TDK Corporation
Corporate Headquarters
13-1,Nihonbashi 1-chome,Chuo-ku
Tokyo 103-8272 Japan
Phone : Tokyo(03)5201-7229
Branch Office
Sales div. Phone (
)
PRODUCT SPECIFICATION
SPEC.No.
DATE
C479NAA00005_1
2009/3/24
Digi-Key Corporation
CUSTOMER'S PRODUCT NAME :
TDK PRODUCT NAME :
FL3215T-000X
THIS SPECIFICATION IS :
FULLY RECEIVED
DENIED
RECEIVED UNDER THE FOLLOWING CONDITION
SIGNATURE :
NAME(PRINT) :
TITLE :
DATE:
Circuit Devices Business Group
PREPARED BY
APPROVED BY AUTHORIZED BY
S.Kikuchi
Mar.24.'09
M.Takeda
Mar.24.'09
H.Itoh
Mar.24.'09
Sales Division
REVIEWED BY
AUTHORIZED BY
CAUTION FOR SAFETY USING
When use the products, be careful to mentioned below for safety using.
If make mistake in using ,be afraid of OPEN,SHORT,SMOKE.
CAUTION WHEN HANDLING
Before use the products, must be read this specification.
The products listed on this specification sheet are intended for use in general electronic
equipment (AV equipment, telecommunications equipment, home appliances,amusement
equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications
listed below, whose performance and/or quality require a more stringent level of safety or
reliability, or whose failure, malfunction or trouble could cause serious damage to society,
person or property.we are not responsible for any damage or liability caused by use of the
products in any of the applications below or for any other use exceeding the range or
conditions set forth in this specification sheet.
①
②
③
④
⑤
⑥
⑦
Aerospace/Aviation equipment
Transportation equipment(cars, electric trains, ships,etc)
Medical equipment
Power-generation control equipment
Atomic energy-related equipment
Seabed equipment
Transportation control equipment
⑧
⑨
⑩
⑪
⑫
⑬
Public information-processing equipment
Military equipment
Electric heating apparatus, burning equipment
Disaster prevention/crime prevention equipment
Safety equipment
Other applications that are not considered general-purpose
applications
When using this product in general-purpose applications, you are kindly requested to take
into consideration securing protection circuit/equipment or providing backup circuits, etc.,
to ensure higher safety.
○ The product should be used within 6 months of receipt, Storage area must remain
cool and dry, and free of corrosive fumes to ensure solder ability.
○ Add excessive bending stress to P.C.Board, the products may open defect. So be
careful to set up of mounter.
○ Comply with the specifications for rework on soldering after being mounted; excessive
heating may result in short circuits, degradation, compromised reliability,etc.
○ As the product temperature rises due to self-heating, the margin(of temperature rise)
must be taken into account.
○ As the magnetic field rises around the product due to current, take precautions in
wrong action.
○ Take precautions in placement orientation of unshielded type inductors, for malfunction
may occur due to magnetic interference, coupling.
○ Consult TDK for operating conditions of interlayer withstand voltage.
○ Do not use the product in a corrosive environment (gas, salt, acid, alkaline, etc).
○ The product is not designed for radiation proof applications.
Handling Precautions
TDK CORPORATION
1. Scope
These specifications apply to the SMD inductors
FL3215
which
Digi-Key Corporation
has requested delivery.
2. Product Name
The products, which fall under these specifications, are given the name of
Customer
TDK
FL3215T-000X
3. Product Name description
FL
1
32
2
15
3
1. Product type
4. Package type T(Taping)
T
4
-
OOO
5
X
6
2. Product length
3. Product height
5. Inductance value (name) 6. Inductance tolerance
K(+/-10%) M(+/-20%)
4. Table of contents
Contents
1. Exterior, Construction & dimensions.
And the recommended land pattern,Internal structure
2. Electrical characteristics and measuring jig
3. Ratings
4. Others
5. Tests
6. Packaging specification
7. The recommended Soldering condition
Page
2
3,4
5
5
6
7,8
9
5.Country of origin
Country of origin
Factory
Japan
TDK Shonai corporation
Tsuruoka, Yamagata, Japan
Revision
revision
Date
Person
division
TDK Corporation
Magnetics Business Group
Issue date
2009/3/24
TDK Corporation
Revision contents
DRAWING No.
C479NAA00005_1
PAGE
1 /9
1. Exterior, Construction and dimensions
1.1. Outline dimensions
1.2. The recommended land pattern
1.3. Internal structure
② Winding material
2.0
① Core
④ Outer material
③ Terminal
1.2
SCALE
UNIT
-
mm
SIZE
-
⑤ Glue
1.2
2.0
1
2
3
4
5
THIRD ANGLE
PROJECTION
TDK CORPORATION
No
Core
Winding material
Terminal
Outer material
Glue
PARTS
1
1
2
Q.ty
Ferrite
Cu
Cu alloy
Sn plated
Thermoplastic resin
epoxy
MATERIALS
NAME OF DRAWING
DRAWING No.
