B43705B4338M000

Aluminum electrolytic capacitors Capacitors with screw terminals Series/Type: B43705, B43725 Date: December 2019 © TDK Electronics AG 2019. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without TDK Electronics' prior express consent is prohibited. Capacitors with screw terminals B43705, B43725 Outstanding ripple current  85 °C Long-life grade capacitors Applications Frequency converters Wind power converters Solar inverters Professional power supplies Uninterruptible power supplies Features Outstanding ripple current capability High reliability All-welded construction ensures reliable electrical contact PAPR terminals available (Protection Against Polarity Reversal) Version available with an optimized base cooling design (heat sink mounting) and featuring up to 2 times the ripple current capability Version with low-inductance design available RoHS-compatible Construction Charge-discharge proof, polar Aluminum case, insulated with PET sleeve Version with PVC insulation available upon request Poles with screw terminal connections Mounting with ring clips, clamps or threaded stud Types with threaded stud are available with or without insulated base Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 30 B43705 B43725 B43705, B43725 Outstanding ripple current  85 °C Specifications and characteristics in brief Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance 350 ... 450 V DC 1.10  VR 1000 ... 18000 μF ±20%  M Dissipation factor tan δ (20 °C, 120 Hz) ≤ 0.20 Leakage current Ileak (20 °C, 5 min) Self-inductance ESL d = 51.6 mm: approx. 15 nH d ≥ 64.3 mm: approx. 20 nH Capacitors with low-inductance design: d ≥ 64.3 mm: approx. 13 nH Useful life1) 85 °C; VR; IAC,R Requirements: > 12000 h ΔC/C ≤ 15% of initial value tan δ ≤ 1.75 times initial specified limit Ileak ≤ initial specified limit Voltage endurance test Post test requirements: 85 °C; VR 2000 h ΔC/C ≤ 10% of initial value tan δ ≤ 1.3 times initial specified limit Ileak ≤ initial specified limit Vibration resistance test To IEC 60068-2-6, test Fc: Frequency range 10 ... 55 Hz, displacement amplitude 0.75 mm, acceleration max. 10 g, duration 3 × 2 h. Capacitor mounted by its body which is rigidly clamped to the work surface. Characteristics at low temperature Max. impedance ratio at 100 Hz VR Z -25°C / Z 20°C Z -40°C / Z 20°C ≤ 400 V 2 4 450 V 3 10 IEC climatic category To IEC 60068-1: 40/085/56 (40 °C/+85 °C/56 days damp heat test) Sectional specification IEC 60384-4 1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life. Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 30 B43705, B43725 Outstanding ripple current  85 °C Ripple current capability Due to the ripple current capability of the capacitor contact elements, the following current upper limits must not be exceeded in case of the absence of any forced cooling around the capacitor and its contact elements: Capacitor diameter 51.6 mm 64.3 mm 76.9 mm 90 mm IAC,max 55 A 71 A 100 A 100 A In the event of the availability of cooling (e.g. forced air around the capacitor body, forced air around the contact elements, capacitor base cooling by a heat sink) however above limits may be exceeded depending on the cooling conditions. For details please contact our sales offices. Dimensional drawings B43705 Ring clip/clamp mounting B43725 Threaded stud mounting Positive pole marking: + For standard types with threaded stud the base is not insulated. Also refer to the mounting instructions in chapter "Capacitors with screw terminals  accessories" on page 17. Screw terminals with UNF threads are available upon request. For information regarding dimensions and weights, packing, special designs and design options, refer to chapter "Capacitors with screw terminals  general information" on page 10. Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 30 B43705, B43725 Outstanding ripple current  85 °C Overview of available types The capacitance and voltage ratings listed below are available in different case sizes upon request. Other voltage and capacitance ratings are also available upon request. VR (V DC) 350 400 450 Case dimensions d × l (mm) CR (μF) 1000 51.6 × 80.7 1200 51.6 × 96.7 1500 51.6 × 80.7 51.6 × 105.7 1800 51.6 × 80.7 51.6 × 96.7 51.6 × 118.2 64.3 × 80.7 2200 51.6 × 96.7 51.6 × 105.7 64.3 × 80.7 51.6 × 130.7 64.3 × 105.7 2700 51.6 × 105.7 51.6 × 118.2 64.3 × 96.7 64.3 × 105.7 76.9 × 96.7 3300 51.6 × 118.2 64.3 × 80.7 64.3 × 105.7 64.3 × 130.7 76.9 × 105.7 3900 51.6 × 130.7 64.3 × 96.7 64.3 × 118.2 76.9 × 96.7 64.3 × 143.2 4700 64.3 × 105.7 64.3 × 130.7 76.9 × 105.7 76.9 × 118.2 5600 64.3 × 118.2 76.9 × 105.7 64.3 × 143.2 76.9 × 118.2 76.9 × 143.2 90.0 × 120.0 6800 64.3 × 143.2 76.9 × 118.2 76.9 × 143.2 90.0 × 120.0 76.9 × 168.7 90.0 × 144.5 8200 76.9 × 143.2 90.0 × 120.0 76.9 × 168.7 76.9 × 220.7 90.0 × 170.0 10000 76.9 × 143.2 90.0 × 120.0 76.9 × 190.7 90.0 × 144.5 90.0 × 197.0 12000 76.9 × 190.7 90.0 × 144.5 76.9 × 220.7 90.0 × 170.0 90.0 × 221.0 15000 76.9 × 220.7 90.0 × 197.0 90.0 × 221.0 18000 90.0 × 221.0 Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 30 B43705, B43725 Outstanding ripple current  85 °C Technical data and ordering codes CR 100 Hz 20 °C μF Case dimensions d×l mm VR = 350 V DC 51.6 × 80.7 1800 51.6 × 96.7 2200 51.6 × 105.7 2700 51.6 × 118.2 3300 64.3 × 80.7 3300 51.6 × 130.7 3900 64.3 × 96.7 3900 64.3 × 105.7 4700 64.3 × 118.2 5600 76.9 × 105.7 5600 6800 64.3 × 143.2 76.9 × 118.2 6800 76.9 × 143.2 8200 90.0 × 120.0 8200 76.9 × 143.2 10000 90.0 × 120.0 10000 76.9 × 190.7 12000 12000 90.0 × 144.5 76.9 × 220.7 15000 90.0 × 197.0 15000 90.0 × 221.0 18000 ESRtyp 100 Hz 20 °C mΩ 40 32 28 22 22 19 19 16 14 13 11 11 9.0 9.2 7.5 7.7 6.2 6.4 5.0 5.1 4.3 ESRtyp 300 Hz 60 °C mΩ Zmax 10 kHz 20 °C mΩ 12 10 8.4 7.0 7.5 6.1 6.3 5.4 4.6 4.2 3.9 3.5 2.9 3.1 2.5 2.8 2.1 2.3 1.8 1.8 1.6 60 50 38 32 32 28 28 24 19 18 16 15 13 13 11 12 9.2 9.6 7.8 8.0 7.0 Composition of ordering code * = Mounting style 0 = for capacitors with ring clip/clamp mounting 2 = for capacitors with threaded stud Please read Cautions and warnings and Important notes at the end of this document. IAC,max 100 Hz 60 °C A IAC,R 100 Hz 85 °C A Ordering code (composition see below) 15.3 17.4 20.0 23.1 22.9 26.1 25.6 28.9 32.5 35.4 37.3 40.0 45.0 46.2 51.8 51.9 58.2 58.2 68.3 66.6 74.9 9.51 10.8 12.5 14.3 14.2 16.2 15.9 17.9 20.2 22.0 23.2 24.8 28.0 29.6 32.1 33.2 37.3 37.3 43.8 42.8 48.1 B437*5A4188M6## B437*5A4228M6## B437*5A4278M6## B437*5A4338M6## B437*5B4338M6## B437*5A4398M6## B437*5B4398M6## B437*5A4478M6## B437*5A4568M6## B437*5B4568M6## B437*5A4688M6## B437*5B4688M6## B437*5A4828M6## B437*5B4828M6## B437*5A4109M6## B437*5B4109M6## B437*5A4129M6## B437*5B4129M6## B437*5A4159M6## B437*5B4159M6## B437*5A4189M6## ## = Design 00 = standard 03 = low inductance (13 nH) 07 = heat sink mounting 08 = insulated base 50 = PAPR terminal style 57 = PAPR with heat sink mounting 58 = PAPR with insulated base For details refer to "Design options" on page 13. Page 6 of 30 B43705, B43725 Outstanding ripple current  85 °C Technical data and ordering codes CR 100 Hz 20 °C μF Case dimensions d×l mm VR = 400 V DC 51.6 × 80.7 1500 51.6 × 96.7 1800 51.6 × 105.7 2200 64.3 × 80.7 2200 51.6 × 118.2 2700 64.3 × 96.7 2700 64.3 × 105.7 3300 64.3 × 118.2 3900 76.9 × 96.7 3900 64.3 × 130.7 4700 4700 76.9 × 105.7 64.3 × 143.2 5600 76.9 × 118.2 5600 76.9 × 143.2 6800 90.0 × 120.0 6800 76.9 × 168.7 8200 76.9 × 190.7 10000 10000 90.0 × 144.5 76.9 × 220.7 12000 90.0 × 170.0 12000 90.0 × 221.0 15000 ESRtyp 100 Hz 20 °C mΩ 45 38 32 32 26 26 22 18 18 15 15 13 12 10 12 9.9 8.2 8.4 6.9 7.0 5.6 ESRtyp 300 Hz 60 °C mΩ Zmax 10 kHz 20 °C mΩ 14 12 9.7 9.9 8.0 8.1 6.8 5.8 5.5 5.0 4.6 4.3 4.0 3.3 3.9 3.1 2.6 2.8 2.2 2.4 1.9 65 55 45 45 36 36 30 26 24 22 20 18 17 14 18 15 13 13 11 11 9.0 Composition of ordering code * = Mounting style 0 = for capacitors with ring clip/clamp mounting 2 = for capacitors with threaded stud Please read Cautions and warnings and Important notes at the end of this document. IAC,max 100 Hz 60 °C A IAC,R 100 Hz 85 °C A Ordering code (composition see below) 14.2 16.0 18.4 18.7 21.2 21.2 24.2 27.0 29.4 30.7 33.1 34.7 37.0 41.8 42.6 46.9 54.0 54.1 61.6 60.7 69.9 8.83 9.98 11.4 11.6 13.2 13.2 15.0 16.8 18.3 19.1 20.5 21.5 23.0 26.0 27.3 30.1 34.6 34.7 39.5 38.9 44.9 B437*5A9158M6## B437*5A9188M6## B437*5A9228M6## B437*5B9228M6## B437*5A9278M6## B437*5B9278M6## B437*5A9338M6## B437*5A9398M6## B437*5B9398M6## B437*5A9478M6## B437*5B9478M6## B437*5A9568M6## B437*5B9568M6## B437*5A9688M6## B437*5B9688M6## B437*5A9828M6## B437*5A9109M6## B437*5B9109M6## B437*5A9129M6## B437*5B9129M6## B437*5A9159M6## ## = Design 00 = standard 03 = low inductance (13 nH) 07 = heat sink mounting 08 = insulated base 50 = PAPR terminal style 57 = PAPR with heat sink mounting 58 = PAPR with insulated base For details refer to "Design options" on page 13. Page 7 of 30 B43705, B43725 