4.5 1.4) mm. PET insulation cap is positioned under the insulation sleeve. All pin holes must be drilled into the PC-board, since the unconnected pins serve as mountings. These pins must be soldered to isolated pads or pads with the same potential as the negative pole. Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 23 50 60 70 80 100 40 50 60 70 80 90 100 40 50 60 70 80 90 100 B43510, B43520 Compact  85 °C B43510, 5-pin snap-in terminals, PVC insulation Dimensions (mm) d +1 l ±2 Approx. weight (g) Packing units (pcs.) 50 50 50 50 50 50 50 117 148 176 204 234 263 292 28 28 28 28 28 28 28 40 50 60 70 80 90 100 Standard snap-in terminals: length (6.3 ±1) mm. Also available with length of (4.5 1) mm. All pin holes must be drilled into the PC-board, since the unconnected pin serves as mounting. This pin must be soldered to an isolated pad or a pad with the same potential as the negative pole. B43510, 5-pin snap-in terminals, PVC insulation and PET insulation cap on terminal side Dimensions (mm) Approx. d +1 l +2.2/2 weight (g) Packing units (pcs.) 50 50 50 50 50 50 50 28 28 28 28 28 28 28 40 50 60 70 80 90 100 117 148 176 204 234 263 292 Standard snap-in terminals: length (6.3 +1/1.4) mm. Also available with length of (4.5 1.4) mm. PET insulation cap is positioned under the insulation sleeve. All pin holes must be drilled into the PC-board, since the unconnected pin serves as mounting. This pin must be soldered to an isolated pad or a pad with the same potential as the negative pole. Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 23 B43510, B43520 Compact  85 °C B43520, solder pins Pole markings: Plus: +; Minus:  All pin holes must be drilled into the PC-board, since the unconnected pins serve as mountings. These pins must be soldered to isolated pads or pads with the same potential as the negative pole. Dimensions (mm) d +1 Imax Approx. weight (g) Packing units (pcs.) 35 35 35 35 35 40 40 40 40 40 40 40 63 76 88 101 126 71 89 107 125 143 161 178 60 36 36 36 36 33 33 33 33 33 33 33 54 64 74 84 104 44 54 64 74 84 94 104 Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 23 B43510, B43520 Compact  85 °C Packing of 4-/5-pin snap-in terminal and solder pin capacitors For ecological reasons the packing is pure cardboard. Ordering codes for terminal styles and insulation features Identification in 3rd block of ordering code 4-/5-pin snap-in terminal capacitors Terminal version Insulation version PVC PVC plus PET cap Standard terminals 6.3 mm M000 M080 Short terminals 4.5 mm M007 M087 Ordering examples: B43510C9188M007 } B43510C9188M080 } 4-pin snap-in capacitor with short terminals and standard PVC insulation 4-pin snap-in capacitor with standard terminals and PVC insulation with additional PET insulation cap on terminal side Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 23 B43510, B43520 Compact  85 °C Overview of available types VR (V DC) 385 400 420 450 500 Case dimensions d × l (mm) CR (µF) 330 35 × 50 40 × 40 390 35 × 60 40 × 50 470 560 35 × 50 40 × 40 35 × 70 40 × 50 45 × 40 35 × 50 40 × 40 35 × 50 40 × 40 35 × 60 40 × 50 35 × 70 40 × 60 45 × 50 680 35 × 50 40 × 40 35 × 60 40 × 50 35 × 60 40 × 50 35 × 70 40 × 50 45 × 40 35 × 100 40 × 70 45 × 50 820 35 × 60 40 × 50 35 × 60 40 × 50 45 × 40 35 × 70 40 × 60 45 × 40 35 × 80 40 × 60 45 × 50 35 × 100 