CGAEA2X7R1E473M030BA 数据手册
MULTILAYER CERAMIC CHIP CAPACITORS
September 2021
MULTILAYER CERAMIC CHIP CAPACITORS
Automotive grade, low ESL reverse geometry
CGA series
CGAE
0510 [0204 inch]
* Dimensions code: JIS[EIA]
(2/5)
MULTILAYER CERAMIC CHIP CAPACITORS
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using this products.
REMINDERS
1. The products listed in this specification are intended for use in automotive applications under normal operation and usage conditions.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality
requires a more stringent level of safety or reliability, or whose failure, malfunction or defect could cause serious damage to society, person or
property.
Please understand that we are not responsible for any damage or liability caused by use of the products in any of the applications below or for
any other use exceeding the range or conditions set forth in this specification sheet. If you intend to use the products in the applications listed
below or if you have special requirements exceeding the range or conditions set forth in this specification, please contact us.
(1) Aerospace/aviation equipment
(2) Transportation equipment (electric trains, ships, etc.)
(3) Medical equipment (excepting Pharmaceutical Affairs Law classification Class1,2)
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection
circuit/device or providing backup circuits in your equipment.
2.
3.
4.
5.
6.
7.
In addition, although the products listed in this specification are intended for use in automotive applications as described above, they are not
prohibited to use in general electronic equipment, whose performance and/or quality doesn’t require a more stringent level of safety or reliability,
or whose failure, malfunction or defect could not cause serious damage to society, person or property. Therefore, the description of this caution
will be applied, when the products are used in general electronic equipment under a normal operation and usage conditions.
We may modify products or discontinue production of a product listed in this catalog without prior notification.
We provide “Delivery Specification” that explain precautions for the specifications and safety of each product listed in this catalog. We strongly
recommend that you exchange these delivery specifications with customers that use one of these products.
If you plan to export a product listed in this catalog, keep in mind that it may be a restricted item according to the “Foreign Exchange and Foreign Trade Control Law”. In such cases, it is necessary to acquire export permission in harmony with this law.
Any reproduction or transferring of the contents of this catalog is prohibited without prior permission from our company.
We are not responsible for problems that occur related to the intellectual property rights or other rights of our company or a third party when you
use a product listed in this catalog. We do not grant license of these rights.
This catalog only applies to products purchased through our company or one of our company’s official agencies. This catalog does not apply to
products that are purchased through other third parties.
Notice: Effective January 2013, TDK will use a new catalog number which adds product thickness and packaging specification detail.
This new catalog number should be referenced on all catalog orders going forward, and is not applicable for OEM part number
orders.
Please be aware the last five digits of the catalog number will differ from the item description (internal control number) on the
product label.
Contact your local TDK Sales representative for more information.
(Example)
Catalog issued date
Prior to January 2013
January 2013 and later
Catalog number
C1608C0G1E103J(080AA)
C1608C0G1E103J080AA
Item description (on delivery label)
C1608C0G1E103JT000N
C1608C0G1E103JT000N
20210916 / mlcc_automotive_lwreverse_cga_en.fm
(3/5)
MULTILAYER CERAMIC CHIP CAPACITORS
CGA series
Cl
Br
Low ESL reverse geometry
RoHS
REACH Halogen
Free
SVHC-Free
Pb
Lead
Free
Type: CGAE/0510 [0204 inch]
■ SERIES OVERVIEW
Low ESL reverse geometry CGA series, automotive grade of TDK's multilayer ceramic chip capacitor, is a product whose electrodes rotated 90
degrees compared to general type. The structure makes the current route wider and shorter, therefore ESR/ESL and impedance are reduced.
■ FEATURES
■ APPLICATION
• Reduction in ESR/ESL and impedance due to the reverse geometry
structure
• Superior attenuation characteristic in wide bandwidth
• Contributes to reduction in the number of decoupling MLCCs
• AEC-Q200 compliant
• EMC countermeasure and decoupling use in power lines for automotive applications such as ADAS, autonomous driving system ECU, etc.
