Discover TDK Solutions
Discover TDK Solutions
RF Components for Wireless Applications
RF Components for Wireless Applications
For Samples, Datasheets and Additional Product Information
on these and other TDK Wireless Solutions . . .
TDK RF Components & Services :
TDK Corporation of America
1221 Business Center Drive, Mount Prospect, IL 60056
Phone: +1 (847) 803-6100
Fax: +1 (847) 803-1125
Email: wirelessinfo@tdktca.com
Visit our website: www.component.tdk.com
D
i
s
c
o
v
e
r
www.component.tdk.com
●
●
●
●
●
●
T
D
K
D
i
Band Pass Filters
Diplexers
Low Pass Filters
Couplers
High Frequency Inductors
Circulators/ Isolators
s
c
o
●
●
●
●
●
●
Baluns
Antennas
High Pass Filters
Test Services
Test Equipment
Anechoic Chambers
v
e
r
www.component.tdk.com
T
D
K
TDK Services for UWB Wireless Systems
Table of Contents
TDK Test & Measurement Solutions for Your UWB Wireless System
UWB-EMC Test System
UWB-EMC test system (for test and measurement of radiated emission from UWB radio) Ultra wide frequency measurement required FCC compliance test.
Ultra wide dynamic ranges for UWB test which radiate very
low power emission.
TDK’s original anechoic chamber, antenna, and software
based test system.
Possible to upgrade your EMC test systems to state-of-theart UWB-EMC test system.
3m chamber (FCC comply, 9x6x5.7m)
Compact chamber (FCC comply, 7x4x3m)
TDK’s original hybrid anechoic chamber
Test system for measurement up to 40GHz
Hardware, software, & training are included
TDK Offers Complete Turnkey Systems of Anechoic Chambers
TDK offers a "single vendor" solution for test facilities by offering both systems and test chambers. Offering a TDK line of turnkey 3 meter, 5 meter, 10 meter, and compact anechoic chamber solutions based on top-performing TDK absorber technologies.
Each facility is built with high-performance radio wave absorbing materials selected specifically to match your test requirements
and manage the implementation of both systems and chambers to deliver a turnkey test facility that is tightly integrated.
Anechoic chambers for EMC Testing:
3m type (FCC comply, 9x6x5.7m) or compact type (FCC comply,7x4x3m)
TDK’s high performance electromagnetic absorber material
(IB-015 and IP-045 absorber)
Automatically controlled turntable and antenna mast via optical fiber.
Normalized Site Attenuation (NSA) measurement for compliance.
D
i
s
c
o
TDK offers a series of RF components for many wireless applications.
From filters and antennas to test services and anechoic chambers solutions,
TDK has a solution for you.
● WLAN SOLUTIONS
PAGE
04
● BLUETOOTH SOLUTIONS
PAGE
08
● WiMAX Solutions
Page
10
● UWB SOLUTIONS
PAGE
13
Anechoic Chamber for Antenna Testing
Anechoic chamber (compact type, 7x4x4m)
TDK’s high performance electromagnetic absorber material (IS-060 absorber)
TDK’ original oblique incident absorber, IS-SM050, for exceptional absorption
performance
Quiet zone (QZ) measurement
v
e
r
www.component.tdk.com
18
T
D
K
D
i
s
c
o
v
e
r
www.component.tdk.com
T
D
K
RF Components for WLAN Applications
TDK WLAN components provide leading edge miniaturization technology while
providing exceptional electrical characteristics. TDK RF Components are
recommended by leading WLAN chipset manufacturers.
The following pages list our standard BPF’s, LPF’s, HPF’s, diplexers and baluns
for 2.4GHz & 5GHz WLAN.
TDK Services for UWB Wireless Systems
TDK Compliance Test Services & Expertise For UWB Wireless Systems
TDK’s advanced wireless radio testing services have been used by leading UWB chipset companies for both,
FCC compliance and UWB transceiver development. TDK provides complete regulatory compliance testing,
report preparation and submission.
Let TDK work with you to develop test and measurement solution for your Certified Wireless USB products.
TDK Test Labs
located in
Austin & Tokyo
TDK supports the complete FCC submission process.
Please contact TDK for evaluation samples and detailed specifications.
Diplexer for 2.4GHz & 5GHz
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Start
Frequency
MHz
Stop
Frequency
MHz
Insertion Loss
dB (MAX)
Size
mm (typ.)
Part Number
2300
2500
0.65
4900
5950
1.4
2.0x1.25x0.95
DPX205950DT-9008A1
2300
2500
0.65
4900
5950
1.4
2.0x1.25x0.95
DPX205950DT-9018A1
2400
2500
0.5
4900
5850
0.75
2.0x1.25x0.95
DPX205850DT-4027B1
D
i
s
c
o
v
e
r
www.component.tdk.com
3D radiation pattern of typical dipole antenna.
FCC granted UWB transceiver
General Atomics: AEVK-1
Wisair: DV9100
T
D
K
UWB transceiver testing requires measurements spanning
wide frequency and dynamic ranges. TDK provides FCC
compliance testing using specialized instrumentation and
an optimized facility to provide test reports.
D
i
s
c
o
Antenna performance is an important part of the UWB solution.
TDK performs antenna analysis for high performance Certified
Wireless USB transceiver development.
v
e
r
www.component.tdk.com
17
T
D
K
TDK RF Components for UWB Applications
TDK Balanced Antenna for Use in UWB Applications
TDK has developed a multilayer chip antenna with a patented balanced radiator structure. The
antenna’s unique structure allows it to maintain similar performance regardless of ground plane
size. Unlike monopole antennas, which are dependent on ground plane size, this antenna has
been designed for ease of integration in various applications without the worry of complex
board re-designs. It is ideal for use in CardBus, CompactFlash or USB designs.
RF Components for WLAN Applications
Multilayer Band Pass Filter for 2.4GHz
Start
Frequency
MHz
2400
Stop
Frequency
MHz
2500
2300
2500
2400
There is a significant difference in ground plane
size but almost no difference in VSWR results.
The antenna bandwidth is not detuned by
changing the ground plane size.
Attenuation (MIN.)
Ins. Loss
dB (MAX)
MHz
dB
MHz
dB
MHz
dB
Size
mm (typ.)
Part No.
1.2
915
35
1910
35
4800
30
2.5X2.0X0.9
DEA252400BT-2027A1
1.4
915
35
1910
35
4800
30
2.5X2.0X0.9
DEA252450BT-2030A1
2500
1.5
915
35
2100
20
4800
23
2.5X2.0X0.9
DEA252450BT-2031A1
2400
2500
2.1
915
45
2170
20
4800
30
2.5X2.0X0.9
DEA252450BT-2024C1
2400
2300
2400
2400
2400
2400
2300
2400
2400
2400
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
3.2
3.0
3.0
1.5
1.5
2.9
2.0
2.0
2.5
3.0
800
960
960
1900
1300
960
915
915
915
1250
40
50
50
30
25
40
25
25
25
30
2170
1990
1990
23
48
40
4800
2170
2170
25
22
33
3600
2170
1910
1910
1910
1900
30
16
25
20
20
20
4800
4800
4800
4800
4800
4800
34
30
20
20
25
25
2.0X1.2X0.65
2.5X2.0X0.9
2.5X2.0X0.9
2.5X1.2X0.95
2.0X1.2X0.9
2.0X1.2X0.65
1.6X0.8X0.6
1.6X0.8X0.55
1.6X0.8X0.55
1.6X0.8X0.6
DEA252450BT-2068A1
DEA252450BT-2024C2
DEA252450BT-2024D4
DEA252450BT-1251A1
DEA252450BT-1213C1
DEA252450BT-2038A5
DEA162450BT-1241A1
DEA162450BT-1247B1
DEA162450BT-1247C1
DEA162450BT-1210A1
Low Pass Filter
Start
Frequency
MHz
2400
Stop
Frequency
MHz
2500
2300
2500
Attenuation (MIN.)
