MDF1005GAD102ATD25

E M C C o m p o n e n t s Noise suppression filter For UHF band noise suppression MDF series (for automotive) RoHS REACH SVHC-Free Cl Br Pb Halogen Free Lead Free AEC-Q200 MDF1005 type FEATURES It is a small filter best suited for high frequency isolation. DC superposition characteristics of good impedance were realized. Contribute to high frequency radiation noise (0.7 to 2.4 GHz). With a rated current of 400mA at 125°C, 1000 or more (@1GHz) has been achieved with 1005 shape. APPLICATION ADAS circuit/BUS line Telematics unit (C-V2X, e-call etc.) PART NUMBER CONSTRUCTION MDF 1005 G AD 102 A T D25 Series name L×W×T dimensions 1.0×0.5x0.5 mm Characteristics Internal code Impedance () at 900MHz Type Packaging style Internal code CHARACTERISTICS SPECIFICATION TABLE Impedance DC resistance Rated current Part No. [100MHz] [900MHz] 85°C 105°C 125°C ( )Typ. ( )Typ. ( )Typ. ( )max. (mA) max. (mA) max. (mA) max. 190 1000 0.530 0.690 550 480 400 MDF1005GAD102ATD25  Please refer to the graph of rated current vs. temperature characteristics (derating) about the rating current at 85°C or more in temperature of the product. Measurement equipment Measurement item Product No. Impedance E4991A+16192A DC resistance Type-7556 ＊ Equivalent measurement equipment may be used. Manufacturer Keysight Technologies Yokogawa Rated current vs. temperature characteristics (derating) Rated current (A)max. 0.6 0.5 0.4 0.3 0.2 0.1 0.0 –55 –35 –15 5 25 45 65 Temperature (°C) 85 105 125 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (1/4) 20200726 suppression-filter_automotive_mdf1005_en.fm E M C C o m p o n e n t s MDF1005 type (Wide-band type) Z FREQUENCY CHARACTERISTICS 1200 MDF1005GAD102A 1000 Impedance (Ω) 800 600 400 200 0 1 10 100 Frequency (MHz) 1000 INSERTION LOSS VS. FREQUENCY CHARACTERISTICS 0 5 Insertion Loss (dB) MDF1005GAD102A 10 15 20 25 1 10 100 Frequency (MHz) 1000 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (2/4) 20200726 suppression-filter_automotive_mdf1005_en.fm E M C C o m p o n e n t s MDF1005 type PACKAGING STYLE SHAPE & DIMENSIONS 0.50±0.05 REEL DIMENSIONS 0.10min. 2.0±0.5 0.10min. 0.50±0.05 ø60min. 1.00±0.05 1.0 8.4 +2.0 –0.0 ø13±0.2 Dimensions in mm ø21±0.8 14.4max. ø180±2.0 Dimensions in mm 4.0±0.1 0.5 8.0±0.3 0.4 2.0±0.05 B 0.5 1.5 +0.1 –0 3.5±0.05 0.5 Sprocket hole 1.75±0.1 TAPE DIMENSIONS RECOMMENDED LAND PATTERN Dimensions in mm K A Cavity 2.0±0.05 Type MDF1005 Dimensions in mm A 0.65±0.1 B 1.15±0.1 K 0.8max. RECOMMENDED REFLOW PROFILE 160min. Preheating Soldering Taping 200min. Natural cooling Peak 250 to 260°C 300min. Drawing direction Dimensions in mm Temperature 230°C 230°C PACKAGE QUANTITY Package quantity 180°C 10,000 pcs/reel 10s 150°C TEMPERATURE RANGE, INDIVIDUAL WEIGHT 60 to 120s 30 to 60s Time Operating Storage temperature range temperature range –55 to +125 –55 to +125  The storage temperature range is for after the assembly. Individual weight 1 mg Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (3/4) 20200726 suppression-filter_automotive_mdf1005_en.fm E M C C o m p o n e n t s REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is less than 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products described in this catalog are intended to be installed in automobiles or automotive electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) and to be used in automobiles (including the case where the said automotive product is mounted in a vehicle) or standard applications as general electronic equipment in automotive applications or standard applications as general electronic equipment in automotive applications in accordance with the scope and conditions described in this specification, while the said automotive or general electronic equipment including the said product is intended to be used in the usual operation and usage methods, respectively. Other than automotive or automotive products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality requires a more stringent level of safety or reliability, or whose failure, malfunction or defect could cause serious damage to society, person or property. Please understand that we are not responsible for any damage or liability caused by use of the products in any of the applications below or for any other use exceeding the range or conditions set forth in this specification sheet. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in this specification, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment   (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (4/4) 20200726 suppression-filter_automotive_mdf1005_en.fm