B43512B5188M000

Aluminum electrolytic capacitors Capacitors with 4-/5-pin snap-in terminals and solder pins Series/Type: B43512, B43522 Date: December 2019 © TDK Electronics AG 2019. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without TDK Electronics' prior express consent is prohibited. Capacitors with 4-/5-pin snap-in terminals and solder pins B43512, B43522 Very compact  85 °C Long-life grade capacitors Applications Frequency converters Solar inverters Uninterruptible power supplies Professional power supplies Medical appliances Not for automotive applications unless otherwise specified Features Voltage derating (0.90  VR for VR ≤ 450 V) enables 105 °C operation, more details available upon request Diameter 50 mm available Extremely high volumetric efficiency High ripple current capability Many different case sizes Pinning ensures correct insertion RoHS-compatible Construction Charge/discharge-proof, polar Aluminum case, fully insulated with PET Version with additional PET insulation cap on terminal side and PVC insulation available for insulating the capacitor from the PCB (B43512 only) Version with PVC insulation available upon request Overload protection by safety vent on the case wall Terminals 4-pin snap-in terminals (6.3 mm and 4.5 mm length) for diameter 35 to 45 mm 5-pin snap-in terminals (6.3 mm and 4.5 mm length) for diameter 50 mm Solder pin mounting on printed circuit boards, pins fit standardized spacings on PCB Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 25 B43512 B43522 B43512, B43522 Very compact  85 °C Specifications and characteristics in brief Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance 385 ... 500 V DC 1.1  VR 220 ... 3300 μF ±20%  M Dissipation factor tan δ (20 °C, 120 Hz) for case diameter 35 ... 45 mm: VR ≤ 400 V DC: tan δ ≤ 0.15 VR > 400 V DC: tan δ ≤ 0.20 for case diameter 50 mm: tan δ ≤ 0.20 Leakage current Ileak (5 min, 20 °C) Self-inductance ESL Approx. 20 nH 1) Useful life 85 °C; VR; IAC,R > 5000 h Voltage endurance test 85 °C; VR 2000 h Vibration resistance test Characteristics at low temperature Requirements: ΔC/C ≤ 20% of initial value tan δ ≤ 2 times initial specified limit Ileak ≤ initial specified limit Post test requirements: ΔC/C ≤ 10% of initial value tan δ ≤ 1.3 times initial specified limit Ileak ≤ initial specified limit To IEC 60068-2-6, test Fc: Frequency range 10 ... 55 Hz, displacement amplitude 0.35 mm, acceleration max. 5 g, duration 3 × 2 h. Capacitor mounted by its body which is rigidly clamped to the work surface. Max. impedance ratio at 100 Hz VR; d = 35 ... 45 mm ≤ 400 V 420 ... 450 V 500 V VR; d = 50 mm 385 ... 450 V Z -25 °C / Z 20 °C 4 5 7 Z -40 °C / Z 20 °C 7 10 20 IEC climatic category To IEC 60068-1: VR ≤ 450 V DC: 40/085/56 (40 °C/+85 °C/56 days damp heat test) VR = 500 V DC: 25/085/56 (25 °C/+85 °C/56 days damp heat test) The capacitors can be operated in the temperature range of 40 °C to +85 °C but the impedance at 40 °C must be taken into consideration. Sectional specification IEC 60384-4 1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life. Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 25 B43512, B43522 Very compact  85 °C Dimensional drawings B43512, 4-pin snap-in terminals, standard insulation (PET) Standard snap-in terminals: length (6.3 ±1) mm. Also available with length of (4.5 1) mm. All pin holes must be drilled into the PC-board, since the unconnected pins serve as mountings. These pins must be soldered to insulated pads or pads with the same potential as the negative pole. Please read Cautions and warnings and Important notes at the end of this document. Dimensions (mm) d +1 l ±2 35 40 35 45 35 50 55 35 35 60 35 65 35 70 35 75 35 80 35 85 90 35 35 95 40 40 40 45 40 50 40 55 40 60 40 65 40 70 40 75 40 80 40 85 90 40 40 95 45 40 45 45 45 50 45 55 45 60 65 45 45 70 45 75 45 80 45 85 45 90 45 95 45 100 Page 4 of 25 Approx. weight (g) Packing units (pcs.) 51 57 63 70 76 82 88 95 101 107 114 120 71 80 89 98 107 116 125 134 143 