Ins. Loss
dB (MAX)
MHz
dB
MHz
dB
MHz
dB
Size
mm (typ.)
Part No.
0.42
4800
25
5000
25
7200
18
1.6X0.8X0.6
DEA162500LT-1212A1
0.48
4800
35
5000
35
7200
25
1.6X0.8X0.6
DEA162500LT-1217A1
Ins. Loss
dB (MAX)
MHz
dB
MHz
dB
MHz
dB
Size
mm (typ.)
Part No.
0.75
920
25
1790
17
1915
20
2.0X1.2X1.0
DEA202484HT-8002A1
1.4
920
25
1790
18
1915
18
1.6X0.8X0.6
DEA162400HT-8004B1
High Pass Filter
Electrical Specifications
Parameter
Operation Frequency
Polarization
Antenna Gain
Impedance
VSWR
Value
Unit
3.1—5.2
Linear (Mixed)
2.0 (typ.)
50
3 (Max)
GHz
None
dBi
ohm
None
Start
Frequency
MHz
2400
Stop
Frequency
MHz
2484
2400
2500
Attenuation (MIN.)
Sample Specification : DEA252450BT-2024C2
Mechanical Dimensions (unit: mm)
Radiation Patterns
Electrical Characteristics at 25deg C
Contact TDK for full spec sheets and application notes
D
i
s
c
o
v
e
r
www.component.tdk.com
16
T
D
K
No.
Parameter
Freq. (MHz)
1
2
3
4
5
6
7
Insertion Loss
Return Loss
Attenuation
Attenuation
Attenuation
Attenuation
Attenuation
2400-2480
2400-2480
880-960
1565-1585
1710-1880
1930-1990
2110-2170
D
i
s
Specification
Min. Max. TYP
—
3.0 2.29
10.0
—
13.7
50.0
—
53.8
50.0
—
54.7
48.0
—
58.3
48.0
—
65.5
22.0
—
33.6
c
o
Unit
dB
dB
dB
dB
dB
dB
dB
v
e
r
www.component.tdk.com
T
D
K
RF Components for WLAN Applications
Multilayer Band Pass Filter for 5GHz (Wide Band)
Attenuation (MIN.)
Ins. Loss
dB (MAX)
MHz
dB
2.2
3450
5900
1.5
4900
5950
4900
4900
4940
Mechanical Dimensions
Size
mm (typ.)
Part No.
35
1.6X0.8X0.6
DEA165487BT-1202
3450
35
2.0X1.2X0.9
DEA205437BT-1200
1.5
3450
25
9800
17
2.0X1.2X0.9
DEA205425BT-1209B2
5950
2.0
3300
40
4000
25
7300
14
2.0X1.2X0.95
DEA205425BT-2028A4
5850
5850
1.2
3.5
824
2700
50
40
1910
4650
50
24
9800
7250
15
39
2.5X2.0X0.9
2.5X2.0X1.0
DEA255375BT-2076A1
DEA255395BT-2065D2
MHz
dB
MHz
dB
Balun Example : unbalanced 50Ω to balanced 100Ω
2.0 ± 0.15
HHM 1583B1
Pin Configuration:
1.
2.
3.
4.
5.
6.
Low Pass Filter
Start
Frequency
MHz
5125
4900
Stop
Frequency
MHz
5725
5950
Attenuation (MIN.)
Ins. Loss
dB (MAX)
MHz
dB
MHz
dB
MHz
dB
1.5
0.7
6800
9800
12
20
10250
11900
25
30
11450
25
Size
mm (typ.)
Part No.
1.6X0.8X0.8
1.6X0.8X0.8
DEA165725LT-1196A2
DEA165850LT-1197B2
Bal. Imped.
ohm
MHz
dB
MHz
2.8
100
4000
30
8000
Sample Specification : DEA255425BT-2028A4
dB
Part No.
20
2.0X1.5X1.3
DEA215425BT-7075C2
Parameter
Specification
Min. Max. TYP
—
—
—
—
1.6
2.0
Freq. (MHz)
1 Center Frequency
5425
2
Insertion Loss
4900-5950
Insertion Loss
3
4900-5950
-40 ~ +85 °C
4
Return Loss
4900-5950
5
Attenuation
1280-3300
6
Attenuation
3300-4000
7
Attenuation
4375-4465
8
Attenuation
7300-8930
9
Attenuation
9800-11900
2
3
0.95
±
0.1
(Bottom View)
Unit: mm
<
>
<
>
<
>
0.05 ± 0.2 0.2 ± 0.2
0.3 ± 0.2
Amplitude Balance
0
-5
Electrical Characteristics at 25deg C
No.
1
0.15
3
Size
mm (typ.)
Return Loss [dB]
Ins. Loss
dB (MAX)
4
±
Unbalanced Port
GND or DC feed
Balanced Port
Balanced Port
GND
N.C.
Return Loss
Attenuation (MIN.)
5
0.35 ± 0.2
3100.0 MHz
-17.06 dB
4000 MHz
-35.20 dB
4900 MHz
- 20.65 dB
-10
-15
-20
-25
-30
1.9
2.3
dB
9
40
25
7
14
25
11
50
33
12
18
38
—
—
—
—
—
—
dB
dB
dB
dB
dB
dB
0
-1
-3
3000
—
dB
—
1
-2
-35
-45
2500
Unit
3100.0 MHz
-0.10 dB
4000 MHz
-0.27 dB
4900 MHz
- 0.68 dB
2
-40
3500
4000
4500
Frequency [MHz]
5000
2500
5500
3000
3500
4000
4500
Frequency [MHz]
5000
5500
200
0.0
3100.0 MHz
-0.44 dB
4000 MHz
-0.35 dB
4900 MHz
- 0.53 dB
-0.5
Return Loss [dB]
Stop
Frequency
MHz
5950
6
1.25
Balanced Output
100 ohm
Unbalanced Input
50 ohm
Balanced Output Multilayer Band Pass Filter
Start
Frequency
MHz
4900
(Top View)
0.25 ±0.1/0.2
5150
TDK Baluns for UWB Applications
Amplitude [dB]
Stop
Frequency
MHz
5900
-1.0
-1.5
-2.0
Phase Balance [dB]
Start
Frequency
MHz
5150
TDK RF Components for UWB Applications
-2.5
-3.0
2500
3100.0 MHz
176.69 deg
4000 MHz
175.64 deg
4900 MHz
182.12 deg
190
180
170
160
3000
3500
4000
4500
Frequency [MHz]
5000
5500
2500
3000
3500
4000
4500
Frequency [MHz]
5000
5500
Electrical Characteristics at 25 degC
D
i
s
c
o
v
e
r
www.component.tdk.com
T
D
K
No.
PARAMETER
FREQ (MHz)
1
Insertion Loss (Lo-Band Port)
2300-2500
2
Insertion Loss (Hi-Band Port)
3
Return Loss (ANT Port)
4
SPEC
UNIT
Min.
Max.
_
1.2
dB
3168-4572
_
1.7
dB
2300-2500
10.0
_
dB
Return Loss (ANT Port)
3168-4572
4.5
5
Attenuation (Hi-Band Port)
2300-2500
20.0
_
dB
6
Attenuation (Lo-Band Port)
3168-4572
20.0
_
dB
D
i
s
c
o
v
e
r
www.component.tdk.com
15
dB
T
D
K
TDK RF Components for UWB Applications
RF Components for WLAN Applications
TDK Band Pass Filters for UWB Applications
TDK Band Pass Filters for UWB are available in a performance and a reduced footprint version.
The performance version is for applications requiring maximum attenuation at 2.4GHz and 5GHz
applications. Reduced footprint series is for applications requiring minimum attenuation.
DEA-3002B1
Performance
Series
Reduced
Footprint Series
[MECHANICAL DIMENSIONS]
Balun Transformers for 2.4GHz
Start
Frequency
MHz
2400 (2300)
Stop
Frequency
MHz
2500
2400 (2300)
2500
2400 (2300)
2500
2400 (2300)
Ins. Loss
dB (MAX)
Bal. Imed.
ohm
Amp. Bal dB
(MAX)
Phase Bal Deg
Size
mm (typ.)