Outstanding ripple current  85 °C Technical data and ordering codes CR 100 Hz 20 °C μF Case dimensions d×l mm VR = 450 V DC 51.6 × 80.7 1000 51.6 × 96.7 1200 51.6 × 105.7 1500 51.6 × 118.2 1800 64.3 × 80.7 1800 51.6 × 130.7 2200 64.3 × 105.7 2200 64.3 × 105.7 2700 76.9 × 96.7 2700 64.3 × 130.7 3300 3300 76.9 × 105.7 64.3 × 143.2 3900 76.9 × 118.2 4700 76.9 × 143.2 5600 90.0 × 120.0 5600 76.9 × 168.7 6800 90.0 × 144.5 6800 8200 76.9 × 220.7 90.0 × 170.0 8200 90.0 × 197.0 10000 90.0 × 221.0 12000 ESRtyp 100 Hz 20 °C mΩ ESRtyp 300 Hz 60 °C mΩ Zmax 10 kHz 20 °C mΩ IAC,max 100 Hz 60 °C A IAC,R 100 Hz 85 °C A Ordering code (composition see below) 110 90 75 60 60 50 50 40 40 34 34 28 24 20 20 14 17 12 12 10 8.4 28 24 19 16 16 13 13 11 11 9.0 8.7 7.8 6.3 5.3 5.5 4.0 4.6 3.3 3.5 2.9 2.5 180 150 120 100 100 80 80 65 65 55 55 45 38 32 32 22 28 19 19 16 14 10.9 12.3 14.3 16.3 16.5 18.9 18.8 21.6 23.4 24.7 26.5 27.8 33.6 37.7 38.6 44.7 43.4 50.5 50.4 57.5 65.4 6.69 7.54 8.78 9.98 10.0 11.5 11.4 13.1 14.2 15.0 16.1 16.9 20.4 22.9 24.2 28.0 27.3 31.7 31.7 36.2 41.1 B437*5A5108M6## B437*5A5128M6## B437*5A5158M6## B437*5A5188M6## B437*5B5188M6## B437*5A5228M6## B437*5B5228M6## B437*5A5278M6## B437*5B5278M6## B437*5A5338M6## B437*5B5338M6## B437*5A5398M6## B437*5A5478M6## B437*5A5568M6## B437*5B5568M6## B437*5A5688M6## B437*5B5688M6## B437*5A5828M6## B437*5B5828M6## B437*5A5109M6## B437*5A5129M6## Composition of ordering code * = Mounting style 0 = for capacitors with ring clip/clamp mounting 2 = for capacitors with threaded stud Please read Cautions and warnings and Important notes at the end of this document. ## = Design 00 = standard 03 = low inductance (13 nH) 07 = heat sink mounting 08 = insulated base 50 = PAPR terminal style 57 = PAPR with heat sink mounting 58 = PAPR with insulated base For details refer to "Design options" on page 13. Page 8 of 30 B43705, B43725 Outstanding ripple current  85 °C Useful life1) For useful life calculations, please use our web-based "AlCap Useful Life Calculation Tool", which can be found on the Internet under the following link: www.tdk-electronics.tdk.com/alcap The AlCap Useful Life Calculation Tool provides calculations of useful life as well as additional data for selected capacitor types under operating conditions defined by the user. In addition, it is possible to calculate useful life expectancies based on temperatures measured by the user in the application. Frequency characteristics of ESR Typical behavior Impedance Z versus frequency f Typical behavior at 20 °C 1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life. Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 30 B43705, B43725 Outstanding ripple current  85 °C Capacitors with screw terminals  general information 1 Dimensional drawings Ring clip/clamp mounting Threaded stud mounting Positive pole marking: + For standard types with threaded stud the base is not insulated. Also refer to the mounting instructions in chapter "Capacitors with screw terminals  accessories" on page 17. Screw terminals with UNF threads are available upon request. 2 Dimensions and weights (Standard capacitors, without heat sink, M600) 2.1 Capacitors with screw terminals series B43701, B43721 Terminal M5 M5 M5 M5 M5 M5 M5 M5 M5 M5 M5 M5 M5 M5 M5 M5 M5 Dimensions (mm) with insulating sleeve d l ±1 l1 ±1 l2 +0/1 51.6 +0.5/1 80.7 87.2 17 51.6 +0.5/1 96.7 103.2 17 51.6 +0.5/1 105.7 112.2 17 51.6 +0.5/1 118.2 124.7 17 51.6 +0.5/1 130.7 137.2 17 64.3 +0.5/1 80.7 87.2 17 64.3 +0.5/1 96.7 103.2 17 64.3 +0.5/1 105.7 112.2 17 64.3 +0.5/1 118.2 124.7 17 64.3 +0.5/1 130.7 137.2 17 64.3 +0.5/1 143.2 149.7 17 76.9 +0.5/1 96.7 103.2 17 76.9 +0.5/1 105.7 112.2 17 76.9 +0.5/1 130.7 137.2 17 76.9 +0.5/1 156.2 162.7 17 76.9 +0.5/1 168.7 175.2 17 76.9 +0.5/1 190.7 197.2 17 d1 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 Min. reach of screw = 9.5 mm Tolerances of terminal thread respectively stud thread:  Terminal thread M5: 6H  Stud thread M12: 6g Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 30 d2 max. 10.2 10.2 10.2 10.2 10.2 13.2 13.2 13.2 13.2 13.2 13.2 13.2 13.2 13.2 13.2 13.2 13.2 a +0.2/0.4 22.2 22.2 22.2 22.2 22.2 28.5 28.5 28.5 28.5 28.5 28.5 31.7 31.7 31.7 31.7 31.7 31.7 Approx. weight (g) 220 250 280 320 350 370 400 440 510 600 630 570 620 800 920 1000 1150 B43705, B43725 Outstanding ripple current  85 °C 2.2 Capacitors with screw terminals series Terminal Dimensions (mm) with insulating sleeve