C A P A C I T O R S
Disc type capacitors with leads
High voltage ceramic capacitors, commercial grade, safety standard approved
REACH
SVHC-Free
RoHS
Cl
Br
Pb
Halogen
Free
Lead
Free
CS series
FEATURES
Compliant with IEC and the safety standards of various countries.
Withstand voltage is 2,600V AC.
Flame-resistant reinforced outer insulation prevents fires, electrical shock, and other potential hazards.
Compatible with halogen-free external resin coating.
APPLICATION
Y capacitor for AC adapter, charger, power supplies
PART NUMBER CONSTRUCTION
CS
80
ZU
2GA
222
M
Y
□
K
A
Series
name
Type
Temperature
characteristics
Rated voltage
Nominal
capacitance
Capacitance
tolerance
Internal
control
code
Lead-wire
type
Application
classification
Internal
code
45
65
70
75
80
85
95
11
14
SL
+350 to
–1,000ppm/°C
-B
±10%
ZU
(Z5U)
+22, –56%
-F
+30, –80%
2GA
X1:440V AC
Y2:300V AC
100
10pF
J
±5%
G
Long lead
221
220pF
K
±10%
N
Short lead
M
±20%
V
Taping
472 4,700pF
Safety
standard
approved
K
A
Halogen-free
Please refer to P-3 about the product dimensions.
OPERATING TEMPERATURE RANGE
Temperature characteristics
Operating temperature (°C)
Storage temperature (°C)
SL
–40 to +125
–40 to +125
B
–40 to +125
–40 to +125
ZU (Z5U)
–40 to +125
–40 to +125
F
–40 to +125
–40 to +125
The maximum operating temperature of +125°C includes capacitor self-generated heat of up to 20°C.
After capacitor is mounted on board, the storage temperature range is applied.
STANDARD LEAD-WIRE SHAPES
Dimemsions in mm
D*1
D*1
T
4max.
4max.
Symbol V : Taping
*2
*2
25min.
Vertical kink
F
T
4max.
T
F
5±1
D*1
Symbol N : Bulk/short leads
*2
16+1.5
–0.5
Symbol G : Bulk/long leads
ø0.6±0.05
F
ø0.6±0.05
ø0.6±0.05
TDK’s standard product is vertical kink. TDK recommends short leads for bulk products.
*1 Body diameter (D) is reference value if D is smaller than maximum dimension of lead to lead distance (F).
*2 Coating on leads shall not extend beyond the bottom of vertical kink.
RoHS Directive Compliant Product: See the following for more details. https://product.tdk.com/en/environment/rohs/index.html
Halogen-free: Indicate that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(1/5)
20221226
leaddisc_commercial_cs_en.fm
C A P A C I T O R S
Overview of CS series
CERTIFIED STATUS OF VARIOUS COUNTRIES
Safety
standard
IEC standard No.
Standard No.
BSI
BS EN 60384-14
IEC 60384-14
BS EN 60065
(8.8, 14.2)
BS EN 60384-14
VDE
SEV
SEMKO
NEMKO
DEMKO
FIMKO
IMQ
SAA
CSA
UL
CQC
Temperature
Sub-class
characteristics
Rated
voltage
KM37103
EN 60384-14
X1,Y2
X1:440V AC
Y2:300V AC
X1
Y2
440V AC
300V AC
SL,B,Z5U,F
IEC 60384-14
AS3250
CSA-E60384-14
UL60384-14
GB/T14472-1998
KTL
Approval report No.*
Taiwan
Xiamen
K60384-14
40017930
19.0043
1910408
P19223652
D-04986
FI 140177
V3692
CS6268
1785515
E37861
CQC12001082619 CQC10001052862
SZ03001-12006
SU03047-12006
SZ03001-12008
SU03047-12008
* Certificate numbers shall be changed owing to the revisions of the related standards and renewal of certificate.
RECOMMENDED FLOW PROFILE
Soldering
Preheating
Natural
cooling
T: Temperature
T2
T1
t1
t2
t3
t: Time
Preheating
Temp.