40 × 80 45 × 60 1000 35 × 70 40 × 60 45 × 40 35 × 40 × 45 × 50 × 70 60 50 40 35 × 80 40 × 60 45 × 50 35 × 100 40 × 70 45 × 60 50 × 50 40 × 90 45 × 70 1200 35 × 80 40 × 60 45 × 50 35 × 80 40 × 70 45 × 50 35 × 100 40 × 70 45 × 60 50 × 50 35 × 100 40 × 80 45 × 60 45 × 80 1500 35 × 100 40 × 70 45 × 60 50 × 50 35 × 100 40 × 80 45 × 60 40 × 90 45 × 70 50 × 60 40 × 100 45 × 80 50 × 70 45 × 100 1800 40 × 90 45 × 70 50 × 60 40 × 90 45 × 70 50 × 60 40 × 100 45 × 80 50 × 70 45 × 90 50 × 80 2200 40 × 100 45 × 80 50 × 70 45 × 80 50 × 70 45 × 90 50 × 80 45 × 100 50 × 90 Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 23 B43510, B43520 Compact  85 °C VR (V DC) 385 400 420 450 500 Case dimensions d × l (mm) CR (µF) 50 × 100 2400 2700 45 × 90 50 × 80 45 × 100 50 × 80 3300 50 × 100 50 × 100 50 × 100 The capacitance and voltage ratings listed above are available in different cases upon request. Other voltage and capacitance ratings are also available upon request. Capacitors with solder pins are only available in 35 and 40 mm case diameters. Capacitors with 50 mm case diameter are only available with 5-pin snap-in terminals. Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 23 B43510, B43520 Compact  85 °C Technical data and ordering codes CR 100 Hz 20 °C µF Case dimensions d×l mm VR = 385 V DC 680 35 × 50 680 40 × 40 820 35 × 60 820 40 × 50 1000 35 × 70 1000 40 × 60 1000 45 × 40 1200 35 × 80 1200 40 × 60 1200 45 × 50 1500 35 × 100 1500 40 × 70 1500 45 × 60 1500 50 × 50 1800 40 × 90 1800 45 × 70 1800 50 × 60 2200 40 × 100 2200 45 × 80 2200 50 × 70 2700 45 × 90 2700 50 × 80 3300 50 × 100 ESRtyp 100 Hz 20 °C mΩ ESRtyp 300 Hz 60 °C mΩ Zmax 10 kHz 20 °C mΩ IAC,max 100 Hz 60 °C A IAC,R 100 Hz 85 °C A Ordering code (composition see below) 100 95 85 75 70 65 70 60 55 55 45 45 45 90 36 40 75 30 32 60 26 50 40 45 36 36 28 30 22 30 26 20 22 20 17 19 30 14 16 26 12 13 20 12 18 14 130 120 110 100 85 75 85 75 65 70 60 55 55 130 45 50 110 40 40 90 32 75 60 6.84 6.68 8.05 7.92 9.45 9.35 8.16 10.9 10.2 9.63 13.4 12.1 11.4 10.1 14.7 13.3 12.0 17.0 15.5 13.9 18.0 15.9 19.5 3.49 3.40 4.11 4.04 4.82 4.77 4.16 5.57 5.23 4.91 6.84 6.20 5.86 5.18 7.51 6.80 6.12 8.67 7.91 7.11 9.18 8.14 9.96 B435*0A3687M0## B435*0C3687M0## B435*0A3827M0## B435*0B3827M0## B435*0A3108M0## B435*0B3108M0## B43510C3108M0## B435*0A3128M0## B435*0C3128M0## B43510D3128M0## B435*0C3158M0## B435*0D3158M0## B43510B3158M0## B43510E3158M0## B435*0C3188M0## B43510B3188M0## B43510D3188M0## B435*0A3228M0## B43510B3228M0## B43510C3228M0## B43510B3278M0## B43510C3278M0## B43510A3338M0## Capacitors with solder pins are only available in 35 and 40 mm case diameters. Capacitors with 50 mm case diameter are only available with 5-pin snap-in terminals. Composition of ordering code * = Terminal type 1 = 4-/5-pin snap-in terminals 2 = solder pin Please read Cautions and warnings and Important notes at the end of this document. ## = Terminal style and insulation feature 00 = solder pin or 4-/5-pin snap-in standard terminals and PVC insulation 07 = 4-/5-pin snap-in short terminals and PVC insulation 80 = 4-/5-pin snap-in standard terminals and PVC insulation with additional PET insulation cap on terminal side 87 = 4-/5-pin snap-in short terminals and PVC insulation with additional PET insulation cap on terminal side Page 11 of 23 B43510, B43520 