Discontinue Issue Date
Last Purchase Order Date
Last Shipment Date
Dec. 6, 2018
Jun. 30, 2020
Dec. 31, 2020
E M C
• Please refer to our Web site about replacement information.
C o m p o n e n t s
Common mode filters
High-speed differential signal line(USB2.0, LVDS, etc.)
MCZ-AH series
RoHS
REACH
SVHC-Free
Cl
Br
Pb
Halogen
Free
Lead
Free
pr
od
u
st cts
op w
pe il
d lb
pr e
od or
uc ha
tio ve
n
be
en
MCZ2010AH type
FEATURES
Compact multilayer common mode filter.
Has EMC suppression by achieving wide frequency range differential mode transmission while ensuring common mode impedance
with virtually no affect on the high-speed differential transmission line signal.
Operating temperature range: –40 to +85°C
APPLICATION
Electronic equipment high-speed interface (LVDS, USB2.0, MHL)
Mobile phones, PCs, DSCs, portable game machines, etc.
PDP/LCD/DLP/PJ TVs, DVD players, DVCs, mobile audio, etc.
Application guides: Smart phones/tablets
PART NUMBER CONSTRUCTION
MCZ
Series name
2010
AH
900
L4
T
000
L×W×T dimensions
2.0×1.0×0.5 mm
Product internal
code
Impedance
() at 100MHz
Number of lines
Packaging style
Internal code
CHARACTERISTICS SPECIFICATION TABLE
Common mode impedance
DC resistance
Rated current
Rated voltage
Insulation
resistance
[100MHz]
[1 line]
( )max.
1.50
2.00
3.50
(mA)max.
100
100
100
(V)max.
5
5
5
(M )min.
10
10
10
( )
90
120
200
Tolerance
±25%
±25%
±25%
Part No.
MCZ2010AH900L4T000
MCZ2010AH121L4T000
MCZ2010AH201L4T000
Measurement equipment
Manufacturer
Keysight Technologies
Yokogawa
Keysight Technologies
Th
e
Measurement item
Product No.
Common mode impedance
E4991A+16192A
DC resistance
Type-7561
Insulation resistance
4339B
* Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(1/4)
20181213
cmf_commercial_signal_mcz2010ah_en.fm
E M C
C o m p o n e n t s
MCZ2010AH type
IMPEDANCE VS. FREQUENCY CHARACTERISTICS
pr
od
u
st cts
op w
pe il
d lb
pr e
od or
uc ha
tio ve
n
be
en
10000
121 Differential mode
1000
201 Differential mode
Impedance (Ω)
201 Common mode
121 Common mode
900 Common mode
100
900 Differential mode
10
1
1
10
100
Frequency (MHz)
1000
10000
Measurement equipment
Th
e
Product No.
Manufacturer
E4991A+16192A
Keysight Technologies
* Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(2/4)
20181213
cmf_commercial_signal_mcz2010ah_en.fm
E M C
C o m p o n e n t s
MCZ2010AH type
SHAPE & DIMENSIONS
PACKAGING STYLE
REEL DIMENSIONS
7
6
5
3
4
E
2.0±0.5
2
0.5±0.1
1
ø60min.
1.0±0.15
0.2±0.15
8
pr
od
u
st cts
op w
pe il
d lb
pr e
od or
uc ha
tio ve
n
be
en
2.0±0.15
0.5±0.1
0.25±0.1
1.0
Dimensions in mm
8.4 +2.0
–0.0
ø13±0.2
ø21±0.8
RECOMMENDED LAND PATTERN
14.4max.
ø180±2.0
Dimensions in mm
4.0±0.1
3.5±0.05
2.0±0.05
B
0.25
0.5
1.5 +0.1
–0
8.0±0.3
Sprocket
hole
1.75±0.1
1.8
0.6
TAPE DIMENSIONS
Dimensions in mm
A
K
Cavity
4.0±0.1
CIRCUIT DIAGRAM
8
7
6
1
2
3
Dimensions in mm
Type
MCZ2010AH
5
A
1.15±0.05
160min.
• No polarity
Taping
B
2.15±0.05
K
0.86max.
200min.
4
Drawing direction
RECOMMENDED REFLOW PROFILE
Preheating
Soldering
300min.
Dimensions in mm
Natural
cooling
PACKAGE QUANTITY
Package quantity
Peak
5,000 pcs/reel
Th
e
Temperature
250 to 260°C
230°C
230°C
TEMPERATURE RANGE, INDIVIDUAL WEIGHT
Operating
Storage
temperature range
temperature range
–40 to +85 °C
–40 to +85 °C
The storage temperature range is for after the assembly.
180°C
Individual
weight
5.0 mg
10s max.
150°C
60 to 120s
30 to 60s
Time
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(3/4)
20181213
cmf_commercial_signal_mcz2010ah_en.fm
E M C
C o m p o n e n t s
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
pr
od
u
st cts
op w
pe il
d lb
pr e
od or
uc ha
tio ve
n
be
en
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using this products.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or
less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society,
person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
Th
e
(1) Aerospace/aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(4/4)
20181213
cmf_commercial_signal_mcz2010ah_en.fm