CKC Series
Array Type Capacitors
Type:
CKCM25
CKCL22
CKCL44
CKCA43
Issue date:
April 2011
TDK MLCC
US Catalog
Version B11
REMINDERS
Please read before using this product
SAFETY REMINDERS
REMINDERS
1.
2.
3.
4.
5.
6.
7.
If you intend to use a product listed in this catalog for a purpose that may cause loss of life or other
damage, you must contact our company’s sales window.
We may modify products or discontinue production of a product listed in this catalog without prior
notification.
We provide “Delivery Specification” that explain precautions for the specifications and safety of each
product listed in this catalog. We strongly recommend that you exchange these delivery specifications
with customers that use one of these products.
If you plan to export a product listed in this catalog, keep in mind that it may be a restricted item according
to the “Foreign Exchange and Foreign Trade Control Law”. In such cases, it is necessary to acquire export
permission in harmony with this law.
Any reproduction or transferring of the contents of this catalog is prohibited without prior permission from
our company.
We are not responsible for problems that occur related to the intellectual property rights or other rights of
our company or a third party when you use a product listed in this catalog. We do not grant license of
these rights.
This catalog only applies to products purchased through our company or one of our company’s official
agencies. This catalog does not apply to products that are purchased through other third parties.
TDK MLCC US Catalog
Page 244
Version B11
CKC Series
2 & 4 Elements Array Capacitors
Type: CKCM25 (C1310), CKCL22 (C2012),
CKCL44 (C2012), CKCA43 (C3216)
Features
Applications
• Multiple capacitors are fitted in a single
product, contributing to reduced installation
costs.
• The electrostatic capacity range and shape
are designed to meet the demands of the
cellular phone market.
• Reduced crosstalk (signal interference)
between the terminals.
•
•
•
•
•
•
Shape &
Dimensions
2 Elements Type
L
W
T
C
P
Body Length
Body Width
Body Height
Terminal Width
Terminal Spacing
4 Elements Type
Cellular telephone interface
Interface cable circuit
PC and peripherals
CPU bus line
High frequency circuit
Noise bypass circuit
L
W
T
C
P
Body Length
Body Width
Body Height
Terminal Width
Terminal Spacing
Part Number
Construction
CKCM25 X7R 1E 103 M T XXXX
Internal Codes
Series Name
Case Code
CKCM25
CKCL22
CKCL44
CKCA43
Length
1.37 ± 0.15
2.00 ± 0.15
2.00 ± 0.15
3.20 ± 0.20
Packaging Style
Width
1.00 ± 0.15
1.25 ± 0.15
1.25 ± 0.15
1.60 ± 0.20
Capacitance
Change
0±30 ppm/ºC
±15%
±15%
Temperature
Range
-55 to +125ºC
-55 to +85ºC
-55 to +125ºC
Voltage (DC)
6.3V
10V
16V
25V
50V
TDK MLCC US Catalog
Tolerance Code
F
K
M
Tolerance
± 1%
± 10%
± 20%
Nominal Capacitance (pF)
The capacitance is expressed in
three digit codes and in units of pico
Farads (pF). The first and second
digits identify the first and second
significant figures of the capacitance.
The third digit identifies the multiplier.
R designates a decimal point.