Part No.
1.2
50
2.0
180+/- 10
2.0X1.2X0.95
HHM157(A2)
1.0
75
1.5
180+/- 10
2.0X1.2X0.95
HHM1541E1(E2)
1.0
100
2.0
180+/- 10
2.0X1.2X0.95
HHM1520(A2)
2500
1.0(1.1)
200
2.0
180+/- 10
2.0X1.2X0.95
HHM1521(A2)
2400
2500
1.2
50
2.0
180+/- 10
1.6X0.8X0.6
HHM1711D1
2400
2500
1.2
100
2.0
180+/- 10
1.6X0.8X0.6
HHM1711D1
2400
2500
1.0
100
1.5
180+/- 10
1.6X0.8X0.6
HHM1711N1
2400
2500
1.2
150
2.0
180+/- 10
1.6X0.8X0.6
HHM1712D1
2400
2500
1.2
200
1.7
180+/- 10
1.6X0.8X0.6
HHM1713E2
2400
2500
1.0
50
2.0
180+/- 10
1.0X0.5X0.45
HHM1902A1
2400
2500
1.0
100
2.0
180+/- 10
1.0X0.5X0.45
HHM1903A1
Part No.
Balun Transformers for 5GHz (Wide Band)
Electrical Characteristics at (T=30°C to 85°C, ZL=50Ω)
Parameter
Freq. (MHz)
Insertion Loss (T=25°C)
Insertion Loss (T=30°C to 85°C)
Input Return Loss
Attenuation
Attenuation
Attenuation
Attenuation
Attenuation
3168-4752
3168-4752
3168-4752
DC-2200
2200-2500
5151-5300
5300-7000
7000-14000
Specification
Min.
Max.
TYP
1.9
2.2
10
30
26
23
26
15
Electrical Characteristics Ta=25°C
Unit
dB
dB
dB
dB
dB
dB
dB
dB
No.
Parameter
Freq. (MHz)
Specification
Unit
1
2
Insertion Loss
3.168-4.752
2.0 max
dB
Return Loss
3.168-4.752
10 min
dB
3
Attenuation
DC-2.4
25 min
dB
4
Attenuation
2.5
25 min
dB
5
6
Attenuation
Attenuation
5.15-7.0
7.0-14.5
20 min
15 min
dB
dB
Frequency Characteristic
Frequency Characteristic
Start
Frequency
MHz
5150
Stop
Frequency
MHz
5875
4900
5950
4900
Ins. Loss
dB (MAX)
Bal. Imed.
ohm
Amp. Bal dB
(MAX)
Phase Bal Deg
Size
mm (typ.)
1.0
100
2.0
180+/- 10
2.0X1.2X0.95
HHM1562B
1.0
100
2.0
180+/- 10
2.0X1.2X0.95
HHM1570B1
5950
1.2
50
1.0
180+/- 10
1.6X0.8X0.6
HHM1733B1
4900
5950
1.0
100
2.0
180+/- 10
1.6X0.8X0.6
HHM1732B1
4900
5950
1.2
200
1.5
180+/- 10
1.6X0.8X0.6
HHM1752A2
Balun Transformers for Local (802.11a)
Start
Frequency
MHz
3400
Stop
Frequency
MHz
4010
3400
3400
Ins. Loss
dB (MAX)
Bal. Imed.
ohm
Amp. Bal dB
(MAX)
Phase Bal Deg
Size
mm (typ.)
Part No.
1.2
50
1.5
180+/- 10
2.0X1.2X0.95
HHM1545
4010
0.8
100
1.5
180+/- 10
2.0X1.2X0.95
HHM1594A1
3925
1.2
200
1.0
180+/- 10
1.6X0.8X0.6
HHM1548E1
UWB-Typical Data (De-embedded)
0
-10
Gain (dB)
-20
-30
-40
-50
-60
500
1500
2500
3500
4500
5500
6500
7500
8500
9500
Frquency (MHz)
Please contact TDK for full spec sheets and application notes.
D
i
s
c
o
v
e
r
www.component.tdk.com
14
T
D
K
D
i
s
c
o
v
e
r
www.component.tdk.com
T
D
K
RF Components for Bluetooth Applications
TDK RF Components for UWB Applications
TDK RF components can be used in different architectures (see Example 1 & 2).
Please refer to page 5 for 2.4GHz BPF information and page 7 for 2.4GHz balun
information.
Wireless Ecosystem
TDK RF Components are recommended by leading Bluetooth chipset manufacturers.
TDK has designed a series of Balanced Output BPF’s that are optimized to match the
impedance requirements of Bluetooth IC’s.
The Wireless Ecosystem brings together various technologies required to develop and manufacture advanced
wireless products, systems and equipment. TDK provides key building blocks necessary to bring Certified
Wireless USB, High Data Rate Bluetooth and other UWB products to market.
Balanced impedance can
be optimized to match IC
ANT
Balanced output BPF
TDK components & services for UWB Technology include:
Switch
BPF
Balun
♦
Transceiver
♦
♦
Base band
♦
♦
D
i
s
c
o
v
e
r
www.component.tdk.com
T
D
K
D
Antennas
Baluns
Band Pass Filters
Diplexers
EMI Filters
i
s
♦
♦
♦
♦
♦
c
o
Test Systems
Test Services
Anechoic Chambers
Inductors
Capacitors
v
e
r
www.component.tdk.com
13
T
D
K
TDK RF Components for WiMAX Applications
RF Components for Bluetooth Applications
Ceramic Block Band Pass Filter for 2.3GHz, 2.5GHz, 2.5GHz & 3.5GHz
Start
Frequency
MHz
2490
3230
3390
3590
Stop
Frequency
MHz
2710
3410
3660
3810
MULTILAYER Band Pass Filter (Balance output Type)
P/N: DEA 252450BT-7022B1
Attenuation (MIN.)
Ins. Loss
dB (MAX)
MHz
dB
MHz
dB
MHz
1.2
1.2
1.2
1.2
1800
1800
1800
1800
44
56
58
58
3400
2462
2462
2462
42
45
45
45
4400
4400
4400
4400
dB
Size
mm (typ.)
Part No.
38
37
40
48
8.0X3.0X3.5
8.0X3.0X3.5
8.0X3.0X3.5
8.0X3.0X3.5
S0486A
S0486B
S0486C
S0486D
For Bluetooth and 2.4Ghz W-LAN
MECHANICAL DIMENSIONS
Stop
Frequency
MHz
2700
2900
3100
3400
3600
Ins. Loss
dB (MAX)
Isolation dB
(min)
V.S.W.R.
0=50 ohm (Max)
Max. Handling
Power (W)
0.4
0.4
0.5
Size
mm (typ.)
Part No.
20.0
1.3
20.0
1.25
20.0
20X20X8.5
CU1S2001AC-2600
20.0
20X20X11.5
CU1S2002AC-3000
18.0
1.3
20 (Ave)
20X20X8.0
CU1S2001AC-3500
Parameter
Specification Typical Value Unit
Frequency Range (Pass Band)
2400-2500
—
MHz
Unbalanced Port Characteristics Impedance
50 (nominal)
—
Ω
Balanced Port Characteristics Impedance
100 (nominal)
—
Ω
Unbalanced Port Return Loss
9.5 min
—
dB
+25°C
3.0 max
2.7
dB
Insertion Loss (Pass Band)
-40 — +85°C
3.0 max
3.0
dB
PIN CONFIGURATION
PIN ASSIGNMENT PIN No.
Unbalanced
1
Balanced
4,5
GND
3,6
DC feed or RF GND
2
Circulators for 2.3GHz, 2.5GHz, 2.5GHz & 3.5GHz
Start
Frequency
MHz
2500
Electrical Characteristics
Top View
Ripple (Pass Band)
880-960MHz
1710-1880MHz
1880-1980MHz
Attenuation
2110-2170MHz
4800-5000MHz
Apmlitude Impedence at Balanced Port
+25°C
Phase Differences at Balanced Port
-40 — +85°C
Ceramic Block Band Pass Filter for 700MHz
Start
Frequency
MHz
700
Stop
Frequency
MHz
750
Attenuation (MIN.)
