B43515B0397M

Aluminum electrolytic capacitors Capacitors with 4-pin snap-in terminals and solder pins Series/Type: B43515, B43525 Date: November 2012 © EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. Capacitors with 4-pin snap-in terminals and solder pins B43515, B43525 Compact  105 °C Long-life grade capacitors Applications Frequency converters Solar inverters Uninterruptible power supplies Professional power supplies Medical appliances Features Long useful life High reliability and high ripple current capability High volumetric efficiency Many different case sizes Pinning ensures correct insertion RoHS-compatible Construction Charge/discharge-proof, polar Aluminum case, fully insulated with PVC Version with additional PET insulation cap on terminal side available for insulating the capacitor from the PCB (B43515 only) Overload protection by safety vent on the case wall Terminals 4-pin snap-in terminals (6.3 mm and 4.5 mm length) Solder pin mounting on printed circuit boards, pins fit standardized spacings on PCB Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 20 B43515 B43525 B43515, B43525 Compact  105 °C Specifications and characteristics in brief Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance 350 ... 450 V DC 1.1  VR 390 ... 2700 µF ±20%  M Dissipation factor tan δ (20 °C, 120 Hz) VR ≤ 400 V DC: tan δ ≤ 0.15 VR > 400 V DC: tan δ ≤ 0.20 Leakage current Ileak (5 min, 20 °C) Self-inductance ESL Useful life1) 105 °C; VR; IAC,R 85 °C; VR; IAC,max 40 °C; VR; 2.2  IAC,R Voltage endurance test 105 °C; VR Vibration resistance test Characteristics at low temperature Approx. 20 nH > 3000 h > 7000 h > 200000 h 2000 h Requirements: ∆C/C ≤ ±20% of initial value tan δ ≤ 2 times initial specified limit Ileak ≤ initial specified limit Post test requirements: ≤ ±10% of initial value ∆C/C ≤ 1.3 times initial specified limit tan δ ≤ initial specified limit Ileak To IEC 60068-2-6, test Fc: Frequency range 10 ... 55 Hz, displacement amplitude 0.35 mm, acceleration max. 5 g, duration 3 × 2 h. Capacitor mounted by its body which is rigidly clamped to the work surface. Max. impedance ratio at 100 Hz VR ≤ 400 V Z -25 °C / Z 20 °C 4 Z -40 °C / Z 20 °C 7 > 400 V 7 14 IEC climatic category To IEC 60068-1: VR ≤ 400 V DC: 40/105/56 (40 °C/+105 °C/56 days damp heat test) VR > 400 V DC: 25/105/56 (25 °C/+105 °C/56 days damp heat test) The capacitors can be operated in the temperature range of 40 °C to +105 °C but the impedance at 40 °C should be taken into consideration. Detail specification Sectional specification Similar to CECC 30301-808 IEC 60384-4 1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life. Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 20 B43515, B43525 Compact  105 °C Dimensional drawings B43515, 4-pin snap-in terminals, PVC insulation Standard snap-in terminals: length (6.3 ±1) mm. Also available with length of (4.5 1) mm. All pin holes must be drilled into the PC-board, since the unconnected pins serve as mountings. These pins must be soldered to isolated pads or pads with the same potential as the negative pole. Please read Cautions and warnings and Important notes at the end of this document. Dimensions (mm) d +1 l ±2 Approx. weight (g) Packing units (pcs.) 35 35 35 35 35 35 35 35 45 50 55 60 65 70 75 80 57 63 70 76 82 88 95 101 60 60 36 36 36 36 36 36 40 40 40 40 40 40 40 40 40 40 45 45 45 45 45 45 45 45 45 45 45 40 45 50 60 65 70 75 80 90 95 40 45 50 60 65 70 75 80 90 95 100 71 80 89 107 116 125 134 143 161 170 95 108 120 143 155 166 178 190 214 226 237 33 33 33 33 33 33 33 33 33 33 28 28 28 28 28 28 28 28 28 28 28 Page 4 of 20 B43515, B43525 Compact  105 °C B43515, 