B78108E1331M000

Inductors RF chokes, BC+ series Series/Type: Ordering code: B78108E, B78148E Date: Version: July 2015 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then change the color to "white". This ensures that the table disappears (invisible) for the customer PDF. Don't change formatting when entering or pasting text in the table and don't add any cell or line in and to it! Identification/Classification 1 Inductors (header 1 + top left bar): Identification/Classification 2 RF chokes, BC+ series (header 2 + bottom left header bar): Ordering code: (top right header bar) Series/Type: (bottom right header bar) B78108E, B78148E Preliminary data (optional): Department: SZ MAG PD IN/T Date: July 2015 Version:  EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. Inductors RF chokes, BC+ series B78108E, B78148E BC chokes Rated inductance 0.1 μH … 100 μH Rated current 640 mA .. 7300 mA Construction  Ferrite drum core  Winding: enamel copper wire  Flame-retardant lacquer coating B78108E Features      Very high rated current High saturation behaviour High self-resonance frequency Suitable for wave soldering RoHS-compatible Applications      DC-DC converter Filtering of supply voltage & battery charger (EMI) RF blocking and filtering Decoupling and interference suppression For telecommunications, LED and energy-saving lamps, solar LED lamps, entertainment electronics B78148E Terminals     Radially bent to 5mm lead spacing (B78148E) Central axial leads (B78108E) Base material Cu Electroplated with nickel and pure tin Marking  Inductance indicated by color bands in accordance with IEC 60062 Delivery mode and packing units  Taped, Ammo and reel packing  Packing units: Ammo (pcs./pack.) Axial 2500 Radial 2500 Reel (pcs./reel) 5000 2000 SZ MAG PD IN/T Please read Cautions and warnings and Important notes at the end of this document. July 2015 Page 2 of 8 Inductors RF chokes, BC+ series B78108E, B78148E Dimensional drawings B78108E (axial leads, taped) Dimensions in mm Minimum lead spacing 12.5 mm B78148E (central radial leads, taped) Dimensions in mm Packing n (mm): w (mm): Dimensions in mm axial 72 + 1, radial 42 + 1 axial 84 max., radial 54 max. L x W x H (max. mm): axial: 275 x 80 x 140, radial: 340 x 50 x 210 SZ MAG PD IN/T Please read Cautions and warnings and Important notes at the end of this document. July 2015 Page 3 of 8 Inductors RF chokes, BC+ series B78108E, B78148E Technical data and measuring conditions Rated inductance LR Measured with LCR meter Agilent 4284A or impedance analyzer Agilent 4294A Measuring current: Measuring temperature: 1 mA +20 ºC Q factor Qmin Measured with impedance analyzer Agilent 4294A, +20 °C Rated temperature TR +40 °C Rated current IR Maximum permissible DC current based on rated temperature of +40 °C and component temperature of max. +125 °C Saturation current Isat Max. permissible DC with inductance decrease ∆L/L0 of approx. 10%, at +20 ºC (Agilent 4284A and 42841A) DC resistance Rmax Measured at +20 ºC Resonance frequency fres,min Measured with Agilent 4294A or 8753ES, +20 °C Solderability (lead-free) Sn95.5Ag3.8Cu0.7: Wetting of soldering area: Resistance to soldering heat (+260 ±5)°C, 10 s (to IEC 60068-2-20, test Tb) Tensile strength of leads ≥ 20 N (to IEC 60068-2-21, test Ua) Climatic category 55/125/56 (to IEC 60068-1) Storage conditions Mounted: –55 °C ... +125 °C Packaged: –25 °C ... +40 °C, ≤ 75% RH Weight Approx. 0.38 g (+245 ±5) °C, (3 ±0.3) s ≥ 90% (to IEC 60068-2-20, test Ta) Mounting information: When bending the leads, take care that the start-of-winding areas at the face ends (protected by glue and lacquer) are not subjected to any mechanical stress. SZ MAG PD IN/T Please read Cautions and warnings and Important notes at the end of this document. July 2015 Page 4 of 8 Inductors RF chokes, BC+ series B78108E, B78148E Characteristics and ordering codes LR Tolerance μH 0.1 fL MHz Qmin fQ MHz IR mA Isat mA Rmax Ω fres, min Ordering code 1) MHz (reel packing) 2) 1.0 50 7.96 7300 17000 0.015 700 B781*8E1101M000 0.15 1.0 50 7.96 6500 14500 0.017 650 B781*8E1151M000 0.22 1.0 55 7.96 5900 12200 0.019 610 B781*8E1221M000 0.33 1.0 60 7.96 5300 10100 0.023 480 B781*8E1331M000 0.47 1.0 60 7.96 5000 8500 0.027 400 B781*8E1471M000 0.68 1.0 60 7.96 4600 7100 0.031 360 B781*8E1681M000 1.0 60 7.96 4150 5800 0.038 260 B781*8E1102K000 1.5 1.0 60 7.96 3800 4800 0.047 235 B781*8E1152K000 2.2 1.0 50 7.96 3400 4000 0.057 150 B781*8E1222K000 3.3 1.0 45 7.96 3050 3250 0.073 75 B781*8E1332K000 4.7 1.0 45 7.96 2750 2700 0.085 35 B781*8E1472K000 6.8 1.0 40 7.96 2450 2300 0.105 25 B781*8E1682K000 10 1.0 35 7.96 2250 2000 0.136 20 B781*8E1103K000 15 0.1 40 0.796 1600 1450 0.230 15 B781*8E1153K000 22 0.1 40 0.796 1300 1250 0.350 12 B781*8E1223K000 0.1 50 0.796 1050 1000 0.550 9.0 B781*8E1333J000 47 0.1 40 0.796 950 870 0.680 8.0 B781*8E1473J000 68 0.1 45 0.796 780 720 0.900 6.5 B781*8E1683J000 100 0.1 60 0.796 640 580 1.450 6.0 B781*8E1104J000 1.0 33 ±20% ≙ M ±10% ≙ K ±5% ≙ J 1) Replace the * by code number “0” for axial taping or by “4” for radial taping. 