Ins. Loss
dB (MAX)
MHz
dB
MHz
dB
MHz
dB
Size
mm (typ.)
Part No.
2.2
650
30
800
25
1000
40
13.2X10X4
S0465D
1.0 max
48 min
45 min
40 min
25 min
30 min
1.0 max
180±8
180±10
0.2
52
51
54
33
38
-0.2
183
—
dB
dB
dB
dB
dB
dB
dB
Deg
Deg
Front-End Module for 802.16e Mobile WiMAX Applications
• Operating Frequency: 2.5 to 2.7 GHz
• Integrated 25dB Attenuator
• Integrated Output Power Detector
• 50 W Matched RF Ports
• Low Profile LGA Package for Mobile Application: 6.0 x 5.6 x 1.2 mm
• Supports 1X2 (1 TX & 2 RX) Configuration
• Multi-Chip Technology: Integrated Power Amplifier and T/R Switch
• Utilizes TDK’s LTCC Technology to embed all required filtering
For 2.4GHz
Multilayer Balanced Band Pass Filter
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Bal. Imped.
ohm
2400
2500
1.7
2400
2500
2400
RX Balanced BPF
RX2_2G_P
dB
MHz
dB
50
1910
35
4800
30
2.5X2.0X0.9
DEA252450BT-7014D1
1.9
100
1910
35
4800
30
2.5X2.0X0.9
DEA252450BT-7012D1
2500
2.4
50
1920
20
4800
23
2.5X2.0X0.9
DEA252450BT-7001B1
2500
3.0
100
2170
20
4800
30
2.5X2.0X0.9
DEA252450BT-7022B1
2402
2480
3.5
30+j30
2170
23
4800
25
2.5X2.0X0.95
DEA252441BT-7053D2
RX1_2G_P
2400
2500
3.6
34+j72
2170
48
2170
22
2.5X2.0X0.9
DEA252450BT-7035B2
2400
2500
2.7
50
2170
40
2170
33
2.1X1.50X0.9
DEA212450BT-7031A1
2400
2500
3.6
55+j50
2170
2.1X1.50X0.9
DEA212450BT-7043C1
2402
2480
CSR BC4
CSR BC4
2.1X1.25X0.6
DEA202450BT-7041E1
2400
2500
3.4
55+j50
2168
20
2.1X1.25X0.9
DEA202450BT-7089C2
2400
2500
3.5
100
2170
25
2.1X1.25X0.7
DEA202450BT-7054B1
2400
2500
3.5
34+j72
2170
17
2.1X1.25X0.95
DEA202450BT-7077A1
RX1_2G_N
ESD Protection
ANT1
Part No.
MHz
2400
RX Balanced BPF
SPDT
Size
mm (typ.)
RX2_2G_N
ANT2
VCNT1
Attenuation (MIN.)
Power Amplifier with Power Detection
TX Balun
Match to CSR BC4
Bias
TX_2G_P
TX LPF
VCNT2
4800
26
TX_2G_N
VDET
D
i
s
c
o
VCC_PA
VREF
25
VATT
v
e
r
www.component.tdk.com
12
4800
T
D
K
D
i
s
c
o
v
e
r
www.component.tdk.com
T
D
K
TDK RF Components for WiMAX Applications
TDK’s newest line-up of RF Components for WiMAX applications can be used in
both client and base station designs. These components have been developed to
work in the 2.3GHz, 2.5GHz, 3.5GHz and 700MHz bands.
TDK RF Components for WiMAX Applications
Balun Transformers for 2.3GHz, 2.5GHz, 3.5GHz
Start
Frequency
MHz
2300
Stop
Frequency
MHz
2700
2300
2500
Ins. Loss
dB (MAX)
Bal. Imed.
ohm
Amp. Bal dB
(MAX)
Phase Bal Deg
Size
mm (typ.)
Part No.
1.2
50
1.5
180+/- 10
1.6X0.8X0.6
HHM1710J1
2700
1.2
100
1.5
180+/- 10
1.6X0.8X0.6
HHM1711E1
2700
0.8
100
2.2
180+/- 10
1.6X0.8X0.6
HHM1711K1
2500
2700
0.8
100
2.2
180+/- 10
1.6X0.8X0.6
HHM1791A1
3300
3300
3900
3900
1.2
1.0
50
100
1.5
1.2
180+/- 10
180+/- 10
1.6X0.8X0.6
1.6X0.8X0.6
HHM1727D1
HHM1715E1
Multilayer Ceramic Band Pass Filter
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
MHz
dB
MHz
dB
MHz
dB
Size
mm (typ.)
Part No.
2300
2690
1.8
915
30
1800
19
4800
43
2.0X1.25X.95
DEA202495BT-124B2
2496
2690
2.5
960
50
2125
28
4800
33
2.5X2.0X1.0
DEA252593BT-2074A3
2496
2690
1.5
915
50
2125
31
4800
45
2.5X2.0X1.0
DEA252593BT-2079A1
3300
3900
2.2
915
27
2170
27
4800
15
2.0X1.25X.95
DEA203600BT-1230B2
Attenuation (MIN.)
Low Pass Filter
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
MHz
dB
MHz
dB
MHz
dB
Size
mm (typ.)
Part No.
2400
2700
0.4
4800
26
5350
26
7200
23
1.6X0.8X0.6
DEA162700LT-5014A1
3400
3600
0.5
5000
10
5000
30
7200
26
1.6X0.8X0.6
DEA163600LT-5017A1
Attenuation (MIN.)
Multilayer Ceramic Balanced Band Pass Filter
Couplers 2.3GHz, 2.5GHz & 3.5GHz
D
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Coupling
dB
Isolation
dB
V.S.W.R
Size
mm (typ.)
Part No.
2300
2700
0.55
-12 +/- 1.5
20 Min.
1.5
1.6X0.8X0.6
HHM2241SA3
2300
2700
0.40
-20 +/- 1.5
32 Min.
1.3
1.6X0.8X0.6
HHM2233SA7
2300
2700
0.40
-16 +/- 1.5
25 Min.
1.3
1.6X0.8X0.6
HHM2245SA3
3400
3600
0.35
-18 +/- 1.5
23 Min.
1.3
1.6X0.8X0.6
HHM2261SA1
i
s
c
o
v
e
r
www.component.tdk.com
T
Start
Frequency
MHz
2300
Stop
Frequency
MHz
2400
2300
2690
2300
3300
3300
Attenuation (MIN.)
Ins. Loss
dB (MAX)
Bal. Imped.
ohm
MHz
dB
MHz
dB
Size
mm (typ.)
Part No.
2.5
100
1910
39
4800
36
2.5X2.0X1.0
DEA252350BT-7093A1
2.8
50
1910
13
4800
40
2.5X2.0X0.9
DEA212495BT-7055A2
2690
2.5
100
1910
18
4800
23
2.5X2.0X0.9
DEA212495BT-7097A2
3900
3900
2.5
2.5
50
100
1910
1910
49
30
5000
4800
17
13
2.5X2.0X0.9
2.5X2.0X0.95
DEA213600BT-7095A2
DEA213600BT-7095A1
Diplexer
D
K
Start
Frequency
MHz
2300
Stop
Frequency
MHz
2690
2300
2500
D
i
1.6
Start
Frequency
MHz
3300
Stop
Frequency
MHz
3900
2690
1.9
3300
2690
1.2
3300
Ins. Loss
dB (MAX)
s
c
o
Ins. Loss
dB (MAX)
Size
mm (typ.)
Part No.
1.6
2.0X1.25X0.60
DPX203900DT-9019A1
3900
1.7
3.2X2.5X1.2
DPX322600DT-0003
3900
1.3
3.2X2.5X1.2
DPX323600DT-0004
v
e
r
www.component.tdk.com
11
T
D
K
TDK RF Components for WiMAX Applications
TDK’s newest line-up of RF Components for WiMAX applications can be used in
both client and base station designs. These components have been developed to
work in the 2.3GHz, 2.5GHz, 3.5GHz and 700MHz bands.