T1
100 to 120°C
Time
t1
30 to 60s.
Peak
Temp.
T2
260°C
Time
t2
Within 10s.
Natural cooling
Time
t3
Over 60s.
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and product temperature
does not exceed 150°C.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(2/5)
20221226
leaddisc_commercial_cs_en.fm
C A P A C I T O R S
CS series
MARKINGS
Item
1.Series
2.Nominal capacitance
3.Capacitance tolerance
4.Rated voltage Eac
Markings
CS
222
M
440∼X1
300∼Y2
Description
CS series
2,200pF
±20%
X1: 440V AC
Y2: 300V AC
Production base code
2022.04
5.TDK’s trademark
6.Date code
24
Marking examples
CS222M
24
(Marking position is reference.)
Year
The
and month of production: last digit of year + month denoted by 1, 2, 3, 4, 5, 6, 7, 8, 9, O (October), N (November), or D (December).
expression has become simplified due to a revision in the standards.
RATED VOLTAGE Eac: X1:440V、Y2:300V
CAPACITANCE AND DIMENSIONS
Dimensions (mm)
Temperature
Capacitance
characteristics
Capacitance
tolerance
Dmax. * Tmax.
SL
SL
SL
SL
SL
SL
B
B
B
B
B
B
Z5U
Z5U
Z5U
Z5U
Z5U
F
±5 %
±5 %
±5 %
±5 %
±5 %
±5 %
±10 %
±10 %
±10 %
±10 %
±10 %
±10 %
±20 %
±20 %
±20 %
±20 %
±20 %
±20 %
(7.0)
(7.0)
(7.0)
(7.0)
(7.0)
(7.5)
(7.0)
(7.0)
(7.0)
(7.0)
(7.5)
8.5
(7.0)
(7.5)
(8.0)
9.5
10.5
14.5
10 pF
15 pF
22 pF
33 pF
47 pF
68 pF
100 pF
150 pF
220 pF
330 pF
470 pF
680 pF
1000 pF
1500 pF
2200 pF
3300 pF
4700 pF
10000 pF
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
Part numbers
F
(applied
to bulk)
7.5±1.5
7.5±1.5
7.5±1.5
7.5±1.5
7.5±1.5
7.5±1.5
7.5±1.5
7.5±1.5
7.5±1.5
7.5±1.5
7.5±1.5
7.5±1.5
7.5±1.5
7.5±1.5
7.5±1.5
7.5±1.5
7.5±1.5
7.5±1.5
F
(applied
to taping)
7.5±0.8
7.5±0.8
7.5±0.8
7.5±0.8
7.5±0.8
7.5±0.8
7.5±0.8
7.5±0.8
7.5±0.8
7.5±0.8
7.5±0.8
7.5±0.8
7.5±0.8
7.5±0.8
7.5±0.8
7.5±0.8
7.5±0.8
7.5±0.8
Bulk/long leads
(Symbol: G)
Bulk/short leads
(Symbol: N)
Taping
(Symbol: V)
CS45SL2GA100JYGKA
CS45SL2GA150JYGKA
CS45SL2GA220JYGKA
CS45SL2GA330JYGKA
CS45SL2GA470JYGKA
CS45SL2GA680JYGKA
CS65-B2GA101KYGKA
CS65-B2GA151KYGKA
CS65-B2GA221KYGKA
CS70-B2GA331KYGKA
CS75-B2GA471KYGKA
CS85-B2GA681KYGKA
CS65ZU2GA102MYGKA
CS75ZU2GA152MYGKA
CS80ZU2GA222MYGKA
CS95ZU2GA332MYGKA
CS11ZU2GA472MYGKA
CS14-F2GA103MYGKA
CS45SL2GA100JYNKA
CS45SL2GA150JYNKA
CS45SL2GA220JYNKA
CS45SL2GA330JYNKA
CS45SL2GA470JYNKA
CS45SL2GA680JYNKA
CS65-B2GA101KYNKA
CS65-B2GA151KYNKA
CS65-B2GA221KYNKA
CS70-B2GA331KYNKA
CS75-B2GA471KYNKA
CS85-B2GA681KYNKA
CS65ZU2GA102MYNKA
CS75ZU2GA152MYNKA
CS80ZU2GA222MYNKA
CS95ZU2GA332MYNKA
CS11ZU2GA472MYNKA
CS14-F2GA103MYNKA
CS45SL2GA100JYVKA
CS45SL2GA150JYVKA
CS45SL2GA220JYVKA
CS45SL2GA330JYVKA
CS45SL2GA470JYVKA
CS45SL2GA680JYVKA
CS65-B2GA101KYVKA
CS65-B2GA151KYVKA
CS65-B2GA221KYVKA
CS70-B2GA331KYVKA
CS75-B2GA471KYVKA
CS85-B2GA681KYVKA
CS65ZU2GA102MYVKA
CS75ZU2GA152MYVKA
CS80ZU2GA222MYVKA
CS95ZU2GA332MYVKA
CS11ZU2GA472MYVKA
CS14-F2GA103MYVKA
The values in parentheses "( )" are reference values.