Compact  85 °C Technical data and ordering codes CR 100 Hz 20 °C µF Case dimensions d×l mm VR = 400 V DC 560 35 × 50 560 40 × 40 680 35 × 60 680 40 × 50 820 35 × 60 820 40 × 50 820 45 × 40 1000 35 × 70 1000 40 × 60 1000 45 × 50 1000 50 × 40 1200 35 × 80 1200 40 × 70 1200 45 × 50 1500 35 × 100 1500 40 × 80 1500 45 × 60 1800 40 × 90 1800 45 × 70 1800 50 × 60 2200 45 × 80 2200 50 × 70 2700 45 × 100 2700 50 × 80 3300 50 × 100 ESRtyp 100 Hz 20 °C mΩ ESRtyp 300 Hz 60 °C mΩ Zmax 10 kHz 20 °C mΩ IAC,max 100 Hz 60 °C A IAC,R 100 Hz 85 °C A Ordering code (composition see below) 120 110 100 95 85 80 80 70 65 65 130 60 55 55 50 45 45 36 40 70 32 60 26 50 40 50 40 40 32 40 28 32 32 24 26 45 26 20 24 22 16 20 14 16 24 14 20 11 18 14 150 140 130 110 110 100 100 90 80 80 180 75 65 70 60 55 60 45 50 110 40 85 32 70 60 6.21 6.06 7.33 7.21 8.05 7.92 7.39 9.45 9.35 8.79 7.94 10.9 10.8 9.63 13.4 12.8 11.4 14.7 13.3 12.0 15.5 13.9 18.7 15.9 19.5 3.17 3.09 3.74 3.68 4.11 4.04 3.77 4.82 4.77 4.48 4.05 5.57 5.54 4.91 6.84 6.53 5.86 7.51 6.80 6.12 7.91 7.11 9.58 8.14 9.96 B435*0A9567M0## B435*0B9567M0## B435*0A9687M0## B435*0B9687M0## B435*0A9827M0## B435*0B9827M0## B43510C9827M0## B435*0A9108M0## B435*0B9108M0## B43510C9108M0## B43510E9108M0## B435*0D9128M0## B435*0B9128M0## B43510C9128M0## B435*0A9158M0## B435*0B9158M0## B43510D9158M0## B435*0C9188M0## B43510D9188M0## B43510E9188M0## B43510B9228M0## B43510C9228M0## B43510A9278M0## B43510B9278M0## B43510B9338M0## Capacitors with solder pins are only available in 35 and 40 mm case diameters. Capacitors with 50 mm case diameter are only available with 5-pin snap-in terminals. Composition of ordering code * = Terminal type 1 = 4-/5-pin snap-in terminals 2 = solder pin Please read Cautions and warnings and Important notes at the end of this document. ## = Terminal style and insulation feature 00 = solder pin or 4-/5-pin snap-in standard terminals and PVC insulation 07 = 4-/5-pin snap-in short terminals and PVC insulation 80 = 4-/5-pin snap-in standard terminals and PVC insulation with additional PET insulation cap on terminal side 87 = 4-/5-pin snap-in short terminals and PVC insulation with additional PET insulation cap on terminal side Page 12 of 23 B43510, B43520 Compact  85 °C Technical data and ordering codes CR 100 Hz 20 °C µF Case dimensions d×l mm VR = 420 V DC 560 35 × 50 560 40 × 40 680 35 × 60 680 40 × 50 820 35 × 70 820 40 × 60 820 45 × 40 1000 35 × 80 1000 40 × 60 1000 45 × 50 1200 35 × 100 1200 40 × 70 1200 45 × 60 1200 50 × 50 1500 40 × 90 1500 45 × 70 1500 50 × 60 1800 40 × 100 1800 45 × 80 1800 50 × 70 2200 45 × 90 2200 50 × 80 2700 50 × 100 ESRtyp 100 Hz 20 °C mΩ ESRtyp 300 Hz 60 °C mΩ Zmax 10 kHz 20 °C mΩ IAC,max 100 Hz 60 °C A IAC,R 100 Hz 85 °C A Ordering code (composition see below) 220 210 180 170 150 140 150 120 120 120 100 100 100 110 80 80 90 65 70 75 55 60 50 70 60 55 45 45 40 45 40 34 36 32 28 30 36 22 24 28 19 20 24 17 20 16 310 290 250 240 210 200 210 180 170 170 150 140 140 160 110 120 130 100 100 110 80 90 75 6.21 6.06 7.33 7.21 8.56 8.47 7.39 9.98 9.35 8.79 12.0 10.8 10.2 9.46 13.4 12.1 11.2 15.3 14.0 13.0 16.2 14.9 18.2 3.17 3.09 3.74 3.68 4.36 4.32 3.77 5.09 4.77 4.48 6.12 5.54 5.24 4.82 6.85 6.20 5.74 7.84 7.15 6.65 8.29 7.64 9.31 