CGA3EAC0G2A152J080AC 数据手册
MULTILAYER CERAMIC CHIP CAPACITORS
April 2019
MULTILAYER CERAMIC CHIP CAPACITORS
Automotive grade, ESD protection
CGA3EA series
CGA3EA
1608 [0603 inch]
* Dimensions code: JIS[EIA]
(2/7)
MULTILAYER CERAMIC CHIP CAPACITORS
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using this products.
REMINDERS
1. The products listed in this specification are intended for use in automotive applications under normal operation and usage conditions.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality
requires a more stringent level of safety or reliability, or whose failure, malfunction or defect could cause serious damage to society, person or
property.
Please understand that we are not responsible for any damage or liability caused by use of the products in any of the applications below or for
any other use exceeding the range or conditions set forth in this specification sheet. If you intend to use the products in the applications listed
below or if you have special requirements exceeding the range or conditions set forth in this specification, please contact us.
(1) Aerospace/aviation equipment
(2) Transportation equipment (electric trains, ships, etc.)
(3) Medical equipment (excepting Pharmaceutical Affairs Law classification Class1,2)
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection
circuit/device or providing backup circuits in your equipment.
2.
3.
4.
5.
6.
7.
In addition, although the products listed in this specification are intended for use in automotive applications as described above, they are not
prohibited to use in general electronic equipment, whose performance and/or quality doesn’t require a more stringent level of safety or reliability,
or whose failure, malfunction or defect could not cause serious damage to society, person or property. Therefore, the description of this caution
will be applied, when the products are used in general electronic equipment under a normal operation and usage conditions.
We may modify products or discontinue production of a product listed in this catalog without prior notification.
We provide “Delivery Specification” that explain precautions for the specifications and safety of each product listed in this catalog. We strongly
recommend that you exchange these delivery specifications with customers that use one of these products.
If you plan to export a product listed in this catalog, keep in mind that it may be a restricted item according to the “Foreign Exchange and Foreign Trade Control Law”. In such cases, it is necessary to acquire export permission in harmony with this law.
Any reproduction or transferring of the contents of this catalog is prohibited without prior permission from our company.
We are not responsible for problems that occur related to the intellectual property rights or other rights of our company or a third party when you
use a product listed in this catalog. We do not grant license of these rights.
This catalog only applies to products purchased through our company or one of our company’s official agencies. This catalog does not apply to
products that are purchased through other third parties.
Notice: Effective January 2013, TDK will use a new catalog number which adds product thickness and packaging specification detail.
This new catalog number should be referenced on all catalog orders going forward, and is not applicable for OEM part number
orders.
Please be aware the last five digits of the catalog number will differ from the item description (internal control number) on the
product label.
Contact your local TDK Sales representative for more information.
(Example)
Catalog issued date
Prior to January 2013
January 2013 and later
Catalog number
C1608C0G1E103J(080AA)
C1608C0G1E103J080AA
Item description (on delivery label)
C1608C0G1E103JT000N
C1608C0G1E103JT000N
20190409 / mlcc_automotive_esd_en.fm
(3/7)
MULTILAYER CERAMIC CHIP CAPACITORS
CGA3EA series
Cl
Br
ESD protection
RoHS
REACH Halogen
Free
SVHC-Free
Pb
Lead
Free
Type: CGA3EA/1608 [0603 inch]
■ SERIES OVERVIEW
ESD protection CGA3EA series, automotive grade of TDK's multilayer ceramic chip capacitor, is a product which has passed the most rigorous level
4 (8000V and above) of ESD tests for contact discharge under the IEC61000-4-2 international standard. The operating temperature range is up to
150°C, and so it is available for under high temperature environment. The capacitance range is up to 10nF.
■ FEATURES
■ APPLICATIONS
• Compliant with the IEC 61000-4-2 (level 4) for ESD immunity
• Operating temperature range is up to 150°C (NP0: 0±30ppm/°C, –55
to +150°C)
• AEC-Q200 compliant.
• Input/output parts of various ECUs (Engine ECU, EPS, TCM, ABS,
etc.) that require ESD protection.
■ SHAPE & DIMENSIONS
■ PRODUCT STRUCTURE
W
L
T
Sn
Ni
Cu
G
B
L
W
T
B
G
The structure which multiple sheets of dielectric and conductive material
are layered alternately. The superior mechanical strength and reliability
are realized by the monolithic and simple structure.