Rated Voltage (DC)
Voltage Code
0J
1A
1C
1E
1H
Style
Tape & Reel
Capacitance Tolerance
Temperature Characteristic
Temperature
Characteristics
C0G
X5R
X7R
Packaging Code
T
Capacitance Code
0R5
010
102
105
Page 245
Capacitance
0.5pF
1pF
1,000pF (1nF)
1,000,000pF (1µF)
Version B11
Capacitance
Range Chart
CKCM25 [EIA CC0504]
Capacitance Range Chart
Temperature Characteristics: C0G (0 ± 30 ppm/ºC), X7R, (± 15%), X5R (± 15%)
Rated Voltage: 50V (1H), 25V (1E), 16V (1C), 10V (1A), 6.3V (0J)
Capacitance
(pF)
10
15
22
33
47
68
100
1,000
2,200
4,700
10,000
22,000
47,000
100,000
220,000
470,000
1,000,000
100
150
220
330
470
680
101
102
222
472
103
223
473
104
224
474
105
X7R
C0G
Cap
Code
Tolerance
1H
(50V)
1H
(50V)
X5R
1E
(25V)
1C
(16V)
1A
(10V)
0J
(6.3V)
F: ± 1%
K: ± 10%
M: ± 20%
Standard Thickness
0.60 mm
0.80 mm
Capacitance
Range Table
CKCM25 [EIA CC0504]
Class 1 (Temperature Compensating)
Temperature Characteristics: C0G (-55 to 125ºC, 0±30 ppm/ºC)
TDK Part Number
Temperature
Rated
Capacitance
(Ordering Code)
Characteristics
Voltage
(pF)
Capacitance
Tolerance
Thickness
(mm)
CKCM25C0G1H100F
C0G
50V
10
± 1%
0.60 ± 0.06
CKCM25C0G1H150K
C0G
50V
15
± 10%
0.60 ± 0.06
CKCM25C0G1H220K
C0G
50V
22
± 10%
0.60 ± 0.06
CKCM25C0G1H330K
C0G
50V
33
± 10%
0.60 ± 0.06
CKCM25C0G1H470K
C0G
50V
47
± 10%
0.60 ± 0.06
CKCM25C0G1H680K
C0G
50V
68
± 10%
0.60 ± 0.06
CKCM25C0G1H101K
C0G
50V
100
± 10%
0.60 ± 0.06
Class 2 (Temperature Stable)
Temperature Characteristics: X7R (-55 to +125ºC, ±15%), X5R (-55 to +85ºC, ±15%)
TDK Part Number
Temperature
Rated
Capacitance
Capacitance
(Ordering Code)
Characteristics
Voltage
(pF)
Tolerance
Thickness
(mm)
CKCM25X7R1H102M
X7R
50V
1,000
± 20%
0.60 ± 0.06
CKCM25X7R1H222M
X7R
50V
2,200
± 20%
0.60 ± 0.06
CKCM25X7R1H472M
X7R
50V
4,700
± 20%
0.60 ± 0.06
CKCM25X7R1E103M
X7R
25V
10,000
± 20%
0.60 ± 0.06
CKCM25X5R1C223M
X5R
16V
22,000
± 20%
0.60 ± 0.06
CKCM25X5R1A473M
X5R
10V
47,000
± 20%
0.60 ± 0.06
CKCM25X5R0J104M
X5R
6.3V
100,000
± 20%
0.60 ± 0.06
CKCM25X5R0J224M
X5R
6.3V
220,000
± 20%
0.60 ± 0.06
CKCM25X5R0J474M
X5R
6.3V
470,000
± 20%
0.80 ± 0.10
CKCM25X5R0J105M
X5R
6.3V
1,000,000
± 20%
0.80 ± 0.10
TDK MLCC US Catalog
Page 246
Version B11
Capacitance
Range Chart
CKCL22 [EIA CC0805]
Capacitance Range Chart
Temperature Characteristics: C0G (0 ± 30 ppm/ºC), X7R, (± 15%), X5R (± 15%)
Rated Voltage: 50V (1H), 25V (1E), 16V (1C), 10V (1A), 6.3V (0J)
Capacitance
(pF)
10
15
22
33
47
68
100
150
220
330
470
1,000
2,200
4,700
10,000
22,000
47,000
100,000
220,000
470,000
1,000,000
2,200,000
100
150
220
330
470
680
101
151
221
331
471
102
222
472
103
223
473
104
224
474
105
225
X7R
C0G
Cap
Code
Tolerance
1H
(50V)
1H
(50V)
X5R
1E
(25V)
1C
(16V)
1A
(10V)
0J
(6.3V)
F: ± 1%
K: ± 10%
M: ± 20%
Standard Thickness
0.85 ± 0.15 mm
Capacitance
Range Table
CKCL22 [EIA CC0805]
Class 1 (Temperature Compensating)
Temperature Characteristics: C0G (-55 to 125ºC, 0±30 ppm/ºC)