B435*0A0567M0## B435*0B0567M0## B435*0A0687M0## B435*0B0687M0## B435*0A0827M0## B435*0B0827M0## B43510C0827M0## B435*0A0108M0## B435*0B0108M0## B43510C0108M0## B435*0B0128M0## B435*0A0128M0## B43510C0128M0## B43510D0128M0## B435*0C0158M0## B43510B0158M0## B43510D0158M0## B435*0A0188M0## B43510B0188M0## B43510C0188M0## B43510A0228M0## B43510B0228M0## B43510A0278M0## Capacitors with solder pins are only available in 35 and 40 mm case diameters. Capacitors with 50 mm case diameter are only available with 5-pin snap-in terminals. Composition of ordering code * = Terminal type 1 = 4-/5-pin snap-in terminals 2 = solder pin Please read Cautions and warnings and Important notes at the end of this document. ## = Terminal style and insulation feature 00 = solder pin or 4-/5-pin snap-in standard terminals and PVC insulation 07 = 4-/5-pin snap-in short terminals and PVC insulation 80 = 4-/5-pin snap-in standard terminals and PVC insulation with additional PET insulation cap on terminal side 87 = 4-/5-pin snap-in short terminals and PVC insulation with additional PET insulation cap on terminal side Page 13 of 23 B43510, B43520 Compact  85 °C Technical data and ordering codes CR 100 Hz 20 °C µF Case dimensions d×l mm VR = 450 V DC 470 35 × 50 470 40 × 40 560 35 × 60 560 40 × 50 680 35 × 70 680 40 × 50 680 45 × 40 820 35 × 80 820 40 × 60 820 45 × 50 1000 35 × 100 1000 40 × 70 1000 45 × 60 1000 50 × 50 1200 35 × 100 1200 40 × 80 1200 45 × 60 1500 40 × 100 1500 45 × 80 1500 50 × 70 1800 45 × 90 1800 50 × 80 2200 45 × 100 2200 50 × 90 2400 50 × 100 ESRtyp 100 Hz 20 °C mΩ ESRtyp 300 Hz 60 °C mΩ Zmax 10 kHz 20 °C mΩ IAC,max 100 Hz 60 °C A IAC,R 100 Hz 85 °C A Ordering code (composition see below) 240 230 200 200 170 160 170 140 130 140 110 110 110 120 100 90 95 75 75 80 65 65 50 55 50 70 65 60 50 50 45 50 40 36 40 34 30 32 36 30 26 28 20 22 24 19 20 16 18 16 330 320 280 270 230 220 230 190 190 190 160 150 160 170 140 130 130 100 110 110 90 100 75 80 70 5.69 5.55 6.65 6.55 7.79 7.21 6.73 9.03 8.47 7.96 10.9 9.92 9.38 9.01 12.0 11.4 10.2 14.0 12.8 12.4 14.7 14.1 16.9 16.1 17.7 2.90 2.83 3.39 3.34 3.97 3.68 3.43 4.61 4.32 4.06 5.59 5.06 4.78 4.59 6.12 5.84 5.24 7.16 6.53 6.33 7.50 7.24 8.65 8.25 9.03 B435*0A5477M0## B435*0B5477M0## B435*0A5567M0## B435*0B5567M0## B435*0A5687M0## B435*0B5687M0## B43510C5687M0## B435*0A5827M0## B435*0B5827M0## B43510D5827M0## B435*0A5108M0## B435*0B5108M0## B43510C5108M0## B43510D5108M0## B435*0D5128M0## B435*0A5128M0## B43510C5128M0## B435*0A5158M0## B43510B5158M0## B43510C5158M0## B43510B5188M0## B43510C5188M0## B43510A5228M0## B43510B5228M0## B43510A5248M0## Capacitors with solder pins are only available in 35 and 40 mm case diameters. Capacitors with 50 mm case diameter are only available with 5-pin snap-in terminals. Composition of ordering code * = Terminal type 1 = 4-/5-pin snap-in terminals 2 = solder pin Please read Cautions and warnings and Important notes at the end of this document. ## = Terminal style and insulation feature 00 = solder pin or 4-/5-pin snap-in standard terminals and PVC insulation 07 = 4-/5-pin snap-in short terminals and PVC insulation 80 = 4-/5-pin snap-in standard terminals and PVC insulation with additional PET insulation cap on terminal side 87 = 4-/5-pin snap-in short terminals and PVC insulation with additional PET insulation cap on terminal side Page 14 of 23 B43510, B43520 Compact  