152 161 170 95 108 120 132 143 155 166 178 190 202 214 226 237 60 60 60 36 36 36 36 36 36 36 36 36 33 33 33 33 33 33 33 33 33 33 33 33 28 28 28 28 28 28 28 28 28 28 28 28 28 B43512, B43522 Very compact  85 °C B43512, 4-pin snap-in terminals, PVC insulation and PET insulation cap on terminal side Standard snap-in terminals: length (6.3 +1/1.4) mm. Also available with length of (4.5 1.4) mm. PET insulation cap is positioned under the insulation sleeve. All pin holes must be drilled into the PC-board, since the unconnected pins serve as mountings. These pins must be soldered to insulated pads or pads with the same potential as the negative pole. Please read Cautions and warnings and Important notes at the end of this document. Dimensions (mm) d +1.4 l +2.2/2 35 40 45 35 35 50 35 55 60 35 35 65 35 70 35 75 35 80 85 35 35 90 95 35 40 40 40 45 40 50 40 55 60 40 40 65 70 40 40 75 40 80 40 85 40 90 40 95 45 40 45 45 45 50 45 55 45 60 45 65 45 70 45 75 45 80 85 45 45 90 45 95 45 100 Page 5 of 25 Approx. weight (g) Packing units (pcs.) 51 57 63 70 76 82 88 95 101 107 114 120 71 80 89 98 107 116 125 134 143 152 161 170 95 108 120 132 143 155 166 178 190 202 214 226 237 60 60 60 36 36 36 36 36 36 36 36 36 33 33 33 33 33 33 33 33 33 33 33 33 28 28 28 28 28 28 28 28 28 28 28 28 28 B43512, B43522 Very compact  85 °C B43512, 5-pin snap-in terminals, standard insulation (PET) Dimensions (mm) d +1 l ±2 Approx. weight (g) Packing units (pcs.) 50 50 50 50 50 50 50 50 50 50 50 117 133 148 162 176 190 204 219 234 263 278 28 28 28 28 28 28 28 28 28 28 28 Standard snap-in terminals: length (6.3 ±1) mm. Also available with length of (4.5 1) mm. All pin holes must be drilled into the PC-board, since the unconnected pin serves as mounting. This pin must be soldered to an insulated pad or a pad with the same potential as the negative pole. Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 25 40 45 50 55 60 65 70 75 80 90 95 B43512, B43522 Very compact  85 °C B43512, 5-pin snap-in terminals, PVC insulation and PET insulation cap on terminal side Dimensions (mm) d +1 l +2.2/2 Approx. weight (g) Packing units (pcs.) 50 50 50 50 50 50 50 50 50 50 50 117 133 148 162 176 190 204 219 234 263 278 28 28 28 28 28 28 28 28 28 28 28 Standard snap-in terminals: length (6.3 +1/1.4) mm. Also available with length of (4.5 1.4) mm. PET insulation cap is positioned under the insulation sleeve. All pin holes must be drilled into the PC-board, since the unconnected pin serves as mounting. This pin must be soldered to an insulated pad or a pad with the same potential as the negative pole. Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 25 40 45 50 55 60 65 70 75 80 90 95 B43512, B43522 Very compact  85 °C B43522, solder pins Pole markings: Plus: +; Minus:  All pin holes must be drilled into the PC-board, since the unconnected pins serve as mountings. These pins must be soldered to insulated pads or pads with the same potential as the negative pole. Dimensions (mm) Approx. weight (g) d +1 Imax Packing units (pcs.) Dimensions (mm) Approx. weight (g) d +1 Imax Packing units (pcs.) 35 35 35 35 35 35 35 35 35 35 35 35 60 60 60 36 36 36 36 36 36 36 36 36 40 40 40 40 40 40 40 40 40 40 40 40 33 33 33 33 33 33 33 33 33 33 33 33 44 49 54 59 64 69 74 79 84 89 94 99 51 57 63 70 76 82 88 95 101 107 114 120 Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 25 44 49 54 59 64 69 74 79 84 89 94 99 71 80 89 98 107 116 125 134 143 152 161 170 B43512, B43522 Very compact  85 °C Packing of 4-/5-pin snap-in terminal and solder pin capacitors For ecological reasons the packing is pure cardboard. Ordering codes for terminal styles and insulation features Identification in 3rd block of ordering code 4-/5-pin snap-in terminal capacitors Terminal version Insulation version PET PVC plus PET cap Standard terminals 6.3 mm M060 M080 Short terminals 4.5 mm M067 M087 Ordering examples: B43512B9188M067 } 4-pin snap-in capacitor with short terminals and PET insulation B43512C9188M080 } 5-pin snap-in capacitor