TDK RF Components for WiMAX Applications
Balun Transformers for 2.3GHz, 2.5GHz, 3.5GHz
Start
Frequency
MHz
2300
Stop
Frequency
MHz
2700
2300
2500
Ins. Loss
dB (MAX)
Bal. Imed.
ohm
Amp. Bal dB
(MAX)
Phase Bal Deg
Size
mm (typ.)
Part No.
1.2
50
1.5
180+/- 10
1.6X0.8X0.6
HHM1710J1
2700
1.2
100
1.5
180+/- 10
1.6X0.8X0.6
HHM1711E1
2700
0.8
100
2.2
180+/- 10
1.6X0.8X0.6
HHM1711K1
2500
2700
0.8
100
2.2
180+/- 10
1.6X0.8X0.6
HHM1791A1
3300
3300
3900
3900
1.2
1.0
50
100
1.5
1.2
180+/- 10
180+/- 10
1.6X0.8X0.6
1.6X0.8X0.6
HHM1727D1
HHM1715E1
Multilayer Ceramic Band Pass Filter
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
MHz
dB
MHz
dB
MHz
dB
Size
mm (typ.)
Part No.
2300
2690
1.8
915
30
1800
19
4800
43
2.0X1.25X.95
DEA202495BT-124B2
2496
2690
2.5
960
50
2125
28
4800
33
2.5X2.0X1.0
DEA252593BT-2074A3
2496
2690
1.5
915
50
2125
31
4800
45
2.5X2.0X1.0
DEA252593BT-2079A1
3300
3900
2.2
915
27
2170
27
4800
15
2.0X1.25X.95
DEA203600BT-1230B2
Attenuation (MIN.)
Low Pass Filter
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
MHz
dB
MHz
dB
MHz
dB
Size
mm (typ.)
Part No.
2400
2700
0.4
4800
26
5350
26
7200
23
1.6X0.8X0.6
DEA162700LT-5014A1
3400
3600
0.5
5000
10
5000
30
7200
26
1.6X0.8X0.6
DEA163600LT-5017A1
Attenuation (MIN.)
Multilayer Ceramic Balanced Band Pass Filter
Couplers 2.3GHz, 2.5GHz & 3.5GHz
D
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Coupling
dB
Isolation
dB
V.S.W.R
Size
mm (typ.)
Part No.
2300
2700
0.55
-12 +/- 1.5
20 Min.
1.5
1.6X0.8X0.6
HHM2241SA3
2300
2700
0.40
-20 +/- 1.5
32 Min.
1.3
1.6X0.8X0.6
HHM2233SA7
2300
2700
0.40
-16 +/- 1.5
25 Min.
1.3
1.6X0.8X0.6
HHM2245SA3
3400
3600
0.35
-18 +/- 1.5
23 Min.
1.3
1.6X0.8X0.6
HHM2261SA1
i
s
c
o
v
e
r
www.component.tdk.com
10
T
Start
Frequency
MHz
2300
Stop
Frequency
MHz
2400
2300
2690
2300
3300
3300
Attenuation (MIN.)
Ins. Loss
dB (MAX)
Bal. Imped.
ohm
MHz
dB
MHz
dB
Size
mm (typ.)
Part No.
2.5
100
1910
39
4800
36
2.5X2.0X1.0
DEA252350BT-7093A1
2.8
50
1910
13
4800
40
2.5X2.0X0.9
DEA212495BT-7055A2
2690
2.5
100
1910
18
4800
23
2.5X2.0X0.9
DEA212495BT-7097A2
3900
3900
2.5
2.5
50
100
1910
1910
49
30
5000
4800
17
13
2.5X2.0X0.9
2.5X2.0X0.95
DEA213600BT-7095A2
DEA213600BT-7095A1
Diplexer
D
K
Start
Frequency
MHz
2300
Stop
Frequency
MHz
2690
2300
2500
D
i
1.6
Start
Frequency
MHz
3300
Stop
Frequency
MHz
3900
2690
1.9
3300
2690
1.2
3300
Ins. Loss
dB (MAX)
s
c
o
Ins. Loss
dB (MAX)
Size
mm (typ.)
Part No.
1.6
2.0X1.25X0.60
DPX203900DT-9019A1
3900
1.7
3.2X2.5X1.2
DPX322600DT-0003
3900
1.3
3.2X2.5X1.2
DPX323600DT-0004
v
e
r
www.component.tdk.com
T
D
K
TDK RF Components for WiMAX Applications
RF Components for Bluetooth Applications
Ceramic Block Band Pass Filter for 2.3GHz, 2.5GHz, 2.5GHz & 3.5GHz
Start
Frequency
MHz
2490
3230
3390
3590
Stop
Frequency
MHz
2710
3410
3660
3810
MULTILAYER Band Pass Filter (Balance output Type)
P/N: DEA 252450BT-7022B1
Attenuation (MIN.)
Ins. Loss
dB (MAX)
MHz
dB
MHz
dB
MHz
1.2
1.2
1.2
1.2
1800
1800
1800
1800
44
56
58
58
3400
2462
2462
2462
42
45
45
45
4400
4400
4400
4400
dB
Size
mm (typ.)
Part No.
38
37
40
48
8.0X3.0X3.5
8.0X3.0X3.5
8.0X3.0X3.5
8.0X3.0X3.5
S0486A
S0486B
S0486C
S0486D
For Bluetooth and 2.4Ghz W-LAN
MECHANICAL DIMENSIONS
Stop
Frequency
MHz
2700
2900
3100
3400
3600
Ins. Loss
dB (MAX)
Isolation dB
(min)
V.S.W.R.
0=50 ohm (Max)
Max. Handling
Power (W)
0.4
0.4
0.5
Size
mm (typ.)
Part No.
20.0
1.3
20.0
1.25
20.0
20X20X8.5
CU1S2001AC-2600
20.0
20X20X11.5
CU1S2002AC-3000
18.0
1.3
20 (Ave)
20X20X8.0
CU1S2001AC-3500
Parameter
Specification Typical Value Unit
Frequency Range (Pass Band)
2400-2500
—
MHz
Unbalanced Port Characteristics Impedance
50 (nominal)
—
Ω
Balanced Port Characteristics Impedance
100 (nominal)
—
Ω
Unbalanced Port Return Loss
9.5 min
—
dB
+25°C
3.0 max
2.7
dB
Insertion Loss (Pass Band)
-40 — +85°C
3.0 max
3.0
dB
PIN CONFIGURATION
PIN ASSIGNMENT PIN No.
Unbalanced
1
Balanced
4,5
GND
3,6
DC feed or RF GND
2
Circulators for 2.3GHz, 2.5GHz, 2.5GHz & 3.5GHz
Start
Frequency
MHz
2500
Electrical Characteristics
Top View
Ripple (Pass Band)
880-960MHz
1710-1880MHz
1880-1980MHz
Attenuation
2110-2170MHz
4800-5000MHz
Apmlitude Impedence at Balanced Port
+25°C
Phase Differences at Balanced Port
-40 — +85°C
Ceramic Block Band Pass Filter for 700MHz
Start
Frequency
MHz
700
Stop
Frequency
MHz
750
Attenuation (MIN.)
Ins. Loss
dB (MAX)
MHz
dB
MHz
dB
MHz
dB
Size
mm (typ.)
Part No.