85 °C Technical data and ordering codes CR 100 Hz 20 °C µF Case dimensions d×l mm VR = 500 V DC 330 35 × 50 330 40 × 40 390 35 × 60 390 40 × 50 470 35 × 70 470 40 × 50 470 45 × 40 560 35 × 70 560 40 × 60 560 45 × 50 680 35 × 100 680 40 × 70 680 45 × 50 820 35 × 100 820 40 × 80 820 45 × 60 1000 40 × 90 1000 45 × 70 1200 45 × 80 1500 45 × 100 ESRtyp 100 Hz 20 °C mΩ ESRtyp 300 Hz 60 °C mΩ Zmax 10 kHz 20 °C mΩ 350 350 300 290 250 240 250 210 200 210 170 170 170 140 140 140 120 120 100 80 90 80 75 65 60 55 60 55 50 50 40 40 45 38 34 36 28 30 24 20 490 480 410 400 340 340 340 290 280 280 240 230 240 200 200 200 160 160 140 110 IAC,max 100 Hz 60 °C A 3.12 3.04 3.63 3.57 4.24 3.92 3.66 4.63 4.58 4.30 5.91 5.35 4.74 6.49 6.20 5.56 7.18 6.50 7.50 9.16 IAC,R 100 Hz 85 °C A Ordering code (composition see below) 1.59 1.55 1.85 1.82 2.16 2.00 1.87 2.36 2.33 2.19 3.01 2.73 2.42 3.31 3.16 2.83 3.66 3.31 3.82 4.67 B435*0A6337M0## B435*0B6337M0## B435*0A6397M0## B435*0B6397M0## B435*0A6477M0## B435*0B6477M0## B43510C6477M0## B435*0A6567M0## B435*0B6567M0## B43510D6567M0## B435*0A6687M0## B435*0B6687M0## B43510C6687M0## B435*0A6827M0## B435*0B6827M0## B43510C6827M0## B435*0C6108M0## B43510B6108M0## B43510C6128M0## B43510A6158M0## Capacitors with solder pins are only available in 35 and 40 mm case diameters. Capacitors with 50 mm case diameter are only available with 5-pin snap-in terminals. Composition of ordering code * = Terminal type 1 = 4-/5-pin snap-in terminals 2 = solder pin Please read Cautions and warnings and Important notes at the end of this document. ## = Terminal style and insulation feature 00 = solder pin or 4-/5-pin snap-in standard terminals and PVC insulation 07 = 4-/5-pin snap-in short terminals and PVC insulation 80 = 4-/5-pin snap-in standard terminals and PVC insulation with additional PET insulation cap on terminal side 87 = 4-/5-pin snap-in short terminals and PVC insulation with additional PET insulation cap on terminal side Page 15 of 23 B43510, B43520 Compact  85 °C Useful life1) depending on ambient temperature TA under ripple current operating conditions Voltage derating (0.90  VR for VR ≤ 450 V) enables 105 °C operation Frequency factor of permissible ripple current IAC versus frequency f for diameter d ≤ 45 mm Frequency factor of permissible ripple current IAC versus frequency f for diameter d = 50 mm 1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life. Please read Cautions and warnings and Important notes at the end of this document. Page 16 of 23 B43510, B43520 Compact  85 °C Frequency characteristic of ESR Typical behavior for diameter d ≤ 45 mm Frequency characteristic of ESR Typical behavior for diameter d = 50 mm Impedance Z versus frequency f Typical behavior at 20 °C for diameter d ≤ 45 mm Impedance Z versus frequency f Typical behavior at 20 °C for diameter d = 50 mm Please read Cautions and warnings and Important notes at the end of this document. Page 17 of 23 B43510, B43520 Compact  85 °C Cautions and warnings Personal safety The electrolytes used by EPCOS have been optimized both with a view to the intended application and with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide (DMAC). Furthermore, some of the high-voltage electrolytes used by EPCOS are self-extinguishing. As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no