MAF2520ASS600CT000

E M C C o m p o n e n t s Noise suppression filter For LED lights, DC power supply for home appliances (Radiated noise suppression) MAF series RoHS REACH SVHC-Free Cl Br Pb Halogen Free Lead Free MAF2520A type FEATURES This product is designed to reduce low-frequency (20 to 100 MHz) radiation noise for LED lighting and home appliances. It is smaller than the winding type and has the same noise suppression effect. Contributes to meeting CISPR standards with LED lighting and home appliances. Operating temperature range: –40 to +125°C (including self-temperature rise) APPLICATION LED lighting equipment Home appliances (refrigerators, air conditioners, washing machines, vacuum cleaners) PART NUMBER CONSTRUCTION MAF 2520 A SS 600 C T 000 Series name L×W×T dimensions 2.5×2.0×0.85 mm Characteristics Internal code Impedance () at 1MHz Internal code Packaging style Internal code CHARACTERISTICS SPECIFICATION TABLE Impedance Rated current DC resistance Part No. [1MHz] Itemp ( )Typ. ( )Min. ( )max. ( )Typ. (mA)max. 60 45 0.364 0.280 700 MAF2520ASS600CT000 Please refer to the graph of rated current vs. temperature characteristics (derating) about the rating current at 85°C or more in temperature of the product. Measurement equipment Measurement item Product No. Impedance 4294A+16034G DC resistance Type-7561 ＊ Equivalent measurement equipment may be used. Manufacturer Keysight Technologies Yokogawa Rated current vs. temperature characteristics (derating) Rated current (mA) 800 600 400 200 0 –55 –35 –15 5 25 45 65 Temperature (°C) 85 105 125 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (1/4) 20190214 suppression-filter_commercial_maf2520a_en.fm E M C C o m p o n e n t s MAF2520A type Z, X, R VS. FREQUENCY CHARACTERISTICS 5000 Impedance (Ω) 4000 Z 3000 R 2000 X 1000 0 1 10 100 1000 Frequency (MHz) INSERTION LOSS VS. FREQUENCY CHARACTERISTICS 0 5 Insertion Loss(dB) 10 15 20 25 30 35 40 1 10 100 Frequency(MHz) 1000 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (2/4) 20190214 suppression-filter_commercial_maf2520a_en.fm E M C C o m p o n e n t s MAF2520A type PACKAGING STYLE SHAPE & DIMENSIONS 2.00±0.15 REEL DIMENSIONS 0.50±0.30 2.0±0.5 0.50±0.30 0.85±0.15 ø60min. 2.50±0.15 1.0 8.4 +2.0 –0.0 ø13±0.2 Dimensions in mm ø21±0.8 14.4max. ø180±2.0 Dimensions in mm RECOMMENDED LAND PATTERN TAPE DIMENSIONS 0.7 Sprocket hole 2.0±0.05 4.0±0.1 B 8.0±0.3 2.0 1.5 +0.1 –0 3.5±0.05 1.4 1.75±0.1 0.7 4.0±0.1 A K Cavity Dimensions in mm Dimensions in mm Type MAF2520A A 2.7±0.1 B 2.3±0.1 K 1.1±0.1 RECOMMENDED REFLOW PROFILE Preheating Soldering Natural cooling 160min. Taping 200min. Peak 250 to 260°C Temperature 230°C 300min. Drawing direction 230°C Dimensions in mm PACKAGE QUANTITY 180°C Package quantity 10s 150°C 60 to 120s 3,000 pcs/reel TEMPERATURE RANGE, INDIVIDUAL WEIGHT 30 to 60s   Operating Storage Individual temperature range temperature range weight –40 to +125 °C –40 to +85 °C 20 mg Operating temperature range includes self-temperature rise. The storage temperature range is for after the assembly. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (3/4) 20190214 suppression-filter_commercial_maf2520a_en.fm E M C C o m p o n e n t s REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is less than 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment   (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (4/4) 20190214 suppression-filter_commercial_maf2520a_en.fm