2.2
650
30
800
25
1000
40
13.2X10X4
S0465D
1.0 max
48 min
45 min
40 min
25 min
30 min
1.0 max
180±8
180±10
0.2
52
51
54
33
38
-0.2
183
—
dB
dB
dB
dB
dB
dB
dB
Deg
Deg
Front-End Module for 802.16e Mobile WiMAX Applications
• Operating Frequency: 2.5 to 2.7 GHz
• Integrated 25dB Attenuator
• Integrated Output Power Detector
• 50 W Matched RF Ports
• Low Profile LGA Package for Mobile Application: 6.0 x 5.6 x 1.2 mm
• Supports 1X2 (1 TX & 2 RX) Configuration
• Multi-Chip Technology: Integrated Power Amplifier and T/R Switch
• Utilizes TDK’s LTCC Technology to embed all required filtering
For 2.4GHz
Multilayer Balanced Band Pass Filter
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Bal. Imped.
ohm
2400
2500
1.7
2400
2500
2400
RX Balanced BPF
RX2_2G_P
dB
MHz
dB
50
1910
35
4800
30
2.5X2.0X0.9
DEA252450BT-7014D1
1.9
100
1910
35
4800
30
2.5X2.0X0.9
DEA252450BT-7012D1
2500
2.4
50
1920
20
4800
23
2.5X2.0X0.9
DEA252450BT-7001B1
2500
3.0
100
2170
20
4800
30
2.5X2.0X0.9
DEA252450BT-7022B1
2402
2480
3.5
30+j30
2170
23
4800
25
2.5X2.0X0.95
DEA252441BT-7053D2
RX1_2G_P
2400
2500
3.6
34+j72
2170
48
2170
22
2.5X2.0X0.9
DEA252450BT-7035B2
2400
2500
2.7
50
2170
40
2170
33
2.1X1.50X0.9
DEA212450BT-7031A1
2400
2500
3.6
55+j50
2170
2.1X1.50X0.9
DEA212450BT-7043C1
2402
2480
CSR BC4
CSR BC4
2.1X1.25X0.6
DEA202450BT-7041E1
2400
2500
3.4
55+j50
2168
20
2.1X1.25X0.9
DEA202450BT-7089C2
2400
2500
3.5
100
2170
25
2.1X1.25X0.7
DEA202450BT-7054B1
2400
2500
3.5
34+j72
2170
17
2.1X1.25X0.95
DEA202450BT-7077A1
RX1_2G_N
ESD Protection
ANT1
Part No.
MHz
2400
RX Balanced BPF
SPDT
Size
mm (typ.)
RX2_2G_N
ANT2
VCNT1
Attenuation (MIN.)
Power Amplifier with Power Detection
TX Balun
Match to CSR BC4
Bias
TX_2G_P
TX LPF
VCNT2
4800
26
TX_2G_N
VDET
D
i
s
c
o
VCC_PA
VREF
4800
25
VATT
v
e
r
www.component.tdk.com
T
D
K
D
i
s
c
o
v
e
r
www.component.tdk.com
9
T
D
K
TDK RF Components for UWB Applications
RF Components for WLAN Applications
TDK Band Pass Filters for UWB Applications
TDK Band Pass Filters for UWB are available in a performance and a reduced footprint version.
The performance version is for applications requiring maximum attenuation at 2.4GHz and 5GHz
applications. Reduced footprint series is for applications requiring minimum attenuation.
DEA-3002B1
Performance
Series
Reduced
Footprint Series
[MECHANICAL DIMENSIONS]
Balun Transformers for 2.4GHz
Start
Frequency
MHz
2400 (2300)
Stop
Frequency
MHz
2500
2400 (2300)
2500
2400 (2300)
2500
2400 (2300)
Ins. Loss
dB (MAX)
Bal. Imed.
ohm
Amp. Bal dB
(MAX)
Phase Bal Deg
Size
mm (typ.)
Part No.
1.2
50
2.0
180+/- 10
2.0X1.2X0.95
HHM157(A2)
1.0
75
1.5
180+/- 10
2.0X1.2X0.95
HHM1541E1(E2)
1.0
100
2.0
180+/- 10
2.0X1.2X0.95
HHM1520(A2)
2500
1.0(1.1)
200
2.0
180+/- 10
2.0X1.2X0.95
HHM1521(A2)
2400
2500
1.2
50
2.0
180+/- 10
1.6X0.8X0.6
HHM1711D1
2400
2500
1.2
100
2.0
180+/- 10
1.6X0.8X0.6
HHM1711D1
2400
2500
1.0
100
1.5
180+/- 10
1.6X0.8X0.6
HHM1711N1
2400
2500
1.2
150
2.0
180+/- 10
1.6X0.8X0.6
HHM1712D1
2400
2500
1.2
200
1.7
180+/- 10
1.6X0.8X0.6
HHM1713E2
2400
2500
1.0
50
2.0
180+/- 10
1.0X0.5X0.45
HHM1902A1
2400
2500
1.0
100
2.0
180+/- 10
1.0X0.5X0.45
HHM1903A1
Part No.
Balun Transformers for 5GHz (Wide Band)
Electrical Characteristics at (T=30°C to 85°C, ZL=50Ω)
Parameter
Freq. (MHz)
Insertion Loss (T=25°C)
Insertion Loss (T=30°C to 85°C)
Input Return Loss
Attenuation
Attenuation
Attenuation
Attenuation
Attenuation
3168-4752
3168-4752
3168-4752
DC-2200
2200-2500
5151-5300
5300-7000
7000-14000
Specification
Min.
Max.
TYP
1.9
2.2
10
30
26
23
26
15
Electrical Characteristics Ta=25°C
Unit
dB
dB
dB
dB
dB
dB
dB
dB
No.
Parameter
Freq. (MHz)
Specification
Unit
1
2
Insertion Loss
3.168-4.752
2.0 max
dB
Return Loss
3.168-4.752
10 min
dB
3
Attenuation
DC-2.4
25 min
dB
4
Attenuation
2.5
25 min
dB
5
6
Attenuation
Attenuation
5.15-7.0
7.0-14.5
20 min
15 min
dB
dB
Frequency Characteristic
Frequency Characteristic
Start
Frequency
MHz
5150
Stop
Frequency
MHz
5875
4900
5950
4900
Ins. Loss
dB (MAX)
Bal. Imed.
ohm
Amp. Bal dB
(MAX)
Phase Bal Deg
Size
mm (typ.)
1.0
100
2.0
180+/- 10
2.0X1.2X0.95
HHM1562B
1.0
100
2.0
180+/- 10
2.0X1.2X0.95
HHM1570B1
5950
1.2
50
1.0
180+/- 10
1.6X0.8X0.6
HHM1733B1
4900
5950
1.0
100
2.0
180+/- 10
1.6X0.8X0.6
HHM1732B1
4900
5950
1.2
200
1.5
180+/- 10
1.6X0.8X0.6
HHM1752A2
Balun Transformers for Local (802.11a)
Start
Frequency
MHz
3400
Stop
Frequency
MHz
4010
3400
3400
Ins. Loss
dB (MAX)
Bal. Imed.
ohm
Amp. Bal dB
(MAX)
Phase Bal Deg
Size
mm (typ.)
Part No.
1.2
50
1.5
180+/- 10
2.0X1.2X0.95
HHM1545
4010
0.8
100
1.5
180+/- 10
2.0X1.2X0.95
HHM1594A1
3925
1.2
200
1.0
180+/- 10
1.6X0.8X0.6
HHM1548E1
UWB-Typical Data (De-embedded)
0
-10
Gain (dB)
-20
-30
-40
-50
-60
500
1500
2500
3500
4500
5500
6500
7500
8500
9500
Frquency (MHz)
Please contact TDK for full spec sheets and application notes.
D
i
s
c
o
v
e
r
www.component.tdk.com
T
D
K
D
i
s
c
o
v
e
r
www.component.tdk.com
7
T
D
K
RF Components for WLAN Applications
Multilayer Band Pass Filter for 5GHz (Wide Band)
Attenuation (MIN.)
Ins. Loss
dB (MAX)
MHz
dB
2.2
3450
5900
1.5
4900
5950
4900
4900
4940
Mechanical Dimensions
Size
mm (typ.)
Part No.