TDK Part Number
Temperature
Rated
Capacitance
(Ordering Code)
Characteristics
Voltage
(pF)
Capacitance
Tolerance
Thickness
(mm)
CKCL22C0G1H100F
C0G
50V
10
± 1%
0.85 ± 0.10
CKCL22C0G1H150K
C0G
50V
15
± 10%
0.85 ± 0.10
CKCL22C0G1H220K
C0G
50V
22
± 10%
0.85 ± 0.10
CKCL22C0G1H330K
C0G
50V
33
± 10%
0.85 ± 0.10
CKCL22C0G1H470K
C0G
50V
47
± 10%
0.85 ± 0.10
CKCL22C0G1H680K
C0G
50V
68
± 10%
0.85 ± 0.10
CKCL22C0G1H101K
C0G
50V
100
± 10%
0.85 ± 0.10
CKCL22C0G1H151K
C0G
50V
150
± 10%
0.85 ± 0.10
CKCL22C0G1H221K
C0G
50V
220
± 10%
0.85 ± 0.10
CKCL22C0G1H331K
C0G
50V
330
± 10%
0.85 ± 0.10
CKCL22C0G1H471K
C0G
50V
470
± 10%
0.85 ± 0.10
TDK MLCC US Catalog
Page 247
Version B11
Capacitance
Range Table
CKCL22 [EIA CC0805]
Class 2 (Temperature Stable)
Temperature Characteristics: X7R (-55 to +125ºC, ±15%), X5R (-55 to +85ºC, ±15%)
TDK Part Number
(Ordering Code)
Temperature
Characteristics
Rated
Voltage
Capacitance
(pF)
Capacitance
Tolerance
Thickness
(mm)
CKCL22X7R1H102M
X7R
50V
1,000
± 20%
0.85 ± 0.10
CKCL22X7R1H222M
X7R
50V
2,200
± 20%
0.85 ± 0.10
CKCL22X7R1H472M
X7R
50V
4,700
± 20%
0.85 ± 0.10
CKCL22X7R1H103M
X7R
50V
10,000
± 20%
0.85 ± 0.10
CKCL22X7R1H223M
X7R
50V
22,000
± 20%
0.85 ± 0.10
CKCL22X7R1H473M
X7R
50V
47,000
± 20%
0.85 ± 0.10
CKCL22X7R1E104M
X7R
25V
100,000
± 20%
0.85 ± 0.10
CKCL22X5R1C224M
X5R
16V
220,000
± 20%
0.85 ± 0.10
CKCL22X5R1A474M
X5R
10V
470,000
± 20%
0.85 ± 0.10
CKCL22X5R0J105M
X5R
6.3V
1,000,000
± 20%
0.85 ± 0.10
CKCL22X5R0J225M
X5R
6.3V
2,200,000
± 20%
0.85 ± 0.10
TDK MLCC US Catalog
Page 248
Version B11
Capacitance
Range Chart
CKCL44 [EIA CC0805]
Capacitance Range Chart
Temperature Characteristics: C0G (0 ± 30 ppm/ºC), X7R, (± 15%), X5R (± 15%)
Rated Voltage: 50V (1H), 25V (1E), 16V (1C), 10V (1A), 6.3V (0J)
Capacitance
(pF)
10
15
22
33
47
68
100
150
220
470
1,000
2,200
4,700
10,000
22,000
47,000
100,000
100
150
220
330
470
680
101
151
221
471
102
222
472
103
223
473
104
X7R
C0G
Cap
Code
Tolerance
1H
(50V)
1H
(50V)
X5R
1E
(25V)
1C
(16V)
1A
(10V)
0J
(6.3V)
F: ± 1%
K: ± 10%
M: ± 20%
Standard Thickness
0.85 ± 0.15 mm
Capacitance
Range Table
CKCL44 [EIA CC0805]
Class 1 (Temperature Compensating)
Temperature Characteristics: C0G (-55 to 125ºC, 0±30 ppm/ºC)
TDK Part Number
Temperature
Rated
Capacitance
(Ordering Code)
Characteristics
Voltage
(pF)
Capacitance
Tolerance
Thickness
(mm)
CKCL44C0G1H100F
C0G
50V
10
± 1%
0.85 ± 0.10
CKCL44C0G1H150K
C0G
50V
15
± 10%
0.85 ± 0.10
CKCL44C0G1H220K
C0G
50V
22
± 10%
0.85 ± 0.10
CKCL44C0G1H330K
C0G
50V
33
± 10%
0.85 ± 0.10
CKCL44C0G1H470K
C0G
50V
47
± 10%
0.85 ± 0.10
CKCL44C0G1H680K
C0G
50V
68
± 10%
0.85 ± 0.10
CKCL44C0G1H101K
C0G
50V
100
± 10%
0.85 ± 0.10
CKCL44C0G1H151K
C0G
50V
150
± 10%
0.85 ± 0.10
Class 2 (Temperature Stable)
Temperature Characteristics: X7R (-55 to +125ºC, ±15%), X5R (-55 to +85ºC, ±15%)
TDK Part Number
Temperature
Rated
Capacitance