d l ±1 l1 ±1 l2 +0/1 d1 d2 max. a +0.2/0.4 M5 M5 M5 M5 M5 51.6 +0.5/1 51.6 +0.5/1 51.6 +0.5/1 51.6 +0.5/1 51.6 +0.5/1 80.7 96.7 105.7 118.2 130.7 87.2 103.2 112.2 124.7 137.2 17 17 17 17 17 M12 M12 M12 M12 M12 10.2 10.2 10.2 10.2 10.2 22.2 22.2 22.2 22.2 22.2 220 250 280 320 350 M5 M5 M5 M5 M5 M5 64.3 +0.5/1 64.3 +0.5/1 64.3 +0.5/1 64.3 +0.5/1 64.3 +0.5/1 64.3 +0.5/1 80.7 96.7 105.7 118.2 130.7 143.2 87.2 103.2 112.2 124.7 137.2 149.7 17 17 17 17 17 17 M12 M12 M12 M12 M12 M12 13.2 13.2 13.2 13.2 13.2 13.2 28.5 28.5 28.5 28.5 28.5 28.5 370 400 440 510 600 630 M6 M6 M6 M6 M6 M6 M6 M6 M6 76.9 +0.5/1 76.9 +0.5/1 76.9 +0.5/1 76.9 +0.5/1 76.9 +0.5/1 76.9 +0.5/1 76.9 +0.5/1 76.9 +0.5/1 76.9 +0.5/1 96.7 105.7 118.2 130.7 143.2 156.2 168.7 190.7 220.7 102.5 111.5 124.0 136.5 149.0 162.0 174.5 196.5 226.5 17 17 17 17 17 17 17 17 17 M12 M12 M12 M12 M12 M12 M12 M12 M12 17.7 17.7 17.7 17.7 17.7 17.7 17.7 17.7 17.7 31.7 31.7 31.7 31.7 31.7 31.7 31.7 31.7 31.7 570 620 700 800 840 920 1000 1150 1300 M6 M6 M6 M6 M6 M6 M6 90.0 +0.5/1.5 90.0 +0.5/1.5 90.0 +0.5/1.5 90.0 +0.5/1.5 90.0 +0.5/1.5 90.0 +0.5/1.5 90.0 +0.5/1.5 97.0 120.0 144.5 170.0 191.0 197.0 221.0 102.3 125.3 149.8 175.3 196.3 202.3 226.3 17 17 17 17 17 17 17 M12 M12 M12 M12 M12 M12 M12 17.7 17.7 17.7 17.7 17.7 17.7 17.7 31.7 31.7 31.7 31.7 31.7 31.7 31.7 770 1000 1200 1400 1650 1700 1900 For low-inductance design the following deviation applies: d = 64.3 mm: l1 0.7 mm d = 90.0 mm: l1 1.7 mm M5: Min. reach of screw = 9.5 mm 9 mm for low inductance design M6: Min. reach of screw = 12.0 mm 9.5 mm for low inductance design Tolerances of terminal thread respectively stud thread:  Terminal thread M5 and M6: 6H  Stud thread M12: 6g Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 30 Approx. weight (g) B43705, B43725 Outstanding ripple current  85 °C 3 Accessories All accessories for connecting (screws M5 and M6) as well as for mounting the capacitors must be ordered separately. For details refer to chapter "Capacitors with screw terminals  accessories" on page 17. Item Type Screws M5 and M6 B44020 Ring clips B44030 Clamps for capacitors with d ≥ 64.3 mm B44030 Insulating parts B44020 4 Packing Capacitor diameter d (mm) 51.6 64.3 76.9 90.0 Length l (mm) all all ≤168.7 >168.7 all For ecological reasons the packing is pure cardboard. Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 30 Packing units (pcs.) 36 25 16 12 9 B43705, B43725 Outstanding ripple current  85 °C 5 Special designs 5.1 Design options Design options Identification in third Remark block of ordering code Standard M600 Standard version without threaded stud: fully insulated with PET Standard version with threaded stud: insulated with PET sleeve, base not insulated Low inductance (13 nH) M603 For capacitors with diameter d ≥ 64.3 mm Heat sink mounting M607 For capacitors with diameter d ≥ 64.3 mm and without threaded stud Insulated base M608 For capacitors with threaded stud, fully insulated with PET sleeve and PP disk PAPR terminal style M650 Not for low inductance PAPR with heat sink mounting M657 For capacitors with diameter d ≥ 64.3 mm and without threaded stud, not for low inductance PAPR with insulated base M658 For capacitors with threaded stud, fully insulated with PET sleeve and PP disk, not for low inductance Version with low inductance (13 nH) in combination with insulated base (threaded stud) available upon request. Please note that there are design options which might not be available for each series. For further information refer to series data sheets. 5.2 Low-inductance design (M603) Low-inductance aluminum electrolytic capacitors offer numerous advantages for frequency converter design: Voltage peaks caused by steep-edged pulses are significantly reduced. Power semiconductors of a lower voltage class can be used. Capacitor banks require fewer capacitors, which reduces the cost, weight and space requirements of frequency converters accordingly. The low inductance of the aluminum electrolytic capacitor with screw terminals is the result of various design improvements. Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 30 B43705, B43725 Outstanding ripple current  85 °C Many of the data book types with diameter ≥ 64.3 mm can be ordered in low-inductance design with inductance approx. L = 13 nH. For low-inductance design the following deviation regarding case dimensions applies: d = 64.3 mm: l1 0.7 mm d = 90.0 mm: l1 1.7 mm M5: Min. reach of screw = 9.0 mm M6: Min. reach of screw = 9.5 mm 5.3 Capacitors with heat sink mounting (M607, M657) As a large amount of heat is dissipated through the base of the case, the use of a heat sink connected to the capacitor base is the most efficient cooling method. For heat-sink mounting we offer a special optimized version of high-voltage capacitors with screw terminals in order to ensure an optimal heat transfer between the base of the case and the heat sink. The special design comprises: Two thermal pads at the base. The first one (thickness 0.5 mm) closes the air gap at the base in the area which is not covered by the insulating sleeve and the second one (thickness 0.2 mm) ensures the electrical insulation of the case. Minimized tolerance (±0.35 mm) of the overall length l1 of the capacitor to avoid unwanted mechanical forces on the terminals particularly when several capacitors are mounted between heat sink and bus bar. Case with extra groove near the base for ring clamp mounting (recommended accessory B44030A0165-A0190B). The clamp ensures an optimal pressing of the case to the heat sink. Most of the high-voltage data book types without threaded stud and for diameters ≥ 64.3 mm can be ordered in heat-sink mounting design. Please refer to chapter "General technical information, 5.2.2 Base cooling with heat sink". Regarding ripple current and useful life, please refer to chapter "General technical information, 5 Useful life". Please read Cautions and warnings and Important notes at the end of this document. Page 14 of 30 B43705, B43725 Outstanding ripple current  85 °C Dimensions and weights for heat sink mounting: Terminal M5 M5 M5 M6 M6 M6 M6 M6 M6 Dimensions (mm) with insulating sleeve d l ±1 l1 ±0.35 d2 max. 64.3 +0.5/1 80.7 86.3 13.2 64.3 +0.5/1 96.7 102.3 13.2 64.3 +0.5/1 105.7 111.3 13.2 76.9 +0.5/1 96.7 101.6 17.7 76.9 +0.5/1 105.7 110.6 17.7 76.9 +0.5/1 118.2 123.1 17.7 90.0 +0.5/1.5 97.0 101.4 17.7 90.0 +0.5/1.5 120.0 124.4 17.7 90.0 +0.5/1.5 144.5 148.9 17.7 a +0.2/0.4 28.5 28.5 28.5 31.7 31.7 31.7 31.7 31.7 31.7 Approx. weight g 370 400 440 570 620 700 770 1000 1200 M5: Min. reach of screw = 7.5 mm M6: Min. reach of screw = 10.0 mm Tolerances of terminal thread M5 and M6: 6H Dimensions for other sizes are available upon request. 5.4 Insulated base (M608, M658) Length l and l1 increase by +0.5 mm for types with threaded stud and insulated base. All other dimensions of the capacitor are identical with those of standard capacitors. Please refer to the table "Dimensions and weights". Please read Cautions and warnings and Important notes at the end of this document. Page 15 of 30 B43705, B43725 Outstanding ripple current  85 °C 5.5 PAPR terminal style (M650, M657, M658) An aluminum electrolytic capacitor is a polar component that needs strictly to be mounted under correct polarity. With our PAPR terminal style (Protection Against Polarity Reversal) we offer an optional mechanical feature in addition to the visual polarity marking on the cover disk and the sleeve, which prevents from mounting in reverse polarity. The non-circular shape of the terminals and their arrangement perpendicular to each other enables the user to definitely prevent wrong mounting with respect to polarity (Poka Yoke). Dimensional drawing of PAPR terminal configuration: Dimensions for PAPR terminal style (mm): Capacitor diameter d 51.6 64.3 76.9 90.0 Terminal M5 M5 M6 M6 d3 ±0.1 10 13 13 13 d4 ±0.1 13 15 15 15 a +0.2/0.4 22.2 28.5 31.7 31.7 M5: Min. reach of screw = 9.5 mm M6: Min. reach of screw = 12.0 mm Tolerances of terminal thread M5 and M6: 6H All other dimensions of the capacitor such as diameter d, case length l and overall length l1 are identical with those of standard capacitors of this series. Please refer to the tables "Dimensions and weights" (standard types) on page 11 and "Dimensions and weights for heat sink mounting" (special designs) on page 15. Please read Cautions and warnings and Important notes at the end of this document. Page 16 of 30 B43705, B43725 Outstanding ripple current  85 °C Capacitors with screw terminals  accessories Basic accessories One packing unit contains accessories for 16 capacitors. For terminals Thread d2 Toothed d1 mm washers Screws Maximum torque Ordering code M5 5.3 A 5.1 DIN 6797 DIN 7985 / ISO 7045-M5 x 10-5.6-Z l = 10 mm 2.5 Nm B44020J0500B000 thread depth t ≥ 8 mm M6 6.4 A 6.4 DIN 6797 DIN 7985 / ISO 7045-M6 x 12-5.6-Z l = 12 mm 4.0 Nm B44020J0600B000 