Reference value is applied to bulk product.
Click the part number for details.
● Please refer to p-4 about the taping dimemsions.
• For more information about products with other capacitance or other data, please contact us.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(3/5)
20221226
leaddisc_commercial_cs_en.fm
C A P A C I T O R S
CS series
TAPING DIMENSIONS
P
T
D*1
P2
h
F
C*2
S
t
W0
W
L
W1
H0
P1
W2
H0
A
h
P0
D0
ød
Item
Symbols
Dimensions (mm)
Body diameter
D
Refer to P-3
Body thickness
Lead-wire diameter
Pitch of component
Feed hole pitch
Feed hole center to lead-wire
Feed hole center to component center
Lead-to lead distance
Component alignment
Carrier tape width
Adhesive tape width
Hole position
Adhesive tape position
Bottom of kink from tape center
Lead-wire protrusion
Feed hole diameter
Carrier tape thickness
(Including adhesive tape)
Length of snipped lead-wire
Coating on lead-wire
Height of kink
Spring action
T
ød
P
P0
P1
P2
F
h
W
W0
W1
W2
H0
D0
Refer to P-3
0.6±0.05
15.0±1.0
15.0±0.3
3.75±0.7
7.5±1.3
7.5±0.8
0±2.0
18.0+1.0,–0.5
10.0 Min.
9.0±0.5
4.0 Max.
16.0+1.5,–0.5
1.0 Max.
4.0±0.2
t
0.6±0.3
Including adhesive tape
L
C
A
S
11.0 Max.
4.0 Max.
4.0 Max.
2.0 Max.
*2 Coating on leads shall not extend beyond the bottom of vertical kink.
Measuring point is bottom kink
AMMO PACK INNER BOX SIZE
Remarks
*1 Body diameter (D) is reference value if D is smaller than maximum
dimension of lead to lead distance (F).
Including the slant of body
Excepting the tape splicing part
Including the slanting body due to bending lead-wire
Measuring point is bottom kink
Including the slanting body due to bending lead-wire
Adhesive tape do not stick out the tape
PACKAGE QUANTITY
Package quantity
Type
Taping (pieces / box)
1000
1000
320max.
CS
Bulk (pieces / bag)
x.
ma
340max.
60
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(4/5)
20221226
leaddisc_commercial_cs_en.fm
C A P A C I T O R S
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using this products.
REMINDERS
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and product temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society,
person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
Please refer to the guideline of notabilia for fixed ceramic capacitors issued by JEITA(Japan Electronics and Information Technology
Association, EIAJ RCR-2335).
This guideline describes general precautions* for using fixed ceramic capacitors. Please carefully confirm it and use capacitors safely.
* Items for check, explanation/reason/concrete example and failure examples, etc.
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(5/5)
20221226
leaddisc_commercial_cs_en.fm