with standard terminals and PVC insulation with additional PET insulation cap on terminal side Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 25 B43512, B43522 Very compact  85 °C Overview of available types The capacitance and voltage ratings listed below are available in different case sizes upon request. Other voltage and capacitance ratings are also available upon request. Capacitors with solder pins are only available in 35 and 40 mm case diameters. Capacitors with 50 mm case diameter are only available with 5-pin snap-in terminals. VR (V DC) 385 400 420 450 500 Case dimensions d × l (mm) CR (μF) 220 35 × 40 270 35 × 45 330 35 × 50 40 × 40 390 35 × 40 35 × 40 35 × 55 40 × 45 470 35 × 40 35 × 40 35 × 45 35 × 45 40 × 40 35 × 60 40 × 50 45 × 40 560 35 × 45 35 × 45 40 × 40 35 × 50 40 × 40 35 × 55 40 × 45 35 × 70 40 × 55 45 × 45 680 35 × 50 40 × 40 35 × 50 40 × 40 35 × 55 40 × 45 35 × 60 40 × 50 45 × 40 35 × 80 40 × 65 45 × 50 820 35 × 55 40 × 45 35 × 60 40 × 50 45 × 40 35 × 65 40 × 50 45 × 40 35 × 70 40 × 55 45 × 45 35 × 95 40 × 75 45 × 60 1000 35 × 65 40 × 50 45 × 40 35 × 70 40 × 55 45 × 45 50 × 40 35 × 75 40 × 60 45 × 45 35 × 80 40 × 65 45 × 50 40 × 85 45 × 70 1200 35 × 75 40 × 60 45 × 45 35 × 80 40 × 60 45 × 50 50 × 45 35 × 85 40 × 70 45 × 55 50 × 50 35 × 95 40 × 75 45 × 60 50 × 55 45 × 80 1500 35 × 90 40 × 70 45 × 55 50 × 50 35 × 95 40 × 75 45 × 55 40 × 80 45 × 65 50 × 60 40 × 90 45 × 70 50 × 65 45 × 100 1800 40 × 80 45 × 60 40 × 85 45 × 65 50 × 60 40 × 95 45 × 70 45 × 80 50 × 75 Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 25 B43512, B43522 Very compact  85 °C Overview of available types The capacitance and voltage ratings listed below are available in different case sizes upon request. Other voltage and capacitance ratings are also available upon request. Capacitors with solder pins are only available in 35 and 40 mm case diameters. Capacitors with 50 mm case diameter are only available with 5-pin snap-in terminals. VR (V DC) 385 400 420 450 45 × 95 50 × 90 Case dimensions d × l (mm) CR (μF) 2200 40 × 95 45 × 75 50 × 65 45 × 80 50 × 70 45 × 85 50 × 80 2700 45 × 85 50 × 80 45 × 90 50 × 80 50 × 95 3300 50 × 95 50 × 95 Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 25 500 B43512, B43522 Very compact  85 °C Technical data and ordering codes CR 100 Hz 20 °C μF Case dimensions d×l mm VR = 385 V DC 35 × 470 35 × 560 35 × 680 40 × 680 35 × 820 40 × 820 35 × 1000 40 × 1000 45 × 1000 35 × 1200 40 × 1200 45 × 1200 35 × 1500 40 × 1500 45 × 1500 50 × 1500 40 × 1800 45 × 1800 40 × 2200 45 × 2200 50 × 2200 45 × 2700 50 × 2700 50 × 3300 40 45 50 40 55 45 65 50 40 75 60 45 90 70 55 50 80 60 95 75 65 85 80 95 ESRtyp 100 Hz 20 °C mΩ 170 140 120 120 100 100 80 85 85 70 70 75 55 55 60 90 45 50 40 40 65 34 50 40 ESRtyp 300 Hz 60 °C mΩ 50 45 36 40 32 34 26 30 32 22 24 28 17 19 22 32 16 19 14 15 22 13 18 14 Zmax 10 kHz 20 °C mΩ IAC,max 100 Hz 60 °C A IAC,R 100 Hz 85 °C A Ordering code (composition see below) 250 210 170 180 150 150 120 130 130 100 110 110 80 85 90 150 70 75 60 60 110 50 85 70 5.00 5.62 6.41 6.34 7.29 7.16 8.44 8.14 7.87 9.68 9.32 8.84 11.5 10.9 10.3 10.1 12.4 11.6 14.5 13.6 12.9 15.6 15.1 17.4 2.84 3.19 3.64 3.59 4.13 4.06 4.79 4.61 4.45 5.50 5.29 5.01 6.54 6.19 5.88 5.53 7.06 6.57 8.25 7.72 7.07 8.87 8.28 9.55 B435*2A3477M0## B435*2A3567M0## B435*2A3687M0## B435*2B3687M0## B435*2A3827M0## B435*2B3827M0## B435*2A3108M0## B435*2B3108M0## B43512C3108M0## B435*2A3128M0## B435*2B3128M0## B43512C3128M0## B435*2A3158M0## B435*2B3158M0## B43512C3158M0## B43512D3158M0## B435*2A3188M0## B43512B3188M0## B435*2A3228M0## B43512B3228M0## B43512C3228M0## B43512A3278M0## B43512B3278M0## B43512A3338M0## Capacitors with solder pins are only available in 35 and 40 mm case diameters. Capacitors with 50 mm case diameter are only available with 5-pin snap-in terminals. Composition of ordering code * = Terminal type 1 = 4-/5-pin snap-in terminals 2 = solder pin Please read Cautions and warnings and Important notes at the end of this