CPL2512T1R0M

(1/3) SMD Inductors(Coils) For Power Line(Wound, Magnetic Shielded) Conformity to RoHS Directive CPL Series CPL2512 FEATURES • It delivers low Rdc with high Idc. • It is lead-free compatible. The product contains no lead whatsoever. It is able to withstand high temperature reflows (260°C during the peak) used in lead-free soldering. APPLICATIONS Portable audio visual devices (DSCs, DVCs, etc.) Mobile communication devices (cellular phones, etc.) Information devices (PCs, etc.) PRODUCT IDENTIFICATION CPL 2512 T 100 M (1) (2) (3) (4) (5) (1) Series name SPECIFICATIONS –40 to +105°C [Including self-temperature rise] –40 to +105°C Operating temperature range Storage temperature range RECOMMENDED SOLDERING CONDITIONS REFLOW SOLDERING 300 Withstanding soldering heat condition Peak 260˚C Solderability condition Temperature(˚C) Peak 230˚C 200 Preheating 140 to 180˚C/120s 200˚C 30s (2) Dimensions 2512 2.5× 1.5× 1.2mm (3) Packaging style T Taping (4) Inductance 1R0 100 1µH 10µH (5) Inductance tolerance M ±20% 200˚C 70s 100 PACKAGING STYLE AND QUANTITIES Preheating 100 to 150˚C/120s Packaging style Taping Quantity 2000 pieces/reel Time(s) • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • Please contact our Sales office when your application are considered the following: The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) • All specifications are subject to change without notice. 002-02 / 20090127 / e531_cpl2512.fm (2/3) 1.3 1.2max. SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM/RECOMMENDED PC BOARD PATTERN 2.5±0.2 0.65 1.5 0.65 Dimensions in mm 1.5±0.2 • No polarity Weight:20mg 0.6±0.15 Dimensions in mm 0.6±0.15 ELECTRICAL CHARACTERISTICS Inductance (µH) 1 1.5 2.2 3.3 4.7 6.8 10 ∗1 ∗2 Inductance tolerance (%) ±20 ±20 ±20 ±20 ±20 ±20 ±20 DC resistance (Ω)±30% 0.09 0.12 0.135 0.24 0.36 0.7 0.9 Rated current∗1 (mA)max. 1500 1200 900 730 650 450 300 Rated current∗2 (mA)max. 1300 1000 900 730 650 450 300 Part No. CPL2512T1R0M CPL2512T1R5M CPL2512T2R2M CPL2512T3R3M CPL2512T4R7M CPL2512T6R8M CPL2512T100M Rated current based on inductance variation: Current when inductance decreases by 30% of the initial value due to direct current superimposed characteristics Rated current based on increasing product temperature: Current when temperature of the product reaches +40°C TYPICAL ELECTRICAL CHARACTERISTICS INDUCTANCE vs. FREQUENCY CHARACTERISTICS INDUCTANCE vs. DC SUPERPOSITION CHARACTERISTICS 10 10 Inductance(µH) 100 Inductance(µH) 100 1 0.1 0.1 1 10 100 1 0.1 10 100 1µH 4.7µH 1.5µH 6.8µH 2.2µH 10µH 3.3µH 1000 10000 DC current(mA) Frequency (MHz) 1µH 4.7µH 1.5µH 6.8µH 2.2µH 10µH 3.3µH • All specifications are subject to change without notice. 002-02 / 20090127 / e531_cpl2512.fm (3/3) TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS DC SUPERPOSITION vs. INDUCTANCE DECREASING RATE 10000 0 Inductance decreasing rate(%) –5 Impedance(Ω) 1000 100 10 –10 –15 –20 –25 –30 –35 –40 –45 1 0.1 1 10 100 –50 10 100 Frequency (MHz) 1µH 4.7µH 1.5µH 6.8µH 2.2µH 10µH 1000 10000 DC current(mA) 3.3µH 1µH 4.7µH 1.5µH 6.8µH 2.2µH 10µH 3.3µH • All specifications are subject to change without notice. 002-02 / 20090127 / e531_cpl2512.fm