E M C
C o m p o n e n t s
June 2017
3-terminal Filters, SMD Array
For signal line (cellular band compatible)
MEA-LC Series
MEA1210LC Type
MEA1210LC
1210[0504 inch]*
* Dimensions Code JIS[EIA]
Caution
The products in this catalog will be or have been
stopped production
Discontinue Issue Date
May 18, 2017
Last Purchase Order Date
Mar. 29, 2019
Last Shipment Date
Sep. 30, 2019
Please refer to our Web site about replacement information.
(2/7)
E M C
C o m p o n e n t s
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
pr
od
u
st cts
op w
pe il
d lb
pr e
od or
uc ha
tio ve
n
be
en
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
Th
e
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
20170612 / 3tf_commercial_signal_mea1210lc_en.fm
(3/7)
E M C
C o m p o n e n t s
Product compatible with RoHS directive
Halogen-free
Compatible with lead-free solders
3-terminal Filters, SMD Array
For signal line (cellular band compatible)
pr
od
u
st cts
op w
pe il
d lb
pr e
od or
uc ha
tio ve
n
be
en
Overview of MEA1210LC Type
FEATURES
Single chip for 2-line filters, and compatible with high-density mounting.
Compact with a low profile design.
Effective as a desensitization countermeasure in information transmission terminals such as smart phones.
Can be used for signal lines of mobile device displays.
APPLICATION
Noise removal from signal lines of smart phones, digital cameras, PCs, game machines, flat TVs, etc.
PART NUMBER CONSTRUCTION
MEA
Series name
1210
L×W×T Dimensions
(mm)
1210
1.2×1.0×0.5
LC
220
Product internal
code
LC
Capacitance
(pF)
220
25
150
15
T
001
Packaging style
Internal code
T
Taping
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Package quantity
Individual weight
(pieces/reel)
4,000
（mg）
3
Th
e
Temperature range
Operating
Storage
Type
temperature
temperature
（°C）
（°C）
MEA1210LC
–40 to +85
–40 to +85
The Storage temperature range is for after the circuit board is mounted.
RoHS Directive Compliant Product: See the following for more details.https://product.tdk.com/info/en/environment/rohs/index.html
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20170612 / 3tf_commercial_signal_mea1210lc_en.fm
(4/7)
E M C
C o m p o n e n t s
MEA1210LC Type
RECOMMENDED REFLOW PROFILE
Soldering
Natural
cooling
pr
od
u
st cts
op w
pe il
d lb
pr e
od or
uc ha
tio ve
n
be
en
Preheating
Peak
T: Temperature
T4
T3
T2
T1
t1
T3
t3
t2
t: Time
Time
t1
60 to 120s
Soldering
Temp.
Time
T3
t2
230°C
30 to 60s
Peak
Temp.
T4
250 to 260°C
Time
t3
10s max.
Th
e
Preheating
Temp.
T1
T2
150°C
180°C
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20170612 / 3tf_commercial_signal_mea1210lc_en.fm
(5/7)
E M C
C o m p o n e n t s
MEA1210LC Type
SHAPE & DIMENSIONS
GND
CH1
CH2
1.0±0.15
pr
od
u
st cts
op w
pe il
d lb
pr e
od or
uc ha
tio ve
n
be
en
GND
0.1min.
0.25±0.1
1.2±0.15
0.1min.
0.5±0.1
0.65±0.05
0.35±0.1
0.15min.
Dimensions in mm
RECOMMENDED LAND PATTERN
CIRCUIT DIAGRAM
0.65
CH1
CH2
0.3
GND
0.25
0.6
0.5
GND
0.9
1.8
Th
e
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20170612 / 3tf_commercial_signal_mea1210lc_en.fm
(6/7)
E M C
C o m p o n e n t s
MEA1210LC Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
(pF)
22
15
10
Cutoff frequency
Insertion loss 20dB
frequency range
Rated voltage
Rated current
Part No.
(MHz)typ.
210
240
270
(MHz)
800 to 3000
800 to 3000
800 to 3000
(V)max.
6.3
6.3
6.3
(mA)max.
100
100
100
MEA1210LC220T001
MEA1210LC150T001
MEA1210LC100T001
pr
od
u
st cts
op w
pe il
d lb
pr e
od or
uc ha
tio ve
n
be
en
Capacitance
○ Measurement equipment
Measurement item
Product No.
Capacitance
4294A
Frequency characteristics
N5230C
＊ Equivalent measurement equipment may be used.
Manufacturer
Keysight Technologies
Keysight Technologies
INSERTION LOSS VS. FREQUENCY CHARACTERISTICS
0
Insertion loss (dB)
10
20
30
40
100
50
150
220
Th
e
60
10
100
1000
10000
Frequency (MHz)
○ Measurement equipment
Product No.
Manufacturer
N5230C
Keysight Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20170612 / 3tf_commercial_signal_mea1210lc_en.fm
(7/7)
E M C
C o m p o n e n t s
MEA1210LC Type
PACKAGING STYLE
pr
od
u
st cts
op w
pe il
d lb
pr e
od or
uc ha
tio ve
n
be
en
REEL DIMENSIONS
ø60min.
2.0±0.5
1.0
8.4 +2.0
–0.0
ø13±0.2
ø21±0.8
14.4max.
ø180±2.0
Dimensions in mm
B
3.5±0.05
4.0±0.1
A
8.0±0.3
2.0±0.05
1.5 +0.1
0
1.75±0.1
TAPE DIMENSIONS
4.0±0.1
K
Dimensions in mm
Type
MEA1210LC
160min.
A
1.20±0.05
Taping
Drawing direction
B
1.45±0.05
K
0.73max.
200min.
300min.
Th
e
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20170612 / 3tf_commercial_signal_mea1210lc_en.fm