document. ## = Terminal style and insulation feature 60 = solder pin or 4-/5-pin snap-in standard terminals and PET insulation 67 = 4-/5-pin snap-in short terminals and PET insulation 80 = 4-/5-pin snap-in standard terminals and PVC insulation with additional PET insulation cap on terminal side 87 = 4-/5-pin snap-in short terminals and PVC insulation with additional PET insulation cap on terminal side Page 12 of 25 B43512, B43522 Very compact  85 °C Technical data and ordering codes CR 100 Hz 20 °C μF Case dimensions d×l mm VR = 400 V DC 35 × 470 35 × 560 40 × 560 35 × 680 40 × 680 35 × 820 40 × 820 45 × 820 35 × 1000 40 × 1000 45 × 1000 50 × 1000 35 × 1200 40 × 1200 45 × 1200 50 × 1200 35 × 1500 40 × 1500 45 × 1500 40 × 1800 45 × 1800 50 × 1800 45 × 2200 50 × 2200 40 45 40 50 40 60 50 40 70 55 45 40 80 60 50 45 95 75 55 85 65 60 80 70 ESRtyp 100 Hz 20 °C mΩ 180 150 150 120 130 100 100 110 85 85 90 130 70 70 75 110 55 55 60 50 50 75 40 60 ESRtyp 300 Hz 60 °C mΩ 55 45 45 38 40 32 34 36 26 28 30 45 22 24 26 36 17 19 22 16 19 26 15 22 Zmax 10 kHz 20 °C mΩ IAC,max 100 Hz 60 °C A IAC,R 100 Hz 85 °C A Ordering code (composition see below) 260 220 220 180 190 150 150 160 130 130 130 210 110 110 110 180 85 85 90 75 75 120 65 100 5.03 5.66 5.74 6.46 6.36 7.41 7.33 7.22 8.57 8.32 8.17 8.03 9.84 9.39 9.14 8.99 11.7 11.1 10.4 12.7 11.9 11.7 13.9 13.4 2.85 3.21 3.26 3.66 3.61 4.21 4.16 4.10 4.87 4.72 4.63 4.38 5.59 5.32 5.19 4.91 6.65 6.31 5.91 7.21 6.76 6.39 7.90 7.32 B435*2A9477M0## B435*2A9567M0## B435*2B9567M0## B435*2A9687M0## B435*2B9687M0## B435*2A9827M0## B435*2B9827M0## B43512C9827M0## B435*2A9108M0## B435*2B9108M0## B43512C9108M0## B43512D9108M0## B435*2A9128M0## B435*2B9128M0## B43512C9128M0## B43512D9128M0## B435*2A9158M0## B435*2B9158M0## B43512C9158M0## B435*2A9188M0## B43512B9188M0## B43512C9188M0## B43512A9228M0## B43512B9228M0## Capacitors with solder pins are only available in 35 and 40 mm case diameters. Capacitors with 50 mm case diameter are only available with 5-pin snap-in terminals. Composition of ordering code * = Terminal type 1 = 4-/5-pin snap-in terminals 2 = solder pin Please read Cautions and warnings and Important notes at the end of this document. ## = Terminal style and insulation feature 60 = solder pin or 4-/5-pin snap-in standard terminals and PET insulation 67 = 4-/5-pin snap-in short terminals and PET insulation 80 = 4-/5-pin snap-in standard terminals and PVC insulation with additional PET insulation cap on terminal side 87 = 4-/5-pin snap-in short terminals and PVC insulation with additional PET insulation cap on terminal side Page 13 of 25 B43512, B43522 Very compact  85 °C Technical data and ordering codes CR 100 Hz 20 °C μF Case dimensions d×l mm VR = 400 V DC 45 × 2700 50 × 2700 50 × 3300 VR = 420 V DC 35 × 390 35 × 470 560 35 × 40 × 560 35 × 680 40 × 680 35 × 820 40 × 820 45 × 820 1000 35 × 40 × 1000 45 × 1000 35 × 1200 40 × 1200 45 × 1200 50 × 1200 40 × 1500 45 × 1500 50 × 1500 40 × 1800 ESRtyp 100 Hz 20 °C mΩ ESRtyp 300 Hz 60 °C mΩ Zmax 10 kHz 20 °C mΩ IAC,max 100 Hz 60 °C A IAC,R 100 Hz 85 °C A Ordering code (composition see below) 90 80 95 34 50 40 13 18 14 55 80 70 16.0 15.2 17.6 9.08 8.36 9.67 B43512A9278M0## B43512B9278M0## B43512A9338M0## 40 45 50 40 55 45 65 50 40 75 60 45 85 70 55 50 80 65 60 95 320 260 220 220 180 180 150 150 160 120 130 130 100 100 110 110 85 85 90 70 80 65 55 60 45 50 40 40 45 32 34 38 28 30 32 36 24 26 28 20 500 410 350 350 290 290 240 250 250 200 200 210 170 170 170 180 140 140 150 120 4.35 4.93 5.55 5.56 6.35 6.31 7.29 7.14 7.01 8.45 8.23 7.95 9.72 9.38 9.11 9.43 11.0 10.6 10.9 12.6 2.44 2.77 3.12 3.12 3.57 3.54 4.10 4.00 3.93 4.75 4.62 4.45 5.46 5.27 5.11 5.15 6.18 5.96 6.01 7.12 B435*2A0397M0## B435*2A0477M0## B435*2A0567M0## B435*2B0567M0## B435*2A0687M0## B435*2B0687M0## B435*2A0827M0## B435*2B0827M0## B43512C0827M0## B435*2A0108M0## B435*2B0108M0## B43512C0108M0## B435*2A0128M0## B435*2B0128M0## B43512C0128M0## B43512D0128M0## B435*2A0158M0## B43512B0158M0## B43512C0158M0## B435*2A0188M0## Capacitors