Capacitance
(Ordering Code)
Characteristics
Voltage
(pF)
Tolerance
Thickness
(mm)
CKCL44X7R1H221M
X7R
50V
220
± 20%
0.85 ± 0.10
CKCL44X7R1H471M
X7R
50V
470
± 20%
0.85 ± 0.10
CKCL44X7R1H102M
X7R
50V
1,000
± 20%
0.85 ± 0.10
CKCL44X7R1H222M
X7R
50V
2,200
± 20%
0.85 ± 0.10
CKCL44X7R1H472M
X7R
50V
4,700
± 20%
0.85 ± 0.10
CKCL44X7R1E103M
X7R
25V
10,000
± 20%
0.85 ± 0.10
CKCL44X7R1C223M
X7R
16V
22,000
± 20%
0.85 ± 0.10
CKCL44X5R1A473M
X5R
10V
47,000
± 20%
0.85 ± 0.10
CKCL44X5R0J104M
X5R
6.3V
100,000
± 20%
0.85 ± 0.10
TDK MLCC US Catalog
Page 249
Version B11
Capacitance
Range Chart
CKCA43 [EIA CC1206]
Capacitance Range Chart
Temperature Characteristics: C0G (0 ± 30 ppm/ºC), X7R, (± 15%), X5R (± 15%)
Rated Voltage: 50V (1H), 25V (1E), 16V (1C), 10V (1A), 6.3V (0J)
Capacitance
(pF)
10
15
22
33
47
68
100
150
220
330
470
680
1,000
2,200
4,700
10,000
22,000
47,000
100,000
220,000
470,000
1,000,000
100
150
220
330
470
680
101
151
221
331
471
681
102
222
472
103
223
473
104
224
474
105
X7R
C0G
Cap
Code
Tolerance
1H
(50V)
1H
(50V)
1E
(25V)
X5R
1C
(16V)
1A
(10V)
0J
(6.3V)
F: ± 1%
K: ± 10%
K: ± 10%
M: ± 20%
M: ± 20%
Standard Thickness
1.00 ± 0.10 mm
Capacitance
Range Table
CKCA43 [EIA CC1206]
Class 1 (Temperature Compensating)
Temperature Characteristics: C0G (-55 to 125ºC, 0±30 ppm/ºC)
TDK Part Number
Temperature
Rated
Capacitance
(Ordering Code)
Characteristics
Voltage
(pF)
Capacitance
Tolerance
Thickness
(mm)
CKCA43C0G1H100F
C0G
50V
10
± 1%
1.00 ± 0.10
CKCA43C0G1H150K
C0G
50V
15
± 10%
1.00 ± 0.10
CKCA43C0G1H220K
C0G
50V
22
± 10%
1.00 ± 0.10
CKCA43C0G1H330K
C0G
50V
33
± 10%
1.00 ± 0.10
CKCA43C0G1H470K
C0G
50V
47
± 10%
1.00 ± 0.10
CKCA43C0G1H680K
C0G
50V
68
± 10%
1.00 ± 0.10
CKCA43C0G1H101K
C0G
50V
100
± 10%
1.00 ± 0.10
CKCA43C0G1H151K
C0G
50V
150
± 10%
1.00 ± 0.10
CKCA43C0G1H221K
C0G
50V
220
± 10%
1.00 ± 0.10
CKCA43C0G1H331K
C0G
50V
330
± 10%
1.00 ± 0.10
CKCA43C0G1H471K
C0G
50V
470
± 10%
1.00 ± 0.10
CKCA43C0G1H681K
C0G
50V
680
± 10%
1.00 ± 0.10
CKCA43C0G1H102K
C0G
50V
1,000
± 10%
1.00 ± 0.10
TDK MLCC US Catalog
Page 250
Version B11
Capacitance
Range Table
CKCA43 [EIA CC1206]
Class 2 (Temperature Stable)
Temperature Characteristics: X7R (-55 to +125ºC, ±15%), X5R (-55 to +85ºC, ±15%)
TDK Part Number
(Ordering Code)
Temperature
Characteristics
Rated
Voltage
Capacitance
(pF)
Capacitance
Tolerance
Thickness
(mm)
CKCA43X7R1H471M
X7R
50V
470
± 20%
1.00 ± 0.10
CKCA43X7R1H102M
X7R
50V
1,000
± 20%
1.00 ± 0.10
CKCA43X7R1H222M
X7R
50V
2,200
± 20%
1.00 ± 0.10
CKCA43X7R1H472M
X7R
50V
4,700
± 20%
1.00 ± 0.10
CKCA43X7R1H103M
X7R
50V
10,000
± 20%
1.00 ± 0.10
CKCA43X7R1H223M
X7R
50V
22,000
± 20%
1.00 ± 0.10
CKCA43X7R1E473M
X7R
25V
47,000
± 20%
1.00 ± 0.10
CKCA43X7R1C104M
X7R
16V
100,000
± 20%
1.00 ± 0.10
CKCA43X5R0J105M
X5R
6.3V
1,000,000
± 20%
1.00 ± 0.10
TDK MLCC US Catalog
Page 251
Version B11
General
Specifications
CKC Series – Array Type Capacitors
No.
