HHM22152A2

Oct.2017 Ver.4.1 TDK Corporation Multilayer Directional Coupler 　 HHM Series P/N: 1608mm TYPE [mm] HHM22152A2 TDK Technology - Proprietary and Confidential Information of TDK Group Companies Oct.2017 Ver.4.1 TDK Corporation 　 HHM22152A2 ■ SHAPES AND DIMENSIONS [Top View] [Bottom View] (6) (5) (4) (4) (5) (6) (1) (2) (3) (3) (2) (1) Dimensions (mm) L W T a b c d e 1.60 0.80 0.60 0.35 0.22 0.57 0.225 0.22 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 Terminal functions Input Port (1) GND (2) Output Port (3) 50ohm Termination (4) GND (5) Coupling Port (6) ■ TERMINATION FINISH Material Au plate • All specifications are subject to change without notice. TDK Technology - Proprietary and Confidential Information of TDK Group Companies Oct.2017 Ver.4.1 TDK Corporation 　 HHM22152A2 ■ ELECTRICAL CHARACTERISTICS Parameter Frequency (MHz) Coupling Factor (dB) ( Measurement ) TDK Spec. Min. Typ. Max. 450 to 700 26.0 28.5 31.0 700 to 2700 22.5 25.0 27.5 3400 to 3800 22.3 23.4 24.5 450 to 2700 - 0.18 0.25 3400 to 3800 - 0.32 0.40 450 to 2700 45 51.5 - 3400 to 3800 40 59.7 - 450 to 3800 10 15.0 - Insertion Loss (dB) Isolation (dB) Return Loss(dB) Characteristic Impedance (ohm) 50 (Nominal) Ta = +25+/-5°C Coupler Type Daisy Chain Available Bi-Directional Yes No TDK Technology - Proprietary and Confidential Information of TDK Group Companies Oct.2017 Ver.4.1 TDK Corporation 　 HHM22152A2 ■ MAXIMUM RATINGS Parameter TDK Spec Min. Max. –40 to +85 °C –40 to +85 °C 3 Human Body Model : HBM @Each Port (V) -1000 1000 Machine Model : MM @Each Port (V) -150 150 Charged Device Model : CDM @Each Port (V) -500 500 Operating temperature (°C) Storage temperature (°C) Power Handling (W) Conditions CW 100pF / 1500ohm 200pF / 0ohm Relative humidity : 51%RH max Ambient temperature : +25+/-5°C All specifications are subject to change without notice. TDK Technology - Proprietary and Confidential Information of TDK Group Companies Oct.2017 Ver.4.1 TDK Corporation 　 HHM22152A2 ■ FREQUENCY CHARACTERISTICS Insertion Loss[dB] Insertion Loss 0 -0.2 -0.4 -0.6 -0.8 -1 -1.2 -1.4 Frequency 0 1000 2000 3000 Frequency[MHz] 4000 450 MHz -0.02 dB 700 MHz -0.04 dB 1427 MHz -0.09 dB 2700 MHz -0.18 dB 3400 MHz -0.27 dB 3800 MHz -0.32 dB 5000 coupling Coupling[dB] 0.0 -10.0 Frequency -20.0 450 MHz -30.2 dB -30.0 700 MHz -26.8 dB 1427 MHz -23.3 dB 2700 MHz -26.4 dB 3400 MHz -23.7 dB 3800 MHz -23.4 dB -40.0 -50.0 0 1000 2000 3000 Frequency[MHz] 4000 5000 Isolation -20 Frequency -40 -60 -80 -100 0 1000 2000 3000 Frequency[MHz] 4000 5000 450 MHz -60.7 dB 700 MHz -57.8 dB 1427 MHz -51.9 dB 2700 MHz -51.5 dB 3400 MHz -59.7 dB 3800 MHz -66.8 dB Return Loss Return Loss[dB] Isolation[deg] 0 0 -5 -10 -15 -20 -25 -30 -35 -40 -45 -50 Frequency 0 1000 2000 3000 4000 5000 450 MHz -39.3 dB 700 MHz -40.6 dB 1427 MHz -36.6 dB 2700 MHz -20.1 dB 3400 MHz -16.3 dB 3800 MHz -15.0 dB Frequency[MHz] TDK Technology - Proprietary and Confidential Information of TDK Group Companies 　 Oct.2017 Ver.4.1 TDK Corporation HHM22152A2 ■ RECOMMENDED LAND PATTERN ■ Evaluation Board Through hole Land ■ ENVIRONMENT INFORMATION RoHS Statement RoHS Compliance All specifications are subject to change without notice.TDK Technology - Proprietary and Confidential Information of TDK Group Companies Oct.2017 Ver.4.1 TDK Corporation 　 HHM22152A2 ■ RECOMMENDED REFLOW PROFILE 3oC/sec or lower Preheating Temp. T1 T2 Time t1 150°C 200°C 60 to 120sec 6oC/sec or lower Soldering Critical zone (T3 to T4) Peak Temp. Time Temp. Time T3 t2 T4 t3 * 217°C 60 to 120sec 240 to 260°C 30 sec Max * t3 : Time within 5°C of actual peak temperature The maximum number of reflow is 3. Note: Lead free solder is recommended. Recommended solder is Sn-3.0Ag-0.5Cu. (M705 by Senju Metal Industry) All specifications are subject to change without notice. TDK Technology - Proprietary and Confidential Information of TDK Group Companies Oct.2017 Ver.4.1 TDK Corporation 　 HHM22152A2 13±0.2 13.0±1. 2.0±0.5 60+1.0 Label 21±0.8 180 +0/-1.5 9.0 +1.0/-0.0 Unit : mm 4000pcs./reel TDK Technology - Proprietary and Confidential Information of TDK Group Companies REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using these products. REMINDERS The products listed on this specification sheet are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. Please understand that we are not responsible for any damage or liability caused by use of the products in any of the applications below or for any other use exceeding the range or conditions set forth in this specification sheet. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Aerospace/Aviation equipment Transportation equipment (cars, electric trains, ships, etc.) Medical equipment Power-generation control equipment Atomic energy-related equipment Seabed equipment Transportation control equipment Public information-processing equipment Military equipment Electric heating apparatus, burning equipment Disaster prevention/crime prevention equipment Safety equipment Other applications that are not considered general-purpose applications When using this product in general-purpose applications, you are kindly requested to take into consideration securing protection circuit/equipment or providing backup circuits, etc., to ensure higher safety. TDK Technology - Proprietary and Confidential Information of TDK Group Companies