with solder pins are only available in 35 and 40 mm case diameters. Capacitors with 50 mm case diameter are only available with 5-pin snap-in terminals. Composition of ordering code * = Terminal type 1 = 4-/5-pin snap-in terminals 2 = solder pin Please read Cautions and warnings and Important notes at the end of this document. ## = Terminal style and insulation feature 60 = solder pin or 4-/5-pin snap-in standard terminals and PET insulation 67 = 4-/5-pin snap-in short terminals and PET insulation 80 = 4-/5-pin snap-in standard terminals and PVC insulation with additional PET insulation cap on terminal side 87 = 4-/5-pin snap-in short terminals and PVC insulation with additional PET insulation cap on terminal side Page 14 of 25 B43512, B43522 Very compact  85 °C Technical data and ordering codes CR 100 Hz 20 °C μF Case dimensions d×l mm VR = 420 V DC 45 × 1800 45 × 2200 50 × 2200 50 × 2700 VR = 450 V DC 35 × 390 470 35 × 40 × 470 35 × 560 40 × 560 35 × 680 40 × 680 45 × 680 820 35 × 40 × 820 45 × 820 35 × 1000 40 × 1000 45 × 1000 35 × 1200 40 × 1200 45 × 1200 50 × 1200 40 × 1500 ESRtyp 100 Hz 20 °C mΩ ESRtyp 300 Hz 60 °C mΩ Zmax 10 kHz 20 °C mΩ IAC,max 100 Hz 60 °C A IAC,R 100 Hz 85 °C A Ordering code (composition see below) 70 85 80 95 75 60 60 50 22 18 20 16 120 95 100 80 11.9 13.8 14.2 16.4 6.69 7.80 7.79 9.02 B43512B0188M0## B43512A0228M0## B43512B0228M0## B43512A0278M0## 40 45 40 55 45 60 50 40 70 55 45 80 65 50 95 75 60 55 90 290 240 240 200 200 160 170 170 140 140 140 110 110 120 95 95 95 100 75 75 60 65 50 55 45 45 50 36 38 40 30 32 36 26 28 30 32 22 440 370 370 310 310 260 260 270 210 220 220 180 180 190 150 150 160 160 120 4.46 5.06 5.13 5.75 5.75 6.59 6.53 6.47 7.58 7.40 7.30 8.82 8.53 8.26 10.1 9.74 9.45 9.89 11.5 2.53 2.87 2.91 3.27 3.27 3.74 3.71 3.67 4.31 4.20 4.14 5.01 4.84 4.68 5.79 5.53 5.36 5.40 6.56 B435*2A5397M0## B435*2A5477M0## B435*2B5477M0## B435*2A5567M0## B435*2B5567M0## B435*2A5687M0## B435*2B5687M0## B43512C5687M0## B435*2A5827M0## B435*2B5827M0## B43512C5827M0## B435*2A5108M0## B435*2B5108M0## B43512C5108M0## B435*2A5128M0## B435*2B5128M0## B43512C5128M0## B43512D5128M0## B435*2A5158M0## Capacitors with solder pins are only available in 35 and 40 mm case diameters. Capacitors with 50 mm case diameter are only available with 5-pin snap-in terminals. Composition of ordering code * = Terminal type 1 = 4-/5-pin snap-in terminals 2 = solder pin Please read Cautions and warnings and Important notes at the end of this document. ## = Terminal style and insulation feature 60 = solder pin or 4-/5-pin snap-in standard terminals and PET insulation 67 = 4-/5-pin snap-in short terminals and PET insulation 80 = 4-/5-pin snap-in standard terminals and PVC insulation with additional PET insulation cap on terminal side 87 = 4-/5-pin snap-in short terminals and PVC insulation with additional PET insulation cap on terminal side Page 15 of 25 B43512, B43522 Very compact  85 °C Technical data and ordering codes CR 100 Hz 20 °C μF Case dimensions d×l mm VR = 450 V DC 45 × 1500 50 × 1500 45 × 1800 50 × 1800 45 × 2200 50 × 2200 VR = 500 V DC 35 × 220 35 × 270 35 × 330 40 × 330 35 × 390 40 × 390 470 35 × 40 × 470 45 × 470 35 × 560 40 × 560 45 × 560 35 × 680 40 × 680 45 × 680 35 × 820 40 × 820 ESRtyp 100 Hz 20 °C mΩ ESRtyp 300 Hz 60 °C mΩ Zmax 10 kHz 20 °C mΩ IAC,max 100 Hz 60 °C A IAC,R 100 Hz 85 °C A Ordering code (composition see below) 11.0 11.4 12.5 13.0 14.5 15.0 6.25 6.27 7.12 7.11 8.28 8.23 B43512B5158M0## B43512C5158M0## B43512A5188M0## B43512B5188M0## B43512A5228M0## B43512B5228M0## 1.27 1.45 1.66 1.69 1.87 1.89 2.13 2.13 2.14 2.43 2.40 2.40 2.81 2.76 2.72 3.26 3.16 B435*2A6227M0## B435*2A6277M0## B435*2A6337M0## B435*2B6337M0## B435*2A6397M0## B435*2B6397M0## B435*2A6477M0## B435*2B6477M0## B43512C6477M0## B435*2A6567M0## B435*2B6567M0## B43512C6567M0## B435*2A6687M0## B435*2B6687M0## B43512C6687M0## B435*2A6827M0## B435*2B6827M0## 70 65 80 75 95 90 80 80 65 70 55 55 24 26 20 22 17 18 130 130 110 