HPL758040FR22MRD3P

I N D U C T O R S Inductors for power circuits Wound ferrite HPL series (for automotive) RoHS REACH SVHC-Free Cl Br Pb Halogen Free Lead Free AEC-Q200 HPL758040F type FEATURES Achieved high-reliability inductors without joints Adoption of ferrites made of LowLoss material and low-RDC by frame forming Magnetic flux cancellation realizes low EMI Operating temperature range: –55 to +155°C (including self-temperature rise) Compliant with AEC-Q200 APPLICATION ADAS - Level5 for xPU Power line PART NUMBER CONSTRUCTION HPL 758040 F R22 M RD3P Series name LxWxH dimensions 7.5x8.0x4.0 mm Internal code Inductance (nH) Inductance tolerance Internal code CHARACTERISTICS SPECIFICATION TABLE Measuring DC resistance Rated current frequency Isat 2 Itemp Isat 1 (nH) Tolerance (kHz) (m )max. (m )typ. (A)25deg.C (A)125deg.C (A)25deg.C (A)125deg.C (A)typ. 220 ±20% 100 0.61 0.55 38.5 27.5 40.0 28.5 43.0 330 ±20% 100 0.61 0.55 23.5 16.5 25.0 17.5 43.0 Rated current: smaller value of either Isat or Itemp. Isat 1: When based on the inductance change rate (20% below the nominal value) Isat 2: When based on the inductance change rate (30% below the nominal value) Itemp: When based on the temperature increase (temperature increase of 40°C by self heating) L Part No. HPL758040FR22MRD3P HPL758040FR33MRD3P Measurement equipment Measurement item Product No. L 4294A DC resistance 3541 Rated current Isat ZM2376+DC30108+SEN58405 ＊ Equivalent measurement equipment may be used. Manufacturer Keysight Technologies HIOKI NF Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (1/4) 20190415 inductor_automotive_power_hpl758040f_en.fm I N D U C T O R S HPL758040F type L FREQUENCY CHARACTERISTICS 500 400 Inductance(nH) R33 300 R22 200 100 0 0.1 1 10 100 Frequency(MHz) Measurement equipment Product No. Manufacturer 4294A Keysight Technologies ＊ Equivalent measurement equipment may be used. L VS. DC BIAS CHARACTERISTICS 350 R33 300 Inductance(nH) 250 R22 200 150 100 50 0 0 10 20 30 DC current(A) 40 50 60 Measurement equipment Product No. Manufacturer ZM2376+DC30108+SEN58405 NF ＊ Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (2/4) 20190415 inductor_automotive_power_hpl758040f_en.fm I N D U C T O R S HPL758040F type SHAPE & DIMENSIONS PACKAGING STYLE (1.2) REEL DIMENSIONS 2.2±0.5 2.3±0.5 1 3 (5.25) 8.0±0.2 1 3 2 (1.2) 2 4.0max. ø100 7.5±0.2 (1.0) (0.6) (6.3) (0.6) Dimensions in mm ø13.0±0.5 16.5±0.5 ø26.4±0.8 23 or less ø330 Dimensions in mm 1.5 +0.1 –0 0.4 2.0±0.1 4.0±0.1 Sprocket hole 7.5±0.1 RECOMMENDED LAND PATTERN 1.75±0.1 TAPE DIMENSIONS 1.8 3 2.2 2.2 B 1 16.0±0.3 1.8 0.3 Cavity K 2 A 12.0±0.1 Dimensions in mm 1.15 5.8 1.15 Dimensions in mm Type HPL758040F A 8.5±0.1 B 8.0±0.1 K 4.3±0.1 PACKAGE QUANTITY RECOMMENDED REFLOW PROFILE Preheating Soldering Package quantity Natural cooling Peak 245°C Temperature 230°C 230°C 1000 pcs/reel TEMPERATURE RANGE, INDIVIDUAL WEIGHT Operating Storage Individual temperature range temperature range weight –55 to +155 °C –55 to +155 °C 1.0 g  Operating temperature range includes self-temperature rise.  The storage temperature range is for after the assembly. 180°C 5s max. 150°C 60 to 120s 10 to 30s Time Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (3/4) 20190415 inductor_automotive_power_hpl758040f_en.fm I N D U C T O R S REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is within 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. Do not use products that have received any excessive mechanical shock such as by being dropped. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Do not expose the products to magnets or magnetic fields. The performance of the product may deteriorate if coating materials are used, thus please assess the situation beforehand by taking this factor into consideration. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment   (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (4/4) 20190415 inductor_automotive_power_hpl758040f_en.fm