Item
Performance
Test or Inspection Method
1
External
Appearance
No defects which may affect
performance.
Inspect with magnifying glass (3×).
2
Insulation
Resistance
10,000MΩ min. As for the capacitors of
rated voltage 16, 10, 6.3V DC,
100MΩ•μF min., whichever smaller.
To measure between each terminal.
Apply rated voltage for 60s.
3
Voltage Proof
Withstand test voltage without
insulation breakdown or other damage.
Class
Apply Voltage
Class 1
3 x Rated Voltage
Class 2
2.5 x Rated Voltage
Above DC voltage shall be applied across each
terminal for 1 to 5s.
Charge / discharge current shall not exceed 50mA.
4
Capacitance
Within the specified tolerance.
Class
Measuring
Frequency
Class 1
1MHz±10%
0.5 - 5 Vrms
Class 2
1kHz±10%
1.0±0.2Vrms
Measuring
Voltage
To measure between each terminal.
5
Q
(Class 1)
Q
30pF and over
1,000 min.
Under 30pF
6
7
8
See No.4 in this table for measuring condition.
Rated Capacitance
400+20×C min.
C : Rated capacitance (pF)
Dissipation
Factor
(Class 2)
Rated Voltage (DC)
D.F.
25V, 50V, 100V
0.03 max.
6.3V, 10V, 16V
0.05 max.
Temperature
Characteristics
of Capacitance
(Class 1)
T.C.
Temperature
Characteristics
of Capacitance
(Class 2)
See No.4 in this table for measuring condition.
Temperature coefficient shall be calculated based on
values at 25ºC and 85ºC temperature.
Temperature Coefficient
C0G 0 ± 30 (ppm/ºC)
Capacitance drift within ± 0.2% or
± 0.05pF, whichever larger.
Measuring temperature below 20ºC shall be -10ºC and
-25ºC.
Capacitance Change (%)
Capacitance shall be measured by the steps shown in
the following table after thermal equilibrium is obtained
for each step.
∆C be calculated ref. STEP3 reading
No Voltage Applied
X5R: ± 15%
X7R: ± 15%
Step
Temperature (ºC)
1
Reference temp. ± 2
2
Min. operating temp. ± 3
3
Reference temp. ± 2
4
Max. operating temp. ± 2
Measuring voltage: 0.1, 0.2, 0.5, 1.0Vrms.
TDK MLCC US Catalog
Page 252
Version B11
General
Specifications
CKC Series – Array Type Capacitors
No.
Item
Performance
Test or Inspection Method
9
Robustness of
Terminations
No sign of termination coming off,
breakage of ceramic, or other abnormal
signs.
Reflow solder the capacitors on P.C. board (shown in
Appendix 1 to 3) and apply a pushing force of 5N with
10±1s.
5N
Capacitor
10
Solderability
New solder to cover over 75% of
termination. 25% may have pin holes
or rough spots but not concentrated in
one spot. Ceramic surface of “A
sections” shall not be exposed due to
melting or shifting of termination
material.
P.C. Board
Completely soak both terminations in
solder at 235±5ºC for 2±0.5s.
Solder : H63A (JIS Z 3282)
Flux : Isopropyl alcohol (JIS K 8839)
Rosin (JIS K 5902) 25% solid solution.