4-pin snap-in terminals, PVC insulation and PET insulation cap on terminal side Standard snap-in terminals: length (6.3 +1/1.4) mm. Also available with length of (4.5 1.4) mm. PET insulation cap is positioned under the insulation sleeve. All pin holes must be drilled into the PC-board, since the unconnected pins serve as mountings. These pins must be soldered to isolated pads or pads with the same potential as the negative pole. Please read Cautions and warnings and Important notes at the end of this document. Dimensions (mm) d +1 l ±2 Approx. weight (g) Packing units (pcs.) 35 35 35 35 35 35 35 35 45 50 55 60 65 70 75 80 57 63 70 76 82 88 95 101 60 60 36 36 36 36 36 36 40 40 40 40 40 40 40 40 40 40 45 45 45 45 45 45 45 45 45 45 45 40 45 50 60 65 70 75 80 90 95 40 45 50 60 65 70 75 80 90 95 100 71 80 89 107 116 125 134 143 161 170 95 108 120 143 155 166 178 190 214 226 237 33 33 33 33 33 33 33 33 33 33 28 28 28 28 28 28 28 28 28 28 28 Page 5 of 20 B43515, B43525 Compact  105 °C B43525, solder pins Pole markings: Plus: +; Minus:  All pin holes must be drilled into the PC-board, since the unconnected pins serve as mountings. These pins must be soldered to isolated pads or pads with the same potential as the negative pole. Dimensions (mm) d +1 Imax Approx. weight (g) Packing units (pcs.) Dimensions (mm) d +1 Imax Approx. weight (g) Packing units (pcs.) 35 35 35 35 35 35 35 35 57 63 70 76 82 88 95 101 60 60 36 36 36 36 36 36 40 40 40 40 40 40 40 40 40 40 71 80 89 107 116 125 134 143 161 170 33 33 33 33 33 33 33 33 33 33 49 54 59 64 69 74 79 84 Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 20 44 49 54 64 69 74 79 84 94 99 B43515, B43525 Compact  105 °C Packing of 4-pin snap-in terminal and solder pin capacitors For ecological reasons the packing is pure cardboard. Ordering codes for terminal styles and insulation features Identification in 3rd block of ordering code 4-pin snap-in terminal capacitors Terminal version Insulation version PVC PVC plus PET cap Standard terminals 6.3 mm M000 M080 Short terminals 4.5 mm M007 M087 Ordering examples: B43515A9188M007 } B43515A9188M080 } 4-pin snap-in capacitor with short terminals and standard PVC insulation 4-pin snap-in capacitor with standard terminals and PVC insulation with additional PET insulation cap on terminal side Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 20 B43515, B43525 Compact  105 °C Overview of available types VR (V DC) 350 400 420 450 35 × 45 40 × 40 35 × 50 40 × 40 35 × 45 40 × 40 35 × 55 40 × 45 35 × 55 40 × 45 45 × 40 Case dimensions d × l (mm) CR (µF) 390 470 560 35 × 45 40 × 40 35 × 55 40 × 45 45 × 40 35 × 60 40 × 50 45 × 40 35 × 65 40 × 50 45 × 40 680 35 × 55 40 × 45 35 × 65 40 × 50 45 × 40 35 × 70 40 × 60 45 × 45 35 × 75 40 × 60 45 × 50 820 35 × 65 40 × 50 45 × 40 35 × 75 40 × 60 45 × 45 35 × 80 40 × 60 45 × 50 40 × 70 45 × 50 1000 35 × 75 40 × 60 45 × 45 40 × 65 45 × 50 40 × 75 45 × 60 40 × 80 45 × 65 1200 40 × 65 45 × 50 40 × 80 45 × 60 40 × 90 45 × 70 40 × 95 45 × 75 1500 40 × 80 45 × 65 45 × 70 45 × 80 45 × 90 1800 40 × 95 45 × 75 45 × 90 45 × 95 2200 45 × 90 2700 45 × 100 The capacitance and voltage ratings listed above are available in different cases upon request. Other voltage and capacitance ratings are also available upon request. Capacitors with solder pins are only available in 35 and 40 mm case diameters. Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 20 B43515, B43525 Compact  105 °C Technical data and ordering codes CR 100 Hz 20 °C µF Case dimensions d×l mm VR = 350 V DC 560 35 × 45 560 40 × 40 680 35 × 55 680 40 × 45 820 35 × 65 820 40 × 50 820 45 × 40 1000 35 × 75 1000 40 × 60 1000 45 × 45 1200 40 × 65 1200 45 × 50 1500 40 × 80 1500 45 × 65 1800 40 × 95 1800 45 × 75 2200 45 × 90 2700 45 × 100 ESRtyp 100 Hz 20 °C mΩ Zmax 10 kHz 20 °C mΩ IAC,max 100 Hz 60 °C A IAC,max 100 Hz 85 °C A IAC,R 100 Hz 105 °C A Ordering code (composition see below) 160 160 130 130 110 110 110 90 90 90 75 75 60 60 50 50 40 35 200 200 160 160 140 140 140 110 110 110 100 100 75 75 65 65 50 45 6.22 6.31 7.39 7.24 8.09 8.25 7.70 9.46 9.11 8.26 10.2 9.40 12.4 11.5 14.6 13.3 15.8 18.3 4.65 4.72 5.52 5.41 6.05 6.17 5.76 7.08 6.82 6.18 7.70 7.02 9.33 8.62 10.9 9.97 11.8 13.6 2.30 2.33 2.73 2.68 2.99 3.05 2.85 3.50 3.37 3.06 3.81 3.47 4.62 4.27 5.43 4.93 5.86 6.77 B435*5A4567M0## B435*5B4567M0## B435*5A4687M0## B435*5B4687M0## B435*5A4827M0## B435*5B4827M0## B43515C4827M0## B435*5A4108M0## B435*5B4108M0## B43515C4108M0## B435*5A4128M0## B43515B4128M0## B435*5A4158M0## B43515B4158M0## B435*5A4188M0## B43515B4188M0## B43515A4228M0## B43515A4278M0## Capacitors with solder pins are only available in 35 and 40 mm case diameters. Composition of ordering code * = Terminal type 1 = 4-pin snap-in terminals 2 = solder pin Please read Cautions and warnings and Important notes at the end of this document. ## = Terminal style and insulation feature 00 = solder pin or 4-pin snap-in standard terminals and PVC insulation 07 = 4-pin snap-in short terminals and PVC insulation 80 = 4-pin snap-in standard terminals and PVC insulation with additional PET insulation cap on terminal side 87 = 4-pin snap-in short terminals and PVC insulation with additional PET insulation cap on terminal side Page 9 of 20 B43515, B43525 Compact  105 °C Technical data and ordering codes CR 100 Hz 20 °C µF Case dimensions d×l mm VR = 400 V DC 470 35 × 470 40 × 560 35 × 560 40 × 560 45 × 680 35 × 680 40 × 680 45 × 820 35 × 820 40 × 820 45 × 1000 40 × 1000 45 × 1200 40 × 1200 45 × 1500 45 × 1800 45 × 45 40 55 45 40 65 50 40 75 60 45 65 50 80 60 70 90 ESRtyp 100 Hz 20 °C mΩ Zmax 10 kHz 20 °C mΩ IAC,max 100 Hz 60 °C A IAC,max 100 Hz 85 °C A IAC,R 100 Hz 105 °C A Ordering code (composition see below) 190 190 160 160 160 130 130 130 110 110 110 90 90 75 75 60 50 240 240 200 200 200 160 160 160 140 140 140 110 110 100 100 75 65 5.70 5.80 6.70 6.60 6.40 7.40 7.50 7.00 8.60 8.30 7.50 9.40 8.60 11.1 10.0 11.8 14.3 4.26 4.32 5.01 4.91 4.76 5.51 5.62 5.24 6.41 6.17 5.60 7.03 6.41 8.35 7.49 8.86 10.7 2.11 2.14 2.48 2.43 2.35 2.73 2.78 2.59 3.17 3.05 2.77 3.48 3.17 4.13 3.70 4.39 5.30 B435*5A9477M0## B435*5B9477M0## B435*5A9567M0## B435*5B9567M0## B43515C9567M0## B435*5A9687M0## B435*5B9687M0## B43515C9687M0## B435*5A9827M0## B435*5B9827M0## B43515C9827M0## B435*5A9108M0## B43515B9108M0## B435*5A9128M0## B43515B9128M0## B43515A9158M0## B43515A9188M0## Capacitors with solder pins are only available in 35 and 40 mm case diameters. Composition of ordering code * = Terminal type 1 = 4-pin snap-in terminals 2 = solder pin Please read Cautions and warnings and Important notes at the end of this document. ## = Terminal style and insulation feature 00 = solder pin or 4-pin snap-in standard terminals and PVC insulation 07 = 4-pin snap-in short terminals and PVC insulation 80 = 4-pin snap-in standard terminals and PVC insulation with additional PET insulation cap on terminal side 87 = 4-pin snap-in short terminals and PVC insulation with additional PET insulation cap on terminal side Page 10 of 20 B43515, B43525 Compact  105 °C Technical data and ordering codes CR 100 Hz 20 °C µF Case dimensions d×l mm VR = 420 V DC 390 35 × 390 40 × 470 35 × 470 40 × 560 35 × 560 40 × 560 45 × 680 35 × 680 40 × 680 45 × 820 35 × 820 40 × 820 45 × 1000 40 × 1000 45 × 1200 40 × 1200 45 × 1500 45 × 1800 45 × 45 40 55 