alternative materials are currently known. However, the amount of dangerous materials used in our products is limited to an absolute minimum. Materials and chemicals used in EPCOS aluminum electrolytic capacitors are continuously adapted in compliance with the EPCOS Corporate Environmental Policy and the latest EU regulations and guidelines such as RoHS, REACH/SVHC, GADSL, and ELV. MDS (Material Data Sheets) are available on the EPCOS website for all types listed in the data book. MDS for customer specific capacitors are available upon request. MSDS (Material Safety Data Sheets) are available for all of our electrolytes upon request. Nevertheless, the following rules should be observed when handling aluminum electrolytic capacitors: No electrolyte should come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected areas immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid inhaling electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water. Please read Cautions and warnings and Important notes at the end of this document. Page 18 of 23 B43510, B43520 Compact  85 °C Product safety The table below summarizes the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of chapter "General technical information". Topic Safety information Polarity Make sure that polar capacitors are connected with the right polarity. Reverse voltage Voltages polarity classes should be prevented by connecting a diode. Do not mount the capacitor with the terminals (safety vent) upside down. Mounting position of screwterminal capacitors Robustness of terminals Mounting of single-ended capacitors Soldering Soldering, cleaning agents Upper category temperature Passive flammability The following maximum tightening torques must not be exceeded when connecting screw terminals: M5: 2.5 Nm M6: 4.0 Nm The internal structure of single-ended capacitors might be damaged if excessive force is applied to the lead wires. Avoid any compressive, tensile or flexural stress. Do not move the capacitor after soldering to PC board. Do not pick up the PC board by the soldered capacitor. Do not insert the capacitor on the PC board with a hole space different to the lead space specified. Do not exceed the specified time or temperature limits during soldering. Do not allow halogenated hydrocarbons to come into contact with aluminum electrolytic capacitors. Do not exceed the upper category temperature. Avoid external energy, such as fire or electricity. Please read Cautions and warnings and Important notes at the end of this document. Page 19 of 23 Reference chapter "General technical information" 1 "Basic construction of aluminum electrolytic capacitors" 3.1.6 "Reverse voltage" 11.1. "Mounting positions of capacitors with screw terminals" 11.3 "Mounting torques" 11.4 "Mounting considerations for single-ended capacitors" 11.5 "Soldering" 11.6 "Cleaning agents" 7.2 "Maximum permissible operating temperature" 8.1 "Passive flammability" B43510, B43520 Compact  85 °C Topic Safety information Active flammability Maintenance Avoid overload of the capacitors. Storage Make periodic inspections of the capacitors. Before the inspection, make sure that the power supply is turned off and carefully discharge the electricity of the capacitors. Do not apply any mechanical stress to the capacitor terminals. Do not