35
1.6X0.8X0.6
DEA165487BT-1202
3450
35
2.0X1.2X0.9
DEA205437BT-1200
1.5
3450
25
9800
17
2.0X1.2X0.9
DEA205425BT-1209B2
5950
2.0
3300
40
4000
25
7300
14
2.0X1.2X0.95
DEA205425BT-2028A4
5850
5850
1.2
3.5
824
2700
50
40
1910
4650
50
24
9800
7250
15
39
2.5X2.0X0.9
2.5X2.0X1.0
DEA255375BT-2076A1
DEA255395BT-2065D2
MHz
dB
MHz
dB
Balun Example : unbalanced 50Ω to balanced 100Ω
2.0 ± 0.15
HHM 1583B1
Pin Configuration:
1.
2.
3.
4.
5.
6.
Low Pass Filter
Start
Frequency
MHz
5125
4900
Stop
Frequency
MHz
5725
5950
Attenuation (MIN.)
Ins. Loss
dB (MAX)
MHz
dB
MHz
dB
MHz
dB
1.5
0.7
6800
9800
12
20
10250
11900
25
30
11450
25
Size
mm (typ.)
Part No.
1.6X0.8X0.8
1.6X0.8X0.8
DEA165725LT-1196A2
DEA165850LT-1197B2
Bal. Imped.
ohm
MHz
dB
MHz
2.8
100
4000
30
8000
Sample Specification : DEA255425BT-2028A4
dB
Part No.
20
2.0X1.5X1.3
DEA215425BT-7075C2
Parameter
Specification
Min. Max. TYP
—
—
—
—
1.6
2.0
Freq. (MHz)
1 Center Frequency
5425
2
Insertion Loss
4900-5950
Insertion Loss
3
4900-5950
-40 ~ +85 °C
4
Return Loss
4900-5950
5
Attenuation
1280-3300
6
Attenuation
3300-4000
7
Attenuation
4375-4465
8
Attenuation
7300-8930
9
Attenuation
9800-11900
2
3
0.95
±
0.1
(Bottom View)
Unit: mm
<
>
<
>
<
>
0.05 ± 0.2 0.2 ± 0.2
0.3 ± 0.2
Amplitude Balance
0
-5
Electrical Characteristics at 25deg C
No.
1
0.15
3
Size
mm (typ.)
Return Loss [dB]
Ins. Loss
dB (MAX)
4
±
Unbalanced Port
GND or DC feed
Balanced Port
Balanced Port
GND
N.C.
Return Loss
Attenuation (MIN.)
5
0.35 ± 0.2
3100.0 MHz
-17.06 dB
4000 MHz
-35.20 dB
4900 MHz
- 20.65 dB
-10
-15
-20
-25
-30
1.9
2.3
dB
9
40
25
7
14
25
11
50
33
12
18
38
—
—
—
—
—
—
dB
dB
dB
dB
dB
dB
0
-1
-3
3000
—
dB
—
1
-2
-35
-45
2500
Unit
3100.0 MHz
-0.10 dB
4000 MHz
-0.27 dB
4900 MHz
- 0.68 dB
2
-40
3500
4000
4500
Frequency [MHz]
5000
2500
5500
3000
3500
4000
4500
Frequency [MHz]
5000
5500
200
0.0
3100.0 MHz
-0.44 dB
4000 MHz
-0.35 dB
4900 MHz
- 0.53 dB
-0.5
Return Loss [dB]
Stop
Frequency
MHz
5950
6
1.25
Balanced Output
100 ohm
Unbalanced Input
50 ohm
Balanced Output Multilayer Band Pass Filter
Start
Frequency
MHz
4900
(Top View)
0.25 ±0.1/0.2
5150
TDK Baluns for UWB Applications
Amplitude [dB]
Stop
Frequency
MHz
5900
-1.0
-1.5
-2.0
-2.5
-3.0
2500
Phase Balance [dB]
Start
Frequency
MHz
5150
TDK RF Components for UWB Applications
3100.0 MHz
176.69 deg
4000 MHz
175.64 deg
4900 MHz
182.12 deg
190
180
170
160
3000
3500
4000
4500
Frequency [MHz]
5000
5500
2500
3000
3500
4000
4500
Frequency [MHz]
5000
5500
Electrical Characteristics at 25 degC
D
i
s
c
o
v
e
r
www.component.tdk.com
6
T
D
K
No.
PARAMETER
FREQ (MHz)
1
Insertion Loss (Lo-Band Port)
2300-2500
2
Insertion Loss (Hi-Band Port)
3
Return Loss (ANT Port)
4
SPEC
UNIT
Min.
Max.
_
1.2
dB
3168-4572
_
1.7
dB
2300-2500
10.0
_
dB
Return Loss (ANT Port)
3168-4572
4.5
5
Attenuation (Hi-Band Port)
2300-2500
20.0
_
dB
6
Attenuation (Lo-Band Port)
3168-4572
20.0
_
dB
D
i
s
c
o
v
e
r
www.component.tdk.com
dB
T
D
K
TDK RF Components for UWB Applications
TDK Balanced Antenna for Use in UWB Applications
TDK has developed a multilayer chip antenna with a patented balanced radiator structure. The
antenna’s unique structure allows it to maintain similar performance regardless of ground plane
size. Unlike monopole antennas, which are dependent on ground plane size, this antenna has
been designed for ease of integration in various applications without the worry of complex
board re-designs. It is ideal for use in CardBus, CompactFlash or USB designs.
RF Components for WLAN Applications
Multilayer Band Pass Filter for 2.4GHz
Start
Frequency
MHz
2400
Stop
Frequency
MHz
2500
2300
2500
2400
There is a significant difference in ground plane
size but almost no difference in VSWR results.
The antenna bandwidth is not detuned by
changing the ground plane size.
Attenuation (MIN.)
Ins. Loss
dB (MAX)
MHz
dB
MHz
dB
MHz
dB
Size
mm (typ.)
Part No.
1.2
915
35
1910
35
4800
30
2.5X2.0X0.9
DEA252400BT-2027A1
1.4
915
35
1910
35
4800
30
2.5X2.0X0.9
DEA252450BT-2030A1
2500
1.5
915
35
2100
20
4800
23
2.5X2.0X0.9
DEA252450BT-2031A1
2400
2500
2.1
915
45
2170
20
4800
30
2.5X2.0X0.9
DEA252450BT-2024C1
2400
2300
2400
2400
2400
2400
2300
2400
2400
2400
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
3.2
3.0
3.0
1.5
1.5
2.9
2.0
2.0
2.5
3.0
800
960
960
1900
1300
960
915
915
915
1250
40
50
50
30
25
40
25
25
25
30
2170
1990
1990
23
48
40
4800
2170
2170
25
22
33
3600
2170
1910
1910
1910
1900
30
16
25
20
20
20
4800
4800
4800
4800
4800
4800
34
30
20
20
25
25
2.0X1.2X0.65
2.5X2.0X0.9
2.5X2.0X0.9
2.5X1.2X0.95
2.0X1.2X0.9
2.0X1.2X0.65
1.6X0.8X0.6
1.6X0.8X0.55
1.6X0.8X0.55
1.6X0.8X0.6
DEA252450BT-2068A1
DEA252450BT-2024C2
DEA252450BT-2024D4
DEA252450BT-1251A1
DEA252450BT-1213C1
DEA252450BT-2038A5
DEA162450BT-1241A1
DEA162450BT-1247B1
DEA162450BT-1247C1
DEA162450BT-1210A1
Low Pass Filter
Start
Frequency
MHz
2400
Stop
Frequency
MHz
2500
2300
2500
Attenuation (MIN.)
Ins. Loss
dB (MAX)
MHz
dB
MHz
dB
MHz
dB
Size
mm (typ.)
Part No.
0.42
4800
25
5000
25
7200
18
1.6X0.8X0.6
DEA162500LT-1212A1
0.48
4800
35
5000
35
7200
25
1.6X0.8X0.6
DEA162500LT-1217A1
Ins. Loss
dB (MAX)
MHz
dB
MHz
dB
MHz
dB
Size
mm (typ.)
Part No.
