FCR10.0M5

Ceramic Resonators Lead type 3.45 to 40MHz FCR(Built-in load capacity/External load capacity) series Issue date: August 2007 • All specifications are subject to change without notice. • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. (1/2) Ceramic Resonators(Lead) FCR Series FEATURES • The FCR series are samll leaded ceramic resonators that used thickness shear mode or 3rd over tone thickness mode element of piezo ceramics with both 3.45 to 10.0MHz and 16.0 to 50.0MHz. • The products with built-in capacitances have a dielectric element formed two capacities. This eliminates the external loading capacitors, thus simplifying circuit requirements. • Optimization of the temperature characteristics of both the piezoelectric materials and dielectric materials has resulted in stable oscillating frequency. • Ammo packing is available for various automatic insert machine (1500pieces/box). Short lead type and L-bend lead type are also available, please contact TDK. • Setting or matching of oscillating circuit condition which correspond to new models IC, application IC or custom IC are available, please contact TDK. • The products don’t contain Lead at solder of internal joint and solder plating oflead wire. You can use both Pb free solder (Sn3Ag-0.5Cu) and Sn-Pb eutectic solder on your production. TEMPERATURE RANGES Operating/Storage –40 to +85°C Conformity to RoHS Directive PRODUCT IDENTIFICATIONS FCR 4.0 MC5 (1) (2) (3) (1) Series name FCR Ceramic resonator (lead) (4) (5) (6) (7) (8) (2) Oscillating frequency (3) Production type and dimensions Symbol M5 MC5 M6 Oscillating frequency range 3.45 to 10.0 MHz 3.45 to 10.0 MHz 16.0 to 50.0 MHz Loading capacitors External Internal External (4) Initial oscillating frequency tolerance Non A Others ±0.5% ±0.3% Custom made ±0.5% ±0.3% ±0.5% — (5) Oscillating frequency correlation Non F F1 F2 Others Non correlation for TDK Standard Custom made Custom made Custom made Custom made OSCILLATING FREQUENCY DRIFT OVER TEMPERATURE ±0.3%/–40 to +85°C(Standard) OSCILLATING FREQUENCY AGING ±0.3%/10years(Standard) SHAPES AND DIMENSIONS FCR∗∗ .∗ MC5 BUILT-IN LOADING TYPE 9.5max. 6.5max. 5max. 6.5max. (6) Loading capacitance (7) Products thickness Non N Others Standard Custom made Custom made FCR∗∗ .∗ M5 EXTERNAL LOADING TYPE 9.5max. 5max. (8) Packaging style and lead length Symbol Non Packaging style Bulk (500pieces) Bulk (500pieces) Bulk (500pieces) Taping (Ammo pack 16mm height,1500pieces) Taping (Ammo pack 18mm height,1500pieces) Custom made Lead length Standard (5mm) 3.1mm 3.0mm — — ∗.∗MC TDK ∗.∗M TDK M M3 T T3 5 ± 0.5 5 ± 0.5 2.5 ± 0.3 2.5 ± 0.3 ø0.55 ± 0.1 5 ± 0.5 ø0.55 ± 0.1 Others FCR∗∗ .∗ M6 EXTERNAL LOADING TYPE 6.0max. 7.0max. 4max. 184 Dimensions in mm • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • All specifications are subject to change without notice. 002-01 / 20070815 / ef32_fcr.fm (2/2) ELECTRICAL CHARACTERISTICS Part No. Oscillating frequency Fosc (MHz) FCR∗∗ .∗ MC5 type(Built-in loading type) FCR3.45MC5 3.45 FCR3.52MC5 3.52 FCR3.58MC5 3.58 FCR3.64MC5 3.64 FCR3.84MC5 3.84 FCR4.0MC5 4.00 FCR4.19MC5 4.19 FCR5.0MC5 5.00 FCR6.0MC5 6.00 FCR8.0MC5 8.00 FCR8.38MC5 8.38 FCR10.0MC5 10.00 FCR∗∗ .∗ M5 type(External loading type) FCR3.45M5 3.45 FCR3.52M5 3.52 FCR3.58M5 3.58 FCR3.64M5 3.64 FCR3.84M5 3.84 FCR4.0M5 4.00 FCR4.19M5 4.19 FCR5.0M5 5.00 FCR6.0M5 6.00 FCR8.0M5 8.00 FCR8.38M5 8.38 FCR10.0M5 10.00 FCR∗∗ .∗ M6 type(External loading type) FCR16.0M6 16.00 FCR18.0M6 18.00 FCR18.43M6 18.43 FCR24.0M6 24.00 FCR25.0M6 25.00 FCR33.86M6 33.86 FCR40.0M6 40.00 Resonant impedance Ro(Ω) 20 20 20 20 20 20 20 20 20 30 30 30 20 20 20 20 20 20 20 20 20 30 30 30 40 40 40 40 40 40 40 Initial Fosc tolerance∗ (%) ±0.5 ±0.5 ±0.5/0.3 ±0.5 ±0.5 ±0.5/0.3 ±0.5/0.3 ±0.5/0.3 ±0.5/0.3 ±0.5/0.3 ±0.5/0.3 ±0.5/0.3 ±0.5 ±0.5 ±0.5/0.3 ±0.5 ±0.5 ±0.5/0.3 ±0.5/0.3 ±0.5/0.3 ±0.5/0.3 ±0.5/0.3 ±0.5/0.3 ±0.5/0.3 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 Capacitance CL1/CL2 (pF) 30/30 30/30 30/30 30/30 30/30 30/30 30/30 30/30 30/30 20/20 20/20 20/20 ∗ ±0.5% is standard. • These values are typical. Application frequency are also available. Please contact TDK. RELIABILITY AND TEST CONDITIONS The following test items are satisfied. (1) Oscillating frequency change: within ±0.25% (2) Resonant resistance change: within ±10Ω (3) Appearance, serious abnormalities not to exist. Test items Low temperature storage characteristics High temperature storage characteristics Humidity resistance Thermal shock Soldering heat resistance Drop Vibration Test conditions Temperature: –40±3°C Time: 1000h Temperature: +85±2°C Time: 1000h Humidity: 90 to 95(%)RH Temperature: 60±2°C Time: 100h –40°C (30min), 85°C (30min) x 100 cycles Solder temperature: peak 260°C, 10s flow Drop 3 times onto the concrete from a height of 1m Frequency: 10 55 10Hz/min Amplitude: 1.5mm X, Y and Z directions for 2h each SOLDERABILITY The lead wires are adopted Pb free plating wire to apply Pb free soldering. You can also use current Sn-Pb eutectic solder. Test conditions With Rosin-ethanol 25% by weight,dip in Sn-Pb eutectic solder bath at 230±5°C for 3±0.5sec. or Pb free solder(Sn-3Ag-0.5Cu) bath at 245±2°C for 3±0.2sec. Test result 95% minimum of surface should be covered by new solder. RECOMMENDED SOLDERING CONDITIONS This is the fit product for flow soldering. FLOW SOLDERING CONDITION Heat-resistant temperature Heat-resistant time Number of times 260±5°C 10±1sec. 1time ⇔ ⇔ • All specifications are subject to change without notice. 002-01 / 20070815 / ef32_fcr.fm