■ SHAPE & DIMENSIONS
■ PRODUCT STRUCTURES
General type
Reverse geometry type
L
W
T
B
Sn
Ni
Cu
L
W
T
B
Body length
Body width
Body height
Terminal width
Type
L
W
CGAEA
0.52±0.05
1.00±0.05
CGAEB
0.58±0.10
1.10±0.10
CGAEW
0.50±0.10
1.00±0.10
Dimensional tolerances are typical values.
The structure which multiple sheets
of dielectric and conductive material
are stacked alternately
T
0.30±0.05
0.58±0.10
0.20±0.05
The current route becomes wider and
shorter due to the reverse geometry
structure which the electrode direction
rotated 90 degrees compared to general type.
Dimensions in mm
B
0.10 min.
0.10 min.
0.10 min.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20210916 / mlcc_automotive_lwreverse_cga_en.fm
(4/5)
MULTILAYER CERAMIC CHIP CAPACITORS
■ CATALOG NUMBER CONSTRUCTION
CGA
E
B
1
X7T
0G
105
M
050
B
C
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(1) Series
(2) Dimensions L x W (mm)
Dimensions
code
E
EIA
Length
Width
Terminal width
CC0204
0.50
1.00
0.10
(Example)0R5 = 0.5pF
101 = 100pF
225 = 2,200,000pF = 2.2µF
(3) Thickness code
Code
A
B
W
(7) Nominal capacitance (pF)
The capacitance is expressed in three digit codes and in units of
pico Farads (pF). The first and second digits identify the first and
second significant figures of the capacitance. The third digit identifies the multiplier. R designates a decimal point.
Thickness
0.30mm
0.50mm
0.20mm
(8) Capacitance tolerance
Code
M
Tolerance
±20%
(4) Voltage condition for life test
Symbol
1
2
3
Condition
1 x R.V.
2 x R.V.
1.5 x R.V.
(9) Thickness
Code
020
030
050
Thickness
0.20mm
0.30mm
0.50mm
(5) Temperature characteristics
Temperature
characteristics
Capacitance change
Temperature range
X7R
X7T
±15%
+22,–33%
–55 to +125°C
–55 to +125°C
(6) Rated voltage (DC)
Code
1H
1E
0J
0G
Voltage (DC)
50V
25V
6.3V
4V
(10) Packaging style
Code
B
Style
178mm reel, 2mm pitch
(11) Special reserved code
Code
A, B, C
Description
TDK internal code
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20210916 / mlcc_automotive_lwreverse_cga_en.fm
(5/5)
MULTILAYER CERAMIC CHIP CAPACITORS
Capacitance range chart
Capacitance
(pF)
X7R
1H
(50V)
Code
47,000
100,000
1,000,000
CGAE/0510 [0204 inch]
X7T
1E
(25V)
0J
(6.3V)
0G
(4V)
473
104
105
Standard thickness
0.20mm
0.30mm
0.50mm
■ Refer to the capacitance range table below for product thickness and capacitance tolerance.
Capacitance range table
Temperature characteristic: X7R (–55 to +125°C, ±15%)
Capacitance Dimensions
47nF
0510
Thickness
(mm)
Capacitance
tolerance
Catalog number
Rated voltage Edc: 50V
Rated voltage Edc: 25V
0.30±0.05
±20%
CGAEA1X7R1H473M030BC
CGAEA2X7R1E473M030BA
Click the part number for details.
Capacitance range table
Capacitance Dimensions
100nF
0510
1µF
0510
Thickness
(mm)
Capacitance
tolerance
0.20±0.05
0.30±0.05
0.58±0.10
±20%
±20%
±20%
Temperature characteristic: X7T (–55 to +125°C, +22, –33%)
Catalog number
Rated voltage Edc: 6.3V
CGAEA1X7T0J104M030BC
Rated voltage Edc: 4V
CGAEW1X7T0G104M020BC
CGAEA3X7T0G104M030BB
CGAEB1X7T0G105M050BC
Click the part number for details.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20210916 / mlcc_automotive_lwreverse_cga_en.fm
CGAEA2X7R1E473M030BA 价格&库存
很抱歉,暂时无法提供与“CGAEA2X7R1E473M030BA”相匹配的价格&库存,您可以联系我们找货
免费人工找货- 国内价格 香港价格
- 1+0.099571+0.01205
- 10+0.0475210+0.00575