thread depth t ≥ 9.5 mm For threaded stud Thread For terminal Toothed washers M12 M5 J 12.5 DIN 6797 Hex nut BM 12 DIN 439 10 Nm B44020J0500B012 M12 M6 J 12.5 DIN 6797 Hex nut BM 12 DIN 439 10 Nm B44020J0600B012 Please read Cautions and warnings and Important notes at the end of this document. Nuts Page 17 of 30 Maximum Ordering code torque B43705, B43725 Outstanding ripple current  85 °C Additional accessories for capacitors with mounting stud on capacitor base Insulating washer made of hostalen Capacitor Thread diameter size 51.6 mm 64.2 mm Dimensional drawing Diameter d mm Ordering code M12 d1 0.5 = 51 d2 0.5 = 31 d3 ±0.3 = 21.5 d4 ±0.2 = 13 M12 d1 0.5 = 63.5 d2 0.5 = 43.5 B44020B0006B064 d3 ±0.3 = 21.5 d4 ±0.2 = 13 76.9 mm M12 90.0 mm M12 d1 0.5 = 76 d2 0.5 = 56 d3 ±0.3 = 21.5 d4 ±0.2 = 13 d1 0.5 = 89 d2 0.5 = 69 d3 ±0.3 = 21.5 d4 ±0.2 = 13 B44020B0006B051 B44020B0006B076 B44020B0006B090 Only for capacitors with threaded stud and without insulated base Reinforced nylon cap nut Capacitor Thread diameter size > 40 mm M121) width across flats 19 mm Dimensional drawing Ordering code B44020J0006B012 B44020J0007B012 1) Maximum torque M12: 7.0 Nm for mounting thread length ≥ 13 mm; 5.0 Nm for mounting thread length ≥ 10 mm Please read Cautions and warnings and Important notes at the end of this document. Page 18 of 30 B43705, B43725 Outstanding ripple current  85 °C Mounting instructions Insulated mounting with washer and cap nut (for capacitors with threaded stud and without insulated base): Mounting stud has the same potential as the negative terminal. Attention must be paid on any relevant regulations (e.g. VDE, BSA or UL). Ring clip mounting Ring clips are primarily used for upright mounting of screw terminal and photoflash capacitors. The ring clips are corrosion protected and are RoHS-compatible. It is recommended to insert an additional insulating strip between capacitor and ring clip to avoid any risk of damage due to edges from the clip. The strip is included in delivery. For ordering code, see the following table. Attention must be paid to any relevant regulations (e.g. VDE, BSA or UL). Please read Cautions and warnings and Important notes at the end of this document. Page 19 of 30 B43705, B43725 Outstanding ripple current  85 °C d h1 mm h2 Ring clip version Ordering code with insulating strip B44030J0051B000 51.6 22 15 (insulating strip length: 325 mm) B44030J0064B000 64.3 29 19 (insulating strip length: 420 mm) B44030J0075B000 76.9 29 19 Please read Cautions and warnings and Important notes at the end of this document. (insulating strip length: 495 mm) Page 20 of 30 B43705, B43725 Outstanding ripple current  85 °C d h1 mm h2 Ring clip version Ordering code with insulating strip B44030J0090B000 90.0 29 19 Please read Cautions and warnings and Important notes at the end of this document. (insulating strip length: 585 mm) Page 21 of 30 B43705, B43725 Outstanding ripple current  85 °C Clamp mounting Screw terminal capacitors without threaded stud and with a diameter ≥ 64.3 mm can also be mounted with ring clamps. Clamp mounting offers the following advantages: Optimum heat transfer between capacitor base and board due to pressure contact High vibration resistance Electrically insulated material Dimensional drawing 1) Length of screw depends on application. The screws have to be tightened uniformly and crosswise until the fixing part rests flatly on the board. 3) Tubular rivets included in delivery package. 2) General hints for mounting: If required, the four fixation parts can be cut out from the common carrier ring and mounted separately. Dimensions and ordering codes Capacitor diameter d mm d1 ±0.2 mm b mm Ordering code 64.3 87.0 104.0 B44030A0165B000 76.9 99.0 116.0 B44030A0175B000 90.0 112.0 130.0 B44030A0190B000 Screws are not included in the delivery package. Please read Cautions and warnings and Important notes at the end of this document. Page 22 of 30 B43705, B43725 Outstanding ripple current  85 °C Mounting set (ring clamps) Protects the capacitor against tilt and the terminals from mechanical stress Fits for different capacitor length Electrically insulated clamping material Dimensions and ordering codes Capacitor diameter d ∅min Ordering code 76.9 mm 84 mm B44030A0375B000 90.0 mm 96.5 mm B44030A0390B000 Dimensional drawing Please read Cautions and warnings and Important notes at the end of this document. Page 23 of 30 B43705, B43725 Outstanding ripple