B72530G1140S862

CTVS - Ceramic transient voltage suppressors Multilayer varistors (MLVs), G series, open mode design Series/Type: Ordering code: CT1210S14BAUTOGOM_G B72530G1140S862 Date: Version: 2020-04-08 1 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then change the color to "white". This ensures that the table disappears (invisible) for the customer PDF. Don't change formatting when entering or pasting text in the table and don't add any cell or line in and to it! Identification/Classification 1 (header 1 + top left header bar): Identification/Classification 2 (header 2 + bottom left header bar): Ordering code: (top right header bar) Series/Type: (top right header bar) Preliminary data (optional): Department: Date: Version: Prepared by: Release signed PD: Release signed QS: Modifications/Remarks: CTVS - Ceramic transient voltage suppressors Multilayer varistors (MLVs), G series, open mode design B72530G1140S862 CT1210S14BAUTOGOM_G PPD ML PD 2020-04-08 1 Dr. Schrank Dr. Pecina Dr. Paulitsch Data sheet for open mode design G-series, features updated  TDK Electronics AG 2020. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without TDK Electronics' prior express consent is prohibited. CTVS - Ceramic transient voltage suppressors Multilayer varistors (MLVs), G series, open mode design B72530G1140S862 CT1210S14BAUTOGOM_G Description The G series multilayer ceramic varistors has been developed to protect automotive electronic circuits against transient overvoltages, such as electrostatic discharges and surge currents. The open mode design excludes an overlap of the inner active area with the termination band width. Thus the likelihood that a potential bending crack of the MLV will link opposite electrodes causing a short is minimized. Features  Open mode design  Fulfill failsafe requirements acc. VW 80808-1: 2020-03  Qualified based on AEC-Q200 and VW 80808-2: 2020-03  Reliable ESD protection up to 30 kV acc. to IEC 61000-4-2  Protection against electrical transients acc. to ISO 7637-2  High energy absorption capability  Low leakage current  No temperature derating up to 150 °C  High life time robustness  Stable protection level  RoHS-compatible, lead-free Designation system CT 1210 S...B 14 AUTO G OM _G Chip with three-layer-termination (Ag/Ni/Sn) Dimensions of the device 12 x 10 (length x width in 1/100 inch) Special tolerance B of the varistor voltage Maximum RMS operating voltage Suited for AUTOmotive application Taped version, blister tape, 7" reel (3000 pcs./ reel) Open Mode design Identifier for MLV automotive G series PPD ML PD Please read Cautions and warnings and Important notes at the end of this document. 2020-04-08 Page 2 of 13 CTVS - Ceramic transient voltage suppressors Multilayer varistors (MLVs), G series, open mode design B72530G1140S862 CT1210S14BAUTOGOM_G Electrical data Maximum operating voltage RMS voltage VRMS = 14 V DC voltage VDC = 16 V Varistor voltage (@ 1 mA, 25 °C) Maximum clamping voltage (@ 2.5 A) Maximum leakage current (@ 16 V, 25 °C) Typical leakage current (@ 14 V, 25 °C) Maximum average power dissipation Maximum surge current (8/20 µs) Maximum energy absorption (2 ms) Load dump Jump-start VV = 22.0 … 27.0 V Vclamp,max = 40 V Ileak,max = 5 µA Ileak =