45 60 50 40 70 60 45 80 60 50 75 60 90 70 80 95 ESRtyp 100 Hz 20 °C mΩ Zmax 10 kHz 20 °C mΩ IAC,max 100 Hz 60 °C A IAC,max 100 Hz 85 °C A IAC,R 100 Hz 105 °C A Ordering code (composition see below) 390 390 330 330 270 270 270 230 230 230 190 190 190 150 150 130 130 100 85 480 480 400 400 330 330 330 280 280 280 230 230 230 190 190 160 160 130 110 5.20 5.30 6.10 6.00 6.90 6.80 6.40 7.60 7.50 6.80 8.80 8.30 7.80 9.90 9.10 11.7 10.6 12.4 14.6 3.88 3.94 4.59 4.50 5.18 5.10 4.76 5.68 5.62 5.10 6.58 6.17 5.80 7.43 6.83 8.76 7.93 9.33 10.9 1.92 1.95 2.27 2.23 2.56 2.52 2.35 2.81 2.78 2.52 3.26 3.05 2.87 3.67 3.38 4.33 3.92 4.62 5.42 B435*5A0397M0## B435*5B0397M0## B435*5A0477M0## B435*5B0477M0## B435*5A0567M0## B435*5B0567M0## B43515C0567M0## B435*5A0687M0## B435*5B0687M0## B43515C0687M0## B435*5A0827M0## B435*5B0827M0## B43515C0827M0## B435*5A0108M0## B43515B0108M0## B435*5A0128M0## B43515B0128M0## B43515A0158M0## B43515A0188M0## Capacitors with solder pins are only available in 35 and 40 mm case diameters. Composition of ordering code * = Terminal type 1 = 4-pin snap-in terminals 2 = solder pin Please read Cautions and warnings and Important notes at the end of this document. ## = Terminal style and insulation feature 00 = solder pin or 4-pin snap-in standard terminals and PVC insulation 07 = 4-pin snap-in short terminals and PVC insulation 80 = 4-pin snap-in standard terminals and PVC insulation with additional PET insulation cap on terminal side 87 = 4-pin snap-in short terminals and PVC insulation with additional PET insulation cap on terminal side Page 11 of 20 B43515, B43525 Compact  105 °C Technical data and ordering codes CR 100 Hz 20 °C µF Case dimensions d×l mm VR = 450 V DC 390 35 × 390 40 × 470 35 × 470 40 × 470 45 × 560 35 × 560 40 × 560 45 × 680 35 × 680 40 × 680 45 × 820 40 × 820 45 × 1000 40 × 1000 45 × 1200 40 × 1200 45 × 1500 45 × 50 40 55 45 40 65 50 40 75 60 50 70 50 80 65 95 75 90 ESRtyp 100 Hz 20 °C mΩ Zmax 10 kHz 20 °C mΩ IAC,max 100 Hz 60 °C A 390 390 330 330 330 270 270 270 230 230 230 190 190 150 150 130 130 100 480 480 400 400 400 330 330 330 280 280 280 230 230 190 190 160 160 130 5.40 5.30 6.10 6.00 5.80 6.70 6.80 6.40 7.80 7.50 7.10 8.80 7.80 10.1 9.40 11.9 10.8 13.0 IAC,max 100 Hz 85 °C A 4.04 3.94 4.59 4.50 4.36 5.00 5.10 4.76 5.84 5.62 5.28 6.55 5.80 7.62 7.04 8.95 8.14 9.78 IAC,R 100 Hz 105 °C A Ordering code (composition see below) 2.00 1.95 2.27 2.23 2.15 2.47 2.52 2.35 2.89 2.78 2.61 3.24 2.87 3.77 3.48 4.43 4.03 4.84 B435*5A5397M0## B435*5B5397M0## B435*5A5477M0## B435*5B5477M0## B43515C5477M0## B435*5A5567M0## B435*5B5567M0## B43515C5567M0## B435*5A5687M0## B435*5B5687M0## B43515C5687M0## B435*5A5827M0## B43515B5827M0## B435*5A5108M0## B43515B5108M0## B435*5A5128M0## B43515B5128M0## B43515A5158M0## Capacitors with solder pins are only available in 35 and 40 mm case diameters. Composition of ordering code * = Terminal type 1 = 4-pin snap-in terminals 2 = solder pin Please read Cautions and warnings and Important notes at the end of this document. ## = Terminal style and insulation feature 00 = solder pin or 4-pin snap-in standard terminals and PVC insulation 07 = 4-pin snap-in short terminals and PVC insulation 80 = 4-pin snap-in standard terminals and PVC insulation with additional PET insulation cap on terminal side 87 = 4-pin snap-in short terminals and PVC insulation with additional PET insulation cap on terminal side Page 12 of 20 B43515, B43525 Compact  105 °C Useful life1) depending on ambient temperature TA under ripple current operating conditions Frequency factor of permissible ripple current IAC versus frequency f Frequency characteristics of ESR Typical behavior 1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life. Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 20 B43515, B43525 Compact  105 °C Impedance Z versus frequency f Typical behavior at 20 °C Please read Cautions and warnings and Important notes at the end of this document. Page 14 of 20 B43515, B43525 Compact  105 °C Cautions and warnings Personal safety The electrolytes used by EPCOS have been optimized both with a view to the intended application and with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide (DMAC). Furthermore, some of the high-voltage electrolytes used by EPCOS are self-extinguishing. As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no alternative materials are currently known. However, the amount of dangerous materials used in our products is limited to an absolute minimum. Materials and chemicals used in EPCOS aluminum electrolytic capacitors are continuously adapted in compliance with the EPCOS Corporate Environmental Policy and the latest EU regulations and guidelines such as RoHS, REACH/SVHC, GADSL, and ELV. MDS (Material Data Sheets) are available on the EPCOS website for all types listed in the data book. MDS for customer specific capacitors are available upon request. MSDS (Material Safety Data Sheets) are available for all of our electrolytes upon request. Nevertheless, the following rules should be observed when handling aluminum electrolytic capacitors: No electrolyte should come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected areas immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid inhaling electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water. Please read Cautions and warnings and Important notes at the end of this document. Page 15 of 20 B43515, B43525 Compact  105 °C Product safety The table below summarizes the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of chapter "General technical information". Topic Safety information Polarity Make sure that polar capacitors are connected with the right polarity. Reverse voltage Voltages polarity classes should be prevented by connecting a diode. Do not mount the capacitor with the terminals (safety vent) upside down. Mounting position of screwterminal capacitors Robustness of terminals Mounting of single-ended capacitors Soldering Soldering, cleaning agents Upper category temperature Passive flammability The following maximum tightening torques must not be exceeded when connecting screw terminals: M5: 2.5 Nm M6: 4.0 Nm The internal structure of single-ended capacitors might be damaged if excessive force is applied to the lead wires. Avoid any compressive, tensile or flexural stress. Do not move the capacitor after soldering to PC board. Do not pick up the PC board by the soldered capacitor. Do not insert the capacitor on the PC board with a hole space different to the lead space specified. Do not exceed the specified time or temperature limits during soldering. Do not allow halogenated hydrocarbons to come into contact with aluminum electrolytic capacitors. Do not exceed the upper category temperature. Avoid external energy, such as fire or electricity. Please read Cautions and warnings and Important notes at the end of this document. Page 16 of 20 Reference chapter "General technical information" 1 "Basic construction of aluminum electrolytic capacitors" 3.1.6 "Reverse voltage" 11.1. "Mounting positions of capacitors with screw terminals" 11.3 "Mounting torques" 11.4 "Mounting considerations for single-ended capacitors" 11.5 "Soldering" 11.6 "Cleaning agents" 7.2 "Maximum permissible operating temperature" 8.1 "Passive flammability" B43515, B43525 Compact  105 °C Topic Safety information Active flammability Maintenance Avoid overload of the capacitors. Storage Make periodic inspections of the capacitors. Before the inspection, make sure that the power supply is turned off and carefully discharge the electricity of the capacitors. Do not apply any mechanical stress to the capacitor terminals. Do not store capacitors at high temperatures or high humidity. Capacitors should be stored at +5 to +35 °C and a relative humidity of ≤ 75%. Breakdown strength Do not damage the insulating sleeve, especially of insulating when ring clips are used for mounting. sleeves Please read Cautions and warnings and Important notes at the end of this document. Page 17 of 20 Reference chapter "General technical information" 8.2 "Active flammability" 10 "Maintenance" 7.3 Storage conditions Reference chapter "Capacitors with screw terminals" "Screw terminals  accessories" B43515, B43525 Compact  105 °C Symbols and terms Symbol English German C CR CS CS,T Cf d dmax ESL ESR ESRf Capacitance Rated capacitance Series capacitance Series capacitance at temperature T Capacitance at frequency f Case diameter, nominal dimension Maximum case diameter Self-inductance Equivalent series resistance Equivalent series resistance at frequency f Equivalent series resistance at temperature T Frequency Current Alternating current (ripple current) Root-mean-square value of alternating current Ripple current at frequency f Maximum permissible ripple current Rated ripple current Rated ripple current for base cooling Leakage current Operating leakage current Case length, nominal dimension Maximum case length (without terminals and mounting stud) Resistance Insulation resistance Balancing resistance Temperature Temperature difference Ambient temperature Case temperature Capacitor base temperature Time Period Service life (operating hours) Kapazität Nennkapazität Serienkapazität Serienkapazität bei Temperatur T Kapazität bei Frequenz f Gehäusedurchmesser, Nennmaß Maximaler Gehäusedurchmesser Eigeninduktivität Ersatzserienwiderstand Ersatzserienwiderstand bei Frequenz f ESRT f I IAC IAC,rms IAC,f IAC,max IAC,R IAC,R (B) Ileak Ileak,op l lmax R Rins Rsymm T ∆T TA TC TB t ∆t tb Please read Cautions and warnings and Important notes at the end of this document. Ersatzserienwiderstand bei Temperatur T Frequenz Strom Wechselstrom Wechselstrom, Effektivwert Wechselstrom bei Frequenz f Maximal zulässiger Wechselstrom Nennwechselstrom Nennwechselstromstrom für Bodenkühlung Reststrom Betriebsreststrom Gehäuselänge, Nennmaß Maximale Gehäuselänge (ohne Anschlüsse und Gewindebolzen) Widerstand Isolationswiderstand Symmetrierwiderstand Temperatur Temperaturdifferenz Umgebungstemperatur Gehäusetemperatur Temperatur des Becherbodens Zeit Zeitraum Brauchbarkeitsdauer (Betriebszeit) Page 18 of 20 B43515, B43525 Compact  105 °C Symbol V VF Vop VR VS XC XL Z ZT tan δ λ ε0 εr ω English Voltage Forming voltage Operating voltage Rated voltage, DC voltage Surge voltage Capacitive reactance Inductive reactance Impedance Impedance at temperature T Dissipation factor Failure rate Absolute permittivity Relative permittivity Angular velocity; 2  π  f German Spannung Formierspannung Betriebsspannung Nennspannung, Gleichspannung Spitzenspannung Kapazitiver Blindwiderstand Induktiver Blindwiderstand Scheinwiderstand Scheinwiderstand bei Temperatur T Verlustfaktor Ausfallrate Elektrische Feldkonstante Dielektrizitätszahl Kreisfrequenz; 2  π  f Note All dimensions are given in mm. Please read Cautions and warnings and Important notes at the end of this document. Page 19 of 20 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. Page 20 of 20