110 85 90 40 45 50 40 55 45 60 50 40 70 55 45 80 65 50 95 75 540 440 360 360 310 310 260 260 260 210 220 220 180 180 180 150 150 120 100 80 85 70 70 55 60 60 50 50 50 40 40 45 34 34 850 700 570 570 480 490 400 410 410 340 340 350 280 280 290 230 240 3.20 3.67 4.20 4.27 4.71 4.76 5.38 5.39 5.41 6.13 6.07 6.07 7.10 6.96 6.88 8.23 7.97 Capacitors with solder pins are only available in 35 and 40 mm case diameters. Capacitors with 50 mm case diameter are only available with 5-pin snap-in terminals. Composition of ordering code * = Terminal type 1 = 4-/5-pin snap-in terminals 2 = solder pin Please read Cautions and warnings and Important notes at the end of this document. ## = Terminal style and insulation feature 60 = solder pin or 4-/5-pin snap-in standard terminals and PET insulation 67 = 4-/5-pin snap-in short terminals and PET insulation 80 = 4-/5-pin snap-in standard terminals and PVC insulation with additional PET insulation cap on terminal side 87 = 4-/5-pin snap-in short terminals and PVC insulation with additional PET insulation cap on terminal side Page 16 of 25 B43512, B43522 Very compact  85 °C Technical data and ordering codes CR 100 Hz 20 °C μF Case dimensions d×l mm VR = 500 V DC 45 × 60 820 40 × 85 1000 45 × 70 1000 45 × 80 1200 45 × 100 1500 ESRtyp 100 Hz 20 °C mΩ 150 120 120 100 80 ESRtyp 300 Hz 60 °C mΩ 36 28 30 26 20 Zmax 10 kHz 20 °C mΩ IAC,max 100 Hz 60 °C A IAC,R 100 Hz 85 °C A Ordering code (composition see below) 240 200 200 170 130 7.86 9.24 9.03 10.2 12.1 3.11 3.66 3.58 4.08 4.83 B43512C6827M0## B435*2A6108M0## B43512B6108M0## B43512A6128M0## B43512A6158M0## Capacitors with solder pins are only available in 35 and 40 mm case diameters. Capacitors with 50 mm case diameter are only available with 5-pin snap-in terminals. Composition of ordering code * = Terminal type 1 = 4-/5-pin snap-in terminals 2 = solder pin Please read Cautions and warnings and Important notes at the end of this document. ## = Terminal style and insulation feature 60 = solder pin or 4-/5-pin snap-in standard terminals and PET insulation 67 = 4-/5-pin snap-in short terminals and PET insulation 80 = 4-/5-pin snap-in standard terminals and PVC insulation with additional PET insulation cap on terminal side 87 = 4-/5-pin snap-in short terminals and PVC insulation with additional PET insulation cap on terminal side Page 17 of 25 B43512, B43522 Very compact  85 °C Useful life1) For useful life calculations, please use our web-based "AlCap Useful Life Calculation Tool", which can be found on the Internet under the following link: www.tdk-electronics.tdk.com/alcap The AlCap Useful Life Calculation Tool provides calculations of useful life as well as additional data for selected capacitor types under operating conditions defined by the user. In addition, it is possible to calculate useful life expectancies based on temperatures measured by the user in the application. Frequency characteristic of ESR Typical behavior Impedance Z versus frequency f Typical behavior at 20 °C 1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life. Please read Cautions and warnings and Important notes at the end of this document. Page 18 of 25 B43512, B43522 Very compact  85 °C Cautions and warnings Personal safety The electrolytes used have been optimized both with a view to the intended application and with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide (DMAC). Furthermore, some of the high-voltage electrolytes used are self-extinguishing. As far as possible, we do not use any dangerous chemicals or compounds to produce operating electrolytes, although in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no alternative materials are currently known. We do, however, restrict the amount of dangerous materials used in our products to an absolute minimum. Materials and chemicals used in our aluminum electrolytic capacitors are continuously adapted in compliance with the TDK Electronics Corporate Environmental Policy and the latest EU regulations and guidelines such