HHM17139B2

Oct. 2016 Ver.3.0 TDK Corporation Multilayer Balun For 2.4GHz W-LAN & Bluetooth HHM Series P/N: 1.6x0.8mm [EIA 0603] TYPE HHM17139B2 All specifications are subject to change without notice. TDK Technology - Proprietary and Confidential Information of TDK Group Companies Oct. 2016 Ver.3.0 TDK Corporation HHM17139B2 ■ SHAPES AND DIMENSIONS Dimensions (mm) L W T a b c d e 1.60 0.80 0.50 0.10 0.30 0.25 0.55 0.15 +/-0.10 +/-0.10 Max +/-0.10 +/-0.10 +/-0.10 +/-0.10 +/-0.10 Terminal functions Unbalanced Port (1) DC feed + RF GND or GND (2) Balanced Port (3) (4) (5) (6) ■ TEMPERATURE RANGE Operating temperature Storage temperature –40 to +85 °C –40 to +85 °C Balanced Port GND N.C. ■ TERMINATION FINISH Material Sn plate All specifications are subject to change without notice. TDK Technology - Proprietary and Confidential Information of TDK Group Companies Oct. 2016 Ver.3.0 TDK Corporation HHM17139B2 ■ ELECTRICAL CHARACTERISTICS Parameter Unbalanced Port Characteristic Impedance Balanced Port Characteristic Impedance Return Loss at Unbalanced Port (dB) Phase Balance (deg.) Amplitude Balance (dB) Insertion Loss (dB) Power Handling (W) Ta = +25+/-5°C Frequency (MHz) ( Measurement ) TDK Spec Min. Typ. Max. 50 (Nominal) 50 (Nominal) 2400 to 2600 10.0 23.8 - 2400 to 2400 to 2400 to 2600 170 178.4 190 2600 -1.0 0.53 1.0 2600 0.42 0.7 1.5 All specifications are subject to change without notice. TDK Technology - Proprietary and Confidential Information of TDK Group Companies Oct. 2016 Ver.3.0 TDK Corporation HHM17139B2 ■ FREQUENCY CHARACTERISTICS HHM17139B2(UNBALANCE 50ohm/BALANCE 50ohm) Amplitude Balance 2400.0 -32.27 2500.0 -32.66 2600.0 -23.77 0 -5 Return Loss[dB] -10 -15 MHz dB MHz dB MHz dB -20 -25 -30 -35 2 Amplitude Balance[dB] Return Loss 1 2400.0 -0.32 2500.0 -0.42 2600.0 -0.53 MHz dB MHz dB MHz dB 2400.0 178.39 2500.0 178.83 2600.0 179.41 MHz deg MHz deg MHz deg 0 -1 -40 -45 2000 2200 2400 2600 2800 -2 2000 3000 2200 2600 2800 3000 Phase Balance 2400.0 -0.40 2500.0 -0.41 2600.0 -0.42 0.0 -0.5 -1.0 -1.5 -2.0 MHz dB MHz dB MHz dB 200 Phase Balance[deg] Insertion Loss Insertion Loss[dB] 2400 Frequency[MHz] Frequency[MHz] 190 180 170 -2.5 -3.0 2000 2200 2400 2600 Frequency[MHz] 2800 3000 160 2000 2200 2400 2600 2800 3000 Frequency[MHz] All specifications are subject to change without notice. TDK Technology - Proprietary and Confidential Information of TDK Group Companies Oct. 2016 Ver.3.0 TDK Corporation HHM17139B2 ■ RECOMMENDED LAND PATTERN ■ ENVIRONMENT INFORMATION RoHS Statement RoHS Compliance All specifications are subject to change without notice. TDK Technology - Proprietary and Confidential Information of TDK Group Companies Oct. 2016 Ver.3.0 TDK Corporation HHM17139B2 ■ RECOMMENDED REFLOW PROFILE Pb free solder Soaking Temp. Time t1 T1 T2 150°C 180°C 60 to 120sec Working Temp. Time T3 t2 230°C more than 30sec Soldering Temp. Time T4 t3 Peak Temp. T5 247 to 253°C within 10sec 260°C Max. All specifications are subject to change without notice. TDK Technology - Proprietary and Confidential Information of TDK Group Companies REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using these products. REMINDERS The products listed on this specification sheet are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. Please understand that we are not responsible for any damage or liability caused by use of the products in any of the applications below or for any other use exceeding the range or conditions set forth in this specification sheet. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Aerospace/Aviation equipment Transportation equipment (cars, electric trains, ships, etc.) Medical equipment Power-generation control equipment Atomic energy-related equipment Seabed equipment Transportation control equipment Public information-processing equipment Military equipment Electric heating apparatus, burning equipment Disaster prevention/crime prevention equipment Safety equipment Other applications that are not considered general-purpose applications When using this product in general-purpose applications, you are kindly requested to take into consideration securing protection circuit/equipment or providing backup circuits, etc., to ensure higher safety. All specifications are subject to change without notice. TDK Technology - Proprietary and Confidential Information of TDK Group Companies