CNC5L1X7R1E106K160AE 数据手册
MULTILAYER CERAMIC CHIP CAPACITORS
November 2020
MULTILAYER CERAMIC CHIP CAPACITORS
Commercial grade, Soft termination (Low resistance type)
CNC series
CNC5
CNC6
3216 [1206 inch]
3225 [1210 inch]
* Dimensions code: JIS[EIA]
(2/5)
MULTILAYER CERAMIC CHIP CAPACITORS
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using this products.
REMINDERS
1. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home
appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots)
under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality
require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or
property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth
in the each catalog, please contact us.
(1) Aerospace/aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment (excepting Pharmaceutical Affairs Law
classification Class1,2)
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
2.
3.
4.
5.
6.
7.
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection
circuit/device or providing backup circuits in your equipment.
We may modify products or discontinue production of a product listed in this catalog without prior notification.
We provide “Delivery Specification” that explain precautions for the specifications and safety of each product listed in this catalog. We strongly
recommend that you exchange these delivery specifications with customers that use one of these products.
If you plan to export a product listed in this catalog, keep in mind that it may be a restricted item according to the “Foreign Exchange and Foreign Trade Control Law”. In such cases, it is necessary to acquire export permission in harmony with this law.
Any reproduction or transferring of the contents of this catalog is prohibited without prior permission from our company.
We are not responsible for problems that occur related to the intellectual property rights or other rights of our company or a third party when you
use a product listed in this catalog. We do not grant license of these rights.
This catalog only applies to products purchased through our company or one of our company’s official agencies. This catalog does not apply to
products that are purchased through other third parties.
Notice: Effective January 2013, TDK will use a new catalog number which adds product thickness and packaging specification detail.
This new catalog number should be referenced on all catalog orders going forward, and is not applicable for OEM part number
orders.
Please be aware the last five digits of the catalog number will differ from the item description (internal control number) on the
product label.
Contact your local TDK Sales representative for more information.
(Example)
Catalog issued date
Prior to January 2013
January 2013 and later
Catalog number
C1608C0G1E103J(080AA)
C1608C0G1E103J080AA
Item description (on delivery label)
C1608C0G1E103JT000N
C1608C0G1E103JT000N
20201120 / mlcc_commercial_soft_cnc_en.fm
(3/5)
MULTILAYER CERAMIC CHIP CAPACITORS
CNC series
Cl
Br
Soft termination (Low resistance type)
RoHS
REACH Halogen
Free
SVHC-Free
Pb
Lead
Free
Type: CNC5/3216 [1206 inch], CNC6/3225 [1210 inch]
■ SERIES OVERVIEW
TDK multilayer ceramic chip capacitor low resistance type soft termination commercial grade CNC series is a product which conductive resin layers
are included in terminals. It differs from conventional soft termination C series whose overall surface of copper is covered with the resin layers, the
resin layers are covering only board mounting side. As a result, the current can pass outside the resin layers having slightly high resistance and so
low electric resistance has been realized.
■ FEATURES
■ APPLICATIONS
• Low electric resistance by applying the resin layers to only board
mounting side.
• Fail-safe design in battery line.
• Prevention of ceramic body cracks by board bending.
■ SHAPE & DIMENSIONS
■ ELECTRODE STRUCTURE DRAWING
Soft termination
(Conventional type)
W
L
Soft termination
(Low resistance type)
T
Sn
Ni
Conductive resin layer
Cu
G
B
L
W
T
B
G
Body length
Body width
Body height
Terminal width
Terminal spacing
Type
L
W
CNC5
3.20+0.30,–0.20
1.60+0.30,–0.20
CNC6
3.20±0.30
2.50±0.30
Dimensional tolerances are typical values.
The conductive resin layer covers
overall surface of copper.
T
1.60+0.30,–0.20
2.50±0.30
The conductive resin
layer covers only board
mounting side.
Dimensions in mm
B
G
0.30 min.
1.00 min.
0.50 min.
—
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20201120 / mlcc_commercial_soft_cnc_en.fm
(4/5)
MULTILAYER CERAMIC CHIP CAPACITORS
■ CATALOG NUMBER CONSTRUCTION
CNC
6
P
1
X7R
1E
226
M
250
A
E
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(1) Series
(2) Dimensions L x W (mm)
Dimensions
code
5
6
EIA
Length
Width
Terminal width
CC1206
CC1210
3.20
3.20
1.60
2.50
0.30
0.50
(3) Thickness code
Code
L
P
Thickness
1.60mm
2.50mm
(7) Nominal capacitance (pF)
The capacitance is expressed in three digit codes and in units of
pico Farads (pF). The first and second digits identify the first and
second significant figures of the capacitance. The third digit identifies the multiplier. R designates a decimal point.
(Example)0R5 = 0.5pF
101 = 100pF
225 = 2,200,000pF = 2.2µF
(8) Capacitance tolerance
(4) Voltage condition for life test
Code
K
M
Symbol
1
(9) Thickness
Condition
1 x R.V.
Code
160
250
(5) Temperature characteristic
Temperature
characteristic
X7R
Capacitance change
Temperature range
±15%
–55 to +125°C
(6) Rated voltage (DC)
Code
2A
1N
1H
1E
1C
Voltage (DC)
100V
75V
50V
25V
16V
Tolerance
±10%
±20%
Thickness
1.60mm
2.50mm
(10) Packaging style
Code
A
Style
178mm reel, 4mm pitch
(11) Special reserved code
Code
E
Description
Soft termination
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20201120 / mlcc_commercial_soft_cnc_en.fm
(5/5)
MULTILAYER CERAMIC CHIP CAPACITORS
Capacitance range chart
CNC5/3216 [1206 inch]
Capacitance
(pF)
X7R
1N
(75V)
Code
2,200,000
4,700,000
10,000,000
1H
(50V)
1E
(25V)
1C
(16V)
225
475
106
Standard thickness
1.60mm
■ For details such as the catalog numbers and product size, please refer to the capacitance range table below.
Capacitance range chart
Capacitance
(pF)
X7R
Code
4,700,000
10,000,000
22,000,000
CNC6/3225 [1210 inch]
2A
(100V)
1H
(50V)
1E
(25V)
475
106
226
Standard thickness
2.50mm
■ For details such as the catalog numbers and product size, please refer to the capacitance range table below.
Capacitance range table
Temperature characteristic: X7R (–55 to +125°C, ±15%)
Capacitance Dimensions
2.2µF
4.7µF
10µF
22µF
3216
3216
3225
3216
3225
3225
Catalog number
Capacitance
Thickness
tolerance Rated voltage Edc: 100V Rated voltage Edc: 75V Rated voltage Edc: 50V Rated voltage Edc: 25V Rated voltage Edc: 16V
(mm)
CNC5L1X7R1N225K160AE CNC5L1X7R1H225K160AE
1.60+0.30,–0.20
±10%
CNC5L1X7R1H475K160AE
1.60+0.30,–0.20
±10%
CNC6P1X7R2A475K250AE
CNC6P1X7R1H475K250AE
2.50±0.30
±10%
CNC5L1X7R1E106K160AE CNC5L1X7R1C106K160AE
1.60+0.30,–0.20
±10%
CNC6P1X7R1H106K250AE
2.50±0.20
±10%
CNC6P1X7R1E226M250AE
2.50±0.30
±20%
Click the part numbers for details
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20201120 / mlcc_commercial_soft_cnc_en.fm