current  85 °C Cautions and warnings Personal safety The electrolytes used have been optimized both with a view to the intended application and with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide (DMAC). Furthermore, some of the high-voltage electrolytes used are self-extinguishing. As far as possible, we do not use any dangerous chemicals or compounds to produce operating electrolytes, although in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no alternative materials are currently known. We do, however, restrict the amount of dangerous materials used in our products to an absolute minimum. Materials and chemicals used in our aluminum electrolytic capacitors are continuously adapted in compliance with the TDK Electronics Corporate Environmental Policy and the latest EU regulations and guidelines such as RoHS, REACH/SVHC, GADSL, and ELV. MDS (Material Data Sheets) are available on our website for all types listed in the data book. MDS for customer specific capacitors are available upon request. MSDS (Material Safety Data Sheets) are available for our electrolytes upon request. Nevertheless, the following rules should be observed when handling aluminum electrolytic capacitors: No electrolyte should come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected areas immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid inhaling electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water. Please read Cautions and warnings and Important notes at the end of this document. Page 24 of 30 B43705, B43725 Outstanding ripple current  85 °C Product safety The table below summarizes the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of seperate file chapter "General technical information". Topic Polarity Reverse voltage Mounting position of screwterminal capacitors Robustness of terminals Mounting of single-ended capacitors Soldering Soldering, cleaning agents Upper category temperature Passive flammability Safety information Reference chapter "General technical information" Make sure that polar capacitors are connected 1 with the right polarity. "Basic construction of aluminum electrolytic capacitors" Voltages of opposite polarity should be prevented 3.1.6 by connecting a diode. "Reverse voltage" Screw terminal capacitors must not be mounted 11.1. with terminals facing down unless otherwise "Mounting positions of specified. capacitors with screw terminals" The following maximum tightening torques must 11.3 not be exceeded when connecting screw "Mounting torques" terminals: M5: 2.5 Nm M6: 4.0 Nm The internal structure of single-ended capacitors 11.4 might be damaged if excessive force is applied to "Mounting the lead wires. considerations for Avoid any compressive, tensile or flexural stress. single-ended capacitors" Do not move the capacitor after soldering to PC board. Do not pick up the PC board by the soldered capacitor. Do not insert the capacitor on the PC board with a hole space different to the lead space specified. Do not exceed the specified time or temperature 11.5 limits during soldering. "Soldering" Do not allow halogenated hydrocarbons to come 11.6 into contact with aluminum electrolytic capacitors. "Cleaning agents" Do not exceed the upper category temperature. 7.2 "Maximum permissible operating temperature" Avoid external energy, e.g. fire. 8.1 "Passive flammability" Please read Cautions and warnings and Important notes at the end of this document. Page 25 of 30 B43705, B43725 Outstanding ripple current  85 °C Topic Safety information Active flammability Maintenance Avoid overload of the capacitors. Storage Make periodic inspections of the capacitors. Before the inspection, make sure that the power supply is turned off and carefully discharge the capacitors. Do not apply excessive mechanical stress to the capacitor terminals when mounting. Do not store capacitors at high temperatures or high humidity. Capacitors should be stored at +5 to +35 °C and a relative humidity of ≤ 75%. Breakdown strength Do not damage the insulating sleeve, especially of insulating when ring clips are used for mounting. sleeves Reference chapter "General technical information" 8.2 "Active flammability" 10 "Maintenance" 7.3 "Shelf life and storage conditions" Reference chapter "Capacitors with screw terminals" "Screw terminals  accessories" Display of ordering codes for TDK Electronics products The ordering code for one and the same product can be represented differently