PRODUCT SPECIFICATION
C479NAA00005_1
REMARK
PAGE
2 /9
TSB-08-01-05(00)
2. Electrical Characteristics and the measuring jig
2.1.
Electrical Characteristics
TDK item name
Customer's P#
FL3215TR33M
1R0M
1R5M
2R2M
3R3M
4R7M
6R8M
100K
150K
220K
330K
470K
680K
101K
L
[uH]
L tolerance
[%]
Test freq.
[MHz]
0.33
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
SRF
[MHz]
typ.
280
100
90
70
60
50
40
30
25
19
17
14
11
10
Rdc
[ohm]
+/-20%
0.030
0.045
0.07
0.08
0.12
0.15
0.20
0.30
0.50
0.70
1.10
1.40
2.30
3.50
Idc1
[mA]
max.
1500
1200
1100
1000
800
760
640
520
400
340
270
210
180
140
Idc2
[mA]
max.
2300
2050
1600
1400
1100
1000
700
650
500
440
340
300
240
200
*Idc1 : Value obtained when DC current flows and the initial value of inductance has fallen by 10%
*Idc2 : Self temperature rise 40degC. Max.
TDK CORPORATION
NAME OF DRAWING
DRAWING No.
PRODUCT SPECIFICATION
C479NAA00005_1
PAGE
3 /9
TSB-08-01-05(00)
2.2 Electrical characteristics measurement equipment’s
Inductance
Rdc
SRF
:
:
:
Agilent 4294A PRECISION IMPEDANCE ANALYZER
ADEX AX-114N DIGITAL OHM METER
Agilent E5071B Network Analyzer
2.3. Measuring jig
2.3.1.
TDK TF-1
unit:mm
40.0
5.0 6.5 11.0
M3
Dimension
3.0 mm
17.5
Gap
GAP
BASE : PLASTIC
19
12
6.3 5.7 4 3
22.2
6.3
12.7
C1 .5
6.2 6.5 6.5
25.4
6.5 6.5
50.8
13
PBs 0.5t
(Ag or Au PLATED)
17.8
2.4.Examination conditions
Standard conditions is the temperature of 5 to 35 deg C, and 35 to 85% of humidity.
When a doubt arises, it considers as the temperature of 20 +/- 2 deg C,
and 65 +/- 5% of humidity.
TDK CORPORATION
NAME OF DRAWING
DRAWING No.
PRODUCT SPECIFICATION
C479NAA00005_1
PAGE
4 /9
TSB-08-01-05(00)
3. Ratings
Self Temperature arising
: less than 40 deg C
Storage temperature range
: -40 deg C to +125 deg C
Operating temperature range
: -40 deg C to +125 deg C (include self temperature rise)
Rating current : When the rating current flows, inductance should not drop more than 10 %.
4. Others
*
Should any doubts arise about this specification and others, it should be cleared
by a conference between the customer and TDK.
*
Product storage limit
The storage limit of the products is 6 months with a temperature
(20+/-10 deg.C) and a humidity (60+/-20%RH) whichever opened or not opened.
The start of that should be the delivered date.
About the product which has been left more than 6 months,
please check the solderability and the peeling strength of the tape.
Then please judge whether it is OK or not.
*
Please do not use the dropped product.
TDK CORPORATION
NAME OF DRAWING
DRAWING No.
PRODUCT SPECIFICATION
C479NAA00005_1
PAGE
5 /9
TSB-08-01-05(00)
figure 2
20mm
Criteria
There should be
no abnormality.
10mm
5. Tests
5.1. Reliability tests
Test name
Test method
1 Flexibility
The sample shall be soldered onto the PCB as showen in figure 1
and a load applied until the flexure in the arrow direction is made
almost 10mm. Then it should be returned to its original position.
figure 1
10mm
R340
90mm
2 Drop
The sample shall be dropped once naturally onto a concrete floor
from a height of 1.8 meter.
3 Vibration
The sample shall be soldered onto the PCB, then the vibration having
the frequency of 10 to 500Hz/min. or the amplitude of 1.5mm
should be applied.
FIux (rosin [JIS-K-5902] ,isopropyl alcohol [JIS-K-1522] and
a solution [rosin 20+/-5wt%] ) shall be coated over the whole of
the sample beforehand, then it shall be preheated for about 2 minutes
in 150 +0/-20 deg C. After that it shall be immersed for 3+1/-0
seconds fully in Pb-free solder [Sn-Ag3-Cu0.5] with 245+/-5 deg C.
FIux (rosin [JIS-K-5902] ,isopropyl alcohol [JIS-K-1522] and
a solution [rosin 20+/-5wt%] ) shall be coated over the whole of
the sample beforehand, then it shall be preheated for about 2 minutes
in 150 +0/-20 deg C. After that it shall be immersed for 10+1/-0
seconds fully in Pb-free solder [Sn-Ag3-Cu0.5] with 260+/-5 deg C.
The test shall be performed after the sample has stabilized
in -40 to +125 deg C, and the value calculated based on 20 deg C.
4 solderability
5 Resistance
to soldering
heat
6 Temperature
characteristics
1
2
3
4
delta L/L0