0.75
920
25
1790
17
1915
20
2.0X1.2X1.0
DEA202484HT-8002A1
1.4
920
25
1790
18
1915
18
1.6X0.8X0.6
DEA162400HT-8004B1
High Pass Filter
Electrical Specifications
Parameter
Operation Frequency
Polarization
Antenna Gain
Impedance
VSWR
Value
Unit
3.1—5.2
Linear (Mixed)
2.0 (typ.)
50
3 (Max)
GHz
None
dBi
ohm
None
Start
Frequency
MHz
2400
Stop
Frequency
MHz
2484
2400
2500
Attenuation (MIN.)
Sample Specification : DEA252450BT-2024C2
Mechanical Dimensions (unit: mm)
Radiation Patterns
Electrical Characteristics at 25deg C
Contact TDK for full spec sheets and application notes
D
i
s
c
o
v
e
r
www.component.tdk.com
T
D
K
No.
Parameter
Freq. (MHz)
1
2
3
4
5
6
7
Insertion Loss
Return Loss
Attenuation
Attenuation
Attenuation
Attenuation
Attenuation
2400-2480
2400-2480
880-960
1565-1585
1710-1880
1930-1990
2110-2170
D
i
s
Specification
Min. Max. TYP
—
3.0 2.29
10.0
—
13.7
50.0
—
53.8
50.0
—
54.7
48.0
—
58.3
48.0
—
65.5
22.0
—
33.6
c
o
Unit
dB
dB
dB
dB
dB
dB
dB
v
e
r
www.component.tdk.com
5
T
D
K
RF Components for WLAN Applications
TDK WLAN components provide leading edge miniaturization technology while
providing exceptional electrical characteristics. TDK RF Components are
recommended by leading WLAN chipset manufacturers.
The following pages list our standard BPF’s, LPF’s, HPF’s, diplexers and baluns
for 2.4GHz & 5GHz WLAN.
TDK Services for UWB Wireless Systems
TDK Compliance Test Services & Expertise For UWB Wireless Systems
TDK’s advanced wireless radio testing services have been used by leading UWB chipset companies for both,
FCC compliance and UWB transceiver development. TDK provides complete regulatory compliance testing,
report preparation and submission.
Let TDK work with you to develop test and measurement solution for your Certified Wireless USB products.
TDK Test Labs
located in
Austin & Tokyo
TDK supports the complete FCC submission process.
Please contact TDK for evaluation samples and detailed specifications.
Diplexer for 2.4GHz & 5GHz
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Start
Frequency
MHz
Stop
Frequency
MHz
Insertion Loss
dB (MAX)
Size
mm (typ.)
Part Number
2300
2500
0.65
4900
5950
1.4
2.0x1.25x0.95
DPX205950DT-9008A1
2300
2500
0.65
4900
5950
1.4
2.0x1.25x0.95
DPX205950DT-9018A1
2400
2500
0.5
4900
5850
0.75
2.0x1.25x0.95
DPX205850DT-4027B1
D
i
s
c
o
v
e
r
www.component.tdk.com
4
3D radiation pattern of typical dipole antenna.
FCC granted UWB transceiver
General Atomics: AEVK-1
Wisair: DV9100
T
D
K
UWB transceiver testing requires measurements spanning
wide frequency and dynamic ranges. TDK provides FCC
compliance testing using specialized instrumentation and
an optimized facility to provide test reports.
D
i
s
c
o
Antenna performance is an important part of the UWB solution.
TDK performs antenna analysis for high performance Certified
Wireless USB transceiver development.
v
e
r
www.component.tdk.com
T
D
K
RF Components for Bluetooth Applications
TDK RF Components for UWB Applications
TDK RF components can be used in different architectures (see Example 1 & 2).
Please refer to page 5 for 2.4GHz BPF information and page 7 for 2.4GHz balun
information.
Wireless Ecosystem
TDK RF Components are recommended by leading Bluetooth chipset manufacturers.
TDK has designed a series of Balanced Output BPF’s that are optimized to match the
impedance requirements of Bluetooth IC’s.
The Wireless Ecosystem brings together various technologies required to develop and manufacture advanced
wireless products, systems and equipment. TDK provides key building blocks necessary to bring Certified
Wireless USB, High Data Rate Bluetooth and other UWB products to market.
Balanced impedance can
be optimized to match IC
ANT
Balanced output BPF
TDK components & services for UWB Technology include:
Switch
BPF
♦
Transceiver
Balun
♦
♦
Base band
♦
♦
D
i
s
c
o
v
e
r
www.component.tdk.com
8
T
D
K
D
Antennas
Baluns
Band Pass Filters
Diplexers
EMI Filters
i
s
♦
♦
♦
♦
♦
c
o
Test Systems
Test Services
Anechoic Chambers
Inductors
Capacitors
v
e
r
www.component.tdk.com
T
D
K
TDK Services for UWB Wireless Systems
Table of Contents
TDK Test & Measurement Solutions for Your UWB Wireless System
UWB-EMC Test System
UWB-EMC test system (for test and measurement of radiated emission from UWB radio) Ultra wide frequency measurement required FCC compliance test.
Ultra wide dynamic ranges for UWB test which radiate very
low power emission.
TDK’s original anechoic chamber, antenna, and software
based test system.
Possible to upgrade your EMC test systems to state-of-theart UWB-EMC test system.
3m chamber (FCC comply, 9x6x5.7m)
Compact chamber (FCC comply, 7x4x3m)
TDK’s original hybrid anechoic chamber
Test system for measurement up to 40GHz
Hardware, software, & training are included
TDK Offers Complete Turnkey Systems of Anechoic Chambers
TDK offers a "single vendor" solution for test facilities by offering both systems and test chambers. Offering a TDK line of turnkey 3 meter, 5 meter, 10 meter, and compact anechoic chamber solutions based on top-performing TDK absorber technologies.
Each facility is built with high-performance radio wave absorbing materials selected specifically to match your test requirements
and manage the implementation of both systems and chambers to deliver a turnkey test facility that is tightly integrated.
Anechoic chambers for EMC Testing:
3m type (FCC comply, 9x6x5.7m) or compact type (FCC comply,7x4x3m)
TDK’s high performance electromagnetic absorber material
(IB-015 and IP-045 absorber)
Automatically controlled turntable and antenna mast via optical fiber.
Normalized Site Attenuation (NSA) measurement for compliance.
D
i
s
c
o
TDK offers a series of RF components for many wireless applications.
From filters and antennas to test services and anechoic chambers solutions,
TDK has a solution for you.
● WLAN SOLUTIONS
PAGE
04
● BLUETOOTH SOLUTIONS
PAGE
08
● WiMAX Solutions
Page
10
● UWB SOLUTIONS
PAGE
13
Anechoic Chamber for Antenna Testing
Anechoic chamber (compact type, 7x4x4m)
TDK’s high performance electromagnetic absorber material (IS-060 absorber)
TDK’ original oblique incident absorber, IS-SM050, for exceptional absorption
performance
Quiet zone (QZ) measurement
v
e
r
www.component.tdk.com
T
D
K
D
i
s
c
o
v
e
r
www.component.tdk.com
T
D
K
Discover TDK Solutions
Discover TDK Solutions
RF Components for Wireless Applications
RF Components for Wireless Applications
For Samples, Datasheets and Additional Product Information
on these and other TDK Wireless Solutions . . .
TDK RF Components & Services :
TDK Corporation of America
1221 Business Center Drive, Mount Prospect, IL 60056
Phone: +1 (847) 803-6100
Fax: +1 (847) 803-1125
Email: wirelessinfo@tdktca.com
Visit our website: www.component.tdk.com
D
i
s
c
o
v
e
r
www.component.tdk.com
●
●
●
●
●
●
T
D
K
D
i
Band Pass Filters
Diplexers
Low Pass Filters
Couplers
High Frequency Inductors
Circulators/ Isolators
s
c
o
●
●
●
●
●
●
Baluns
Antennas
High Pass Filters
Test Services
Test Equipment
Anechoic Chambers
v
e
r
www.component.tdk.com
T
D
K