A section
11
Vibration
External
appearance
Capacitance
Q (Class 1)
Reflow solder the capacitors on P.C. board (shown in
Appendix 1 to 3) before testing.
No mechanical damage.
Characteristics
Change from the
value before test
Class 1
C0G
±2.5%
Class 2
X5R
X7R
± 7.5 %
Rated
Capacitance
Q
30pF and over
1,000 min.
Under 30pF
Vibrate the capacitor with amplitude of 1.5mm P-P
sweeping the frequencies from 10Hz to 55Hz and back
to 10Hz in about 1min.
Repeat this for 2h each in 3 perpendicular directions.
400+20×C min.
C : Rated capacitance (pF)
D.F. (Class 2)
TDK MLCC US Catalog
Meet the initial spec.
Page 253
Version B11
General
Specifications
No.
Item
12
Temperature cycle
External
appearance
Capacitance
Q (Class 1)
CKC Series – Array Type Capacitors
Performance
Test or Inspection Method
Reflow solder the capacitors on P.C. board (shown in
Appendix 1 to 3) before testing.
No mechanical damage.
Characteristics
Change from the
value before test
Class 1
C0G
±2.5%
Class 2
X5R
X7R
± 25 %
Expose the capacitors in the condition step1 through
step 4 and repeat 5 times consecutively.
Leave the capacitor in ambient conditions for 6 to 24h
(Class 1) or 24±2h (Class 2) before measurement.
Step
Temperature (ºC)
Time (min.)
1
Min. operating temp. ±3
30 ± 3
Rated
Capacitance
Q
2
Reference Temp. ± 2
2–5
3
Max. operating temp. ± 2
30 ± 2
30pF and over
1,000 min.
4
Reference Temp. ± 2
2-5
Under 30pF
400+20×C min.
C : Rated capacitance (pF)
13
D.F. (Class 2)
Meet the initial spec.
Insulation
Resistance
Meet the initial spec.
Voltage
Proof
No insulation breakdown or
other damage.
Moisture Resistance (Steady State)
External
appearance
Capacitance
Q (Class 1)
Reflow solder the capacitors on P.C. board (shown in
Appendix 1 to 3) before testing.
No mechanical damage.
Characteristics
Change from the
value before test
Class 1
C0G
±5%
Class 2
X5R
X7R
± 25 %
Rated
Capacitance
Q
30pF and over
350 min.
10pF and over
under 30pF
275+5/2×C min.
Under 10pF
200+10×C min.
Leave at temperature 40±2ºC, 90 to 95%RH for 500
+24,0h.
Leave the capacitor in ambient conditions for 6 to 24h
(Class 1) or 24±2h (Class 2) before measurement.
C : Rated capacitance (pF)
D.F. (Class 2)
Characteristics
X7R: 200% of initial spec. max.
X5R: 200% of initial spec. max
Insulation
Resistance
1,000MΩ min.
(As for the capacitors of rated
voltage 16, 10, 6.3V DC, 10MΩ•μF
min.)
TDK MLCC US Catalog
Page 254
Version B11
General
Specifications
CKC Series – Array Type Capacitors
No.
Item
14
Moisture Resistance
External
appearance
Capacitance
Q (Class 1)
Performance
Test or Inspection Method
Reflow solder the capacitors on P.C. board (shown in
Appendix 1 to 3) before testing.
No mechanical damage.
Characteristics
Change from the
value before test
Class 1
C0G
±7.5%
Class 2
X5R
X7R
± 25 %
Voltage conditioning (only for class 2):
Voltage treat the capacitor under testing temperature
and voltage for 1 hour.
Rated
Capacitance
Q
30pF and over
200 min.
Under 30pF
100+10/3×C min.
D.F. (Class 2)
Characteristics
X7R: 200% of initial spec. max.
X5R: 200% of initial spec. max.
Insulation
Resistance
500MΩ min. (As for the capacitors of
rated voltage 16, 10, 6.3V DC, 5MΩ•μF
min.)
Life
External
appearance
Capacitance
Q (Class 1)
Charge/discharge current shall not exceed 50mA.
Leave the capacitor in ambient conditions for 6 to 24h
(Class 1) or 24±2h (Class 2) before measurement.