store capacitors at high temperatures or high humidity. Capacitors should be stored at +5 to +35 °C and a relative humidity of ≤ 75%. Breakdown strength Do not damage the insulating sleeve, especially of insulating when ring clips are used for mounting. sleeves Please read Cautions and warnings and Important notes at the end of this document. Page 20 of 23 Reference chapter "General technical information" 8.2 "Active flammability" 10 "Maintenance" 7.3 Storage conditions Reference chapter "Capacitors with screw terminals" "Screw terminals  accessories" B43510, B43520 Compact  85 °C Symbols and terms Symbol English German C CR CS CS,T Cf d dmax ESL ESR ESRf Capacitance Rated capacitance Series capacitance Series capacitance at temperature T Capacitance at frequency f Case diameter, nominal dimension Maximum case diameter Self-inductance Equivalent series resistance Equivalent series resistance at frequency f Equivalent series resistance at temperature T Frequency Current Alternating current (ripple current) Root-mean-square value of alternating current Ripple current at frequency f Maximum permissible ripple current Rated ripple current Rated ripple current for base cooling Leakage current Operating leakage current Case length, nominal dimension Maximum case length (without terminals and mounting stud) Resistance Insulation resistance Balancing resistance Temperature Temperature difference Ambient temperature Case temperature Capacitor base temperature Time Period Service life (operating hours) Kapazität Nennkapazität Serienkapazität Serienkapazität bei Temperatur T Kapazität bei Frequenz f Gehäusedurchmesser, Nennmaß Maximaler Gehäusedurchmesser Eigeninduktivität Ersatzserienwiderstand Ersatzserienwiderstand bei Frequenz f ESRT f I IAC IAC,rms IAC,f IAC,max IAC,R IAC,R (B) Ileak Ileak,op l lmax R Rins Rsymm T ∆T TA TC TB t ∆t tb Please read Cautions and warnings and Important notes at the end of this document. Ersatzserienwiderstand bei Temperatur T Frequenz Strom Wechselstrom Wechselstrom, Effektivwert Wechselstrom bei Frequenz f Maximal zulässiger Wechselstrom Nennwechselstrom Nennwechselstromstrom für Bodenkühlung Reststrom Betriebsreststrom Gehäuselänge, Nennmaß Maximale Gehäuselänge (ohne Anschlüsse und Gewindebolzen) Widerstand Isolationswiderstand Symmetrierwiderstand Temperatur Temperaturdifferenz Umgebungstemperatur Gehäusetemperatur Temperatur des Becherbodens Zeit Zeitraum Brauchbarkeitsdauer (Betriebszeit) Page 21 of 23 B43510, B43520 Compact  85 °C Symbol V VF Vop VR VS XC XL Z ZT tan δ λ ε0 εr ω English Voltage Forming voltage Operating voltage Rated voltage, DC voltage Surge voltage Capacitive reactance Inductive reactance Impedance Impedance at temperature T Dissipation factor Failure rate Absolute permittivity Relative permittivity Angular velocity; 2  π  f German Spannung Formierspannung Betriebsspannung Nennspannung, Gleichspannung Spitzenspannung Kapazitiver Blindwiderstand Induktiver Blindwiderstand Scheinwiderstand Scheinwiderstand bei Temperatur T Verlustfaktor Ausfallrate Elektrische Feldkonstante Dielektrizitätszahl Kreisfrequenz; 2  π  f Note All dimensions are given in mm. Please read Cautions and warnings and Important notes at the end of this document. Page 22 of 23 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. Page 23 of 23