B59850C0120A051

PTC Thermistors Taping and packing Date: January 2016 © EPCOS AG 2016. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. Taping and packing Many of the components presented in this data book are suitable for processing on automatic insertion or placement machines. These thermistors can be supplied on tape for easy handling by automatic systems. The individual modes of taping and packing will be described in the following. 1 Taping of SMD thermistors 1.1 Blister tape (to IEC 60286-3) Dimension 8-mm tape (mm) D0 1.50 D1 0.3 P0 4.00 P2 2.00 P1 4.00 W 8.00 E 1.75 F 3.50 G 0.75 T 0.60 16-mm tape 1.50 1.50 4.00 2.00 12.00 16.00 1.75 7.50 0.75 0.60 Tolerance (mm) + 0.10/0 min. ± 0.10 1) ± 0.05 ± 0.10 ± 0.30 ± 0.10 ± 0.05 min. max. 24-mm tape 1.50 1.50 4.00 2.00 16.00 24.00 1.75 11.50 0.75 0.60 Tolerance (mm) + 0.10 + 0.10 ± 0.10 ± 0.10 ± 0.10 + 0.30/0.1 ± 0.10 ± 0.10 min. max. A0 x B0, K0, T2: The rated dimensions of the component compartment have been derived from the relevant component specification and are chosen such that the components cannot change their orientation within the tape. 1) ≤ 0.2 mm over 10 sprocket holes Please read Important notes and Cautions and warnings. Page 2 of 10 Taping and packing Part orientation in tape pocket for blister tape For chip thermistors case sizes 0805 and 1210 Additional taping information For chip thermistors case sizes 0805 and 1210 Reel material Tape material Tape break force Top cover tape strength Top cover tape peel force Tape peel angle Cavity play Please read Important notes and Cautions and warnings. Polystyrol (PS) Polystyrol (PS) or Polycarbonat (PC) or PVC min. 10 N min. 10 N 0.1 ... 1.0 N for 8-mm tape and 0.1 ... 1.3 N for 12-mm tape at a peel speed of 300 mm/min Angle between top cover tape and the direction of feed during peel off: 165° ... 180° Each part rests in the cavity so that the angle between the part and cavity center line is no more than 20° Page 3 of 10 Taping and packing 1.2 Cardboard tape (to IEC 60286-3) Dimensions (mm) Tolerance (mm) 8-mm tape Case size 0402 0603 A0 0.6 0.95 ±0.2 B0 1.15 1.8 ±0.2 T T2 0.6 0.75 0.95 1.1 ±0.05 max. D0 P0 P2 P1 1.5 4.0 2.0 2.0 +0.1/0 4.0 2.0 4.0 ±0.12) ±0.05 ±0.1 W 8.0 ±0.3 E 1.75 ±0.1 F 3.5 ±0.05 G 0.75 min. 2) ≤0.2 mm over 10 sprocket holes. Please read Important notes and Cautions and warnings. Page 4 of 10 Taping and packing Part orientation in tape pocket for cardboard tape For chip thermistors case sizes 0402 and 0603 Additional taping information Reel material Tape material Tape break force Top cover tape strength Top cover tape peel force Tape peel angle Cavity play Please read Important notes and Cautions and warnings. Polystyrol (PS) Cardboard min. 10 N min. 10 N 0.1 ... 1.0 N at a peel speed of 300 mm/min Angle between top cover tape and the direction of feed during peel off: 165° ... 180° Each part rests in the cavity so that the angle between the part and cavity center line is no more than 20° Page 5 of 10 Taping and packing 1.3 Reel dimensions 180-mm reel with 8-mm tape Figure 4 Dimension A W1 W2 180-mm reel 180 2/+0 8.4 +1.5/0 14.4 max. 330-mm reel with 16-mm tape Figure 5 Dimension A W1 W2 330-mm reel 330 2/+0 16.4 +2.0/0 22.4 max. 330-mm reel with 24-mm tape Figure 6 Dimension A W1 W2 330-mm reel 330 2/+0 24.4 min. 30.4 max. 380-mm reel with 24-mm tape Figure 4 Dimension A W1 W2 Please read Important notes and Cautions and warnings. Page 6 of 10 380-mm reel 380 2/+0 24.4 min. 30.4 max. Taping and packing 2 Taping of radial-leaded PTC thermistors Dimensions and tolerances (taping to IEC 60286-2, lead spacing 5.0 mm) Dimension (mm) w th d P0 P1 F ∆h ∆p W W0 W1 W2 H H0 H1 D0 t L L1 6.0 0.5/0.6 12.7 3.85 5.0 0 0 18.0 5.5 9.0 3.0 18.0 16.0 32.2 4.0 0.9 11.0 4.0 Please read Important notes and Cautions and warnings. Tolerance Remarks valid for w ≤ 11 mm see dimensional drawings max. ± 0.05 ± 0.3 ±1 mm / 20 sprocket holes ± 0.7 +0.6/0.1 ± 2.0 measured at top of component body ± 1.3 ± 0.5 min. peel-off force ≥ 5 N +0.75/0.5 max. +2.0/0 ± 0.5 max. ± 0.2 max. without wires max. max. Page 7 of 10 Taping and packing Modes of packing Ammo packing Packing unit: 500 ... 2000 pcs./box Reel packing Packing unit: 500 ... 2000 pcs./reel Reel dimensions (in mm) d f 360 max. 31 ±1 Please read Important notes and Cautions and warnings. n approx. 45 Page 8 of 10 w 54 max. Taping and packing Cassette packing Packing unit: 1000 ... 2000 pcs./cassette Please read Important notes and Cautions and warnings. Page 9 of 10 Taping and packing 3 Packing codes The last two digits of the complete ordering code state the packing mode. Last two digits 10, 20   40 51 53 54 55 61 62  Radial leads, kinked Radial leads, straight Radial leads, kinked Radial leads, straight SMDs SMDs 70 Radial leads, kinked or straight Various (e.g. blister tray, cardboard tray, cardboard box or tube packing)  Bulk Taped Reel packing Taped Reel packing Taped Ammo packing Taped Ammo packing Taped Reel packing, blister tape Taped Reel packing, cardboard or blister tape Untaped Cardboard strips Example: B59890C0120A070: Radial leads, untaped on cardboard strips B59890C0120A051: Radial leads, kinked, taped on reel packing Please read Important notes and Cautions and warnings. Page 10 of 10