C : Rated capacitance (pF)
15
Apply the rated voltage at temperature 40±2ºC and 90
to 95%RH for 500 +24,0h.
Leave the capacitor in ambient conditions for 24±2h
before measurement.
Use this measurement for initial value.
Reflow solder the capacitors on P.C. board (shown in
Appendix 1 to 3) before testing.
No mechanical damage.
Characteristics
Change from the
value before test
Class 1
C0G
± 3%
Class 2
X5R
X7R
± 25 %
Below the voltage shall be applied at 125±2ºC for
1,000 +48, 0h.
Applied voltage is 1xRV. Some items may be tested at
higher voltage (1.2x, 1.5x or 2xRV).
Charge/discharge current shall not exceed 50mA.
Leave the capacitor in ambient conditions for 6 to 24h
(Class 1) or 24±2h (Class 2) before measurement.
Rated
Capacitance
Q
30pF and over
350 min.
10pF and over
under 30pF
275+5/2×C min.
Under 10pF
200+10×C min.
C : Rated capacitance (pF)
D.F. (Class 2)
Characteristics
X7R: 200% of initial spec. max.
X5R: 200% of initial spec. max.
Insulation
Resistance
1,000MΩ min. (As for the capacitors of
rated voltage 16, 10, 6.3V DC,
10MΩ•μF min.)
Voltage conditioning:
Voltage treat the capacitor under testing temperature
and voltage for 1 hour.
Leave the capacitor in ambient conditions for 24±2h
before measurement.
Use this measurement for initial value.
*As for the initial measurement of capacitors (Class2) on number 8, 11, 12 and 13, leave capacitor at 150 –10, 0°C for 1
hour and measure the value after leaving capacitor for 24±2h in ambient condition.
TDK MLCC US Catalog
Page 255
Version B11
General
Specifications
CKC Series – Array Type Capacitors
Appendix - 1
CKCM25, CKCL22
40 mm
100 mm
c
a
b
p
Appendix - 2
Appendix - 3
CKCL44
CKCA43
40 mm
100 mm
Ø 4.0
Copper
Solder resist
Solder resist
Ø 4.0
Copper
a
a
b
b
c
p
Material: Glass Epoxy (As per JIS C6484 GE4)
P.C. Board thickness: 1.6mm
TDK MLCC US Catalog
p
c
Case Code
Dimensions (mm)
Series
JIS
EIA
a
b
c
p
CKCM25
C1310
CC0504
0.5
0.5
0.36
0.64
CKCL22
C2012
CC0805
0.6
0.6
0.45
1.0
CKCL44
C2012
CC0805
0.6
0.7
0.2
0.5
CKCA43
C3216
CC1206
1.0
0.7
0.3
0.8
Page 256
Version B11
Soldering
Information
CKC Series – Array Type Capacitors
• Recommended Soldering Land Pattern
• Recommended Soldering Profile
CKCM25 & CKCL22
P
Reflow Soldering
Preheating
300
Temp (ºC)
B
C
0
Temp (ºC)
Peak
Temp
A
Manual soldering
(Solder iron)
Soldering Natural
cooling
∆T
Preheating
0
Over 60 sec.
CKCL44 & CKCA43
∆T
Peak Temp time
3sec. (As short as possible)
P
Recommended soldering duration
Temp./
Dura.
A
C
Reflow Soldering
CKCL22
CKCL44
CKCA43
P
0.64
1.0
0.5
0.8
A
0.3
0.4
0.55
0.6 ~ 0.7
B
0.45
0.6
0.6
0.8 ~ 1.0
C
0.3
0.5
0.25
0.4
230 max.
20 max.
260 max.
10 max.
Preheating Condition
Soldering
Method
• Recommended Solder Amount
Excessive
solder
Sn-Pb Solder
Lead-Free Solder
Recommended solder compositions
Sn-37Pb (Sn-Pb solder)
Sn-3.0Ag-0.5Cu (Lead Free Solder)
Unit: mm
CKCM25
Symbol
Duration (sec.)
Solder
B
Type
Reflow Soldering
Peak temp (°C)
Temperature (ºC)
CKCM25, CLCL22,
CKCL44
CKCA43
Reflow soldering
∆T ≤ 150
∆T ≤ 130
Manual soldering
∆T ≤ 150
∆T ≤ 130
Higher tensile
force on the chip
capacitor may
cause cracking.