as RoHS, REACH/SVHC, GADSL, and ELV. MDS (Material Data Sheets) are available on our website for all types listed in the data book. MDS for customer specific capacitors are available upon request. MSDS (Material Safety Data Sheets) are available for our electrolytes upon request. Nevertheless, the following rules should be observed when handling aluminum electrolytic capacitors: No electrolyte should come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected areas immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid inhaling electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water. Please read Cautions and warnings and Important notes at the end of this document. Page 19 of 25 B43512, B43522 Very compact  85 °C Product safety The table below summarizes the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of seperate file chapter "General technical information". Topic Polarity Reverse voltage Mounting position of screwterminal capacitors Robustness of terminals Mounting of single-ended capacitors Soldering Soldering, cleaning agents Upper category temperature Passive flammability Safety information Reference chapter "General technical information" Make sure that polar capacitors are connected 1 with the right polarity. "Basic construction of aluminum electrolytic capacitors" Voltages of opposite polarity should be prevented 3.1.6 by connecting a diode. "Reverse voltage" Screw terminal capacitors must not be mounted 11.1. with terminals facing down unless otherwise "Mounting positions of specified. capacitors with screw terminals" The following maximum tightening torques must 11.3 not be exceeded when connecting screw "Mounting torques" terminals: M5: 2.5 Nm M6: 4.0 Nm The internal structure of single-ended capacitors 11.4 might be damaged if excessive force is applied to "Mounting the lead wires. considerations for Avoid any compressive, tensile or flexural stress. single-ended capacitors" Do not move the capacitor after soldering to PC board. Do not pick up the PC board by the soldered capacitor. Do not insert the capacitor on the PC board with a hole space different to the lead space specified. Do not exceed the specified time or temperature 11.5 limits during soldering. "Soldering" Do not allow halogenated hydrocarbons to come 11.6 into contact with aluminum electrolytic capacitors. "Cleaning agents" Do not exceed the upper category temperature. 7.2 "Maximum permissible operating temperature" Avoid external energy, e.g. fire. 8.1 "Passive flammability" Please read Cautions and warnings and Important notes at the end of this document. Page 20 of 25 B43512, B43522 Very compact  85 °C Topic Safety information Active flammability Maintenance Avoid overload of the capacitors. Storage Make periodic inspections of the capacitors. Before the inspection, make sure that the power supply is turned off and carefully discharge the capacitors. Do not apply excessive mechanical stress to the capacitor terminals when mounting. Do not store capacitors at high temperatures or high humidity. Capacitors should be stored at +5 to +35 °C and a relative humidity of ≤ 75%. Breakdown strength Do not damage the insulating sleeve, especially of insulating when ring clips are used for mounting. sleeves Reference chapter "General technical information" 8.2 "Active flammability" 10 "Maintenance" 7.3 "Shelf life and storage conditions" Reference chapter "Capacitors with screw terminals" "Screw terminals  accessories" Display of ordering codes for TDK Electronics products The ordering code for one and the same product can be represented differently in data sheets, data books, other publications, on the company website, or in order-related documents such as shipping notes, order confirmations and product labels. The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products. Detailed information can be found on the Internet under www.tdk-electronics.tdk.com/orderingcodes. Please read Cautions and warnings and Important notes at the end of this