Body length
Body width
Body height
Terminal width
Terminal spacing
Type
L
W
CGA3EA 1.60±0.10
0.80±0.10
Dimensional tolerances are typical values.
T
0.80±0.10
Dimensions in mm
B
G
0.20min.
0.30min.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20190409 / mlcc_automotive_esd_en.fm
(4/7)
MULTILAYER CERAMIC CHIP CAPACITORS
■ CATALOG NUMBER CONSTRUCTION
CGA
3
E
A
NP0
2A
103
J
080
A
C
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(1) Series
(2) Dimensions L x W (mm)
Code
3
EIA
CC0603
Length
1.60
Width
0.80
Terminal width
0.20
(3) Thickness code
Code
E
(Example)0R5 = 0.5pF
101 = 100pF
225 = 2,200,000pF = 2.2µF
Thickness
0.80 mm
(8) Capacitance tolerance
(4) Function identification code
Symbol
A
Code
J
Condition
ESD protection
Temperature coefficient
Temperature range
0±30 ppm/°C
0±30 ppm/°C
–55 to +125°C
–55 to +150°C
(6) Rated voltage (DC)
Code
2A
Voltage (DC)
100V
Tolerance
±5%
(9) Thickness
(5) Temperature characteristics
Temperature
characteristics
C0G
NP0
(7) Nominal capacitance (pF)
The capacitance is expressed in three digit codes and in units of
pico Farads (pF). The first and second digits identify the first and
second significant figures of the capacitance. The third digit identifies the multiplier. R designates a decimal point.
Code
080
Thickness
0.80 mm
(10) Packaging style
Code
A
Style
178mm reel, 4mm pitch
(11) Special reserved code
Code
A,C
Description
TDK internal code
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20190409 / mlcc_automotive_esd_en.fm
(5/7)
MULTILAYER CERAMIC CHIP CAPACITORS
Capacitance range chart
Capacitance
(pF)
1,000
1,500
2,200
3,300
4,700
6,800
10,000
Code
C0G
NP0
ESD
resistance
2A
(100V)
2A
(100V)
(V)
102
152
222
332
472
682
103
Standard thickness
CGA3/1608 [0603 inch]
8,000
10,000
12,000
16,000
16,000
22,000
30,000
0.80mm
■ Please refer to the capacitance range table at P-6 and after for the details such as product thickness and capacitance tolerance.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20190409 / mlcc_automotive_esd_en.fm
(6/7)
MULTILAYER CERAMIC CHIP CAPACITORS
Capacitance range table
Capacitance Dimensions
1nF
1.5nF
2.2nF
3.3nF
4.7nF
6.8nF
10nF
1608
1608
1608
1608
1608
1608
1608
Temperature characteristics: C0G (–55 to +125°C, 0±30ppm/°C)
Thickness
(mm)
Capacitance
tolerance
Catalog number
Rated voltage Edc: 100V
0.80±0.10
0.80±0.10
0.80±0.10
0.80±0.10
0.80±0.10
0.80±0.10
0.80±0.10
±5%
±5%
±5%
±5%
±5%
±5%
±5%
CGA3EAC0G2A102J080AA
CGA3EAC0G2A152J080AC
CGA3EAC0G2A222J080AC
CGA3EAC0G2A332J080AC
CGA3EAC0G2A472J080AC
CGA3EAC0G2A682J080AC
CGA3EAC0G2A103J080AC
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20190409 / mlcc_automotive_esd_en.fm
(7/7)
MULTILAYER CERAMIC CHIP CAPACITORS
Capacitance range table
Capacitance Dimensions
1nF
1.5nF
2.2nF
3.3nF
4.7nF
6.8nF
10nF
1608
1608
1608
1608
1608
1608
1608
Temperature characteristics: NP0 (–55 to +150°C, 0±30ppm/°C)
Thickness
(mm)
Capacitance
tolerance
Catalog number
Rated voltage Edc: 100V
0.80±0.10
0.80±0.10
0.80±0.10
0.80±0.10
0.80±0.10
0.80±0.10
0.80±0.10
±5%
±5%
±5%
±5%
±5%
±5%
±5%
CGA3EANP02A102J080AA
CGA3EANP02A152J080AC
CGA3EANP02A222J080AC
CGA3EANP02A332J080AC
CGA3EANP02A472J080AC
CGA3EANP02A682J080AC
CGA3EANP02A103J080AC
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20190409 / mlcc_automotive_esd_en.fm