Maximum amount
Adequate
solder
Insufficient
solder
TDK MLCC US Catalog
Minimum amount
Small solder fillet
may cause
contact failure or
failure to hold the
chip capacitor to
the P.C. board.
Page 257
Version B11
Packaging
Information
CKC Series – Array Type Capacitors
• Carrier Tape Configuration
Bulk
Chips
Bulk
160mm min
160mm min
Leader
Drawing direction
400mm min
• Peel Back Force (Top Tape)
Direction & angle of pull
Top cover tape
Carrier tape
0.05 – 0.7 N
0~15°
• Carrier tape shall be flexible enough to be
wound around a minimum radius of 30mm with
components in tape.
• The missing of components shall be less than
0.1%
• Components shall not stick to the cover tape.
• The cover tape shall not protrude beyond the
edges of the carrier tape not shall cover the
sprocket holes.
Direction of pull force
Bottom cover tape (Paper carrier tape of type 1)
• Chip Quantity Per Reel and Structure of Reel (Paper & Plastic)
Type 1: Paper Carrier Tape & Reel
Type 2: Plastic Carrier Tape & Reel
Top cover tape
Top cover tape
Pitch hole
Pitch hole
Cavity (Chip insert)
Bottom cover tape
Series
CKCM25
CKCL22
CKCL44
CKCA43
Case Code
JIS
C1310
C2012
C2012
C3216
TDK MLCC US Catalog
Cavity (Chip insert)
Paper carrier tape
EIA
CC0504
CC0805
CC0805
CC1206
Plastic carrier tape
Taping
Material
Paper
Paper
Paper
Paper
Chip quantity (pcs.)
φ178mm (7”) reel
φ330mm (13”) reel
4,000
10,000
2,000
Page 258
Version B11
Additional
Information
CKC Series – Array Type Capacitors
• Inside Structure & Material System
A’
A’
B’
B’
B
B
3
A
4
3
5
2
1
1
NAME
MATERIAL
(1)
Ceramic Dielectric
(2)
Internal Electrode
Class 1
Class 2
CaZrO3
BaTiO3
Nickel (Ni)
(3)
Copper (Cu)
(4)
Termination
Nickel (Ni)
(5)
Tin (Sn)
• Environmental Information
• Shape & Dimensions
TDK Corporation established internal product environmental
assurance standards that include the six hazardous substances
banned by the EU RoHS Directive1 enforced on July 1, 2006
along with additional substances independently banned by TDK
and has successfully completed making general purpose
electronic components conform to the RoHS Directive2.
CKCM25 & CKCL22
L
P
T
CKCL44 & CKCA43
L
W
C
1.
Abbreviation for Restriction on Hazardous Substances,
which refers to the regulation EU Directive 2002/95/EC on
hazardous substances by the European Union (EU)
effective from July 1, 2006. The Directive bans the use of
six specific hazardous substances in electric and
electronic devices and products handled within the EU.
The six substances are lead, mercury, cadmium,
hexavalent chromium, PBB (polybrominated biphenyls),
and PBDE (polybrominated diphenyl ethers).
2.
This means that, in conformity with the EU Directive
2002/95/EC, lead, cadmium, mercury, hexavalent
chromium, and specific bromine-based flame retardants,
PBB and PBDE, have not been used, except for
exempted applications.
T
W
P
Case Code
JIS
EIA
L
CKCM25 C1310 CC0504
1.37
CKCL22
CKCL44
CKCA43
2.00
2.00
3.20
C2012 CC0805
C2012 CC0805
C3216 CC1206
TDK MLCC US Catalog
A
5
2
No.
Series
4
C
Dimensions (mm)
T
P
0.66 max
1.00
0.26 min.
0.90 max
1.25
0.85
0.35 min.
1.25
0.85
0.15 min.
1.60
1.00
0.30 min.
W
C
0.10 min.
0.10 min.
0.10 min.
0.15 min.
Page 259
For REACH (SVHC : 15 substances according to ECHA /
October 2008) : All TDK MLCC do not contain these 15
substances.
For European Directive 2000/53/CE and 2005/673/CE :
Cadmium, Hexavalent Chromium, Mercury, Lead are not
contained in all TDK MLCC.
For European Directive 2003/11/CE : Pentabromodiphenyl-ether,
Octabromodiphenyl-ether are not contained in all TDK
MLCC.
Version B11