document. Page 21 of 25 B43512, B43522 Very compact  85 °C Symbols and terms Symbol English German C CR CS CS,T Cf d dmax ESL ESR ESRf Capacitance Rated capacitance Series capacitance Series capacitance at temperature T Capacitance at frequency f Case diameter, nominal dimension Maximum case diameter Self-inductance Equivalent series resistance Equivalent series resistance at frequency f Equivalent series resistance at temperature T Frequency Current Alternating current (ripple current) Root-mean-square value of alternating current Ripple current at frequency f Maximum permissible ripple current Rated ripple current Leakage current Operating leakage current Case length, nominal dimension Maximum case length (without terminals and mounting stud) Resistance Insulation resistance Balancing resistance Temperature Temperature difference Ambient temperature Case temperature Capacitor base temperature Time Period Service life (operating hours) Kapazität Nennkapazität Serienkapazität Serienkapazität bei Temperatur T Kapazität bei Frequenz f Gehäusedurchmesser, Nennmaß Maximaler Gehäusedurchmesser Eigeninduktivität Ersatzserienwiderstand Ersatzserienwiderstand bei Frequenz f ESRT f I IAC IAC,RMS IAC,f IAC,max IAC,R Ileak Ileak,op l lmax R Rins Rsymm T ΔT TA TC TB t Δt tb Please read Cautions and warnings and Important notes at the end of this document. Ersatzserienwiderstand bei Temperatur T Frequenz Strom Wechselstrom Wechselstrom, Effektivwert Wechselstrom bei Frequenz f Maximal zulässiger Wechselstrom Nennwechselstrom Reststrom Betriebsreststrom Gehäuselänge, Nennmaß Maximale Gehäuselänge (ohne Anschlüsse und Gewindebolzen) Widerstand Isolationswiderstand Symmetrierwiderstand Temperatur Temperaturdifferenz Umgebungstemperatur Gehäusetemperatur Temperatur des Gehäusebodens Zeit Zeitraum Brauchbarkeitsdauer (Betriebszeit) Page 22 of 25 B43512, B43522 Very compact  85 °C Symbol V VF Vop VR VS XC XL Z ZT tan δ λ ε0 εr ω English Voltage Forming voltage Operating voltage Rated voltage, DC voltage Surge voltage Capacitive reactance Inductive reactance Impedance Impedance at temperature T Dissipation factor Failure rate Absolute permittivity Relative permittivity Angular velocity; 2  π  f German Spannung Formierspannung Betriebsspannung Nennspannung, Gleichspannung Spitzenspannung Kapazitiver Blindwiderstand Induktiver Blindwiderstand Scheinwiderstand Scheinwiderstand bei Temperatur T Verlustfaktor Ausfallrate Elektrische Feldkonstante Dielektrizitätszahl Kreisfrequenz; 2  π  f Note All dimensions are given in mm. Please read Cautions and warnings and Important notes at the end of this document. Page 23 of 25 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, we are either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether a product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.tdk-electronics.tdk.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to our General Terms and Conditions of Supply. Page 24 of 25 Important notes 7. Our manufacturing sites serving the automotive business apply the IATF 16949 standard. The IATF certifications confirm our compliance with requirements regarding the quality management system in the automotive industry. Referring to customer requirements and customer specific requirements (“CSR”) TDK always has and will continue to have the policy of respecting individual agreements. Even if IATF 16949 may appear to support the acceptance of unilateral requirements, we hereby like to emphasize that only requirements mutually agreed upon can and will be implemented in our Quality Management System. For clarification purposes we like to point out that obligations from IATF 16949 shall only become legally binding if individually agreed upon. 8. The trade names EPCOS, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CTVS, DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PowerHap, PQSine, PQvar, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.tdk-electronics.tdk.com/trademarks. Release 2018-10 Page 25 of 25