in data sheets, data books, other publications, on the company website, or in order-related documents such as shipping notes, order confirmations and product labels. The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products. Detailed information can be found on the Internet under www.tdk-electronics.tdk.com/orderingcodes. Please read Cautions and warnings and Important notes at the end of this document. Page 26 of 30 B43705, B43725 Outstanding ripple current  85 °C Symbols and terms Symbol English German C CR CS CS,T Cf d dmax ESL ESR ESRf Capacitance Rated capacitance Series capacitance Series capacitance at temperature T Capacitance at frequency f Case diameter, nominal dimension Maximum case diameter Self-inductance Equivalent series resistance Equivalent series resistance at frequency f Equivalent series resistance at temperature T Frequency Current Alternating current (ripple current) Root-mean-square value of alternating current Ripple current at frequency f Maximum permissible ripple current Rated ripple current Leakage current Operating leakage current Case length, nominal dimension Maximum case length (without terminals and mounting stud) Resistance Insulation resistance Balancing resistance Temperature Temperature difference Ambient temperature Case temperature Capacitor base temperature Time Period Service life (operating hours) Kapazität Nennkapazität Serienkapazität Serienkapazität bei Temperatur T Kapazität bei Frequenz f Gehäusedurchmesser, Nennmaß Maximaler Gehäusedurchmesser Eigeninduktivität Ersatzserienwiderstand Ersatzserienwiderstand bei Frequenz f ESRT f I IAC IAC,RMS IAC,f IAC,max IAC,R Ileak Ileak,op l lmax R Rins Rsymm T ΔT TA TC TB t Δt tb Please read Cautions and warnings and Important notes at the end of this document. Ersatzserienwiderstand bei Temperatur T Frequenz Strom Wechselstrom Wechselstrom, Effektivwert Wechselstrom bei Frequenz f Maximal zulässiger Wechselstrom Nennwechselstrom Reststrom Betriebsreststrom Gehäuselänge, Nennmaß Maximale Gehäuselänge (ohne Anschlüsse und Gewindebolzen) Widerstand Isolationswiderstand Symmetrierwiderstand Temperatur Temperaturdifferenz Umgebungstemperatur Gehäusetemperatur Temperatur des Gehäusebodens Zeit Zeitraum Brauchbarkeitsdauer (Betriebszeit) Page 27 of 30 B43705, B43725 Outstanding ripple current  85 °C Symbol V VF Vop VR VS XC XL Z ZT tan δ λ ε0 εr ω English Voltage Forming voltage Operating voltage Rated voltage, DC voltage Surge voltage Capacitive reactance Inductive reactance Impedance Impedance at temperature T Dissipation factor Failure rate Absolute permittivity Relative permittivity Angular velocity; 2  π  f German Spannung Formierspannung Betriebsspannung Nennspannung, Gleichspannung Spitzenspannung Kapazitiver Blindwiderstand Induktiver Blindwiderstand Scheinwiderstand Scheinwiderstand bei Temperatur T Verlustfaktor Ausfallrate Elektrische Feldkonstante Dielektrizitätszahl Kreisfrequenz; 2  π  f Note All dimensions are given in mm. Please read Cautions and warnings and Important notes at the end of this document. Page 28 of 30 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, we are either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether a product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.tdk-electronics.tdk.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to our General Terms and Conditions of Supply. Page 29 of 30 Important notes 7. Our manufacturing sites serving the automotive business apply the IATF 16949 standard. The IATF certifications confirm our compliance with requirements regarding the quality management system in the automotive industry. Referring to customer requirements and customer specific requirements (“CSR”) TDK always has and will continue to have the policy of respecting individual agreements. Even if IATF 16949 may appear to support the acceptance of unilateral requirements, we hereby like to emphasize that only requirements mutually agreed upon can and will be implemented in our Quality Management System. For clarification purposes we like to point out that obligations from IATF 16949 shall only become legally binding if individually agreed upon. 8. The trade names EPCOS, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CTVS, DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PowerHap, PQSine, PQvar, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.tdk-electronics.tdk.com/trademarks. Release 2018-10 Page 30 of 30