2) For Ammo pack the last digit has to be a “9”. Example: B78108E1223K009 SZ MAG PD IN/T Please read Cautions and warnings and Important notes at the end of this document. July 2015 Page 5 of 8 Inductors RF chokes, BC+ series B78108E, B78148E Impedance |Z| versus frequency f Inductance L versus DC load current IDC measured with impedance analyzer Agilent 4294A or S-parameter network analyzer Agilent 8753ES, typical values at +20 °C measured with LCR meter Agilent 4284A and 42841A , typical values at +20 °C Ω Q factor versus frequency f measured with impedance analyzer Agilent 4294A, typical values at +20 °C Current derating IOP/IR versus ambient temperature TA (rated temperature TR = +40 °C) SZ MAG PD IN/T Please read Cautions and warnings and Important notes at the end of this document. July 2015 Page 6 of 8 Inductors RF chokes, BC+ series B78108E, B78148E Cautions and warnings ■ Please note the recommendations in our Inductors data book (latest edition) and in the data sheets. – Particular attention should be paid to the derating curves given there. – The soldering conditions should also be observed. Temperatures quoted in relation to wave soldering refer to the pin, not the housing. ■ If the components are to be washed varnished it is necessary to check whether the washing varnish agent that is used has a negative effect on the wire insulation, any plastics that are used, or on glued joints. In particular, it is possible for washing varnish agent residues to have a negative effect in the long-term on wire insulation Washing processes may damage the product due to the possible static or cyclic mechanical loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its parts, which might lead to reduced reliability or lifetime. ■ The following points must be observed if the components are potted in customer applications: – Many potting materials shrink as they harden. They therefore exert a pressure on the plastic housing or core. This pressure can have a deleterious effect on electrical properties, and in extreme cases can damage the core or plastic housing mechanically. – It is necessary to check whether the potting material used attacks or destroys the wire insulation, plastics or glue. – The effect of the potting material can change the high-frequency behaviour of the components. ■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to breakage of the core. ■ Even for customer-specific products, conclusive validation of the component in the circuit can only be carried out by the customer. Display of ordering codes for EPCOS products The ordering code for one and the same product can be represented differently in data sheets, data books, other publications and the website of EPCOS, or in order-related documents such as shipping notes, order confirmations and product labels. The varying represantations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products. Detailed information can be found on the Internet under www.epcos.com/orderingcodes. SZ MAG PD IN/T Please read Cautions and warnings and Important notes at the end of this document. July 2015 Page 7 of 8 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule we are either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether a product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.tdk-electronics.tdk.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to our General Terms and Conditions of Supply. 7. Our manufacturing sites serving the automotive business apply the IATF 16949 standard. The IATF certifications confirm our compliance with requirements regarding the quality management system in the automotive industry. Referring to customer requirements and customer specific requirements (“CSR”) TDK always has and will continue to have the policy of respecting individual agreements. Even if IATF 16949 may appear to support the acceptance of unilateral requirements, we hereby like to emphasize that only requirements mutually agreed upon can and will be implemented in our Quality Management System. For clarification purposes we like to point out that obligations from IATF 16949 shall only become legally binding if individually agreed upon. 8. The trade names EPCOS, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CTVS, DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PowerHap, PQSine, PQvar, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.tdkelectronics.tdk.com/trademarks. Release 2018-10 Page 8 of 8