HHM17166A1

May 2015 Ver.1.1 TDK Corporation Multilayer Balun For LTE HHM Series P/N: 1608 TYPE HHM17166A1 All specifications are subject to change without notice. TDK Technology - Proprietary and Confidential Information of TDK Group Companies May 2015 Ver.1.1 TDK Corporation 　 HHM17166A1 ■ SHAPES AND DIMENSIONS (6) (5) (4) (1) (2) (3) Dimensions (mm) L W T a b c 1.60 0.80 0.60 0.30 0.25 0.15 +/-0.10 +/-0.10 +/-0.10 +/-0.10 +/-0.10 +/-0.10 Terminal functions Unbalanced Port (1) DC feed + RF GND or GND (2) Balanced Port (3) Balanced Port (4) GND (5) (6) N.C. Note: These samples are marked with trial sample identification. In mass production, this sample marking will be changed to show in the TDK full specification. ■ TEMPERATURE RANGE Operating temperature Storage temperature –40 to +85 °C –40 to +85 °C All specifications are subject to change without notice. TDK Technology - Proprietary and Confidential Information of TDK Group Companies May 2015 Ver.1.1 TDK Corporation 　 HHM17166A1 ■ ELECTRICAL CHARACTERISTICS Parameter Unbalanced Port Characteristic Impedance Balanced Port Characteristic Impedance Return Loss at Unbalanced Port (dB) Phase Balance (deg.) Amplitude Balance (dB) Insertion Loss (dB) Power Handling (W) Ta = +25+/-5°C Frequency (MHz) ( Measurement ) TDK Spec Min. Typ. Max. 50 20.1-j11.4 1900 to 2300 8 10.3 - 1900 to 1900 to 1900 to 2300 170 178 190 2300 -1.00 0.22 1.00 2300 1.51 2.20 1 All specifications are subject to change without notice. TDK Technology - Proprietary and Confidential Information of TDK Group Companies 　 May 2015 Ver.1.1 TDK Corporation HHM17166A1 ■ FREQUENCY CHARACTERISTICS All specifications are subject to change without notice. TDK Technology - Proprietary and Confidential Information of TDK Group Companies 　 May 2015 Ver.1.1 TDK Corporation HHM17166A1 ■ RECOMMENDED LAND PATTERN unit :mm ■ ENVIROMENT INFORMATION RoHS Statement RoHS Compliance All specifications are subject to change without notice. TDK Technology - Proprietary and Confidential Information of TDK Group Companies May 2015 Ver.1.1 TDK Corporation 　 HHM17166A1 ■ RECOMMENDED REFLOW PROFILE Pb free solder Soaking Temp. Time t1 T1 T2 150°C 180°C 60 to 120sec Temp. T3 230°C Working Time t2 more than 30sec Soldering Temp. Time T4 t3 Peak Temp. T5 247 to 253°C within 10sec 260°C Max. All specifications are subject to change without notice. TDK Technology - Proprietary and Confidential Information of TDK Group Companies May 2015 Ver.1.1 TDK Corporation 　 HHM17166A1 ■ PACKAGING STYLE Reel Dimensions φ13+/-0.2 13+/-1.0 2.0+/- 60+1.0 Label 21+/-0.8 Unit: mm 9+1.0/-0.0 180+0/-1.5 Carrier Tape A 0.97+/0.05 G B C D E 1.8+/-0.05 8.0+/-0.2 3.5+/-0.05 1.75+/-0.1 H J 2.0+/-0.05 4.0+/-0.1 1.5+0.1/-0 F 4.0±0.1 K 0.75+/0.05 STANDARD PACKAGE QUANTITY ( pieces/reel ) 4,000 All specifications are subject to change without notice. TDK Technology - Proprietary and Confidential Information of TDK Group Companies REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using these products. REMINDERS The products listed on this specification sheet are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. Please understand that we are not responsible for any damage or liability caused by use of the products in any of the applications below or for any other use exceeding the range or conditions set forth in this specification sheet. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Aerospace/Aviation equipment Transportation equipment (cars, electric trains, ships, etc.) Medical equipment Power-generation control equipment Atomic energy-related equipment Seabed equipment Transportation control equipment Public information-processing equipment Military equipment Electric heating apparatus, burning equipment Disaster prevention/crime prevention equipment Safety equipment Other applications that are not considered general-purpose applications When using this product in general-purpose applications, you are kindly requested to take into consideration securing protection circuit/equipment or providing backup circuits, etc., to ensure higher safety. All specifications are subject to change without notice. TDK Technology - Proprietary and Confidential Information of TDK Group Companies